[PATCH 0/7] add support for GSC in XeHP SDV platform

[PATCH 0/7] add support for GSC in XeHP SDV platform

[Alexander Usyskin]

Add support for GSC in XeHP SDV (Intel(R) dGPU without display).
 
XeHP SDV GSC controller uses the same hardware settings as DG1, but uses
polling instead of interrupts and runs the firmware in slow pace due to
hardware limitations.

This series should be applied over "Add driver for GSC controller"
patch series.

Greg KH, please review and ACK the MEI patches.
We are pushing all through gfx tree as the device belongs there.

Alexander Usyskin (5):
  drm/i915/gsc: add slow_fw flag to the mei auxiliary device
  drm/i915/gsc: add slow_fw flag to the gsc device definition
  drm/i915/gsc: add GSC XeHP SDV platform definition
  mei: gsc: wait for reset thread on stop
  mei: extend timeouts on slow devices.

Tomas Winkler (1):
  mei: gsc: use polling instead of interrupts

Vitaly Lubart (1):
  drm/i915/gsc: skip irq initialization if using polling

 drivers/gpu/drm/i915/gt/intel_gsc.c | 34 +++++++++--
 drivers/misc/mei/bus-fixup.c        |  3 +-
 drivers/misc/mei/client.c           | 14 ++---
 drivers/misc/mei/gsc-me.c           | 44 ++++++++++++---
 drivers/misc/mei/hbm.c              | 12 ++--
 drivers/misc/mei/hw-me.c            | 88 +++++++++++++++++++++++------
 drivers/misc/mei/hw-me.h            | 14 ++++-
 drivers/misc/mei/hw-txe.c           |  2 +-
 drivers/misc/mei/hw.h               |  5 ++
 drivers/misc/mei/init.c             | 21 ++++++-
 drivers/misc/mei/main.c             |  2 +-
 drivers/misc/mei/mei_dev.h          | 16 ++++++
 drivers/misc/mei/pci-me.c           |  2 +-
 include/linux/mei_aux.h             |  1 +
 14 files changed, 208 insertions(+), 50 deletions(-)

-- 
2.32.0

[PATCH 1/7] drm/i915/gsc: skip irq initialization if using polling

[Alexander Usyskin]

From: Vitaly Lubart <vitaly.lubart@intel.com>

If we use polling instead of interrupts,
irq initialization should be skipped.

Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
---
 drivers/gpu/drm/i915/gt/intel_gsc.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_gsc.c b/drivers/gpu/drm/i915/gt/intel_gsc.c
index 152804e7c41a..db01cfda78f1 100644
--- a/drivers/gpu/drm/i915/gt/intel_gsc.c
+++ b/drivers/gpu/drm/i915/gt/intel_gsc.c
@@ -40,6 +40,7 @@ struct intel_gsc_def {
 	const char *name;
 	unsigned long bar;
 	size_t bar_size;
+	bool use_polling;
 };
 
 /* gscfi (graphics system controller firmware interface) resources */
@@ -97,6 +98,10 @@ static void intel_gsc_init_one(struct drm_i915_private *i915,
 		return;
 	}
 
+	/* skip irq initialization */
+	if (def->use_polling)
+		goto add_device;
+
 	intf->irq = irq_alloc_desc(0);
 	if (intf->irq < 0) {
 		drm_err(&i915->drm, "gsc irq error %d\n", intf->irq);
@@ -109,6 +114,7 @@ static void intel_gsc_init_one(struct drm_i915_private *i915,
 		goto fail;
 	}
 
+add_device:
 	adev = kzalloc(sizeof(*adev), GFP_KERNEL);
 	if (!adev)
 		goto fail;
@@ -162,10 +168,8 @@ static void gsc_irq_handler(struct intel_gt *gt, unsigned int intf_id)
 		return;
 	}
 
-	if (gt->gsc.intf[intf_id].irq < 0) {
-		drm_err_ratelimited(&gt->i915->drm, "GSC irq: irq not set");
+	if (gt->gsc.intf[intf_id].irq < 0)
 		return;
-	}
 
 	ret = generic_handle_irq(gt->gsc.intf[intf_id].irq);
 	if (ret)
-- 
2.32.0

[PATCH 2/7] drm/i915/gsc: add slow_fw flag to the mei auxiliary device

[Alexander Usyskin]

