* [PATCH 1/5] arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI
2021-12-01 18:21 [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Jernej Skrabec
@ 2021-12-01 18:21 ` Jernej Skrabec
2021-12-01 18:21 ` [PATCH 2/5] dt-bindings: arm: sunxi: Add Tanix TX6 mini Jernej Skrabec
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jernej Skrabec @ 2021-12-01 18:21 UTC (permalink / raw)
To: mripard, wens
Cc: robh+dt, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
Jernej Skrabec
There is another very similar device to Tanix TX6, namely Tanix TX6
mini. Because most of the board design is shared, it makes sense to have
common nodes in DTSI file.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
.../dts/allwinner/sun50i-h6-tanix-tx6.dts | 164 +----------------
.../boot/dts/allwinner/sun50i-h6-tanix.dtsi | 173 ++++++++++++++++++
2 files changed, 174 insertions(+), 163 deletions(-)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index 7c37aa4c60cb..a6e69f4b2666 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -3,175 +3,13 @@
/dts-v1/;
-#include "sun50i-h6.dtsi"
-#include "sun50i-h6-cpu-opp.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
+#include "sun50i-h6-tanix.dtsi"
/ {
model = "Tanix TX6";
compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- /* used for FD650 LED display driver */
- i2c {
- compatible = "i2c-gpio";
- sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
- scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
- i2c-gpio,delay-us = <5>;
- };
-
- reg_vcc1v8: regulator-vcc1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- reg_vcc3v3: regulator-vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
- compatible = "regulator-fixed";
- regulator-name = "vdd-cpu-gpu";
- regulator-min-microvolt = <1135000>;
- regulator-max-microvolt = <1135000>;
- };
-
- sound-spdif {
- compatible = "simple-audio-card";
- simple-audio-card,name = "sun50i-h6-spdif";
-
- simple-audio-card,cpu {
- sound-dai = <&spdif>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&spdif_out>;
- };
- };
-
- spdif_out: spdif-out {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- };
-};
-
-&cpu0 {
- cpu-supply = <®_vdd_cpu_gpu>;
-};
-
-&de {
- status = "okay";
-};
-
-&dwc3 {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci3 {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <®_vdd_cpu_gpu>;
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v3>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- status = "okay";
-};
-
-&mmc2 {
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc1v8>;
- bus-width = <8>;
- non-removable;
- cap-mmc-hw-reset;
- mmc-hs200-1_8v;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci3 {
- status = "okay";
-};
-
-&pio {
- vcc-pc-supply = <®_vcc1v8>;
- vcc-pd-supply = <®_vcc3v3>;
- vcc-pg-supply = <®_vcc1v8>;
};
&r_ir {
linux,rc-map-name = "rc-tanix-tx5max";
- status = "okay";
-};
-
-&spdif {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
-};
-
-&usb2otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb2phy {
- status = "okay";
-};
-
-&usb3phy {
- status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
new file mode 100644
index 000000000000..166b6a7a586c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ /* used for FD650 LED display driver */
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
+ scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
+ i2c-gpio,delay-us = <5>;
+ };
+
+ reg_vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu-gpu";
+ regulator-min-microvolt = <1135000>;
+ regulator-max-microvolt = <1135000>;
+ };
+
+ sound-spdif {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sun50i-h6-spdif";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpu_gpu>;
+};
+
+&de {
+ status = "okay";
+};
+
+&dwc3 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <®_vdd_cpu_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ mmc-hs200-1_8v;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&pio {
+ vcc-pc-supply = <®_vcc1v8>;
+ vcc-pd-supply = <®_vcc3v3>;
+ vcc-pg-supply = <®_vcc1v8>;
+};
+
+&r_ir {
+ status = "okay";
+};
+
+&spdif {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
+
+&usb2otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb2phy {
+ status = "okay";
+};
+
+&usb3phy {
+ status = "okay";
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 2/5] dt-bindings: arm: sunxi: Add Tanix TX6 mini
2021-12-01 18:21 [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Jernej Skrabec
2021-12-01 18:21 ` [PATCH 1/5] arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI Jernej Skrabec
@ 2021-12-01 18:21 ` Jernej Skrabec
2021-12-01 18:21 ` [PATCH 3/5] arm64: dts: allwinner: h6: Add Tanix TX6 mini dts Jernej Skrabec
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jernej Skrabec @ 2021-12-01 18:21 UTC (permalink / raw)
To: mripard, wens
Cc: robh+dt, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
Jernej Skrabec
Tanix TX6 mini is, as its name suggest, very similar to Tanix TX6, but
with less features. It misses bluetooth support, it has less RAM, wifi
supports only 2.4G, it comes with different IR remote, etc.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 889128acf49a..c8a3102c0fde 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -808,6 +808,11 @@ properties:
- const: oranth,tanix-tx6
- const: allwinner,sun50i-h6
+ - description: Tanix TX6 mini
+ items:
+ - const: oranth,tanix-tx6-mini
+ - const: allwinner,sun50i-h6
+
- description: TBS A711 Tablet
items:
- const: tbs-biometrics,a711
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 3/5] arm64: dts: allwinner: h6: Add Tanix TX6 mini dts
2021-12-01 18:21 [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Jernej Skrabec
2021-12-01 18:21 ` [PATCH 1/5] arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI Jernej Skrabec
2021-12-01 18:21 ` [PATCH 2/5] dt-bindings: arm: sunxi: Add Tanix TX6 mini Jernej Skrabec
@ 2021-12-01 18:21 ` Jernej Skrabec
2021-12-01 18:21 ` [PATCH 4/5] arm64: dts: allwinner: h6: tanix: Add MMC1 node Jernej Skrabec
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jernej Skrabec @ 2021-12-01 18:21 UTC (permalink / raw)
To: mripard, wens
Cc: robh+dt, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
Jernej Skrabec
Tanix TX6 mini is less capable version of Tanix TX6 although it comes
with some features not present on Tanix TX6.
