* [PATCH] arm64: defconfig: Enable modules for arm displays
@ 2022-01-28 10:07 carsten.haitzler
2022-04-21 12:09 ` Carsten Haitzler
0 siblings, 1 reply; 3+ messages in thread
From: carsten.haitzler @ 2022-01-28 10:07 UTC (permalink / raw)
To: linux-arm-kernel
Cc: catalin.marinas, will, shawnguo, bjorn.andersson, geert+renesas,
krzk, biju.das.jz, enric.balletbo, agx, spujar, alexander.stein,
yuzenghui, festevam, linux-kernel
From: Carsten Haitzler <carsten.haitzler@arm.com>
Key devices that support displays on SoCs like the Komeda DRM driver, the
older HDLCD were not enabled by default and should be so displays can work
out of the box on defconfig. Also Candence I2C support should be enabled so
the PHY and thus displays can work too.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 30516dc0b70e..87edd79dac99 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -469,6 +469,7 @@ CONFIG_I2C_TEGRA=y
CONFIG_I2C_UNIPHIER_F=y
CONFIG_I2C_RCAR=y
CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_I2C_CADENCE=m
CONFIG_SPI=y
CONFIG_SPI_ARMADA_3700=y
CONFIG_SPI_BCM2835=m
@@ -678,7 +679,9 @@ CONFIG_VIDEO_OV5645=m
CONFIG_VIDEO_QCOM_CAMSS=m
CONFIG_DRM=m
CONFIG_DRM_I2C_NXP_TDA998X=m
+CONFIG_DRM_HDLCD=m
CONFIG_DRM_MALI_DISPLAY=m
+CONFIG_DRM_KOMEDA=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_EXYNOS=m
CONFIG_DRM_EXYNOS5433_DECON=y
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: defconfig: Enable modules for arm displays
2022-01-28 10:07 [PATCH] arm64: defconfig: Enable modules for arm displays carsten.haitzler
@ 2022-04-21 12:09 ` Carsten Haitzler
2022-04-21 12:18 ` Krzysztof Kozlowski
0 siblings, 1 reply; 3+ messages in thread
From: Carsten Haitzler @ 2022-04-21 12:09 UTC (permalink / raw)
To: linux-arm-kernel
Cc: catalin.marinas, will, shawnguo, bjorn.andersson, geert+renesas,
krzk, biju.das.jz, enric.balletbo, agx, spujar, alexander.stein,
yuzenghui, festevam, linux-kernel
Ping - has anyone looked at this?
On 1/28/22 10:07, carsten.haitzler@foss.arm.com wrote:
> From: Carsten Haitzler <carsten.haitzler@arm.com>
>
> Key devices that support displays on SoCs like the Komeda DRM driver, the
> older HDLCD were not enabled by default and should be so displays can work
> out of the box on defconfig. Also Candence I2C support should be enabled so
> the PHY and thus displays can work too.
>
> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
> ---
> arch/arm64/configs/defconfig | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 30516dc0b70e..87edd79dac99 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -469,6 +469,7 @@ CONFIG_I2C_TEGRA=y
> CONFIG_I2C_UNIPHIER_F=y
> CONFIG_I2C_RCAR=y
> CONFIG_I2C_CROS_EC_TUNNEL=y
> +CONFIG_I2C_CADENCE=m
> CONFIG_SPI=y
> CONFIG_SPI_ARMADA_3700=y
> CONFIG_SPI_BCM2835=m
> @@ -678,7 +679,9 @@ CONFIG_VIDEO_OV5645=m
> CONFIG_VIDEO_QCOM_CAMSS=m
> CONFIG_DRM=m
> CONFIG_DRM_I2C_NXP_TDA998X=m
> +CONFIG_DRM_HDLCD=m
> CONFIG_DRM_MALI_DISPLAY=m
> +CONFIG_DRM_KOMEDA=m
> CONFIG_DRM_NOUVEAU=m
> CONFIG_DRM_EXYNOS=m
> CONFIG_DRM_EXYNOS5433_DECON=y
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm64: defconfig: Enable modules for arm displays
2022-04-21 12:09 ` Carsten Haitzler
@ 2022-04-21 12:18 ` Krzysztof Kozlowski
0 siblings, 0 replies; 3+ messages in thread
From: Krzysztof Kozlowski @ 2022-04-21 12:18 UTC (permalink / raw)
To: Carsten Haitzler, linux-arm-kernel
Cc: catalin.marinas, will, shawnguo, bjorn.andersson, geert+renesas,
biju.das.jz, enric.balletbo, agx, spujar, alexander.stein,
yuzenghui, festevam, linux-kernel
On 21/04/2022 14:09, Carsten Haitzler wrote:
> Ping - has anyone looked at this?
Hi,
defconfig changes are going via SoC platform maintainers, so judging by
title (arm displays) this will be someone from ARM?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-04-21 12:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-28 10:07 [PATCH] arm64: defconfig: Enable modules for arm displays carsten.haitzler
2022-04-21 12:09 ` Carsten Haitzler
2022-04-21 12:18 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).