Add slow_fw flag to the mei auxiliary device info
to inform the mei driver about slow underlying firmware.
Such firmware will require to use larger operation timeouts.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
 include/linux/mei_aux.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/mei_aux.h b/include/linux/mei_aux.h
index 587f25128848..a29f4064b9c0 100644
--- a/include/linux/mei_aux.h
+++ b/include/linux/mei_aux.h
@@ -11,6 +11,7 @@ struct mei_aux_device {
 	struct auxiliary_device aux_dev;
 	int irq;
 	struct resource bar;
+	bool slow_fw;
 };
 
 #define auxiliary_dev_to_mei_aux_dev(auxiliary_dev) \
-- 
2.32.0

[PATCH 3/7] drm/i915/gsc: add slow_fw flag to the gsc device definition

[Alexander Usyskin]

Add slow_fw flag to the gsc device definition
and pass it to mei auxiliary device.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
---
 drivers/gpu/drm/i915/gt/intel_gsc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/intel_gsc.c b/drivers/gpu/drm/i915/gt/intel_gsc.c
index db01cfda78f1..1cbad9248f7c 100644
--- a/drivers/gpu/drm/i915/gt/intel_gsc.c
+++ b/drivers/gpu/drm/i915/gt/intel_gsc.c
@@ -41,6 +41,7 @@ struct intel_gsc_def {
 	unsigned long bar;
 	size_t bar_size;
 	bool use_polling;
+	bool slow_fw;
 };
 
 /* gscfi (graphics system controller firmware interface) resources */
@@ -125,6 +126,7 @@ static void intel_gsc_init_one(struct drm_i915_private *i915,
 	adev->bar.end = adev->bar.start + def->bar_size - 1;
 	adev->bar.flags = IORESOURCE_MEM;
 	adev->bar.desc = IORES_DESC_NONE;
+	adev->slow_fw = def->slow_fw;
 
 	aux_dev = &adev->aux_dev;
 	aux_dev->name = def->name;
-- 
2.32.0

[PATCH 4/7] drm/i915/gsc: add GSC XeHP SDV platform definition

[Alexander Usyskin]

Define GSC on XeHP SDV (Intel(R) dGPU without display)

XeHP SDV uses the same hardware settings as DG1, but uses polling
instead of interrupts and runs the firmware in slow pace due to
hardware limitations.

Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
---
 drivers/gpu/drm/i915/gt/intel_gsc.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_gsc.c b/drivers/gpu/drm/i915/gt/intel_gsc.c
index 1cbad9248f7c..2d6c871140d8 100644
--- a/drivers/gpu/drm/i915/gt/intel_gsc.c
+++ b/drivers/gpu/drm/i915/gt/intel_gsc.c
@@ -56,6 +56,19 @@ static const struct intel_gsc_def intel_gsc_def_dg1[] = {
 	}
 };
 
+static const struct intel_gsc_def intel_gsc_def_xehpsdv[] = {
+	{
+		/* HECI1 not enabled on the device. */
+	},
+	{
+		.name = "mei-gscfi",
+		.bar = GSC_DG1_HECI2_BASE,
+		.bar_size = GSC_BAR_LENGTH,
+		.use_polling = true,
+		.slow_fw = true,
+	}
+};
+
 static void intel_gsc_release_dev(struct device *dev)
 {
 	struct auxiliary_device *aux_dev = to_auxiliary_dev(dev);
@@ -92,7 +105,14 @@ static void intel_gsc_init_one(struct drm_i915_private *i915,
 	if (intf_id == 0 && !HAS_HECI_PXP(i915))
 		return;
 
