[PATCH v3 00/15] Multiple addition and improvement to ipq8064 gcc

[PATCH v3 00/15] Multiple addition and improvement to ipq8064 gcc

[Ansuel Smith]

This is an attempt in making the ipq8064 SoC actually usable. Currently
many feature are missing for this SoC and devs user off-the-tree patches
to make it work (example patch for missing clock, patch for cpufreq
driver, patch to add missing node in the dts)

I notice there was some work in modernizing the gcc driver for other
qcom target but this wasn't done for ipq806x. This does exactly this, we
drop any parent_names stuff and we switch to the parent_data way. We
also drop the pxo and cxo source clk from gcc driver and we refer to the
dts for it.

This also add all the missing feature for the nss cores and the
cryptoengine in them. It does also introduce the required flags to make
the RPM actually work and NOT reject any command. There was an attempt
in declaring these clock as core clock in the dts but this ends up in no
serial as the kernel makes these clock not accessible. We just want to
make the kernel NOT disable them if unused nothing more.

At the end we update the ipq8064 dtsi to add the pxo and cxo tag and
declare them in gcc and also fix a problem with tsens probe.

v3:
- Rework Documentation with Rob suggestions
v2:
- Fix error from Rob bot.
- Add additional commits to make qcom,gcc.yaml a template
- Squash parent_hws patch with the modernize patch
- Create gcc_pxo instead of using long define.

Ansuel Smith (15):
  dt-bindings: clock: split qcom,gcc.yaml to common and specific schema
  dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation
  dt-bindings: clock: Document qcom,gcc-ipq8064 binding
  drivers: clk: qcom: gcc-ipq806x: fix wrong naming for
    gcc_pxo_pll8_pll0
  drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data
  drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents
  drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk
  drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores
  drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock
  drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table
  dt-bindings: clock: add ipq8064 ce5 clk define
  drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks
  dt-bindings: reset: add ipq8064 ce5 resets
  drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets
  ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064

 .../bindings/clock/qcom,gcc-apq8064.yaml      |  29 +-
 .../bindings/clock/qcom,gcc-common.yaml       |  42 ++
 .../bindings/clock/qcom,gcc-ipq8064.yaml      |  76 +++
 .../devicetree/bindings/clock/qcom,gcc.yaml   |  31 +-
 arch/arm/boot/dts/qcom-ipq8064.dtsi           |   8 +-
 drivers/clk/qcom/gcc-ipq806x.c                | 638 +++++++++++++-----
 include/dt-bindings/clock/qcom,gcc-ipq806x.h  |   5 +-
 include/dt-bindings/reset/qcom,gcc-ipq806x.h  |   5 +
 8 files changed, 615 insertions(+), 219 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml

-- 
2.33.1

[PATCH v3 01/15] dt-bindings: clock: split qcom,gcc.yaml to common and specific schema

[Ansuel Smith]

Split qcom,gcc.yaml to common and specific schema to use it as a
template for schema that needs to use the gcc bindings and require
to add additional bindings.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../bindings/clock/qcom,gcc-common.yaml       | 42 +++++++++++++++++++
 .../devicetree/bindings/clock/qcom,gcc.yaml   | 25 ++---------
 2 files changed, 46 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
new file mode 100644
index 000000000000..ea1dd94d8bf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Common bindings for Qualcomm global clock control module which supports
+  the clocks, resets and power domains.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index f66d703bd913..73e3ff4979c6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -34,6 +34,9 @@ description: |
   - dt-bindings/reset/qcom,gcc-mdm9615.h
   - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
 
+allOf:
+  - $ref: "qcom,gcc-common.yaml#"
+
 properties:
   compatible:
     enum:
@@ -55,30 +58,10 @@ properties:
       - qcom,gcc-sdm630
       - qcom,gcc-sdm660
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   # Example for GCC for MSM8960:
-- 
2.33.1

[PATCH v3 02/15] dt-bindings: clock: simplify qcom,gcc-apq8064 Documentation

[Ansuel Smith]

Simplify qcon,gcc-apq8064 Documentation by using qcom,gcc-common.yaml as a
template and remove the compatible from qcom,gcc.yaml

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../bindings/clock/qcom,gcc-apq8064.yaml      | 29 +++++--------------
 .../devicetree/bindings/clock/qcom,gcc.yaml   |  3 --
 2 files changed, 7 insertions(+), 25 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 8e2eac6cbfb9..f31a260176e5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -6,6 +6,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
 
+allOf:
+  - $ref: qcom,gcc-common.yaml#
+
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
@@ -17,22 +20,12 @@ description: |
   See also:
   - dt-bindings/clock/qcom,gcc-msm8960.h
   - dt-bindings/reset/qcom,gcc-msm8960.h
+  - dt-bindings/clock/qcom,gcc-apq8084.h
+  - dt-bindings/reset/qcom,gcc-apq8084.h
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+    const: qcom,gcc-apq8084
 
   nvmem-cells:
     minItems: 1
@@ -53,21 +46,13 @@ properties:
   '#thermal-sensor-cells':
     const: 1
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
   - nvmem-cells
   - nvmem-cell-names
   - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index 73e3ff4979c6..04745bb407be 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -15,8 +15,6 @@ description: |
   power domains.
 
   See also:
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
   - dt-bindings/clock/qcom,gcc-ipq4019.h
   - dt-bindings/clock/qcom,gcc-ipq6018.h
   - dt-bindings/reset/qcom,gcc-ipq6018.h
@@ -40,7 +38,6 @@ allOf:
 properties:
   compatible:
     enum:
-      - qcom,gcc-apq8084
       - qcom,gcc-ipq4019
       - qcom,gcc-ipq6018
       - qcom,gcc-ipq8064
-- 
2.33.1

[PATCH v3 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Ansuel Smith]

Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
clocks. The gcc node is also used by the tsens driver, already documented,
to get the calib nvmem cells and the base reg from gcc. Use
qcom,gcc-common.yaml as a template and remove the compatible from
generic qcom,gcc.yaml

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 .../bindings/clock/qcom,gcc-ipq8064.yaml      | 76 +++++++++++++++++++
 .../devicetree/bindings/clock/qcom,gcc.yaml   |  3 -
 2 files changed, 76 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 000000000000..fac9c10eba0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for IPQ8064
+
+allOf:
+  - $ref: qcom,gcc-common.yaml#
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on IPQ8064.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    items:
+      - description: PXO source
+      - description: CXO source
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index 04745bb407be..98057ed9bfc1 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -18,8 +18,6 @@ description: |
   - dt-bindings/clock/qcom,gcc-ipq4019.h
   - dt-bindings/clock/qcom,gcc-ipq6018.h
   - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
   - dt-bindings/clock/qcom,gcc-msm8939.h
   - dt-bindings/clock/qcom,gcc-msm8953.h
   - dt-bindings/reset/qcom,gcc-msm8939.h
@@ -40,7 +38,6 @@ properties:
     enum:
       - qcom,gcc-ipq4019
       - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
       - qcom,gcc-mdm9607
       - qcom,gcc-msm8226
       - qcom,gcc-msm8660
-- 
2.33.1

[PATCH v3 04/15] drivers: clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0

[Ansuel Smith]

Parent gcc_pxo_pll8_pll0 had the parent definition and parent map
swapped. Fix this naming error.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index d6b7adb4be38..34cddf461dba 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -291,13 +291,13 @@ static const char * const gcc_pxo_pll3[] = {
 	"pll3",
 };
 
-static const struct parent_map gcc_pxo_pll8_pll0[] = {
+static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
 	{ P_PXO, 0 },
 	{ P_PLL8, 3 },
 	{ P_PLL0, 2 }
 };
 
-static const char * const gcc_pxo_pll8_pll0_map[] = {
+static const char * const gcc_pxo_pll8_pll0[] = {
 	"pxo",
 	"pll8_vote",
 	"pll0_vote",
@@ -1993,7 +1993,7 @@ static struct clk_rcg usb30_master_clk_src = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb30_master,
 	.clkr = {
@@ -2001,7 +2001,7 @@ static struct clk_rcg usb30_master_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_master_ref_src",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2063,7 +2063,7 @@ static struct clk_rcg usb30_utmi_clk = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb30_utmi,
 	.clkr = {
@@ -2071,7 +2071,7 @@ static struct clk_rcg usb30_utmi_clk = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_utmi_clk",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2133,7 +2133,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb,
 	.clkr = {
@@ -2141,7 +2141,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2197,7 +2197,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 	},
 	.s = {
 		.src_sel_shift = 0,
-		.parent_map = gcc_pxo_pll8_pll0,
+		.parent_map = gcc_pxo_pll8_pll0_map,
 	},
 	.freq_tbl = clk_tbl_usb,
 	.clkr = {
@@ -2205,7 +2205,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0_map,
+			.parent_names = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
-- 
2.33.1

