* [PATCH 0/2] Add QCOM TCSR driver
@ 2022-01-22 0:16 Ansuel Smith
2022-01-22 0:16 ` [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings Ansuel Smith
2022-01-22 0:16 ` [PATCH 2/2] drivers: soc: qcom: add TCSR driver Ansuel Smith
0 siblings, 2 replies; 7+ messages in thread
From: Ansuel Smith @ 2022-01-22 0:16 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring, Ansuel Smith,
linux-arm-msm, devicetree, linux-kernel
This is another try of the long gone TCSR driver needed for ipq8064 and
now also ipq4019. The first (and unique) proposal for this is back in
the 2015. After that only part of this got merged, to be specific a
variant of this got merged to support gsbi driver on ipq8064.
All the "configuration" part was never merged and without this ipq8064
SoC and ipq4019 SoC require custom patches to be configured correctly.
The driver itself is really simple. A syscon driver that configure the
system based on the passed bindings. All this stuff can't be moved and
handled by another driver (for example dwc3) as it's global and has to
be set only one (we have 2 dwc3 port for example)
This is necessary for some devices (especially ipq4019 based) that
require some special configuration for the internal WiFi chip memory
configuration.
Ansuel Smith (2):
dt-bindings: soc: qcom: add qcom,tcsr bindings
drivers: soc: qcom: add TCSR driver
.../bindings/soc/qcom/qcom,tcsr-ipq4019.yaml | 93 ++++++++
.../bindings/soc/qcom/qcom,tcsr-ipq8064.yaml | 47 +++++
drivers/soc/qcom/Kconfig | 8 +
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_tcsr.c | 198 ++++++++++++++++++
5 files changed, 347 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
create mode 100644 drivers/soc/qcom/qcom_tcsr.c
--
2.33.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings
2022-01-22 0:16 [PATCH 0/2] Add QCOM TCSR driver Ansuel Smith
@ 2022-01-22 0:16 ` Ansuel Smith
2022-01-31 23:41 ` Bjorn Andersson
2022-02-09 3:01 ` Rob Herring
2022-01-22 0:16 ` [PATCH 2/2] drivers: soc: qcom: add TCSR driver Ansuel Smith
1 sibling, 2 replies; 7+ messages in thread
From: Ansuel Smith @ 2022-01-22 0:16 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring, Ansuel Smith,
linux-arm-msm, devicetree, linux-kernel
Add qcom,tcsr-ipq8064 and qcom,tcsr-ipq4019 Documentation for the
tcsr present in ipq8064 and ipa4019 required to configure and
set various peripherals present in the SoC.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
.../bindings/soc/qcom/qcom,tcsr-ipq4019.yaml | 93 +++++++++++++++++++
.../bindings/soc/qcom/qcom,tcsr-ipq8064.yaml | 47 ++++++++++
2 files changed, 140 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
new file mode 100644
index 000000000000..3a82ccbb6588
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq4019.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Top Control and Status Registers binding for IPQ4019
+
+maintainers:
+ - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+ This binding describes the Qualcomm Top Control and Status Registers, used
+ for accessing configuration and mux settings for a variety of peripherals
+ for ipq4019.
+
+properties:
+ compatible:
+ items:
+ - const: qcom,tcsr-ipq4019
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ qcom,usb-hsphy-mode-select:
+ description: Select usb hsphy mode for ipq4019
+ enum:
+ - 'host'
+ - 'device'
+
+ qcom,ess-interface-select:
+ description: Select ess interface mode for ipq4019
+ enum:
+ - 'psgmii'
+ - 'rgmii5'
+ - 'rmii0'
+ - 'rmii1'
+ - 'rmii0_rmii1'
+ - 'rgmii4'
+
+ qcom,wifi-glb-cfg-enable-axid:
+ description: Enable AXI master bus Axid translating
+ to confirm all txn submitted by order for ipq4019
+ type: boolean
+
+ qcom,wifi-glb-cfg-socslv-mode:
+ description: Select wifi socslv mode for ipq4019
+ snoc use SNOC socslv_wxi_bvalid.
+ local use locally generate socslv_wxi_bvalid for performance.
