[PATCH AUTOSEL 4.19 1/5] usb: mtu3: fix interval value for intr and isoc

[PATCH AUTOSEL 4.19 1/5] usb: mtu3: fix interval value for intr and isoc

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit e3d4621c22f90c33321ae6a6baab60cdb8e5a77c ]

Use the Interval value from isoc/intr endpoint descriptor, no need
minus one. The original code doesn't cause transfer error for
normal cases, but it may have side effect with respond time of ERDY
or tPingTimeout.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/mtu3/mtu3_gadget.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 270721cf229f7..c5c864a02a763 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -82,7 +82,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 		if (usb_endpoint_xfer_int(desc) ||
 				usb_endpoint_xfer_isoc(desc)) {
 			interval = desc->bInterval;
-			interval = clamp_val(interval, 1, 16) - 1;
+			interval = clamp_val(interval, 1, 16);
 			if (usb_endpoint_xfer_isoc(desc) && comp_desc)
 				mult = comp_desc->bmAttributes;
 		}
@@ -94,7 +94,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
 		if (usb_endpoint_xfer_isoc(desc) ||
 				usb_endpoint_xfer_int(desc)) {
 			interval = desc->bInterval;
-			interval = clamp_val(interval, 1, 16) - 1;
+			interval = clamp_val(interval, 1, 16);
 			mult = usb_endpoint_maxp_mult(desc) - 1;
 		}
 		break;
-- 
2.34.1

[PATCH AUTOSEL 4.19 2/5] scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

[Sasha Levin]

From: Lixiaokeng <lixiaokeng@huawei.com>

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ]

|- iscsi_if_destroy_conn            |-dev_attr_show
 |-iscsi_conn_teardown
  |-spin_lock_bh                     |-iscsi_sw_tcp_conn_get_param

  |-kfree(conn->persistent_address)   |-iscsi_conn_get_param
  |-kfree(conn->local_ipaddr)
                                       ==>|-read persistent_address
                                       ==>|-read local_ipaddr
  |-spin_unlock_bh

When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a
UAF may be triggered.

Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com
Reported-by: Lu Tixiong <lutianxiong@huawei.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Lixiaokeng <lixiaokeng@huawei.com>
Signed-off-by: Linfeilong <linfeilong@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 5607fe8541c3a..cb314e3a0fc7a 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -2986,6 +2986,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 {
 	struct iscsi_conn *conn = cls_conn->dd_data;
 	struct iscsi_session *session = conn->session;
+	char *tmp_persistent_address = conn->persistent_address;
+	char *tmp_local_ipaddr = conn->local_ipaddr;
 
 	del_timer_sync(&conn->transport_timer);
 
@@ -3007,8 +3009,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 	spin_lock_bh(&session->frwd_lock);
 	free_pages((unsigned long) conn->data,
 		   get_order(ISCSI_DEF_MAX_RECV_SEG_LEN));
-	kfree(conn->persistent_address);
-	kfree(conn->local_ipaddr);
 	/* regular RX path uses back_lock */
 	spin_lock_bh(&session->back_lock);
 	kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task,
@@ -3020,6 +3020,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn)
 	mutex_unlock(&session->eh_mutex);
 
 	iscsi_destroy_conn(cls_conn);
+	kfree(tmp_persistent_address);
+	kfree(tmp_local_ipaddr);
 }
 EXPORT_SYMBOL_GPL(iscsi_conn_teardown);
 
-- 
2.34.1

[PATCH AUTOSEL 4.19 3/5] ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate

[Sasha Levin]

From: William Zhao <wizhao@redhat.com>

[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ]

The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.

The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================

The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.