[PATCH v3 05/15] drivers: clk: qcom: gcc-ipq806x: convert parent_names to parent_data

[Ansuel Smith]

Convert parent_names to parent_data to modernize the driver.
Where possible use parent_hws directly.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 286 ++++++++++++++++++++-------------
 1 file changed, 173 insertions(+), 113 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 34cddf461dba..828383c30322 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -25,6 +25,10 @@
 #include "clk-hfpll.h"
 #include "reset.h"
 
+static const struct clk_parent_data gcc_pxo[] = {
+	{ .fw_name = "pxo" },
+};
+
 static struct clk_pll pll0 = {
 	.l_reg = 0x30c4,
 	.m_reg = 0x30c8,
@@ -35,7 +39,7 @@ static struct clk_pll pll0 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll0",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -46,7 +50,9 @@ static struct clk_regmap pll0_vote = {
 	.enable_mask = BIT(0),
 	.hw.init = &(struct clk_init_data){
 		.name = "pll0_vote",
-		.parent_names = (const char *[]){ "pll0" },
+		.parent_hws = (const struct clk_hw*[]){
+			&pll0.clkr.hw,
+		},
 		.num_parents = 1,
 		.ops = &clk_pll_vote_ops,
 	},
@@ -62,7 +68,7 @@ static struct clk_pll pll3 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll3",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -89,7 +95,7 @@ static struct clk_pll pll8 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll8",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -100,7 +106,9 @@ static struct clk_regmap pll8_vote = {
 	.enable_mask = BIT(8),
 	.hw.init = &(struct clk_init_data){
 		.name = "pll8_vote",
-		.parent_names = (const char *[]){ "pll8" },
+		.parent_hws = (const struct clk_hw*[]){
+			&pll8.clkr.hw,
+		},
 		.num_parents = 1,
 		.ops = &clk_pll_vote_ops,
 	},
@@ -123,7 +131,7 @@ static struct hfpll_data hfpll0_data = {
 static struct clk_hfpll hfpll0 = {
 	.d = &hfpll0_data,
 	.clkr.hw.init = &(struct clk_init_data){
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.name = "hfpll0",
 		.ops = &clk_ops_hfpll,
@@ -149,7 +157,7 @@ static struct hfpll_data hfpll1_data = {
 static struct clk_hfpll hfpll1 = {
 	.d = &hfpll1_data,
 	.clkr.hw.init = &(struct clk_init_data){
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.name = "hfpll1",
 		.ops = &clk_ops_hfpll,
@@ -175,7 +183,7 @@ static struct hfpll_data hfpll_l2_data = {
 static struct clk_hfpll hfpll_l2 = {
 	.d = &hfpll_l2_data,
 	.clkr.hw.init = &(struct clk_init_data){
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.name = "hfpll_l2",
 		.ops = &clk_ops_hfpll,
@@ -194,7 +202,7 @@ static struct clk_pll pll14 = {
 	.status_bit = 16,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll14",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -205,7 +213,9 @@ static struct clk_regmap pll14_vote = {
 	.enable_mask = BIT(14),
 	.hw.init = &(struct clk_init_data){
 		.name = "pll14_vote",
-		.parent_names = (const char *[]){ "pll14" },
+		.parent_hws = (const struct clk_hw*[]){
+			&pll14.clkr.hw,
+		},
 		.num_parents = 1,
 		.ops = &clk_pll_vote_ops,
 	},
@@ -238,7 +248,7 @@ static struct clk_pll pll18 = {
 	.freq_tbl = pll18_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pll18",
-		.parent_names = (const char *[]){ "pxo" },
+		.parent_data = gcc_pxo,
 		.num_parents = 1,
 		.ops = &clk_pll_ops,
 	},
@@ -259,9 +269,9 @@ static const struct parent_map gcc_pxo_pll8_map[] = {
 	{ P_PLL8, 3 }
 };
 
-static const char * const gcc_pxo_pll8[] = {
-	"pxo",
-	"pll8_vote",
+static const struct clk_parent_data gcc_pxo_pll8[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
 };
 
 static const struct parent_map gcc_pxo_pll8_cxo_map[] = {
@@ -270,10 +280,10 @@ static const struct parent_map gcc_pxo_pll8_cxo_map[] = {
 	{ P_CXO, 5 }
 };
 
-static const char * const gcc_pxo_pll8_cxo[] = {
-	"pxo",
-	"pll8_vote",
-	"cxo",
+static const struct clk_parent_data gcc_pxo_pll8_cxo[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .fw_name = "cxo" },
 };
 
 static const struct parent_map gcc_pxo_pll3_map[] = {
@@ -286,9 +296,9 @@ static const struct parent_map gcc_pxo_pll3_sata_map[] = {
 	{ P_PLL3, 6 }
 };
 
-static const char * const gcc_pxo_pll3[] = {
-	"pxo",
-	"pll3",
+static const struct clk_parent_data gcc_pxo_pll3[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll3.clkr.hw },
 };
 
 static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
@@ -297,10 +307,10 @@ static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
 	{ P_PLL0, 2 }
 };
 
-static const char * const gcc_pxo_pll8_pll0[] = {
-	"pxo",
-	"pll8_vote",
-	"pll0_vote",
+static const struct clk_parent_data gcc_pxo_pll8_pll0[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .hw = &pll0_vote.hw },
 };
 
 static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
@@ -311,12 +321,12 @@ static const struct parent_map gcc_pxo_pll8_pll14_pll18_pll0_map[] = {
 	{ P_PLL18, 1 }
 };
 
-static const char * const gcc_pxo_pll8_pll14_pll18_pll0[] = {
-	"pxo",
-	"pll8_vote",
-	"pll0_vote",
-	"pll14",
-	"pll18",
+static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .hw = &pll0_vote.hw },
+	{ .hw = &pll14.clkr.hw },
+	{ .hw = &pll18.clkr.hw },
 };
 