-	def = &intel_gsc_def_dg1[intf_id];
+	if (IS_DG1(i915)) {
+		def = &intel_gsc_def_dg1[intf_id];
+	} else if (IS_XEHPSDV(i915)) {
+		def = &intel_gsc_def_xehpsdv[intf_id];
+	} else {
+		drm_warn_once(&i915->drm, "Unknown platform\n");
+		return;
+	}
 
 	if (!def->name) {
 		drm_warn_once(&i915->drm, "HECI%d is not implemented!\n", intf_id + 1);
-- 
2.32.0

[PATCH 5/7] mei: gsc: use polling instead of interrupts

[Alexander Usyskin]

From: Tomas Winkler <tomas.winkler@intel.com>

A work-around for a HW issue in XEHPSDV that manifests itself when SW reads
a gsc register when gsc is sending an interrupt. The work-around is
to disable interrupts and to use polling instead.

Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
 drivers/misc/mei/gsc-me.c | 42 +++++++++++++++++++++++-----
 drivers/misc/mei/hw-me.c  | 58 ++++++++++++++++++++++++++++++++++++---
 drivers/misc/mei/hw-me.h  | 12 ++++++++
 3 files changed, 101 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c
index dac482ddab51..ffe9bf980f92 100644
--- a/drivers/misc/mei/gsc-me.c
+++ b/drivers/misc/mei/gsc-me.c
@@ -13,6 +13,7 @@
 #include <linux/ktime.h>
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
+#include <linux/kthread.h>
 
 #include "mei_dev.h"
 #include "hw-me.h"
@@ -66,13 +67,27 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev,
 
 	dev_set_drvdata(&aux_dev->dev, dev);
 
-	ret = devm_request_threaded_irq(device, hw->irq,
-					mei_me_irq_quick_handler,
-					mei_me_irq_thread_handler,
-					IRQF_ONESHOT, KBUILD_MODNAME, dev);
-	if (ret) {
-		dev_err(device, "irq register failed %d\n", ret);
-		goto err;
+	/* use polling */
+	if (mei_me_hw_use_polling(hw)) {
+		mei_disable_interrupts(dev);
+		init_waitqueue_head(&hw->wait_active);
+		hw->is_active = true; /* start in active mode for initialization */
+		hw->polling_thread = kthread_run(mei_me_polling_thread, dev,
+						 "kmegscirqd/%s", dev_name(device));
+		if (IS_ERR(hw->polling_thread)) {
+			ret = PTR_ERR(hw->polling_thread);
+			dev_err(device, "unable to create kernel thread: %d\n", ret);
+			goto err;
+		}
+	} else {
+		ret = devm_request_threaded_irq(device, hw->irq,
+						mei_me_irq_quick_handler,
+						mei_me_irq_thread_handler,
+						IRQF_ONESHOT, KBUILD_MODNAME, dev);
+		if (ret) {
+			dev_err(device, "irq register failed %d\n", ret);
+			goto err;
+		}
 	}
 
 	pm_runtime_get_noresume(device);
@@ -108,6 +123,7 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev,
 static void mei_gsc_remove(struct auxiliary_device *aux_dev)
 {
 	struct mei_device *dev;
+	struct mei_me_hw *hw;
 
 	dev = dev_get_drvdata(&aux_dev->dev);
 	if (!dev)
@@ -115,6 +131,10 @@ static void mei_gsc_remove(struct auxiliary_device *aux_dev)
 
 	mei_stop(dev);
 
+	hw = to_me_hw(dev);
+	if (mei_me_hw_use_polling(hw))
+		kthread_stop(hw->polling_thread);
+
 	mei_deregister(dev);
 
 	pm_runtime_disable(&aux_dev->dev);
@@ -178,6 +198,9 @@ static int  __maybe_unused mei_gsc_pm_runtime_suspend(struct device *device)
 	if (mei_write_is_idle(dev)) {
 		hw = to_me_hw(dev);
 		hw->pg_state = MEI_PG_ON;
+
+		if (mei_me_hw_use_polling(hw))
+			hw->is_active = false;
 		ret = 0;
 	} else {
 		ret = -EAGAIN;
@@ -202,6 +225,11 @@ static int __maybe_unused mei_gsc_pm_runtime_resume(struct device *device)
 	hw = to_me_hw(dev);
 	hw->pg_state = MEI_PG_OFF;
 