+ enum:
+ - 'snoc'
+ - 'local'
+
+ qcom,wifi_noc_memtype_m0_m2:
+ description: Configure special wifi memory type needed for
+ some IPQ40xx devicesfor ipq4019
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ tcsr@194b000 {
+ compatible = "qcom,tcsr-ipq4019", "syscon";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = "host";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr-ipq4019", "syscon";
+ reg = <0x1949000 0x100>;
+ qcom,wifi-glb-cfg-enable-axid;
+ qcom,wifi-glb-cfg-socslv-mode = "local";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr-ipq4019", "syscon";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = "psgmii";
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr-ipq4019", "syscon";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
new file mode 100644
index 000000000000..4ccc0bfccec5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq8064.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Top Control and Status Registers binding for IPQ8064
+
+maintainers:
+ - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+ This binding describes the Qualcomm Top Control and Status Registers, used
+ for accessing configuration and mux settings for a variety of peripherals
+ for ipq8064.
+
+properties:
+ compatible:
+ items:
+ - const: qcom,tcsr-ipq8064
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ qcom,usb-ctrl-select:
+ description: Select usb3 ctrl type for ipq8064
+ enum:
+ - 'p0'
+ - 'p1'
+ - 'dual'
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ qcom,usb-ctrl-select = "dual";
+ };
+
+...
--
2.33.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] drivers: soc: qcom: add TCSR driver
2022-01-22 0:16 [PATCH 0/2] Add QCOM TCSR driver Ansuel Smith
2022-01-22 0:16 ` [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings Ansuel Smith
@ 2022-01-22 0:16 ` Ansuel Smith
1 sibling, 0 replies; 7+ messages in thread
From: Ansuel Smith @ 2022-01-22 0:16 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Rob Herring, Ansuel Smith,
linux-arm-msm, devicetree, linux-kernel
Add QCOM Top Control and Status Registers driver required to control and
configure various peripherals for ipq8064 and ipq4019. This is required
to configure usb3 mode, gsbi configuration for ipq8064 and various
devices (WiFi, USB mode, WiFi memtype, ESS interface mode) for ipq4019.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/soc/qcom/Kconfig | 8 ++
drivers/soc/qcom/Makefile | 1 +
drivers/soc/qcom/qcom_tcsr.c | 198 +++++++++++++++++++++++++++++++++++
3 files changed, 207 insertions(+)
create mode 100644 drivers/soc/qcom/qcom_tcsr.c
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e718b8735444..20dd341ae369 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -209,6 +209,14 @@ config QCOM_STATS
various SoC level low power modes statistics and export to debugfs
interface.
+config QCOM_TCSR
+ tristate "QCOM Top Control and Status Registers"
+ depends on ARCH_QCOM || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ Say y here to enable TCSR support. The TCSR provides control
+ functions for various peripherals (USB, WiFi, ESS).
+
config QCOM_WCNSS_CTRL
tristate "Qualcomm WCNSS control driver"
depends on ARCH_QCOM || COMPILE_TEST
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 70d5de69fd7b..b17dd46ed1fa 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
obj-$(CONFIG_QCOM_KRYO_L2_ACCESSORS) += kryo-l2-accessors.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
diff --git a/drivers/soc/qcom/qcom_tcsr.c b/drivers/soc/qcom/qcom_tcsr.c
new file mode 100644
index 000000000000..dc80768d57c2
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define TCSR_USB_PORT_SEL_REG 0xb0