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
@@ -362,7 +372,7 @@ static struct clk_rcg gsbi1_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -378,8 +388,8 @@ static struct clk_branch gsbi1_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi1_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi1_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -413,7 +423,7 @@ static struct clk_rcg gsbi2_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -429,8 +439,8 @@ static struct clk_branch gsbi2_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi2_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi2_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -464,7 +474,7 @@ static struct clk_rcg gsbi4_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -480,8 +490,8 @@ static struct clk_branch gsbi4_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi4_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi4_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -515,7 +525,7 @@ static struct clk_rcg gsbi5_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -531,8 +541,8 @@ static struct clk_branch gsbi5_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi5_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi5_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -566,7 +576,7 @@ static struct clk_rcg gsbi6_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -582,8 +592,8 @@ static struct clk_branch gsbi6_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi6_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi6_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -617,7 +627,7 @@ static struct clk_rcg gsbi7_uart_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_uart_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -633,8 +643,8 @@ static struct clk_branch gsbi7_uart_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_uart_clk",
-			.parent_names = (const char *[]){
-				"gsbi7_uart_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi7_uart_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -681,7 +691,7 @@ static struct clk_rcg gsbi1_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -697,7 +707,9 @@ static struct clk_branch gsbi1_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_qup_clk",
-			.parent_names = (const char *[]){ "gsbi1_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi1_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -730,7 +742,7 @@ static struct clk_rcg gsbi2_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -746,7 +758,9 @@ static struct clk_branch gsbi2_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_qup_clk",
-			.parent_names = (const char *[]){ "gsbi2_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi2_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -779,7 +793,7 @@ static struct clk_rcg gsbi4_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -795,7 +809,9 @@ static struct clk_branch gsbi4_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_qup_clk",
-			.parent_names = (const char *[]){ "gsbi4_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi4_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -828,7 +844,7 @@ static struct clk_rcg gsbi5_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -844,7 +860,9 @@ static struct clk_branch gsbi5_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_qup_clk",
-			.parent_names = (const char *[]){ "gsbi5_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi5_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -877,7 +895,7 @@ static struct clk_rcg gsbi6_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -893,7 +911,9 @@ static struct clk_branch gsbi6_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_qup_clk",
-			.parent_names = (const char *[]){ "gsbi6_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi6_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -926,7 +946,7 @@ static struct clk_rcg gsbi7_qup_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_qup_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -942,7 +962,9 @@ static struct clk_branch gsbi7_qup_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_qup_clk",
-			.parent_names = (const char *[]){ "gsbi7_qup_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gsbi7_qup_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1076,7 +1098,7 @@ static struct clk_rcg gp0_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp0_src",
-			.parent_names = gcc_pxo_pll8_cxo,
+			.parent_data = gcc_pxo_pll8_cxo,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
@@ -1092,7 +1114,9 @@ static struct clk_branch gp0_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp0_clk",
-			.parent_names = (const char *[]){ "gp0_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gp0_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1125,7 +1149,7 @@ static struct clk_rcg gp1_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp1_src",
-			.parent_names = gcc_pxo_pll8_cxo,
+			.parent_data = gcc_pxo_pll8_cxo,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1141,7 +1165,9 @@ static struct clk_branch gp1_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp1_clk",
-			.parent_names = (const char *[]){ "gp1_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gp1_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1174,7 +1200,7 @@ static struct clk_rcg gp2_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp2_src",
-			.parent_names = gcc_pxo_pll8_cxo,
+			.parent_data = gcc_pxo_pll8_cxo,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1190,7 +1216,9 @@ static struct clk_branch gp2_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "gp2_clk",
-			.parent_names = (const char *[]){ "gp2_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&gp2_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1228,7 +1256,7 @@ static struct clk_rcg prng_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1244,7 +1272,9 @@ static struct clk_branch prng_clk = {
 		.enable_mask = BIT(10),
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_clk",
-			.parent_names = (const char *[]){ "prng_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&prng_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 		},
@@ -1290,7 +1320,7 @@ static struct clk_rcg sdc1_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc1_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1305,7 +1335,9 @@ static struct clk_branch sdc1_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc1_clk",
-			.parent_names = (const char *[]){ "sdc1_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sdc1_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1338,7 +1370,7 @@ static struct clk_rcg sdc3_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc3_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1353,7 +1385,9 @@ static struct clk_branch sdc3_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc3_clk",
-			.parent_names = (const char *[]){ "sdc3_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sdc3_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1421,7 +1455,7 @@ static struct clk_rcg tsif_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "tsif_ref_src",
-			.parent_names = gcc_pxo_pll8,
+			.parent_data = gcc_pxo_pll8,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 		},
@@ -1436,7 +1470,9 @@ static struct clk_branch tsif_ref_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "tsif_ref_clk",
-			.parent_names = (const char *[]){ "tsif_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&tsif_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1583,7 +1619,7 @@ static struct clk_rcg pcie_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1599,7 +1635,9 @@ static struct clk_branch pcie_ref_src_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie_ref_src_clk",
-			.parent_names = (const char *[]){ "pcie_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&pcie_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1675,7 +1713,7 @@ static struct clk_rcg pcie1_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie1_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1691,7 +1729,9 @@ static struct clk_branch pcie1_ref_src_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie1_ref_src_clk",
-			.parent_names = (const char *[]){ "pcie1_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&pcie1_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1767,7 +1807,7 @@ static struct clk_rcg pcie2_ref_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie2_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1783,7 +1823,9 @@ static struct clk_branch pcie2_ref_src_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie2_ref_src_clk",
-			.parent_names = (const char *[]){ "pcie2_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&pcie2_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1864,7 +1906,7 @@ static struct clk_rcg sata_ref_src = {
 		.enable_mask = BIT(7),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_ref_src",
-			.parent_names = gcc_pxo_pll3,
+			.parent_data = gcc_pxo_pll3,
 			.num_parents = 2,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -1880,7 +1922,9 @@ static struct clk_branch sata_rxoob_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_rxoob_clk",
-			.parent_names = (const char *[]){ "sata_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sata_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1896,7 +1940,9 @@ static struct clk_branch sata_pmalive_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_pmalive_clk",
-			.parent_names = (const char *[]){ "sata_ref_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&sata_ref_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -1912,7 +1958,7 @@ static struct clk_branch sata_phy_ref_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_phy_ref_clk",
-			.parent_names = (const char *[]){ "pxo" },
+			.parent_data = gcc_pxo,
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 		},
@@ -2001,7 +2047,7 @@ static struct clk_rcg usb30_master_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_master_ref_src",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2017,7 +2063,9 @@ static struct clk_branch usb30_0_branch_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_0_branch_clk",
-			.parent_names = (const char *[]){ "usb30_master_ref_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_master_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2033,7 +2081,9 @@ static struct clk_branch usb30_1_branch_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_1_branch_clk",
-			.parent_names = (const char *[]){ "usb30_master_ref_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_master_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2071,7 +2121,7 @@ static struct clk_rcg usb30_utmi_clk = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_utmi_clk",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2087,7 +2137,9 @@ static struct clk_branch usb30_0_utmi_clk_ctl = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_0_utmi_clk_ctl",
-			.parent_names = (const char *[]){ "usb30_utmi_clk", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_utmi_clk.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2103,7 +2155,9 @@ static struct clk_branch usb30_1_utmi_clk_ctl = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_1_utmi_clk_ctl",
-			.parent_names = (const char *[]){ "usb30_utmi_clk", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb30_utmi_clk.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2141,7 +2195,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2157,7 +2211,9 @@ static struct clk_branch usb_hs1_xcvr_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_clk",
-			.parent_names = (const char *[]){ "usb_hs1_xcvr_src" },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb_hs1_xcvr_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2205,7 +2261,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 		.enable_mask = BIT(11),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_src",
-			.parent_names = gcc_pxo_pll8_pll0,
+			.parent_data = gcc_pxo_pll8_pll0,
 			.num_parents = 3,
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
@@ -2221,7 +2277,9 @@ static struct clk_branch usb_fs1_xcvr_clk = {
 		.enable_mask = BIT(9),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_clk",
-			.parent_names = (const char *[]){ "usb_fs1_xcvr_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb_fs1_xcvr_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2237,7 +2295,9 @@ static struct clk_branch usb_fs1_sys_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_sys_clk",
-			.parent_names = (const char *[]){ "usb_fs1_xcvr_src", },
+			.parent_hws = (const struct clk_hw*[]){
+				&usb_fs1_xcvr_clk_src.clkr.hw,
+			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
 			.flags = CLK_SET_RATE_PARENT,
@@ -2337,7 +2397,7 @@ static struct clk_dyn_rcg gmac_core1_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core1_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2354,8 +2414,8 @@ static struct clk_branch gmac_core1_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core1_clk",
-			.parent_names = (const char *[]){
-				"gmac_core1_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core1_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2409,7 +2469,7 @@ static struct clk_dyn_rcg gmac_core2_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core2_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2426,8 +2486,8 @@ static struct clk_branch gmac_core2_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core2_clk",
-			.parent_names = (const char *[]){
-				"gmac_core2_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core2_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2481,7 +2541,7 @@ static struct clk_dyn_rcg gmac_core3_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core3_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2498,8 +2558,8 @@ static struct clk_branch gmac_core3_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core3_clk",
-			.parent_names = (const char *[]){
-				"gmac_core3_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core3_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2553,7 +2613,7 @@ static struct clk_dyn_rcg gmac_core4_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core4_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2570,8 +2630,8 @@ static struct clk_branch gmac_core4_clk = {
 		.enable_mask = BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core4_clk",
-			.parent_names = (const char *[]){
-				"gmac_core4_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&gmac_core4_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2613,7 +2673,7 @@ static struct clk_dyn_rcg nss_tcm_src = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "nss_tcm_src",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 		},
@@ -2628,8 +2688,8 @@ static struct clk_branch nss_tcm_clk = {
 		.enable_mask = BIT(6) | BIT(4),
 		.hw.init = &(struct clk_init_data){
 			.name = "nss_tcm_clk",
-			.parent_names = (const char *[]){
-				"nss_tcm_src",
+			.parent_hws = (const struct clk_hw*[]){
+				&nss_tcm_src.clkr.hw,
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
@@ -2691,7 +2751,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core1_src_clk",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
@@ -2744,7 +2804,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
 		.enable_mask = BIT(1),
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core2_src_clk",
-			.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
+			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
 			.num_parents = 5,
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
-- 
2.33.1

