linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Rob Herring <robh+dt@kernel.org>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Frank Rowand <frowand.list@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Ansuel Smith <ansuelsmth@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH 7/8] arm64: dts: ls1028a: sl28: get MAC addresses from VPD
Date: Tue, 28 Dec 2021 15:25:48 +0100	[thread overview]
Message-ID: <20211228142549.1275412-8-michael@walle.cc> (raw)
In-Reply-To: <20211228142549.1275412-1-michael@walle.cc>

Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.

There are 8 reserved MAC addresses in total per board. Distribute them
as follows:

+----------+------+------+------+------+------+
|          | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 |   +0 |      |      |   +0 |   +0 |
| enetc #1 |      |      |   +0 |   +1 |   +1 |
| enetc #2 | rand | rand | rand | rand | rand |
| enetc #3 |      |      |      |      |      |
| felix p0 |      |   +0 |      |      |   +4 |
| felix p1 |      |   +1 |      |      |   +5 |
| felix p2 |      |      |      |      |   +6 |
| felix p3 |      |      |      |      |   +7 |
| felix p4 |      |      |      |      |      |
| felix p5 |      |      |      |      |      |
+----------+------+------+------+------+------+

An empty cell means, the port is not available and thus doesn't need an
ethernet address.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts       |  8 ++++++++
 .../freescale/fsl-ls1028a-kontron-sl28-var1.dts |  2 ++
 .../freescale/fsl-ls1028a-kontron-sl28-var2.dts |  4 ++++
 .../freescale/fsl-ls1028a-kontron-sl28-var4.dts |  2 ++
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts  | 17 +++++++++++++++++
 5 files changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index 0bcf97772995..6f08d3442309 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -76,6 +76,8 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 4>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,6 +86,8 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 5>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -92,6 +96,8 @@ &mscc_felix_port2 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 6>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -100,6 +106,8 @@ &mscc_felix_port3 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
+	nvmem-cells = <&base_mac_address 7>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 7cd29ab970d9..1f34c7553459 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,5 +55,7 @@ &enetc_port0 {
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index 330e34f933a3..0ed0d2545922 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -48,6 +48,8 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,6 +58,8 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 9b5e92fb753e..a4421db3784e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,5 +43,7 @@ vddh: vddh-regulator {
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
+	nvmem-cells = <&base_mac_address 1>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 63e005dd5aae..81b5f735d22e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -108,6 +108,8 @@ &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
+	nvmem-cells = <&base_mac_address 0>;
+	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -170,6 +172,21 @@ partition@3e0000 {
 				label = "bootloader environment";
 			};
 		};
+
+		otp-1 {
+			compatible = "kontron,sl28-vpd", "user-otp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			serial@2 {
+				reg = <2 15>;
+			};
+
+			base_mac_address: base-mac-address@17 {
+				#nvmem-cell-cells = <1>;
+				reg = <17 6>;
+			};
+		};
 	};
 };
 
-- 
2.30.2


  parent reply	other threads:[~2021-12-28 14:26 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-28 14:25 [PATCH 0/8] nvmem: add ethernet address offset support Michael Walle
2021-12-28 14:25 ` [PATCH 1/8] of: base: add of_parse_phandle_with_optional_args() Michael Walle
2022-01-10 19:06   ` Rob Herring
2021-12-28 14:25 ` [PATCH 2/8] dt-bindings: nvmem: add transformation bindings Michael Walle
2021-12-29 17:34   ` Rob Herring
2022-01-04 15:03   ` Rob Herring
2022-01-05  8:25     ` Michael Walle
2022-01-05 14:20       ` Rob Herring
2021-12-28 14:25 ` [PATCH 3/8] nvmem: core: add an index parameter to the cell Michael Walle
2021-12-28 14:25 ` [PATCH 4/8] nvmem: core: add transformations support Michael Walle
2021-12-28 14:25 ` [PATCH 5/8] net: add helper eth_addr_add() Michael Walle
2022-01-25 10:24   ` Rafał Miłecki
2022-08-25  9:46     ` Michael Walle
2021-12-28 14:25 ` [PATCH 6/8] nvmem: transformations: ethernet address offset support Michael Walle
2022-01-25 12:08   ` Rafał Miłecki
2022-01-25 14:59     ` Michael Walle
2021-12-28 14:25 ` Michael Walle [this message]
2021-12-28 14:25 ` [PATCH 8/8] arm64: defconfig: enable NVMEM transformations Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211228142549.1275412-8-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=andrew@lunn.ch \
    --cc=ansuelsmth@gmail.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=frowand.list@gmail.com \
    --cc=kuba@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=netdev@vger.kernel.org \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).