+	if (mei_me_hw_use_polling(hw)) {
+		hw->is_active = true;
+		wake_up(&hw->wait_active);
+	}
+
 	mutex_unlock(&dev->device_lock);
 
 	irq_ret = mei_me_irq_thread_handler(1, dev);
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 7e77328142ff..1eaba035cb2a 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -10,6 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
 #include <linux/sizes.h>
+#include <linux/delay.h>
 
 #include "mei_dev.h"
 #include "hbm.h"
@@ -327,9 +328,12 @@ static void mei_me_intr_clear(struct mei_device *dev)
  */
 static void mei_me_intr_enable(struct mei_device *dev)
 {
-	u32 hcsr = mei_hcsr_read(dev);
+	u32 hcsr;
+
+	if (mei_me_hw_use_polling(to_me_hw(dev)))
+		return;
 
-	hcsr |= H_CSR_IE_MASK;
+	hcsr = mei_hcsr_read(dev) | H_CSR_IE_MASK;
 	mei_hcsr_set(dev, hcsr);
 }
 
@@ -354,6 +358,9 @@ static void mei_me_synchronize_irq(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 
+	if (mei_me_hw_use_polling(hw))
+		return;
+
 	synchronize_irq(hw->irq);
 }
 
@@ -380,7 +387,10 @@ static void mei_me_host_set_ready(struct mei_device *dev)
 {
 	u32 hcsr = mei_hcsr_read(dev);
 
-	hcsr |= H_CSR_IE_MASK | H_IG | H_RDY;
+	if (!mei_me_hw_use_polling(to_me_hw(dev)))
+		hcsr |= H_CSR_IE_MASK;
+
+	hcsr |=  H_IG | H_RDY;
 	mei_hcsr_set(dev, hcsr);
 }
 
@@ -1174,7 +1184,7 @@ static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
 
 	hcsr |= H_RST | H_IG | H_CSR_IS_MASK;
 
-	if (!intr_enable)
+	if (!intr_enable || mei_me_hw_use_polling(to_me_hw(dev)))
 		hcsr &= ~H_CSR_IE_MASK;
 
 	dev->recvd_hw_ready = false;
@@ -1323,6 +1333,46 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 }
 EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler);
 
+#define MEI_POLLING_TIMEOUT_ACTIVE 100
+#define MEI_POLLING_TIMEOUT_IDLE   500
+
+int mei_me_polling_thread(void *_dev)
+{
+	struct mei_device *dev = _dev;
+	irqreturn_t irq_ret;
+	long polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE;
+
+	dev_dbg(dev->dev, "kernel thread is running\n");
+	while (!kthread_should_stop()) {
+		struct mei_me_hw *hw = to_me_hw(dev);
+		u32 hcsr;
+
+		wait_event_timeout(hw->wait_active,
+				   hw->is_active || kthread_should_stop(),
+				   msecs_to_jiffies(MEI_POLLING_TIMEOUT_IDLE));
+
+		if (kthread_should_stop())
+			break;
+
+		hcsr = mei_hcsr_read(dev);
+		if (me_intr_src(hcsr)) {
+			polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE;
+			irq_ret = mei_me_irq_thread_handler(1, dev);
+			if (irq_ret != IRQ_HANDLED)
+				dev_err(dev->dev, "irq_ret %d\n", irq_ret);
+		} else {
+			polling_timeout = clamp_val(polling_timeout + MEI_POLLING_TIMEOUT_ACTIVE,
+						    MEI_POLLING_TIMEOUT_ACTIVE,
+						    MEI_POLLING_TIMEOUT_IDLE);
+		}
+
+		schedule_timeout_interruptible(msecs_to_jiffies(polling_timeout));
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mei_me_polling_thread);
+
 static const struct mei_hw_ops mei_me_hw_ops = {
 