[PATCH v3 06/15] drivers: clk: qcom: gcc-ipq806x: use ARRAY_SIZE for num_parents

[Ansuel Smith]

Use ARRAY_SIZE for num_parents instead of hardcoding the value.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 68 +++++++++++++++++-----------------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 828383c30322..f6db7247835e 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -373,7 +373,7 @@ static struct clk_rcg gsbi1_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -424,7 +424,7 @@ static struct clk_rcg gsbi2_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -475,7 +475,7 @@ static struct clk_rcg gsbi4_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -526,7 +526,7 @@ static struct clk_rcg gsbi5_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -577,7 +577,7 @@ static struct clk_rcg gsbi6_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -628,7 +628,7 @@ static struct clk_rcg gsbi7_uart_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_uart_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -692,7 +692,7 @@ static struct clk_rcg gsbi1_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi1_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -743,7 +743,7 @@ static struct clk_rcg gsbi2_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi2_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -794,7 +794,7 @@ static struct clk_rcg gsbi4_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -845,7 +845,7 @@ static struct clk_rcg gsbi5_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi5_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -896,7 +896,7 @@ static struct clk_rcg gsbi6_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi6_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -947,7 +947,7 @@ static struct clk_rcg gsbi7_qup_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi7_qup_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -1099,7 +1099,7 @@ static struct clk_rcg gp0_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gp0_src",
 			.parent_data = gcc_pxo_pll8_cxo,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_PARENT_GATE,
 		},
@@ -1150,7 +1150,7 @@ static struct clk_rcg gp1_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gp1_src",
 			.parent_data = gcc_pxo_pll8_cxo,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1201,7 +1201,7 @@ static struct clk_rcg gp2_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gp2_src",
 			.parent_data = gcc_pxo_pll8_cxo,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_cxo),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1257,7 +1257,7 @@ static struct clk_rcg prng_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "prng_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	},
@@ -1321,7 +1321,7 @@ static struct clk_rcg sdc1_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc1_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	}
@@ -1371,7 +1371,7 @@ static struct clk_rcg sdc3_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "sdc3_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	}
@@ -1456,7 +1456,7 @@ static struct clk_rcg tsif_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "tsif_ref_src",
 			.parent_data = gcc_pxo_pll8,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
 		},
 	}
@@ -1620,7 +1620,7 @@ static struct clk_rcg pcie_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1714,7 +1714,7 @@ static struct clk_rcg pcie1_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie1_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1808,7 +1808,7 @@ static struct clk_rcg pcie2_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "pcie2_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -1907,7 +1907,7 @@ static struct clk_rcg sata_ref_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "sata_ref_src",
 			.parent_data = gcc_pxo_pll3,
-			.num_parents = 2,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2048,7 +2048,7 @@ static struct clk_rcg usb30_master_clk_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_master_ref_src",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2122,7 +2122,7 @@ static struct clk_rcg usb30_utmi_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb30_utmi_clk",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2196,7 +2196,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_hs1_xcvr_src",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2262,7 +2262,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "usb_fs1_xcvr_src",
 			.parent_data = gcc_pxo_pll8_pll0,
-			.num_parents = 3,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0),
 			.ops = &clk_rcg_ops,
 			.flags = CLK_SET_RATE_GATE,
 		},
@@ -2398,7 +2398,7 @@ static struct clk_dyn_rcg gmac_core1_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core1_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2470,7 +2470,7 @@ static struct clk_dyn_rcg gmac_core2_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core2_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2542,7 +2542,7 @@ static struct clk_dyn_rcg gmac_core3_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core3_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2614,7 +2614,7 @@ static struct clk_dyn_rcg gmac_core4_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gmac_core4_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2674,7 +2674,7 @@ static struct clk_dyn_rcg nss_tcm_src = {
 		.hw.init = &(struct clk_init_data){
 			.name = "nss_tcm_src",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 		},
 	},
@@ -2752,7 +2752,7 @@ static struct clk_dyn_rcg ubi32_core1_src_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core1_src_clk",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
 		},
@@ -2805,7 +2805,7 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "ubi32_core2_src_clk",
 			.parent_data = gcc_pxo_pll8_pll14_pll18_pll0,
-			.num_parents = 5,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll14_pll18_pll0),
 			.ops = &clk_dyn_rcg_ops,
 			.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
 		},
-- 
2.33.1

[PATCH v3 07/15] drivers: clk: qcom: gcc-ipq806x: drop hardcoded pxo and cxo source clk

[Ansuel Smith]

We now define these clk in dts. Drop pxo and cxo hardcoded in the gcc
probe function.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index f6db7247835e..a4bf78fe8678 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -3119,23 +3119,14 @@ MODULE_DEVICE_TABLE(of, gcc_ipq806x_match_table);
 
 static int gcc_ipq806x_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
 	struct regmap *regmap;
 	int ret;
 
-	ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000);
-	if (ret)
-		return ret;
-
-	ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000);
-	if (ret)
-		return ret;
-
 	ret = qcom_cc_probe(pdev, &gcc_ipq806x_desc);
 	if (ret)
 		return ret;
 
-	regmap = dev_get_regmap(dev, NULL);
+	regmap = dev_get_regmap(&pdev->dev, NULL);
 	if (!regmap)
 		return -ENODEV;
 
-- 
2.33.1

[PATCH v3 08/15] drivers: clk: qcom: gcc-ipq806x: add additional freq nss cores

[Ansuel Smith]

Ipq8065 SoC (an evolution of ipq8064 SoC) contains nss cores that can be
clocked to 800MHz. Add these missing freq to the gcc driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index a4bf78fe8678..53a61860063d 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -232,7 +232,9 @@ static struct clk_regmap pll14_vote = {
 
 static struct pll_freq_tbl pll18_freq_tbl[] = {
 	NSS_PLL_RATE(550000000, 44, 0, 1, 0x01495625),
+	NSS_PLL_RATE(600000000, 48, 0, 1, 0x01495625),
 	NSS_PLL_RATE(733000000, 58, 16, 25, 0x014b5625),
+	NSS_PLL_RATE(800000000, 64, 0, 1, 0x01495625),
 };
 
 static struct clk_pll pll18 = {
@@ -2702,7 +2704,9 @@ static const struct freq_tbl clk_tbl_nss[] = {
 	{ 110000000, P_PLL18, 1, 1, 5 },
 	{ 275000000, P_PLL18, 2, 0, 0 },
 	{ 550000000, P_PLL18, 1, 0, 0 },
+	{ 600000000, P_PLL18, 1, 0, 0 },
 	{ 733000000, P_PLL18, 1, 0, 0 },
+	{ 800000000, P_PLL18, 1, 0, 0 },
 	{ }
 };
 
-- 
2.33.1

[PATCH v3 09/15] drivers: clk: qcom: gcc-ipq806x: add unusued flag for critical clock

[Ansuel Smith]

Some clocks are used by other devices present on the SoC. For example
the gsbi4_h_clk is used by RPM and is if disabled cause the RPM to
reject any regulator change command. These clock should never be
disabled.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 53a61860063d..77bc3d94f580 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -798,7 +798,7 @@ static struct clk_rcg gsbi4_qup_src = {
 			.parent_data = gcc_pxo_pll8,
 			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
-			.flags = CLK_SET_PARENT_GATE,
+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -816,7 +816,7 @@ static struct clk_branch gsbi4_qup_clk = {
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
-			.flags = CLK_SET_RATE_PARENT,
+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -900,7 +900,7 @@ static struct clk_rcg gsbi6_qup_src = {
 			.parent_data = gcc_pxo_pll8,
 			.num_parents = ARRAY_SIZE(gcc_pxo_pll8),
 			.ops = &clk_rcg_ops,
-			.flags = CLK_SET_PARENT_GATE,
+			.flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -969,7 +969,7 @@ static struct clk_branch gsbi7_qup_clk = {
 			},
 			.num_parents = 1,
 			.ops = &clk_branch_ops,
-			.flags = CLK_SET_RATE_PARENT,
+			.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
 		},
 	},
 };
@@ -1015,6 +1015,7 @@ static struct clk_branch gsbi4_h_clk = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gsbi4_h_clk",
 			.ops = &clk_branch_ops,
+			.flags = CLK_IGNORE_UNUSED,
 		},
 	},
 };
-- 
2.33.1

[PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Ansuel Smith]

Add additional freq supported for the sdc table.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 77bc3d94f580..dbd61e4844b0 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
 	{  20210000, P_PLL8,  1, 1,  19 },
 	{  24000000, P_PLL8,  4, 1,   4 },
 	{  48000000, P_PLL8,  4, 1,   2 },
+	{  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
 	{  64000000, P_PLL8,  3, 1,   2 },
 	{  96000000, P_PLL8,  4, 0,   0 },
 	{ 192000000, P_PLL8,  2, 0,   0 },
-- 
2.33.1

[PATCH v3 11/15] dt-bindings: clock: add ipq8064 ce5 clk define

[Ansuel Smith]

Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
index 7deec14a6dee..02262d2ac899 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -240,7 +240,7 @@
 #define PLL14					232
 #define PLL14_VOTE				233
 #define PLL18					234
-#define CE5_SRC					235
+#define CE5_A_CLK				235
 #define CE5_H_CLK				236
 #define CE5_CORE_CLK				237
 #define CE3_SLEEP_CLK				238
@@ -283,5 +283,8 @@
 #define EBI2_AON_CLK				281
 #define NSSTCM_CLK_SRC				282
 #define NSSTCM_CLK				283
+#define CE5_A_CLK_SRC				285
+#define CE5_H_CLK_SRC				286
+#define CE5_CORE_CLK_SRC			287
 
 #endif
-- 
2.33.1

[PATCH v3 12/15] drivers: clk: qcom: gcc-ipq806x: add CryptoEngine clocks

[Ansuel Smith]

Add missing CryptoEngine clocks and pll11 required clock.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 244 +++++++++++++++++++++++++++++++++
 1 file changed, 244 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index dbd61e4844b0..a86d1504a149 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -256,6 +256,24 @@ static struct clk_pll pll18 = {
 	},
 };
 
+static struct clk_pll pll11 = {
+	.l_reg = 0x3184,
+	.m_reg = 0x3188,
+	.n_reg = 0x318c,
+	.config_reg = 0x3194,
+	.mode_reg = 0x3180,
+	.status_reg = 0x3198,
+	.status_bit = 16,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "pll11",
+		.parent_data = &(const struct clk_parent_data){
+			.fw_name = "pxo",
+		},
+		.num_parents = 1,
+		.ops = &clk_pll_ops,
+	},
+};
+
 enum {
 	P_PXO,
 	P_PLL8,
@@ -264,6 +282,7 @@ enum {
 	P_CXO,
 	P_PLL14,
 	P_PLL18,
+	P_PLL11,
 };
 
 static const struct parent_map gcc_pxo_pll8_map[] = {
@@ -331,6 +350,44 @@ static const struct clk_parent_data gcc_pxo_pll8_pll14_pll18_pll0[] = {
 	{ .hw = &pll18.clkr.hw },
 };
 
+static const struct parent_map gcc_pxo_pll8_pll0_pll14_pll18_pll11_map[] = {
+	{ P_PXO, 0 },
+	{ P_PLL8, 4 },
+	{ P_PLL0, 2 },
+	{ P_PLL14, 5 },
+	{ P_PLL18, 1 },
+	{ P_PLL11, 3 },
+};
+
+static const struct clk_parent_data gcc_pxo_pll8_pll0_pll14_pll18_pll11[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll8_vote.hw },
+	{ .hw = &pll0_vote.hw },
+	{ .hw = &pll14.clkr.hw },
+	{ .hw = &pll18.clkr.hw },
+	{ .hw = &pll11.clkr.hw },
+
+};
+
+static const struct parent_map gcc_pxo_pll3_pll0_pll14_pll18_pll11_map[] = {
+	{ P_PXO, 0 },
+	{ P_PLL3, 6 },
+	{ P_PLL0, 2 },
+	{ P_PLL14, 5 },
+	{ P_PLL18, 1 },
+	{ P_PLL11, 3 },
+};
+
+static const struct clk_parent_data gcc_pxo_pll3_pll0_pll14_pll18_pll11[] = {
+	{ .fw_name = "pxo" },
+	{ .hw = &pll3.clkr.hw },
+	{ .hw = &pll0_vote.hw },
+	{ .hw = &pll14.clkr.hw },
+	{ .hw = &pll18.clkr.hw },
+	{ .hw = &pll11.clkr.hw },
+
+};
+
 static struct freq_tbl clk_tbl_gsbi_uart[] = {
 	{  1843200, P_PLL8, 2,  6, 625 },
 	{  3686400, P_PLL8, 2, 12, 625 },
@@ -2818,6 +2875,186 @@ static struct clk_dyn_rcg ubi32_core2_src_clk = {
 	},
 };
 
+static const struct freq_tbl clk_tbl_ce5_core[] = {
+	{ 150000000, P_PLL3, 8, 1, 1 },
+	{ 213200000, P_PLL11, 5, 1, 1 },
+	{ }
+};
+
+static struct clk_dyn_rcg ce5_core_src = {
+	.ns_reg[0] = 0x36C4,
+	.ns_reg[1] = 0x36C8,
+	.bank_reg = 0x36C0,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll3_pll0_pll14_pll18_pll11_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_ce5_core,
+	.clkr = {
+		.enable_reg = 0x36C0,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_core_src",
+			.parent_data = gcc_pxo_pll3_pll0_pll14_pll18_pll11,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll3_pll0_pll14_pll18_pll11),
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch ce5_core_clk = {
+	.halt_reg = 0x2FDC,
+	.halt_bit = 5,
+	.hwcg_reg = 0x36CC,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x36CC,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_core_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&ce5_core_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_ce5_a_clk[] = {
+	{ 160000000, P_PLL0, 5, 1, 1 },
+	{ 213200000, P_PLL11, 5, 1, 1 },
+	{ }
+};
+
+static struct clk_dyn_rcg ce5_a_clk_src = {
+	.ns_reg[0] = 0x3d84,
+	.ns_reg[1] = 0x3d88,
+	.bank_reg = 0x3d80,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_ce5_a_clk,
+	.clkr = {
+		.enable_reg = 0x3d80,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_a_clk_src",
+			.parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0_pll14_pll18_pll11),
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch ce5_a_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 12,
+	.hwcg_reg = 0x3d8c,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3d8c,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_a_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&ce5_a_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
+static const struct freq_tbl clk_tbl_ce5_h_clk[] = {
+	{ 160000000, P_PLL0, 5, 1, 1 },
+	{ 213200000, P_PLL11, 5, 1, 1 },
+	{ }
+};
+
+static struct clk_dyn_rcg ce5_h_clk_src = {
+	.ns_reg[0] = 0x3c64,
+	.ns_reg[1] = 0x3c68,
+	.bank_reg = 0x3c60,
+	.s[0] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.s[1] = {
+		.src_sel_shift = 0,
+		.parent_map = gcc_pxo_pll8_pll0_pll14_pll18_pll11_map,
+	},
+	.p[0] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.p[1] = {
+		.pre_div_shift = 3,
+		.pre_div_width = 4,
+	},
+	.mux_sel_bit = 0,
+	.freq_tbl = clk_tbl_ce5_h_clk,
+	.clkr = {
+		.enable_reg = 0x3c60,
+		.enable_mask = BIT(1),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_h_clk_src",
+			.parent_data = gcc_pxo_pll8_pll0_pll14_pll18_pll11,
+			.num_parents = ARRAY_SIZE(gcc_pxo_pll8_pll0_pll14_pll18_pll11),
+			.ops = &clk_dyn_rcg_ops,
+		},
+	},
+};
+
+static struct clk_branch ce5_h_clk = {
+	.halt_reg = 0x3c20,
+	.halt_bit = 11,
+	.hwcg_reg = 0x3c6c,
+	.hwcg_bit = 6,
+	.clkr = {
+		.enable_reg = 0x3c6c,
+		.enable_mask = BIT(4),
+		.hw.init = &(struct clk_init_data){
+			.name = "ce5_h_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&ce5_h_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch_ops,
+			.flags = CLK_SET_RATE_PARENT,
+		},
+	},
+};
+
 static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL0] = &pll0.clkr,
 	[PLL0_VOTE] = &pll0_vote,
@@ -2825,6 +3062,7 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL4_VOTE] = &pll4_vote,
 	[PLL8] = &pll8.clkr,
 	[PLL8_VOTE] = &pll8_vote,
+	[PLL11] = &pll11.clkr,
 	[PLL14] = &pll14.clkr,
 	[PLL14_VOTE] = &pll14_vote,
 	[PLL18] = &pll18.clkr,
@@ -2939,6 +3177,12 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
 	[PLL9] = &hfpll0.clkr,
 	[PLL10] = &hfpll1.clkr,
 	[PLL12] = &hfpll_l2.clkr,
+	[CE5_A_CLK_SRC] = &ce5_a_clk_src.clkr,
+	[CE5_A_CLK] = &ce5_a_clk.clkr,
+	[CE5_H_CLK_SRC] = &ce5_h_clk_src.clkr,
+	[CE5_H_CLK] = &ce5_h_clk.clkr,
+	[CE5_CORE_CLK_SRC] = &ce5_core_src.clkr,
+	[CE5_CORE_CLK] = &ce5_core_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-- 
2.33.1