+#define TCSR_USB_PORT_SEL_MASK GENMASK(1, 0)
+
+#define TCSR_USB_SELECT_USB3_P0 FIELD_PREP(TCSR_USB_PORT_SEL_MASK, 0x1)
+#define TCSR_USB_SELECT_USB3_P1 FIELD_PREP(TCSR_USB_PORT_SEL_MASK, 0x2)
+#define TCSR_USB_SELECT_USB3_DUAL FIELD_PREP(TCSR_USB_PORT_SEL_MASK, 0x3)
+
+/* IPQ40xx HS PHY Mode Select */
+#define TCSR_USB_HSPHY_CONFIG_REG 0xc
+#define TCSR_USB_HSPHY_MODE_MASK BIT(21)
+#define TCSR_USB_HSPHY_MODE_HOST_MODE FIELD_PREP(TCSR_USB_HSPHY_MODE_MASK, 0x0)
+#define TCSR_USB_HSPHY_MODE_DEVICE_MODE FIELD_PREP(TCSR_USB_HSPHY_MODE_MASK, 0x1)
+
+/* IPQ40xx ess interface mode select */
+#define TCSR_ESS_INTERFACE_SEL_REG 0x0
+#define TCSR_ESS_INTERFACE_SEL_MASK GENMASK(3, 0)
+#define TCSR_ESS_PSGMII FIELD_PREP(TCSR_ESS_INTERFACE_SEL_MASK, 0x0)
+#define TCSR_ESS_PSGMII_RGMII5 FIELD_PREP(TCSR_ESS_INTERFACE_SEL_MASK, 0x1)
+#define TCSR_ESS_PSGMII_RMII0 FIELD_PREP(TCSR_ESS_INTERFACE_SEL_MASK, 0x2)
+#define TCSR_ESS_PSGMII_RMII1 FIELD_PREP(TCSR_ESS_INTERFACE_SEL_MASK, 0x4)
+#define TCSR_ESS_PSGMII_RMII0_RMII1 FIELD_PREP(TCSR_ESS_INTERFACE_SEL_MASK, 0x6)
+#define TCSR_ESS_PSGMII_RGMII4 FIELD_PREP(TCSR_ESS_INTERFACE_SEL_MASK, 0x9)
+
+/* IPQ40xx WiFi Global Config */
+#define TCSR_WIFI0_GLB_CFG_OFFSET_REG 0x0
+#define TCSR_WIFI1_GLB_CFG_OFFSET_REG 0x4
+/* Enable AXI master bus Axid translating to confirm all txn submitted by order */
+#define TCSR_WIFI_GLB_CFG_AXID_EN BIT(30)
+/* 1: use locally generate socslv_wxi_bvalid for performance.
+ * 0: use SNOC socslv_wxi_bvalid.
+ */
+#define TCSR_WIFI_GLB_CFG_SOCSLV_WXI_BVALID BIT(24)
+#define TCSR_WIFI_GLB_CFG_SOCSLV_SNOC FIELD_PREP(TCSR_WIFI_GLB_CFG_SOCSLV_WXI_BVALID, 0x0)
+#define TCSR_WIFI_GLB_CFG_SOCSLV_LOCAL FIELD_PREP(TCSR_WIFI_GLB_CFG_SOCSLV_WXI_BVALID, 0x1)
+
+/* Configure special wifi memory type needed for some IPQ40xx devices */
+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2_REG 0x4
+#define TCSR_WIFI_NOC_MEMTYPE_MASK GENMASK(26, 24)
+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 FIELD_PREP(TCSR_WIFI_NOC_MEMTYPE_MASK, 0x2)
+
+static int qcom_tcsr_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node;
+ struct regmap *tcsr;
+ int ret, val;
+
+ node = dev->of_node;
+ tcsr = syscon_node_to_regmap(node);
+ if (IS_ERR(tcsr))
+ return PTR_ERR(tcsr);
+
+ if (of_find_property(node, "qcom,usb-ctrl-select", NULL) &&
+ of_device_is_compatible(node, "qcom,tcsr-ipq8064")) {
+ if (of_property_match_string(node, "qcom,usb-ctrl-select",
+ "p0")) {
+ val = TCSR_USB_SELECT_USB3_P0;
+ } else if (of_property_match_string(node, "qcom,usb-ctrl-select",
+ "p1")) {
+ val = TCSR_USB_SELECT_USB3_P1;
+ } else if (of_property_match_string(node, "qcom,usb-ctrl-select",
+ "dual")) {
+ val = TCSR_USB_SELECT_USB3_DUAL;
+ } else {
+ dev_err(dev, "invalid value for qcom,usb-ctrl-select");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(tcsr, TCSR_USB_PORT_SEL_REG,
+ TCSR_USB_PORT_SEL_MASK, val);
+ if (ret)
+ return ret;
+ }
+
+ if (of_find_property(node, "qcom,usb-hsphy-mode-select", NULL) &&
+ of_device_is_compatible(node, "qcom,tcsr-ipq4019")) {
+ if (of_property_match_string(node, "qcom,usb-hsphy-mode-select",
+ "host")) {
+ val = TCSR_USB_HSPHY_MODE_HOST_MODE;
+ } else if (of_property_match_string(node, "qcom,usb-hsphy-mode-select",
+ "device")) {
+ val = TCSR_USB_HSPHY_MODE_DEVICE_MODE;
+ } else {
+ dev_err(dev, "invalid value for qcom,usb-hsphy-mode-select");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(tcsr, TCSR_USB_HSPHY_CONFIG_REG,
+ TCSR_USB_HSPHY_MODE_MASK, val);
+ if (ret)
+ return ret;
+ }
+
+ if (of_find_property(node, "qcom,ess-interface-select", NULL) &&