 	.trc_status = mei_me_trc_status,
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
index a071c645e905..ca09274ac299 100644
--- a/drivers/misc/mei/hw-me.h
+++ b/drivers/misc/mei/hw-me.h
@@ -51,6 +51,8 @@ struct mei_cfg {
  * @d0i3_supported: di03 support
  * @hbuf_depth: depth of hardware host/write buffer in slots
  * @read_fws: read FW status register handler
+ * @wait_active: the polling thread activity wait queue
+ * @is_active: the device is active
  */
 struct mei_me_hw {
 	const struct mei_cfg *cfg;
@@ -60,10 +62,19 @@ struct mei_me_hw {
 	bool d0i3_supported;
 	u8 hbuf_depth;
 	int (*read_fws)(const struct mei_device *dev, int where, u32 *val);
+	/* polling */
+	struct task_struct *polling_thread;
+	wait_queue_head_t wait_active;
+	bool is_active;
 };
 
 #define to_me_hw(dev) (struct mei_me_hw *)((dev)->hw)
 
+static inline bool mei_me_hw_use_polling(const struct mei_me_hw *hw)
+{
+	return hw->irq < 0;
+}
+
 /**
  * enum mei_cfg_idx - indices to platform specific configurations.
  *
@@ -127,5 +138,6 @@ int mei_me_pg_exit_sync(struct mei_device *dev);
 
 irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id);
 irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id);
+int mei_me_polling_thread(void *_dev);
 
 #endif /* _MEI_INTERFACE_H_ */
-- 
2.32.0

[PATCH 6/7] mei: gsc: wait for reset thread on stop

[Alexander Usyskin]

Wait for reset work to complete before initiating
stop reset flow sequence.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
 drivers/misc/mei/init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index f79076c67256..873fa96fa29c 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -315,6 +315,8 @@ void mei_stop(struct mei_device *dev)
 
 	mei_clear_interrupts(dev);
 	mei_synchronize_irq(dev);
+	/* to catch HW-initiated reset */
+	mei_cancel_work(dev);
 
 	mutex_lock(&dev->device_lock);
 
-- 
2.32.0

[PATCH 7/7] mei: extend timeouts on slow devices.

[Alexander Usyskin]

Parametrize operational timeouts in order
to support slow firmware on some graphic devices.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
 drivers/misc/mei/bus-fixup.c |  3 +--
 drivers/misc/mei/client.c    | 14 +++++++-------
 drivers/misc/mei/gsc-me.c    |  2 +-
 drivers/misc/mei/hbm.c       | 12 ++++++------
 drivers/misc/mei/hw-me.c     | 30 ++++++++++++++++--------------
 drivers/misc/mei/hw-me.h     |  2 +-
 drivers/misc/mei/hw-txe.c    |  2 +-
 drivers/misc/mei/hw.h        |  5 +++++
 drivers/misc/mei/init.c      | 19 ++++++++++++++++++-
 drivers/misc/mei/main.c      |  2 +-
 drivers/misc/mei/mei_dev.h   | 16 ++++++++++++++++
 drivers/misc/mei/pci-me.c    |  2 +-
 12 files changed, 74 insertions(+), 35 deletions(-)

diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 59506ba6fc48..24e91a9ea558 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -164,7 +164,6 @@ static int mei_osver(struct mei_cl_device *cldev)
 			    sizeof(struct mkhi_fw_ver))
 #define MKHI_FWVER_LEN(__num) (sizeof(struct mkhi_msg_hdr) + \
 			       sizeof(struct mkhi_fw_ver_block) * (__num))
-#define MKHI_RCV_TIMEOUT 500 /* receive timeout in msec */
 static int mei_fwver(struct mei_cl_device *cldev)
 {
 	char buf[MKHI_FWVER_BUF_LEN];
@@ -187,7 +186,7 @@ static int mei_fwver(struct mei_cl_device *cldev)
 
 	ret = 0;
 	bytes_recv = __mei_cl_recv(cldev->cl, buf, sizeof(buf), NULL, 0,
-				   MKHI_RCV_TIMEOUT);
+				   cldev->bus->timeouts.mkhi_recv);
 	if (bytes_recv < 0 || (size_t)bytes_recv < MKHI_FWVER_LEN(1)) {
 		/*
 		 * Should be at least one version block,
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 06734670a732..5cdc78b68044 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -870,7 +870,7 @@ static int mei_cl_send_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb)
 	}
 
