* [esmil:visionfive-5.16.y 61/80] drivers/net/phy/motorcomm.c:163:5: warning: no previous prototype for 'genphy_config_init'
@ 2022-01-18 19:12 kernel test robot
2022-01-18 20:48 ` Emil Renner Berthing
0 siblings, 1 reply; 3+ messages in thread
From: kernel test robot @ 2022-01-18 19:12 UTC (permalink / raw)
To: Walker Chen; +Cc: kbuild-all, linux-kernel, Emil Renner Berthing
tree: https://github.com/esmil/linux visionfive-5.16.y
head: eeeb46a916e77aecbe1699537a5592746f3130f6
commit: d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299 [61/80] net: phy: motorcomm: Support the YT8521 gigabit PHY
config: ia64-randconfig-r021-20220116 (https://download.01.org/0day-ci/archive/20220119/202201190351.34Nj9vc7-lkp@intel.com/config)
compiler: ia64-linux-gcc (GCC) 11.2.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/esmil/linux/commit/d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299
git remote add esmil https://github.com/esmil/linux
git fetch --no-tags esmil visionfive-5.16.y
git checkout d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/net/phy/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All warnings (new ones prefixed by >>):
In file included from arch/ia64/include/asm/pgtable.h:153,
from include/linux/pgtable.h:6,
from arch/ia64/include/asm/uaccess.h:40,
from include/linux/uaccess.h:11,
from include/linux/sched/task.h:11,
from include/linux/sched/signal.h:9,
from include/linux/rcuwait.h:6,
from include/linux/percpu-rwsem.h:7,
from include/linux/fs.h:33,
from include/linux/compat.h:17,
from include/linux/ethtool.h:17,
from include/linux/phy.h:16,
from drivers/net/phy/motorcomm.c:10:
arch/ia64/include/asm/mmu_context.h: In function 'reload_context':
arch/ia64/include/asm/mmu_context.h:127:48: warning: variable 'old_rr4' set but not used [-Wunused-but-set-variable]
127 | unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
| ^~~~~~~
drivers/net/phy/motorcomm.c: At top level:
>> drivers/net/phy/motorcomm.c:163:5: warning: no previous prototype for 'genphy_config_init' [-Wmissing-prototypes]
163 | int genphy_config_init(struct phy_device *phydev)
| ^~~~~~~~~~~~~~~~~~
>> drivers/net/phy/motorcomm.c:195:5: warning: no previous prototype for 'yt8521_soft_reset' [-Wmissing-prototypes]
195 | int yt8521_soft_reset(struct phy_device *phydev)
| ^~~~~~~~~~~~~~~~~
>> drivers/net/phy/motorcomm.c:484:5: warning: no previous prototype for 'yt8521_suspend' [-Wmissing-prototypes]
484 | int yt8521_suspend(struct phy_device *phydev)
| ^~~~~~~~~~~~~~
>> drivers/net/phy/motorcomm.c:503:5: warning: no previous prototype for 'yt8521_resume' [-Wmissing-prototypes]
503 | int yt8521_resume(struct phy_device *phydev)
| ^~~~~~~~~~~~~
drivers/net/phy/motorcomm.c:14:33: warning: initialized field overwritten [-Woverride-init]
14 | #define MOTORCOMM_PHY_ID_MASK 0x00000fff
| ^~~~~~~~~~
drivers/net/phy/motorcomm.c:556:35: note: in expansion of macro 'MOTORCOMM_PHY_ID_MASK'
556 | .phy_id_mask = MOTORCOMM_PHY_ID_MASK,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/net/phy/motorcomm.c:14:33: note: (near initialization for 'motorcomm_phy_drvs[1].phy_id_mask')
14 | #define MOTORCOMM_PHY_ID_MASK 0x00000fff
| ^~~~~~~~~~
drivers/net/phy/motorcomm.c:556:35: note: in expansion of macro 'MOTORCOMM_PHY_ID_MASK'
556 | .phy_id_mask = MOTORCOMM_PHY_ID_MASK,
| ^~~~~~~~~~~~~~~~~~~~~
vim +/genphy_config_init +163 drivers/net/phy/motorcomm.c