+ of_device_is_compatible(node, "qcom,tcsr-ipq4019")) {
+ if (of_property_match_string(node, "qcom,ess-interface-select",
+ "psgmii")) {
+ val = TCSR_ESS_PSGMII;
+ } else if (of_property_match_string(node, "qcom,ess-interface-select",
+ "rgmii5")) {
+ val = TCSR_ESS_PSGMII_RGMII5;
+ } else if (of_property_match_string(node, "qcom,ess-interface-select",
+ "rmii0")) {
+ val = TCSR_ESS_PSGMII_RMII0;
+ } else if (of_property_match_string(node, "qcom,ess-interface-select",
+ "rmii1")) {
+ val = TCSR_ESS_PSGMII_RMII1;
+ } else if (of_property_match_string(node, "qcom,ess-interface-select",
+ "rmii0_rmii1")) {
+ val = TCSR_ESS_PSGMII_RMII0_RMII1;
+ } else if (of_property_match_string(node, "qcom,ess-interface-select",
+ "rgmii4")) {
+ val = TCSR_ESS_PSGMII_RGMII4;
+ } else {
+ dev_err(dev, "invalid value for qcom,ess-interface-select");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(tcsr, TCSR_ESS_INTERFACE_SEL_REG,
+ TCSR_ESS_INTERFACE_SEL_MASK, val);
+ if (ret)
+ return ret;
+ }
+
+ if (of_find_property(node, "qcom,wifi-glb-cfg-enable-axid", NULL) &&
+ of_device_is_compatible(node, "qcom,tcsr-ipq4019")) {
+ ret = regmap_set_bits(tcsr, TCSR_WIFI0_GLB_CFG_OFFSET_REG,
+ TCSR_WIFI_GLB_CFG_AXID_EN);
+ ret = regmap_set_bits(tcsr, TCSR_WIFI1_GLB_CFG_OFFSET_REG,
+ TCSR_WIFI_GLB_CFG_AXID_EN);
+ if (ret)
+ return ret;
+ }
+
+ if (of_find_property(node, "qcom,wifi-glb-cfg-socslv-mode", NULL) &&
+ of_device_is_compatible(node, "qcom,tcsr-ipq4019")) {
+ if (of_property_match_string(node, "qcom,wifi-glb-cfg-socslv-mode",
+ "snoc")) {
+ val = TCSR_WIFI_GLB_CFG_SOCSLV_SNOC;
+ } else if (of_property_match_string(node, "qcom,wifi-glb-cfg-socslv-mode",
+ "local")) {
+ val = TCSR_WIFI_GLB_CFG_SOCSLV_SNOC;
+ } else {
+ dev_err(dev, "invalid value for qcom,wifi-glb-cfg-socslv-mode");
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(tcsr, TCSR_WIFI0_GLB_CFG_OFFSET_REG,
+ TCSR_WIFI_GLB_CFG_SOCSLV_WXI_BVALID, val);
+ ret = regmap_update_bits(tcsr, TCSR_WIFI1_GLB_CFG_OFFSET_REG,
+ TCSR_WIFI_GLB_CFG_SOCSLV_WXI_BVALID, val);
+ }
+
+ if (of_find_property(node, "qcom,wifi_noc_memtype_m0_m2", NULL) &&
+ of_device_is_compatible(node, "qcom,tcsr-ipq4019")) {
+ ret = regmap_update_bits(tcsr, TCSR_PNOC_SNOC_MEMTYPE_M0_M2_REG,
+ TCSR_WIFI_NOC_MEMTYPE_MASK,
+ TCSR_WIFI_NOC_MEMTYPE_M0_M2);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id qcom_tcsr_dt_match[] = {
+ { .compatible = "qcom,tcsr-ipq8064", },
+ { .compatible = "qcom,tcsr-ipq4019", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_tcsr_dt_match);
+
+static struct platform_driver qcom_tcsr_driver = {
+ .probe = qcom_tcsr_probe,
+ .driver = {
+ .name = "qcom-tcsr",
+ .of_match_table = qcom_tcsr_dt_match,
+ },
+};
+
+module_platform_driver(qcom_tcsr_driver);
+
+MODULE_AUTHOR("Ansuel Smith <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
--
2.33.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings
2022-01-22 0:16 ` [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings Ansuel Smith
@ 2022-01-31 23:41 ` Bjorn Andersson
2022-02-01 21:49 ` Ansuel Smith
2022-02-09 3:01 ` Rob Herring
1 sibling, 1 reply; 7+ messages in thread
From: Bjorn Andersson @ 2022-01-31 23:41 UTC (permalink / raw)
To: Ansuel Smith
Cc: Andy Gross, Rob Herring, linux-arm-msm, devicetree, linux-kernel
On Fri 21 Jan 18:16 CST 2022, Ansuel Smith wrote:
> Add qcom,tcsr-ipq8064 and qcom,tcsr-ipq4019 Documentation for the
> tcsr present in ipq8064 and ipa4019 required to configure and
> set various peripherals present in the SoC.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> .../bindings/soc/qcom/qcom,tcsr-ipq4019.yaml | 93 +++++++++++++++++++