 	list_move_tail(&cb->list, &dev->ctrl_rd_list);
-	cl->timer_count = MEI_CONNECT_TIMEOUT;
+	cl->timer_count = dev->timeouts.connect;
 	mei_schedule_stall_timer(dev);
 
 	return 0;
@@ -945,7 +945,7 @@ static int __mei_cl_disconnect(struct mei_cl *cl)
 	wait_event_timeout(cl->wait,
 			   cl->state == MEI_FILE_DISCONNECT_REPLY ||
 			   cl->state == MEI_FILE_DISCONNECTED,
-			   mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+			   dev->timeouts.cl_connect);
 	mutex_lock(&dev->device_lock);
 
 	rets = cl->status;
@@ -1065,7 +1065,7 @@ static int mei_cl_send_connect(struct mei_cl *cl, struct mei_cl_cb *cb)
 	}
 
 	list_move_tail(&cb->list, &dev->ctrl_rd_list);
-	cl->timer_count = MEI_CONNECT_TIMEOUT;
+	cl->timer_count = dev->timeouts.connect;
 	mei_schedule_stall_timer(dev);
 	return 0;
 }
@@ -1164,7 +1164,7 @@ int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl,
 			 cl->state == MEI_FILE_DISCONNECTED ||
 			 cl->state == MEI_FILE_DISCONNECT_REQUIRED ||
 			 cl->state == MEI_FILE_DISCONNECT_REPLY),
-			mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+			dev->timeouts.cl_connect);
 	mutex_lock(&dev->device_lock);
 
 	if (!mei_cl_is_connected(cl)) {
@@ -1562,7 +1562,7 @@ int mei_cl_notify_request(struct mei_cl *cl,
 			   cl->notify_en == request ||
 			   cl->status ||
 			   !mei_cl_is_connected(cl),
-			   mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+			   dev->timeouts.cl_connect);
 	mutex_lock(&dev->device_lock);
 
 	if (cl->notify_en != request && !cl->status)
@@ -2335,7 +2335,7 @@ int mei_cl_dma_alloc_and_map(struct mei_cl *cl, const struct file *fp,
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(cl->wait,
 			   cl->dma_mapped || cl->status,
-			   mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+			   dev->timeouts.cl_connect);
 	mutex_lock(&dev->device_lock);
 
 	if (!cl->dma_mapped && !cl->status)
@@ -2414,7 +2414,7 @@ int mei_cl_dma_unmap(struct mei_cl *cl, const struct file *fp)
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(cl->wait,
 			   !cl->dma_mapped || cl->status,
-			   mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+			   dev->timeouts.cl_connect);
 	mutex_lock(&dev->device_lock);
 
 	if (cl->dma_mapped && !cl->status)
diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c
index ffe9bf980f92..4dfb9afeb4c6 100644
--- a/drivers/misc/mei/gsc-me.c
+++ b/drivers/misc/mei/gsc-me.c
@@ -48,7 +48,7 @@ static int mei_gsc_probe(struct auxiliary_device *aux_dev,
 
 	device = &aux_dev->dev;
 
-	dev = mei_me_dev_init(device, cfg);
+	dev = mei_me_dev_init(device, cfg, adev->slow_fw);
 	if (IS_ERR(dev)) {
 		ret = PTR_ERR(dev);
 		goto err;
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index cebcca6d6d3e..4ff4dbfd07c0 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -232,7 +232,7 @@ int mei_hbm_start_wait(struct mei_device *dev)
 	mutex_unlock(&dev->device_lock);
 	ret = wait_event_timeout(dev->wait_hbm_start,
 			dev->hbm_state != MEI_HBM_STARTING,
-			mei_secs_to_jiffies(MEI_HBM_TIMEOUT));
+			dev->timeouts.hbm);
 	mutex_lock(&dev->device_lock);
 
 	if (ret == 0 && (dev->hbm_state <= MEI_HBM_STARTING)) {
@@ -275,7 +275,7 @@ int mei_hbm_start_req(struct mei_device *dev)
 	}
 