[PATCH v3 13/15] dt-bindings: reset: add ipq8064 ce5 resets

[Ansuel Smith]

Add ipq8064 ce5 resets needed for CryptoEngine gcc driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 include/dt-bindings/reset/qcom,gcc-ipq806x.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
index 26b6f9200620..020c9cf18751 100644
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -163,5 +163,10 @@
 #define NSS_CAL_PRBS_RST_N_RESET			154
 #define NSS_LCKDT_RST_N_RESET				155
 #define NSS_SRDS_N_RESET				156
+#define CRYPTO_ENG1_RESET				157
+#define CRYPTO_ENG2_RESET				158
+#define CRYPTO_ENG3_RESET				159
+#define CRYPTO_ENG4_RESET				160
+#define CRYPTO_AHB_RESET				161
 
 #endif
-- 
2.33.1

[PATCH v3 14/15] drivers: clk: qcom: gcc-ipq806x: add CryptoEngine resets

[Ansuel Smith]

Add missing CryptoEngine resets.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/gcc-ipq806x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index a86d1504a149..8f025cef2ec3 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -3314,6 +3314,11 @@ static const struct qcom_reset_map gcc_ipq806x_resets[] = {
 	[GMAC_CORE3_RESET] = { 0x3cfc, 0 },
 	[GMAC_CORE4_RESET] = { 0x3d1c, 0 },
 	[GMAC_AHB_RESET] = { 0x3e24, 0 },
+	[CRYPTO_ENG1_RESET] = { 0x3e00, 0},
+	[CRYPTO_ENG2_RESET] = { 0x3e04, 0},
+	[CRYPTO_ENG3_RESET] = { 0x3e08, 0},
+	[CRYPTO_ENG4_RESET] = { 0x3e0c, 0},
+	[CRYPTO_AHB_RESET] = { 0x3e10, 0},
 	[NSS_CH0_RST_RX_CLK_N_RESET] = { 0x3b60, 0 },
 	[NSS_CH0_RST_TX_CLK_N_RESET] = { 0x3b60, 1 },
 	[NSS_CH0_RST_RX_125M_N_RESET] = { 0x3b60, 2 },
-- 
2.33.1

[PATCH v3 15/15] ARM: dts: qcom: Add syscon and cxo/pxo clock to gcc node for ipq8064

[Ansuel Smith]

Add syscon compatible required for tsens driver to correctly probe driver
and access the reg. Also add cxo and pxo tag and declare them as gcc clock
now requires them for the ipq8064 gcc driver that has now been modernized.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 11481313bdb6..5524a68cf3d1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -298,13 +298,13 @@ smem: smem@41000000 {
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
@@ -736,7 +736,9 @@ tsens_calib_backup: calib_backup@410 {
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064";
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-- 
2.33.1

Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Stephen Boyd]

Quoting Ansuel Smith (2022-01-21 13:03:35)
> Add additional freq supported for the sdc table.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/clk/qcom/gcc-ipq806x.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> index 77bc3d94f580..dbd61e4844b0 100644
> --- a/drivers/clk/qcom/gcc-ipq806x.c
> +++ b/drivers/clk/qcom/gcc-ipq806x.c
> @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
>         {  20210000, P_PLL8,  1, 1,  19 },
>         {  24000000, P_PLL8,  4, 1,   4 },
>         {  48000000, P_PLL8,  4, 1,   2 },
> +       {  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */

Why the comment and fake rate? Can it be 51200000 instead and drop the
comment?

Re: [PATCH v3 11/15] dt-bindings: clock: add ipq8064 ce5 clk define

[Stephen Boyd]

Quoting Ansuel Smith (2022-01-21 13:03:36)
> Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
> index 7deec14a6dee..02262d2ac899 100644
> --- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
> +++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
> @@ -240,7 +240,7 @@
>  #define PLL14                                  232
>  #define PLL14_VOTE                             233
>  #define PLL18                                  234
> -#define CE5_SRC                                        235
> +#define CE5_A_CLK                              235

Technically this is ABI and changing it is bad. I see that CE5_SRC isn't
used though so I guess it's OK.

>  #define CE5_H_CLK                              236
>  #define CE5_CORE_CLK                           237
>  #define CE3_SLEEP_CLK                          238
> @@ -283,5 +283,8 @@
>  #define EBI2_AON_CLK                           281
>  #define NSSTCM_CLK_SRC                         282
>  #define NSSTCM_CLK                             283
> +#define CE5_A_CLK_SRC                          285
> +#define CE5_H_CLK_SRC                          286
> +#define CE5_CORE_CLK_SRC                       287

Re: [PATCH v3 11/15] dt-bindings: clock: add ipq8064 ce5 clk define

[Ansuel Smith]

On Tue, Jan 25, 2022 at 12:47:26PM -0800, Stephen Boyd wrote:
> Quoting Ansuel Smith (2022-01-21 13:03:36)
> > Add ipq8064 ce5 clk define needed for CryptoEngine in gcc driver.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  include/dt-bindings/clock/qcom,gcc-ipq806x.h | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> > 
> > diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
> > index 7deec14a6dee..02262d2ac899 100644
> > --- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
> > +++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
> > @@ -240,7 +240,7 @@
> >  #define PLL14                                  232
> >  #define PLL14_VOTE                             233
> >  #define PLL18                                  234
> > -#define CE5_SRC                                        235
> > +#define CE5_A_CLK                              235
> 
> Technically this is ABI and changing it is bad. I see that CE5_SRC isn't
> used though so I guess it's OK.
>

Consider that this naming comes directly from qsdk so I really don't
know why it was called SRC from the start.

> >  #define CE5_H_CLK                              236
> >  #define CE5_CORE_CLK                           237
> >  #define CE3_SLEEP_CLK                          238
> > @@ -283,5 +283,8 @@
> >  #define EBI2_AON_CLK                           281
> >  #define NSSTCM_CLK_SRC                         282
> >  #define NSSTCM_CLK                             283
> > +#define CE5_A_CLK_SRC                          285
> > +#define CE5_H_CLK_SRC                          286
> > +#define CE5_CORE_CLK_SRC                       287

-- 
	Ansuel

Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Ansuel Smith]

On Tue, Jan 25, 2022 at 12:45:53PM -0800, Stephen Boyd wrote:
> Quoting Ansuel Smith (2022-01-21 13:03:35)
> > Add additional freq supported for the sdc table.
> > 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  drivers/clk/qcom/gcc-ipq806x.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> > index 77bc3d94f580..dbd61e4844b0 100644
> > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
> >         {  20210000, P_PLL8,  1, 1,  19 },
> >         {  24000000, P_PLL8,  4, 1,   4 },
> >         {  48000000, P_PLL8,  4, 1,   2 },
> > +       {  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
> 
> Why the comment and fake rate? Can it be 51200000 instead and drop the
> comment?

I will add the related reason in the commit.

We cannot achieve exact 52Mhz(jitter free) clock using PLL8.
As per the MND calculator the closest possible jitter free clock
using PLL8 is 51.2Mhz. This patch adds the values, which will provide
jitter free 51.2Mhz when the requested frequency is 52mhz.