> .../bindings/soc/qcom/qcom,tcsr-ipq8064.yaml | 47 ++++++++++
> 2 files changed, 140 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> new file mode 100644
> index 000000000000..3a82ccbb6588
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq4019.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Top Control and Status Registers binding for IPQ4019
> +
> +maintainers:
> + - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description: |
> + This binding describes the Qualcomm Top Control and Status Registers, used
> + for accessing configuration and mux settings for a variety of peripherals
> + for ipq4019.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,tcsr-ipq4019
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + qcom,usb-hsphy-mode-select:
> + description: Select usb hsphy mode for ipq4019
Why isn't this driven by the USB node, where I presume you otherwise
need to duplicate this decision?
Is this platform not capable of OTG?
> + enum:
> + - 'host'
> + - 'device'
> +
> + qcom,ess-interface-select:
> + description: Select ess interface mode for ipq4019
> + enum:
> + - 'psgmii'
> + - 'rgmii5'
> + - 'rmii0'
> + - 'rmii1'
> + - 'rmii0_rmii1'
> + - 'rgmii4'
> +
> + qcom,wifi-glb-cfg-enable-axid:
> + description: Enable AXI master bus Axid translating
> + to confirm all txn submitted by order for ipq4019
> + type: boolean
> +
> + qcom,wifi-glb-cfg-socslv-mode:
> + description: Select wifi socslv mode for ipq4019
> + snoc use SNOC socslv_wxi_bvalid.
> + local use locally generate socslv_wxi_bvalid for performance.
> + enum:
> + - 'snoc'
> + - 'local'
> +
> + qcom,wifi_noc_memtype_m0_m2:
> + description: Configure special wifi memory type needed for
> + some IPQ40xx devicesfor ipq4019
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + tcsr@194b000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
There's a single "tcsr" register block at 0x1937000 of size 0x21000.
The binding should describe that entire block, not convenient pieces of
it.
> + reg = <0x194b000 0x100>;
> + qcom,usb-hsphy-mode-select = "host";
> + };
> +
> + tcsr@1949000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x1949000 0x100>;
> + qcom,wifi-glb-cfg-enable-axid;
> + qcom,wifi-glb-cfg-socslv-mode = "local";
> + };
> +
> + ess_tcsr@1953000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x1953000 0x1000>;
> + qcom,ess-interface-select = "psgmii";
> + };
> +
> + tcsr@1957000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x1957000 0x100>;
> + qcom,wifi_noc_memtype_m0_m2;
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> new file mode 100644
> index 000000000000..4ccc0bfccec5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq8064.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Top Control and Status Registers binding for IPQ8064
> +
> +maintainers:
> + - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description: |
> + This binding describes the Qualcomm Top Control and Status Registers, used
> + for accessing configuration and mux settings for a variety of peripherals
> + for ipq8064.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,tcsr-ipq8064
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + qcom,usb-ctrl-select:
> + description: Select usb3 ctrl type for ipq8064
> + enum:
> + - 'p0'
> + - 'p1'
> + - 'dual'
Again, it seems reasonable to get this form the dwc3 node, rather than
duplicating the configuration.
Regards,
Bjorn
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + tcsr: syscon@1a400000 {
> + compatible = "qcom,tcsr-ipq8064", "syscon";
> + reg = <0x1a400000 0x100>;
> + qcom,usb-ctrl-select = "dual";
> + };
> +
> +...