Basic specs:
- H6 SoC
- 2 GiB DDR3 RAM
- HDMI
- SPDIF
- 2x USB
- analogue audio
- CVBS
- SD card
- IR remote
- LED display
- fast ethernet
- XR819 wifi
- 16 GiB eMMC
Currently supported features doesn't differ that much from Tanix TX6,
but that will change soon.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../dts/allwinner/sun50i-h6-tanix-tx6-mini.dts | 15 +++++++++++++++
2 files changed, 16 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index a96d9d2d8dd8..8fa5c060a4fe 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -37,3 +37,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
new file mode 100644
index 000000000000..08d84160d88f
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6-mini.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
+
+/dts-v1/;
+
+#include "sun50i-h6-tanix.dtsi"
+
+/ {
+ model = "Tanix TX6 mini";
+ compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6";
+};
+
+&r_ir {
+ linux,rc-map-name = "rc-tanix-tx3mini";
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 4/5] arm64: dts: allwinner: h6: tanix: Add MMC1 node
2021-12-01 18:21 [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Jernej Skrabec
` (2 preceding siblings ...)
2021-12-01 18:21 ` [PATCH 3/5] arm64: dts: allwinner: h6: Add Tanix TX6 mini dts Jernej Skrabec
@ 2021-12-01 18:21 ` Jernej Skrabec
2021-12-01 18:21 ` [PATCH 5/5] arm64: dts: allwinner: h6: tanix-tx6: Enable bluetooth Jernej Skrabec
2021-12-03 9:55 ` [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Maxime Ripard
5 siblings, 0 replies; 7+ messages in thread
From: Jernej Skrabec @ 2021-12-01 18:21 UTC (permalink / raw)
To: mripard, wens
Cc: robh+dt, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
Jernej Skrabec
Both, Tanix TX6 and Tanix TX6 mini, have SDIO wifi module, albeit
different. However, driver can be autoprobed via SDIO ID.
Add MMC1 node, so kernel can discover wifi module and load driver for
it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
.../boot/dts/allwinner/sun50i-h6-tanix.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
index 166b6a7a586c..edb71e4a0304 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix.dtsi
@@ -75,6 +75,13 @@ spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+ };
};
&cpu0 {
@@ -121,6 +128,15 @@ &mmc0 {
status = "okay";
};
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
&mmc2 {
vmmc-supply = <®_vcc3v3>;
vqmmc-supply = <®_vcc1v8>;
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH 5/5] arm64: dts: allwinner: h6: tanix-tx6: Enable bluetooth
2021-12-01 18:21 [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Jernej Skrabec
` (3 preceding siblings ...)
2021-12-01 18:21 ` [PATCH 4/5] arm64: dts: allwinner: h6: tanix: Add MMC1 node Jernej Skrabec
@ 2021-12-01 18:21 ` Jernej Skrabec
2021-12-03 9:55 ` [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Maxime Ripard
5 siblings, 0 replies; 7+ messages in thread
From: Jernej Skrabec @ 2021-12-01 18:21 UTC (permalink / raw)
To: mripard, wens
Cc: robh+dt, devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
Jernej Skrabec
Tanix TX6 comes either with RTL8822BS or RTL8822CS wifi+bt combo module.
Wifi part is already enabled in tanix DTSI. Let's enable also bluetooth.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
.../boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index a6e69f4b2666..9a38ff9b3fc7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -13,3 +13,17 @@ / {
&r_ir {
linux,rc-map-name = "rc-tanix-tx5max";
};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ };
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6
2021-12-01 18:21 [PATCH 0/5] arm64: dts: allwinner: h6: tanix tx6 Jernej Skrabec
` (4 preceding siblings ...)
2021-12-01 18:21 ` [PATCH 5/5] arm64: dts: allwinner: h6: tanix-tx6: Enable bluetooth Jernej Skrabec
@ 2021-12-03 9:55 ` Maxime Ripard
5 siblings, 0 replies; 7+ messages in thread
From: Maxime Ripard @ 2021-12-03 9:55 UTC (permalink / raw)
To: Jernej Skrabec, mripard, wens
Cc: Maxime Ripard, linux-sunxi, linux-kernel, devicetree,
linux-arm-kernel, robh+dt
On Wed, 1 Dec 2021 19:21:13 +0100, Jernej Skrabec wrote:
> This series adds new Tanix TX6 mini DT file (less capable as Tanix TX6),
> adds MMC1 node for wifi and enables bluetooth on Tanix TX6 (no bluetooth
> on mini).
>
> Please take a look.
>
> Best regards,
> Jernej
>
> [...]
Applied to sunxi/linux.git (sunxi/dt-for-5.17).
Thanks!
Maxime
^ permalink raw reply [flat|nested] 7+ messages in thread