-- 
	Ansuel

Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Stephen Boyd]

Quoting Ansuel Smith (2022-01-25 13:03:52)
> On Tue, Jan 25, 2022 at 12:45:53PM -0800, Stephen Boyd wrote:
> > Quoting Ansuel Smith (2022-01-21 13:03:35)
> > > Add additional freq supported for the sdc table.
> > > 
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > >  drivers/clk/qcom/gcc-ipq806x.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > > 
> > > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> > > index 77bc3d94f580..dbd61e4844b0 100644
> > > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > > @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
> > >         {  20210000, P_PLL8,  1, 1,  19 },
> > >         {  24000000, P_PLL8,  4, 1,   4 },
> > >         {  48000000, P_PLL8,  4, 1,   2 },
> > > +       {  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
> > 
> > Why the comment and fake rate? Can it be 51200000 instead and drop the
> > comment?
> 
> I will add the related reason in the commit.
> 
> We cannot achieve exact 52Mhz(jitter free) clock using PLL8.
> As per the MND calculator the closest possible jitter free clock
> using PLL8 is 51.2Mhz. This patch adds the values, which will provide
> jitter free 51.2Mhz when the requested frequency is 52mhz.

Sounds like this clk should use the round down clk_ops instead of the
round up ones. Then the actual frequency can be in the table.

Re: [PATCH v3 01/15] dt-bindings: clock: split qcom,gcc.yaml to common and specific schema

[Bjorn Andersson]

On Fri 21 Jan 15:03 CST 2022, Ansuel Smith wrote:

> Split qcom,gcc.yaml to common and specific schema to use it as a
> template for schema that needs to use the gcc bindings and require
> to add additional bindings.
> 

Nice!

> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  .../bindings/clock/qcom,gcc-common.yaml       | 42 +++++++++++++++++++
>  .../devicetree/bindings/clock/qcom,gcc.yaml   | 25 ++---------
>  2 files changed, 46 insertions(+), 21 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
> new file mode 100644
> index 000000000000..ea1dd94d8bf1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml

It seems reasonable to expect that qcom,gcc.yaml should be split out in
a number of trivial qcom,gcc-platform.yaml files to define input clock
etc. So how about using qcom,gcc.yaml for the common properties and for
now rename the existing file to something like qcom,gcc-others.yaml
?

> @@ -0,0 +1,42 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,gcc-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
> +
> +maintainers:
> +  - Stephen Boyd <sboyd@kernel.org>
> +  - Taniya Das <tdas@codeaurora.org>
> +
> +description: |

No need to preserve the formatting here, so the pipe can go.

Regards,
Bjorn

> +  Common bindings for Qualcomm global clock control module which supports
> +  the clocks, resets and power domains.
> +
> +properties:
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  protected-clocks:
> +    description:
> +      Protected clock specifier list as per common clock binding.
> +
> +required:
> +  - reg
> +  - '#clock-cells'
> +  - '#reset-cells'
> +  - '#power-domain-cells'
> +
> +additionalProperties: true
> +
> +...
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index f66d703bd913..73e3ff4979c6 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -34,6 +34,9 @@ description: |
>    - dt-bindings/reset/qcom,gcc-mdm9615.h
>    - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
>  
> +allOf:
> +  - $ref: "qcom,gcc-common.yaml#"
> +
>  properties:
>    compatible:
>      enum:
> @@ -55,30 +58,10 @@ properties:
>        - qcom,gcc-sdm630
>        - qcom,gcc-sdm660
>  
> -  '#clock-cells':
> -    const: 1
> -
> -  '#reset-cells':
> -    const: 1
> -
> -  '#power-domain-cells':
> -    const: 1
> -
> -  reg:
> -    maxItems: 1
> -
> -  protected-clocks:
> -    description:
> -      Protected clock specifier list as per common clock binding.
> -
>  required:
>    - compatible
> -  - reg
> -  - '#clock-cells'
> -  - '#reset-cells'
> -  - '#power-domain-cells'
>  
> -additionalProperties: false
> +unevaluatedProperties: false
>  
>  examples:
>    # Example for GCC for MSM8960:
> -- 
> 2.33.1
> 

Re: [PATCH v3 04/15] drivers: clk: qcom: gcc-ipq806x: fix wrong naming for gcc_pxo_pll8_pll0

[Bjorn Andersson]

On Fri 21 Jan 15:03 CST 2022, Ansuel Smith wrote:

Please drop the "drivers: " prefix in $subject on all these patches to
align it with (most) other entried in the git log.

Thanks,
Bjorn

> Parent gcc_pxo_pll8_pll0 had the parent definition and parent map
> swapped. Fix this naming error.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/clk/qcom/gcc-ipq806x.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> index d6b7adb4be38..34cddf461dba 100644
> --- a/drivers/clk/qcom/gcc-ipq806x.c
> +++ b/drivers/clk/qcom/gcc-ipq806x.c
> @@ -291,13 +291,13 @@ static const char * const gcc_pxo_pll3[] = {
>  	"pll3",
>  };
>  
> -static const struct parent_map gcc_pxo_pll8_pll0[] = {
> +static const struct parent_map gcc_pxo_pll8_pll0_map[] = {
>  	{ P_PXO, 0 },
>  	{ P_PLL8, 3 },
>  	{ P_PLL0, 2 }
>  };
>  
> -static const char * const gcc_pxo_pll8_pll0_map[] = {
> +static const char * const gcc_pxo_pll8_pll0[] = {
>  	"pxo",
>  	"pll8_vote",
>  	"pll0_vote",
> @@ -1993,7 +1993,7 @@ static struct clk_rcg usb30_master_clk_src = {
>  	},
>  	.s = {
>  		.src_sel_shift = 0,
> -		.parent_map = gcc_pxo_pll8_pll0,
> +		.parent_map = gcc_pxo_pll8_pll0_map,
>  	},
>  	.freq_tbl = clk_tbl_usb30_master,
>  	.clkr = {
> @@ -2001,7 +2001,7 @@ static struct clk_rcg usb30_master_clk_src = {
>  		.enable_mask = BIT(11),
>  		.hw.init = &(struct clk_init_data){
>  			.name = "usb30_master_ref_src",
> -			.parent_names = gcc_pxo_pll8_pll0_map,
> +			.parent_names = gcc_pxo_pll8_pll0,
>  			.num_parents = 3,
>  			.ops = &clk_rcg_ops,
>  			.flags = CLK_SET_RATE_GATE,
> @@ -2063,7 +2063,7 @@ static struct clk_rcg usb30_utmi_clk = {
>  	},
>  	.s = {
>  		.src_sel_shift = 0,
> -		.parent_map = gcc_pxo_pll8_pll0,
> +		.parent_map = gcc_pxo_pll8_pll0_map,
>  	},
>  	.freq_tbl = clk_tbl_usb30_utmi,
>  	.clkr = {
> @@ -2071,7 +2071,7 @@ static struct clk_rcg usb30_utmi_clk = {
>  		.enable_mask = BIT(11),
>  		.hw.init = &(struct clk_init_data){
>  			.name = "usb30_utmi_clk",
> -			.parent_names = gcc_pxo_pll8_pll0_map,
> +			.parent_names = gcc_pxo_pll8_pll0,
>  			.num_parents = 3,
>  			.ops = &clk_rcg_ops,
>  			.flags = CLK_SET_RATE_GATE,
> @@ -2133,7 +2133,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
>  	},
>  	.s = {
>  		.src_sel_shift = 0,
> -		.parent_map = gcc_pxo_pll8_pll0,
> +		.parent_map = gcc_pxo_pll8_pll0_map,
>  	},
>  	.freq_tbl = clk_tbl_usb,
>  	.clkr = {
> @@ -2141,7 +2141,7 @@ static struct clk_rcg usb_hs1_xcvr_clk_src = {
>  		.enable_mask = BIT(11),
>  		.hw.init = &(struct clk_init_data){
>  			.name = "usb_hs1_xcvr_src",
> -			.parent_names = gcc_pxo_pll8_pll0_map,
> +			.parent_names = gcc_pxo_pll8_pll0,
>  			.num_parents = 3,
>  			.ops = &clk_rcg_ops,
>  			.flags = CLK_SET_RATE_GATE,
> @@ -2197,7 +2197,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
>  	},
>  	.s = {
>  		.src_sel_shift = 0,
> -		.parent_map = gcc_pxo_pll8_pll0,
> +		.parent_map = gcc_pxo_pll8_pll0_map,
>  	},
>  	.freq_tbl = clk_tbl_usb,
>  	.clkr = {
> @@ -2205,7 +2205,7 @@ static struct clk_rcg usb_fs1_xcvr_clk_src = {
>  		.enable_mask = BIT(11),
>  		.hw.init = &(struct clk_init_data){
>  			.name = "usb_fs1_xcvr_src",
> -			.parent_names = gcc_pxo_pll8_pll0_map,
> +			.parent_names = gcc_pxo_pll8_pll0,
>  			.num_parents = 3,
>  			.ops = &clk_rcg_ops,
>  			.flags = CLK_SET_RATE_GATE,
> -- 
> 2.33.1
> 

