From: Li Yang <leoyang.li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Li Yang <leoyang.li@nxp.com>
Subject: [PATCH v2 4/8] arm64: dts: ls1028a-rdb: reorder nodes to be alphabetic
Date: Fri, 3 Dec 2021 18:17:14 -0600 [thread overview]
Message-ID: <20211204001718.8511-5-leoyang.li@nxp.com> (raw)
In-Reply-To: <20211204001718.8511-1-leoyang.li@nxp.com>
Keep these overrides node in alphabetic order in order to prevent
unnoticed duplicated nodes.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
---
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 88 ++++++++++---------
1 file changed, 46 insertions(+), 42 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 41900d351a92..7d87c90652d2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -102,6 +102,52 @@ can-transceiver {
};
};
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&enetc_mdio_pf3 {
+ /* VSC8514 QSGMII quad PHY */
+ qsgmii_phy0: ethernet-phy@10 {
+ reg = <0x10>;
+ };
+
+ qsgmii_phy1: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ qsgmii_phy2: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+
+ qsgmii_phy3: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&enetc_port0 {
+ phy-handle = <&sgmii_phy0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy0: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;
@@ -192,48 +238,6 @@ rtc@51 {
};
};
-&duart0 {
- status = "okay";
-};
-
-&duart1 {
- status = "okay";
-};
-
-&enetc_mdio_pf3 {
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
-
- /* VSC8514 QSGMII quad PHY */
- qsgmii_phy0: ethernet-phy@10 {
- reg = <0x10>;
- };
-
- qsgmii_phy1: ethernet-phy@11 {
- reg = <0x11>;
- };
-
- qsgmii_phy2: ethernet-phy@12 {
- reg = <0x12>;
- };
-
- qsgmii_phy3: ethernet-phy@13 {
- reg = <0x13>;
- };
-};
-
-&enetc_port0 {
- phy-handle = <&sgmii_phy0>;
- phy-mode = "sgmii";
- managed = "in-band-status";
- status = "okay";
-};
-
-&enetc_port2 {
- status = "okay";
-};
-
&mscc_felix {
status = "okay";
};
--
2.25.1
next prev parent reply other threads:[~2021-12-04 0:17 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-04 0:17 [PATCH v2 0/8] ls1028a device tree update Li Yang
2021-12-04 0:17 ` [PATCH v2 1/8] arm64: dts: ls1028a: Add PCIe EP nodes Li Yang
2021-12-14 5:42 ` Shawn Guo
2021-12-04 0:17 ` [PATCH v2 2/8] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source Li Yang
2021-12-14 5:46 ` Shawn Guo
2021-12-14 6:16 ` Leo Li
2021-12-14 6:20 ` Biwen Li
2021-12-04 0:17 ` [PATCH v2 3/8] arm64: dts: ls1028a: add flextimer based pwm nodes Li Yang
2021-12-04 0:17 ` Li Yang [this message]
2021-12-04 0:17 ` [PATCH v2 5/8] arm64: dts: ls1028a-rdb: enable pwm0 Li Yang
2021-12-04 0:17 ` [PATCH v2 6/8] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus Li Yang
2021-12-14 5:48 ` Shawn Guo
2021-12-04 0:17 ` [PATCH v2 7/8] arm64: dts: ls1028a-qds: enable lpuart1 Li Yang
2021-12-04 12:01 ` Vladimir Oltean
2021-12-04 0:17 ` [PATCH v2 8/8] arm64: dts: ls1028a-qds: add overlays for various serdes protocols Li Yang
2021-12-14 7:21 ` Shawn Guo
2021-12-14 8:14 ` Leo Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211204001718.8511-5-leoyang.li@nxp.com \
--to=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).