From: Andrej Picej <andrej.picej@norik.com>
To: support.opensource@diasemi.com, linux@roeck-us.net,
linux-watchdog@vger.kernel.org
Cc: andrej.picej@norik.com, wim@linux-watchdog.org,
linux-kernel@vger.kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/4] dt-bindings: watchdog: da9062: add watchdog timeout mode
Date: Wed, 1 Dec 2021 09:15:11 +0100 [thread overview]
Message-ID: <20211201081512.3580837-3-andrej.picej@norik.com> (raw)
In-Reply-To: <20211201081512.3580837-1-andrej.picej@norik.com>
Document the watchdog timeout mode property. If this property is used
the user can select what happens on watchdog timeout. Set this property
to 1 to enable SHUTDOWN (the device resets), set it to 0 and the device
will go to POWERDOWN on watchdog timeout.
If this property is not set, don't touch the WATCHDOG_SD bit and leave
the configuration to OTP. This way backward compatibility is not broken.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
---
Changes in v3:
- add note about using the default OTP setting if this DT binding is
not specified
Changes in v2:
- new patch, document new DT binding
---
Documentation/devicetree/bindings/watchdog/da9062-wdt.txt | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
index 950e4fba8dbc..354314d854ef 100644
--- a/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/da9062-wdt.txt
@@ -10,6 +10,12 @@ Optional properties:
- dlg,use-sw-pm: Add this property to disable the watchdog during suspend.
Only use this option if you can't use the watchdog automatic suspend
function during a suspend (see register CONTROL_B).
+- dlg,wdt-sd: Set what happens on watchdog timeout. If this bit is set the
+ watchdog timeout triggers SHUTDOWN, if cleared the watchdog triggers
+ POWERDOWN. Can be 0 or 1. Only use this option if you want to change the
+ default chip's OTP setting for WATCHDOG_SD bit. If this property is NOT
+ set the WATCHDOG_SD bit and on timeout watchdog behavior will match the
+ chip's OTP settings.
Example: DA9062
--
2.25.1
next prev parent reply other threads:[~2021-12-01 8:15 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-01 8:15 [PATCH v3 1/4] mfd: da9062: make register CONFIG_I writable Andrej Picej
2021-12-01 8:15 ` [PATCH v3 2/4] watchdog: da9062: reset board on watchdog timeout Andrej Picej
2021-12-01 20:05 ` Adam Thomson
2021-12-02 8:31 ` Andrej Picej
2021-12-01 21:26 ` Guenter Roeck
2021-12-02 8:34 ` Andrej Picej
[not found] ` <13e0b9047f114722a0b4ebb4c1d24f2b@dh-electronics.com>
2021-12-02 7:43 ` Andrej Picej
2021-12-02 12:12 ` Adam Thomson
2021-12-01 8:15 ` Andrej Picej [this message]
2021-12-01 8:15 ` [PATCH v3 4/4] ARM: dts: imx6: phycore-som: set watchdog timeout mode to shutdown Andrej Picej
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211201081512.3580837-3-andrej.picej@norik.com \
--to=andrej.picej@norik.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=support.opensource@diasemi.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).