> --
> 2.33.1
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings
2022-01-31 23:41 ` Bjorn Andersson
@ 2022-02-01 21:49 ` Ansuel Smith
2022-02-09 23:17 ` Bjorn Andersson
0 siblings, 1 reply; 7+ messages in thread
From: Ansuel Smith @ 2022-02-01 21:49 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Andy Gross, Rob Herring, linux-arm-msm, devicetree, linux-kernel
On Mon, Jan 31, 2022 at 05:41:30PM -0600, Bjorn Andersson wrote:
> On Fri 21 Jan 18:16 CST 2022, Ansuel Smith wrote:
>
> > Add qcom,tcsr-ipq8064 and qcom,tcsr-ipq4019 Documentation for the
> > tcsr present in ipq8064 and ipa4019 required to configure and
> > set various peripherals present in the SoC.
> >
> > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > ---
> > .../bindings/soc/qcom/qcom,tcsr-ipq4019.yaml | 93 +++++++++++++++++++
> > .../bindings/soc/qcom/qcom,tcsr-ipq8064.yaml | 47 ++++++++++
> > 2 files changed, 140 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> > new file mode 100644
> > index 000000000000..3a82ccbb6588
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> > @@ -0,0 +1,93 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq4019.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm Top Control and Status Registers binding for IPQ4019
> > +
> > +maintainers:
> > + - Ansuel Smith <ansuelsmth@gmail.com>
> > +
> > +description: |
> > + This binding describes the Qualcomm Top Control and Status Registers, used
> > + for accessing configuration and mux settings for a variety of peripherals
> > + for ipq4019.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - const: qcom,tcsr-ipq4019
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + qcom,usb-hsphy-mode-select:
> > + description: Select usb hsphy mode for ipq4019
>
> Why isn't this driven by the USB node, where I presume you otherwise
> need to duplicate this decision?
>
From what I understand this is global, setting this will apply on any
usb present.
> Is this platform not capable of OTG?
>
I assume it's capable by selecting the correct mode using tcsr.
> > + enum:
> > + - 'host'
> > + - 'device'
> > +
> > + qcom,ess-interface-select:
> > + description: Select ess interface mode for ipq4019
> > + enum:
> > + - 'psgmii'
> > + - 'rgmii5'
> > + - 'rmii0'
> > + - 'rmii1'
> > + - 'rmii0_rmii1'
> > + - 'rgmii4'
> > +
> > + qcom,wifi-glb-cfg-enable-axid:
> > + description: Enable AXI master bus Axid translating
> > + to confirm all txn submitted by order for ipq4019
> > + type: boolean
> > +
> > + qcom,wifi-glb-cfg-socslv-mode:
> > + description: Select wifi socslv mode for ipq4019
> > + snoc use SNOC socslv_wxi_bvalid.
> > + local use locally generate socslv_wxi_bvalid for performance.
> > + enum:
> > + - 'snoc'
> > + - 'local'
> > +
> > + qcom,wifi_noc_memtype_m0_m2:
> > + description: Configure special wifi memory type needed for
> > + some IPQ40xx devicesfor ipq4019
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + tcsr@194b000 {
> > + compatible = "qcom,tcsr-ipq4019", "syscon";
>
> There's a single "tcsr" register block at 0x1937000 of size 0x21000.
> The binding should describe that entire block, not convenient pieces of
> it.
>
The current driver implementation works with the offset provided by the
reg. I assume I can just hardcode the offset in the driver and declare a
single tcsr node. Will do this change.
> > + reg = <0x194b000 0x100>;
> > + qcom,usb-hsphy-mode-select = "host";
> > + };
> > +
> > + tcsr@1949000 {
> > + compatible = "qcom,tcsr-ipq4019", "syscon";
> > + reg = <0x1949000 0x100>;
> > + qcom,wifi-glb-cfg-enable-axid;
> > + qcom,wifi-glb-cfg-socslv-mode = "local";
> > + };
> > +
> > + ess_tcsr@1953000 {
> > + compatible = "qcom,tcsr-ipq4019", "syscon";
> > + reg = <0x1953000 0x1000>;
> > + qcom,ess-interface-select = "psgmii";
> > + };
> > +
> > + tcsr@1957000 {
> > + compatible = "qcom,tcsr-ipq4019", "syscon";
> > + reg = <0x1957000 0x100>;
> > + qcom,wifi_noc_memtype_m0_m2;
> > + };
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> > new file mode 100644
> > index 000000000000..4ccc0bfccec5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> > @@ -0,0 +1,47 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq8064.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Qualcomm Top Control and Status Registers binding for IPQ8064
> > +
> > +maintainers:
> > + - Ansuel Smith <ansuelsmth@gmail.com>
> > +
> > +description: |
> > + This binding describes the Qualcomm Top Control and Status Registers, used
> > + for accessing configuration and mux settings for a variety of peripherals
> > + for ipq8064.