Signed-off-by: William Zhao <wizhao@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ip6_vti.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c
index 290badfe70e06..866ce815625e5 100644
--- a/net/ipv6/ip6_vti.c
+++ b/net/ipv6/ip6_vti.c
@@ -799,6 +799,8 @@ vti6_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	struct net *net = dev_net(dev);
 	struct vti6_net *ip6n = net_generic(net, vti6_net_id);
 
+	memset(&p1, 0, sizeof(p1));
+
 	switch (cmd) {
 	case SIOCGETTUNNEL:
 		if (dev == ip6n->fb_tnl_dev) {
-- 
2.34.1

[PATCH AUTOSEL 4.19 4/5] net: udp: fix alignment problem in udp4_seq_show()

[Sasha Levin]

From: yangxingwu <xingwu.yang@gmail.com>

[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ]

$ cat /pro/net/udp

before:

  sl  local_address rem_address   st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000

after:

   sl  local_address rem_address   st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000

Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/udp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index fce32f3e42b54..b7acb6afdbce6 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2845,7 +2845,7 @@ int udp4_seq_show(struct seq_file *seq, void *v)
 {
 	seq_setwidth(seq, 127);
 	if (v == SEQ_START_TOKEN)
-		seq_puts(seq, "  sl  local_address rem_address   st tx_queue "
+		seq_puts(seq, "   sl  local_address rem_address   st tx_queue "
 			   "rx_queue tr tm->when retrnsmt   uid  timeout "
 			   "inode ref pointer drops");
 	else {
-- 
2.34.1

[PATCH AUTOSEL 4.19 5/5] mISDN: change function names to avoid conflicts

[Sasha Levin]

From: wolfgang huang <huangjinhui@kylinos.cn>

[ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ]

As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.

mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1

Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/core.c   | 6 +++---
 drivers/isdn/mISDN/core.h   | 4 ++--
 drivers/isdn/mISDN/layer1.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/isdn/mISDN/core.c b/drivers/isdn/mISDN/core.c
index faf505462a4f5..f5a06a6fb297f 100644
--- a/drivers/isdn/mISDN/core.c
+++ b/drivers/isdn/mISDN/core.c
@@ -390,7 +390,7 @@ mISDNInit(void)
 	err = mISDN_inittimer(&debug);
 	if (err)
 		goto error2;
-	err = l1_init(&debug);
+	err = Isdnl1_Init(&debug);
 	if (err)
 		goto error3;
 	err = Isdnl2_Init(&debug);
@@ -404,7 +404,7 @@ mISDNInit(void)
 error5:
 	Isdnl2_cleanup();
 error4:
-	l1_cleanup();
+	Isdnl1_cleanup();
 error3:
 	mISDN_timer_cleanup();
 error2:
@@ -417,7 +417,7 @@ static void mISDN_cleanup(void)
 {
 	misdn_sock_cleanup();
 	Isdnl2_cleanup();
-	l1_cleanup();
+	Isdnl1_cleanup();
 	mISDN_timer_cleanup();
 	class_unregister(&mISDN_class);
 
diff --git a/drivers/isdn/mISDN/core.h b/drivers/isdn/mISDN/core.h
index 52695bb81ee7a..3c039b6ade2e1 100644
--- a/drivers/isdn/mISDN/core.h
+++ b/drivers/isdn/mISDN/core.h
@@ -69,8 +69,8 @@ struct Bprotocol	*get_Bprotocol4id(u_int);
 extern int	mISDN_inittimer(u_int *);
 extern void	mISDN_timer_cleanup(void);
 
-extern int	l1_init(u_int *);
-extern void	l1_cleanup(void);
+extern int	Isdnl1_Init(u_int *);
+extern void	Isdnl1_cleanup(void);
 extern int	Isdnl2_Init(u_int *);
 extern void	Isdnl2_cleanup(void);
 
diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c
index 3192b0eb39445..284d3a9c7df7d 100644
--- a/drivers/isdn/mISDN/layer1.c
+++ b/drivers/isdn/mISDN/layer1.c
@@ -407,7 +407,7 @@ create_l1(struct dchannel *dch, dchannel_l1callback *dcb) {
 EXPORT_SYMBOL(create_l1);
 
 int
-l1_init(u_int *deb)
+Isdnl1_Init(u_int *deb)
 {
 	debug = deb;
 	l1fsm_s.state_count = L1S_STATE_COUNT;
@@ -418,7 +418,7 @@ l1_init(u_int *deb)
 }
 
 void
-l1_cleanup(void)
+Isdnl1_cleanup(void)
 {
 	mISDN_FsmFree(&l1fsm_s);
 }
-- 
2.34.1