> 10 #include <linux/phy.h>
11
12 #define PHY_ID_YT8511 0x0000010a
13 #define PHY_ID_YT8521 0x0000011a
14 #define MOTORCOMM_PHY_ID_MASK 0x00000fff
15
16 #define YT8511_PAGE_SELECT 0x1e
17 #define YT8511_PAGE 0x1f
18 #define YT8511_EXT_CLK_GATE 0x0c
19 #define YT8511_EXT_DELAY_DRIVE 0x0d
20 #define YT8511_EXT_SLEEP_CTRL 0x27
21
22 /* 2b00 25m from pll
23 * 2b01 25m from xtl *default*
24 * 2b10 62.m from pll
25 * 2b11 125m from pll
26 */
27 #define YT8511_CLK_125M (BIT(2) | BIT(1))
28 #define YT8511_PLLON_SLP BIT(14)
29
30 /* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */
31 #define YT8511_DELAY_RX BIT(0)
32
33 /* TX Gig-E Delay is bits 7:4, default 0x5
34 * TX Fast-E Delay is bits 15:12, default 0xf
35 * Delay = 150ps * N - 250ps
36 * On = 2000ps, off = 50ps
37 */
38 #define YT8511_DELAY_GE_TX_EN (0xf << 4)
39 #define YT8511_DELAY_GE_TX_DIS (0x2 << 4)
40 #define YT8511_DELAY_FE_TX_EN (0xf << 12)
41 #define YT8511_DELAY_FE_TX_DIS (0x2 << 12)
42
43 #define YT8521_SLEEP_SW_EN BIT(15)
44 #define YT8521_LINK_STATUS BIT(10)
45 #define YT8521_DUPLEX 0x2000
46 #define YT8521_SPEED_MODE 0xc000
47 #define YTPHY_REG_SPACE_UTP 0
48 #define YTPHY_REG_SPACE_FIBER 2
49 #define REG_PHY_SPEC_STATUS 0x11
50 /* based on yt8521 wol config register */
51 #define YTPHY_UTP_INTR_REG 0x12
52
53 #define SYS_WAKEUP_BASED_ON_ETH_PKT 0
54
55 /* to enable system WOL of phy, please define this macro to 1
56 * otherwise, define it to 0.
57 */
58 #define YTPHY_ENABLE_WOL 0
59
60 #if (YTPHY_ENABLE_WOL)
61 #undef SYS_WAKEUP_BASED_ON_ETH_PKT
62 #define SYS_WAKEUP_BASED_ON_ETH_PKT 1
63 #endif
64
65 #if (YTPHY_ENABLE_WOL)
66 enum ytphy_wol_type_e {
67 YTPHY_WOL_TYPE_LEVEL,
68 YTPHY_WOL_TYPE_PULSE,
69 YTPHY_WOL_TYPE_MAX
70 };
71 typedef enum ytphy_wol_type_e ytphy_wol_type_t;
72
73 enum ytphy_wol_width_e {
74 YTPHY_WOL_WIDTH_84MS,
75 YTPHY_WOL_WIDTH_168MS,
76 YTPHY_WOL_WIDTH_336MS,
77 YTPHY_WOL_WIDTH_672MS,
78 YTPHY_WOL_WIDTH_MAX
79 };
80 typedef enum ytphy_wol_width_e ytphy_wol_width_t;
81
82 struct ytphy_wol_cfg_s {
83 int enable;
84 int type;
85 int width;
86 };
87 typedef struct ytphy_wol_cfg_s ytphy_wol_cfg_t;
88 #endif /*(YTPHY_ENABLE_WOL)*/
89
90 static int yt8511_read_page(struct phy_device *phydev)
91 {
92 return __phy_read(phydev, YT8511_PAGE_SELECT);
93 };
94
95 static int yt8511_write_page(struct phy_device *phydev, int page)
96 {
97 return __phy_write(phydev, YT8511_PAGE_SELECT, page);
98 };
99
100 static int yt8511_config_init(struct phy_device *phydev)
101 {
102 int oldpage, ret = 0;
103 unsigned int ge, fe;
104
105 oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE);
106 if (oldpage < 0)
107 goto err_restore_page;
108
109 /* set rgmii delay mode */
110 switch (phydev->interface) {
111 case PHY_INTERFACE_MODE_RGMII:
112 ge = YT8511_DELAY_GE_TX_DIS;
113 fe = YT8511_DELAY_FE_TX_DIS;
114 break;
115 case PHY_INTERFACE_MODE_RGMII_RXID:
116 ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS;
117 fe = YT8511_DELAY_FE_TX_DIS;
118 break;
119 case PHY_INTERFACE_MODE_RGMII_TXID:
120 ge = YT8511_DELAY_GE_TX_EN;
121 fe = YT8511_DELAY_FE_TX_EN;
122 break;
123 case PHY_INTERFACE_MODE_RGMII_ID:
124 ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN;
125 fe = YT8511_DELAY_FE_TX_EN;
126 break;
127 default: /* do not support other modes */
128 ret = -EOPNOTSUPP;
129 goto err_restore_page;
130 }
131
132 ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge);