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - const: qcom,tcsr-ipq8064
> > + - const: syscon
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + qcom,usb-ctrl-select:
> > + description: Select usb3 ctrl type for ipq8064
> > + enum:
> > + - 'p0'
> > + - 'p1'
> > + - 'dual'
>
> Again, it seems reasonable to get this form the dwc3 node, rather than
> duplicating the configuration.
>
As I said up, it seems to be global, that's the reason I didn't put this
handling in the dwc-qcom driver. (I mean it seems wrong that dwc3 would
set the same value twice). If this is necessary I will add support for
this in dwc-qcom.
> Regards,
> Bjorn
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + tcsr: syscon@1a400000 {
> > + compatible = "qcom,tcsr-ipq8064", "syscon";
> > + reg = <0x1a400000 0x100>;
> > + qcom,usb-ctrl-select = "dual";
> > + };
> > +
> > +...
> > --
> > 2.33.1
> >
--
Ansuel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings
2022-01-22 0:16 ` [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings Ansuel Smith
2022-01-31 23:41 ` Bjorn Andersson
@ 2022-02-09 3:01 ` Rob Herring
1 sibling, 0 replies; 7+ messages in thread
From: Rob Herring @ 2022-02-09 3:01 UTC (permalink / raw)
To: Ansuel Smith
Cc: Andy Gross, Bjorn Andersson, linux-arm-msm, devicetree, linux-kernel
On Sat, Jan 22, 2022 at 01:16:08AM +0100, Ansuel Smith wrote:
> Add qcom,tcsr-ipq8064 and qcom,tcsr-ipq4019 Documentation for the
> tcsr present in ipq8064 and ipa4019 required to configure and
> set various peripherals present in the SoC.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> .../bindings/soc/qcom/qcom,tcsr-ipq4019.yaml | 93 +++++++++++++++++++
> .../bindings/soc/qcom/qcom,tcsr-ipq8064.yaml | 47 ++++++++++
> 2 files changed, 140 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> new file mode 100644
> index 000000000000..3a82ccbb6588
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq4019.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Top Control and Status Registers binding for IPQ4019
> +
> +maintainers:
> + - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description: |
> + This binding describes the Qualcomm Top Control and Status Registers, used
> + for accessing configuration and mux settings for a variety of peripherals
> + for ipq4019.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,tcsr-ipq4019
Normal order is qcom,ipq4019-tcsr
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + qcom,usb-hsphy-mode-select:
> + description: Select usb hsphy mode for ipq4019
> + enum:
> + - 'host'
> + - 'device'
Don't need quotes.
> +
> + qcom,ess-interface-select:
> + description: Select ess interface mode for ipq4019
> + enum:
> + - 'psgmii'
> + - 'rgmii5'
> + - 'rmii0'
> + - 'rmii1'
> + - 'rmii0_rmii1'
> + - 'rgmii4'
> +
> + qcom,wifi-glb-cfg-enable-axid:
> + description: Enable AXI master bus Axid translating
> + to confirm all txn submitted by order for ipq4019
Wrap at ~80 and indent 2 more spaces (than 'description').
> + type: boolean
> +
> + qcom,wifi-glb-cfg-socslv-mode:
> + description: Select wifi socslv mode for ipq4019
> + snoc use SNOC socslv_wxi_bvalid.
> + local use locally generate socslv_wxi_bvalid for performance.
> + enum:
> + - 'snoc'
> + - 'local'
> +
> + qcom,wifi_noc_memtype_m0_m2:
s/_/-/
> + description: Configure special wifi memory type needed for
> + some IPQ40xx devicesfor ipq4019
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + tcsr@194b000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x194b000 0x100>;
> + qcom,usb-hsphy-mode-select = "host";
> + };
> +
> + tcsr@1949000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x1949000 0x100>;
> + qcom,wifi-glb-cfg-enable-axid;
> + qcom,wifi-glb-cfg-socslv-mode = "local";
> + };
> +
> + ess_tcsr@1953000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x1953000 0x1000>;
> + qcom,ess-interface-select = "psgmii";
> + };
> +
> + tcsr@1957000 {
> + compatible = "qcom,tcsr-ipq4019", "syscon";
> + reg = <0x1957000 0x100>;
> + qcom,wifi_noc_memtype_m0_m2;
> + };
> +
> +...