Re: [PATCH v3 01/15] dt-bindings: clock: split qcom,gcc.yaml to common and specific schema

[Ansuel Smith]

On Mon, Jan 31, 2022 at 05:11:44PM -0600, Bjorn Andersson wrote:
> On Fri 21 Jan 15:03 CST 2022, Ansuel Smith wrote:
> 
> > Split qcom,gcc.yaml to common and specific schema to use it as a
> > template for schema that needs to use the gcc bindings and require
> > to add additional bindings.
> > 
> 
> Nice!
> 
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> >  .../bindings/clock/qcom,gcc-common.yaml       | 42 +++++++++++++++++++
> >  .../devicetree/bindings/clock/qcom,gcc.yaml   | 25 ++---------
> >  2 files changed, 46 insertions(+), 21 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
> > new file mode 100644
> > index 000000000000..ea1dd94d8bf1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-common.yaml
> 
> It seems reasonable to expect that qcom,gcc.yaml should be split out in
> a number of trivial qcom,gcc-platform.yaml files to define input clock
> etc. So how about using qcom,gcc.yaml for the common properties and for
> now rename the existing file to something like qcom,gcc-others.yaml
> ?
>

Ok, just to make sure.
gcc-common.yaml -> gcc.yaml (the template)
gcc.yaml -> gcc-others.yaml (the generic gcc schema)

Correct?

> > @@ -0,0 +1,42 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/clock/qcom,gcc-common.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Global Clock & Reset Controller Binding Common Bindings
> > +
> > +maintainers:
> > +  - Stephen Boyd <sboyd@kernel.org>
> > +  - Taniya Das <tdas@codeaurora.org>
> > +
> > +description: |
> 
> No need to preserve the formatting here, so the pipe can go.
> 
> Regards,
> Bjorn
> 
> > +  Common bindings for Qualcomm global clock control module which supports
> > +  the clocks, resets and power domains.
> > +
> > +properties:
> > +  '#clock-cells':
> > +    const: 1
> > +
> > +  '#reset-cells':
> > +    const: 1
> > +
> > +  '#power-domain-cells':
> > +    const: 1
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  protected-clocks:
> > +    description:
> > +      Protected clock specifier list as per common clock binding.
> > +
> > +required:
> > +  - reg
> > +  - '#clock-cells'
> > +  - '#reset-cells'
> > +  - '#power-domain-cells'
> > +
> > +additionalProperties: true
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> > index f66d703bd913..73e3ff4979c6 100644
> > --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> > +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> > @@ -34,6 +34,9 @@ description: |
> >    - dt-bindings/reset/qcom,gcc-mdm9615.h
> >    - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
> >  
> > +allOf:
> > +  - $ref: "qcom,gcc-common.yaml#"
> > +
> >  properties:
> >    compatible:
> >      enum:
> > @@ -55,30 +58,10 @@ properties:
> >        - qcom,gcc-sdm630
> >        - qcom,gcc-sdm660
> >  
> > -  '#clock-cells':
> > -    const: 1
> > -
> > -  '#reset-cells':
> > -    const: 1
> > -
> > -  '#power-domain-cells':
> > -    const: 1
> > -
> > -  reg:
> > -    maxItems: 1
> > -
> > -  protected-clocks:
> > -    description:
> > -      Protected clock specifier list as per common clock binding.
> > -
> >  required:
> >    - compatible
> > -  - reg
> > -  - '#clock-cells'
> > -  - '#reset-cells'
> > -  - '#power-domain-cells'
> >  
> > -additionalProperties: false
> > +unevaluatedProperties: false
> >  
> >  examples:
> >    # Example for GCC for MSM8960:
> > -- 
> > 2.33.1
> > 

-- 
	Ansuel

Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Ansuel Smith]

On Tue, Jan 25, 2022 at 02:18:24PM -0800, Stephen Boyd wrote:
> Quoting Ansuel Smith (2022-01-25 13:03:52)
> > On Tue, Jan 25, 2022 at 12:45:53PM -0800, Stephen Boyd wrote:
> > > Quoting Ansuel Smith (2022-01-21 13:03:35)
> > > > Add additional freq supported for the sdc table.
> > > > 
> > > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > > ---
> > > >  drivers/clk/qcom/gcc-ipq806x.c | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > > 
> > > > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> > > > index 77bc3d94f580..dbd61e4844b0 100644
> > > > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > > > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > > > @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
> > > >         {  20210000, P_PLL8,  1, 1,  19 },
> > > >         {  24000000, P_PLL8,  4, 1,   4 },
> > > >         {  48000000, P_PLL8,  4, 1,   2 },
> > > > +       {  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
> > > 
> > > Why the comment and fake rate? Can it be 51200000 instead and drop the
> > > comment?
> > 
> > I will add the related reason in the commit.
> > 
> > We cannot achieve exact 52Mhz(jitter free) clock using PLL8.
> > As per the MND calculator the closest possible jitter free clock
> > using PLL8 is 51.2Mhz. This patch adds the values, which will provide
> > jitter free 51.2Mhz when the requested frequency is 52mhz.
> 
> Sounds like this clk should use the round down clk_ops instead of the
> round up ones. Then the actual frequency can be in the table.

Some hint on how to do that? This use the rcg generic ops that doesn't
use any round. Should I crate some special ops in the rcg driver to
implement the round ops?

-- 
	Ansuel

Re: [PATCH v3 10/15] drivers: clk: qcom: gcc-ipq806x: add additional freq for sdc table

[Stephen Boyd]

Quoting Ansuel Smith (2022-02-01 14:01:40)
> On Tue, Jan 25, 2022 at 02:18:24PM -0800, Stephen Boyd wrote:
> > Quoting Ansuel Smith (2022-01-25 13:03:52)
> > > On Tue, Jan 25, 2022 at 12:45:53PM -0800, Stephen Boyd wrote:
> > > > Quoting Ansuel Smith (2022-01-21 13:03:35)
> > > > > Add additional freq supported for the sdc table.
> > > > > 
> > > > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > > > ---
> > > > >  drivers/clk/qcom/gcc-ipq806x.c | 1 +
> > > > >  1 file changed, 1 insertion(+)
> > > > > 
> > > > > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
> > > > > index 77bc3d94f580..dbd61e4844b0 100644
> > > > > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > > > > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > > > > @@ -1292,6 +1292,7 @@ static const struct freq_tbl clk_tbl_sdc[] = {
> > > > >         {  20210000, P_PLL8,  1, 1,  19 },
> > > > >         {  24000000, P_PLL8,  4, 1,   4 },
> > > > >         {  48000000, P_PLL8,  4, 1,   2 },
> > > > > +       {  52000000, P_PLL8,  1, 2,  15 }, /* 51.2 Mhz */
> > > > 
> > > > Why the comment and fake rate? Can it be 51200000 instead and drop the
> > > > comment?
> > > 
> > > I will add the related reason in the commit.
> > > 
> > > We cannot achieve exact 52Mhz(jitter free) clock using PLL8.
> > > As per the MND calculator the closest possible jitter free clock
> > > using PLL8 is 51.2Mhz. This patch adds the values, which will provide
> > > jitter free 51.2Mhz when the requested frequency is 52mhz.
> > 
> > Sounds like this clk should use the round down clk_ops instead of the
> > round up ones. Then the actual frequency can be in the table.
> 
> Some hint on how to do that? This use the rcg generic ops that doesn't
> use any round. Should I crate some special ops in the rcg driver to
> implement the round ops?
> 

Use the clk_rcg2_floor_ops, or if this isn't an rcg2 clk, then make a
duplicate clk_rcg_floor_ops that does the same thing.