133 if (ret < 0)
134 goto err_restore_page;
135
136 /* set clock mode to 125mhz */
137 ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M);
138 if (ret < 0)
139 goto err_restore_page;
140
141 /* fast ethernet delay is in a separate page */
142 ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE);
143 if (ret < 0)
144 goto err_restore_page;
145
146 ret = __phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe);
147 if (ret < 0)
148 goto err_restore_page;
149
150 /* leave pll enabled in sleep */
151 ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL);
152 if (ret < 0)
153 goto err_restore_page;
154
155 ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP);
156 if (ret < 0)
157 goto err_restore_page;
158
159 err_restore_page:
160 return phy_restore_page(phydev, oldpage, ret);
161 }
162
> 163 int genphy_config_init(struct phy_device *phydev)
164 {
165 return genphy_read_abilities(phydev);
166 }
167
168 static int ytphy_read_ext(struct phy_device *phydev, u32 regnum)
169 {
170 int ret;
171 int val;
172
173 ret = phy_write(phydev, YT8511_PAGE_SELECT, regnum);
174 if (ret < 0)
175 return ret;
176
177 val = phy_read(phydev, YT8511_PAGE);
178
179 return val;
180 }
181
182 static int ytphy_write_ext(struct phy_device *phydev, u32 regnum, u16 val)
183 {
184 int ret;
185
186 ret = phy_write(phydev, YT8511_PAGE_SELECT, regnum);
187 if (ret < 0)
188 return ret;
189
190 ret = phy_write(phydev, YT8511_PAGE, val);
191
192 return ret;
193 }
194
> 195 int yt8521_soft_reset(struct phy_device *phydev)
196 {
197 int ret, val;
198
199 val = ytphy_read_ext(phydev, 0xa001);
200 ytphy_write_ext(phydev, 0xa001, (val & ~0x8000));
201
202 ret = genphy_soft_reset(phydev);
203 if (ret < 0)
204 return ret;
205
206 return 0;
207 }
208
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [esmil:visionfive-5.16.y 61/80] drivers/net/phy/motorcomm.c:163:5: warning: no previous prototype for 'genphy_config_init'
2022-01-18 19:12 [esmil:visionfive-5.16.y 61/80] drivers/net/phy/motorcomm.c:163:5: warning: no previous prototype for 'genphy_config_init' kernel test robot
@ 2022-01-18 20:48 ` Emil Renner Berthing
2022-01-20 5:04 ` Chen, Rong A
0 siblings, 1 reply; 3+ messages in thread
From: Emil Renner Berthing @ 2022-01-18 20:48 UTC (permalink / raw)
To: kernel test robot; +Cc: Walker Chen, kbuild-all, Linux Kernel Mailing List
On Tue, 18 Jan 2022 at 20:13, kernel test robot <lkp@intel.com> wrote:
> tree: https://github.com/esmil/linux visionfive-5.16.y
> head: eeeb46a916e77aecbe1699537a5592746f3130f6
> commit: d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299 [61/80] net: phy: motorcomm: Support the YT8521 gigabit PHY
> config: ia64-randconfig-r021-20220116 (https://download.01.org/0day-ci/archive/20220119/202201190351.34Nj9vc7-lkp@intel.com/config)
> compiler: ia64-linux-gcc (GCC) 11.2.0
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # https://github.com/esmil/linux/commit/d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299
> git remote add esmil https://github.com/esmil/linux
> git fetch --no-tags esmil visionfive-5.16.y
> git checkout d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299
> # save the config file to linux build tree
> mkdir build_dir
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/net/phy/
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
Hi,
Thanks for the report and thanks for pointing the robot at this tree!