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> new file mode 100644
> index 000000000000..4ccc0bfccec5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> @@ -0,0 +1,47 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq8064.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm Top Control and Status Registers binding for IPQ8064
> +
> +maintainers:
> + - Ansuel Smith <ansuelsmth@gmail.com>
> +
> +description: |
> + This binding describes the Qualcomm Top Control and Status Registers, used
> + for accessing configuration and mux settings for a variety of peripherals
> + for ipq8064.
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,tcsr-ipq8064
qcom,ipq8064-tcsr
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + qcom,usb-ctrl-select:
> + description: Select usb3 ctrl type for ipq8064
> + enum:
> + - 'p0'
> + - 'p1'
> + - 'dual'
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + tcsr: syscon@1a400000 {
> + compatible = "qcom,tcsr-ipq8064", "syscon";
> + reg = <0x1a400000 0x100>;
> + qcom,usb-ctrl-select = "dual";
> + };
> +
> +...
> --
> 2.33.1
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings
2022-02-01 21:49 ` Ansuel Smith
@ 2022-02-09 23:17 ` Bjorn Andersson
0 siblings, 0 replies; 7+ messages in thread
From: Bjorn Andersson @ 2022-02-09 23:17 UTC (permalink / raw)
To: Ansuel Smith
Cc: Andy Gross, Rob Herring, linux-arm-msm, devicetree, linux-kernel
On Tue 01 Feb 13:49 PST 2022, Ansuel Smith wrote:
> On Mon, Jan 31, 2022 at 05:41:30PM -0600, Bjorn Andersson wrote:
> > On Fri 21 Jan 18:16 CST 2022, Ansuel Smith wrote:
> >
> > > Add qcom,tcsr-ipq8064 and qcom,tcsr-ipq4019 Documentation for the
> > > tcsr present in ipq8064 and ipa4019 required to configure and
> > > set various peripherals present in the SoC.
> > >
> > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> > > ---
> > > .../bindings/soc/qcom/qcom,tcsr-ipq4019.yaml | 93 +++++++++++++++++++
> > > .../bindings/soc/qcom/qcom,tcsr-ipq8064.yaml | 47 ++++++++++
> > > 2 files changed, 140 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> > > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq8064.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> > > new file mode 100644
> > > index 000000000000..3a82ccbb6588
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr-ipq4019.yaml
> > > @@ -0,0 +1,93 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: "http://devicetree.org/schemas/soc/qcom/qcom,tcsr-ipq4019.yaml#"
> > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > > +
> > > +title: Qualcomm Top Control and Status Registers binding for IPQ4019
> > > +
> > > +maintainers:
> > > + - Ansuel Smith <ansuelsmth@gmail.com>
> > > +
> > > +description: |
> > > + This binding describes the Qualcomm Top Control and Status Registers, used
> > > + for accessing configuration and mux settings for a variety of peripherals
> > > + for ipq4019.
> > > +
> > > +properties:
> > > + compatible:
> > > + items:
> > > + - const: qcom,tcsr-ipq4019
> > > + - const: syscon
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + qcom,usb-hsphy-mode-select:
> > > + description: Select usb hsphy mode for ipq4019
> >
> > Why isn't this driven by the USB node, where I presume you otherwise
> > need to duplicate this decision?
> >
>
> From what I understand this is global, setting this will apply on any
> usb present.
>
> > Is this platform not capable of OTG?
> >
>
> I assume it's capable by selecting the correct mode using tcsr.
>
I expect that the USB controller will receive extcon (or
usb_role_switch) requests to flip between the modes based on something.
When this happens it sounds like the USB controller would have to
propagate that change to the TCSR bits as well, and if the USB
controller driver is able to flip the bits then this shouldn't be needed
here?
Regards,
Bjorn
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-02-09 23:15 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-22 0:16 [PATCH 0/2] Add QCOM TCSR driver Ansuel Smith
2022-01-22 0:16 ` [PATCH 1/2] dt-bindings: soc: qcom: add qcom,tcsr bindings Ansuel Smith
2022-01-31 23:41 ` Bjorn Andersson
2022-02-01 21:49 ` Ansuel Smith
2022-02-09 23:17 ` Bjorn Andersson
2022-02-09 3:01 ` Rob Herring
2022-01-22 0:16 ` [PATCH 2/2] drivers: soc: qcom: add TCSR driver Ansuel Smith
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).