In the future it would be great if you could point it at the
visionfive branch instead since that where new development should land
first. Right now the visionfive-5.16.y branch is only "ahead" because
5.16.1 came out before 5.17-rc1.
Thanks,
/Emil
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [esmil:visionfive-5.16.y 61/80] drivers/net/phy/motorcomm.c:163:5: warning: no previous prototype for 'genphy_config_init'
2022-01-18 20:48 ` Emil Renner Berthing
@ 2022-01-20 5:04 ` Chen, Rong A
0 siblings, 0 replies; 3+ messages in thread
From: Chen, Rong A @ 2022-01-20 5:04 UTC (permalink / raw)
To: Emil Renner Berthing, kernel test robot
Cc: Walker Chen, kbuild-all, Linux Kernel Mailing List
On 1/19/2022 4:48 AM, Emil Renner Berthing wrote:
> On Tue, 18 Jan 2022 at 20:13, kernel test robot <lkp@intel.com> wrote:
>> tree: https://github.com/esmil/linux visionfive-5.16.y
>> head: eeeb46a916e77aecbe1699537a5592746f3130f6
>> commit: d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299 [61/80] net: phy: motorcomm: Support the YT8521 gigabit PHY
>> config: ia64-randconfig-r021-20220116 (https://download.01.org/0day-ci/archive/20220119/202201190351.34Nj9vc7-lkp@intel.com/config)
>> compiler: ia64-linux-gcc (GCC) 11.2.0
>> reproduce (this is a W=1 build):
>> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>> chmod +x ~/bin/make.cross
>> # https://github.com/esmil/linux/commit/d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299
>> git remote add esmil https://github.com/esmil/linux
>> git fetch --no-tags esmil visionfive-5.16.y
>> git checkout d4993dd33c50b5ea0db8f5a8cdcd0dee5458b299
>> # save the config file to linux build tree
>> mkdir build_dir
>> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross O=build_dir ARCH=ia64 SHELL=/bin/bash drivers/net/phy/
>>
>> If you fix the issue, kindly add following tag as appropriate
>> Reported-by: kernel test robot <lkp@intel.com>
>
> Hi,
>
> Thanks for the report and thanks for pointing the robot at this tree!
>
> In the future it would be great if you could point it at the
> visionfive branch instead since that where new development should land
> first. Right now the visionfive-5.16.y branch is only "ahead" because
> 5.16.1 came out before 5.17-rc1.
>
> Thanks,
> /Emil
>
Hi Emil,
Thanks for the feedback, we'll ignore the branch visionfive-5.16.y.
Best Regards,
Rong Chen
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-20 5:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-18 19:12 [esmil:visionfive-5.16.y 61/80] drivers/net/phy/motorcomm.c:163:5: warning: no previous prototype for 'genphy_config_init' kernel test robot
2022-01-18 20:48 ` Emil Renner Berthing
2022-01-20 5:04 ` Chen, Rong A
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).