 	dev->hbm_state = MEI_HBM_STARTING;
-	dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+	dev->init_clients_timer = dev->timeouts.client_init;
 	mei_schedule_stall_timer(dev);
 	return 0;
 }
@@ -316,7 +316,7 @@ static int mei_hbm_dma_setup_req(struct mei_device *dev)
 	}
 
 	dev->hbm_state = MEI_HBM_DR_SETUP;
-	dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+	dev->init_clients_timer = dev->timeouts.client_init;
 	mei_schedule_stall_timer(dev);
 	return 0;
 }
@@ -351,7 +351,7 @@ static int mei_hbm_capabilities_req(struct mei_device *dev)
 	}
 
 	dev->hbm_state = MEI_HBM_CAP_SETUP;
-	dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+	dev->init_clients_timer = dev->timeouts.client_init;
 	mei_schedule_stall_timer(dev);
 	return 0;
 }
@@ -385,7 +385,7 @@ static int mei_hbm_enum_clients_req(struct mei_device *dev)
 		return ret;
 	}
 	dev->hbm_state = MEI_HBM_ENUM_CLIENTS;
-	dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+	dev->init_clients_timer = dev->timeouts.client_init;
 	mei_schedule_stall_timer(dev);
 	return 0;
 }
@@ -751,7 +751,7 @@ static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx)
 		return ret;
 	}
 
-	dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT;
+	dev->init_clients_timer = dev->timeouts.client_init;
 	mei_schedule_stall_timer(dev);
 
 	return 0;
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 1eaba035cb2a..bc438e750bbb 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -445,7 +445,7 @@ static int mei_me_hw_ready_wait(struct mei_device *dev)
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_hw_ready,
 			dev->recvd_hw_ready,
-			mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT));
+			dev->timeouts.hw_ready);
 	mutex_lock(&dev->device_lock);
 	if (!dev->recvd_hw_ready) {
 		dev_err(dev->dev, "wait hw ready failed\n");
@@ -707,7 +707,6 @@ static void mei_me_pg_unset(struct mei_device *dev)
 static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
-	unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
 	int ret;
 
 	dev->pg_event = MEI_PG_EVENT_WAIT;
@@ -718,7 +717,8 @@ static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
 
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_pg,
-		dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+		dev->pg_event == MEI_PG_EVENT_RECEIVED,
+		dev->timeouts.pgi);
 	mutex_lock(&dev->device_lock);
 
 	if (dev->pg_event == MEI_PG_EVENT_RECEIVED) {
@@ -744,7 +744,6 @@ static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
 static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
-	unsigned long timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
 	int ret;
 
 	if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
@@ -756,7 +755,8 @@ static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
 
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_pg,
-		dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout);
+		dev->pg_event == MEI_PG_EVENT_RECEIVED,
+		dev->timeouts.pgi);
 	mutex_lock(&dev->device_lock);
 
 reply:
@@ -772,7 +772,8 @@ static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
 
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_pg,
-		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
+		dev->timeouts.pgi);
 	mutex_lock(&dev->device_lock);
 
 	if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
@@ -887,8 +888,6 @@ static u32 mei_me_d0i3_unset(struct mei_device *dev)
 static int mei_me_d0i3_enter_sync(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
-	unsigned long d0i3_timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
-	unsigned long pgi_timeout = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
 	int ret;
 	u32 reg;
 
@@ -910,7 +909,8 @@ static int mei_me_d0i3_enter_sync(struct mei_device *dev)
 
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_pg,
-		dev->pg_event == MEI_PG_EVENT_RECEIVED, pgi_timeout);
+		dev->pg_event == MEI_PG_EVENT_RECEIVED,
+		dev->timeouts.pgi);
 	mutex_lock(&dev->device_lock);
 
 	if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
@@ -930,7 +930,8 @@ static int mei_me_d0i3_enter_sync(struct mei_device *dev)
 
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_pg,
-		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, d0i3_timeout);
+		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
+		dev->timeouts.d0i3);
 	mutex_lock(&dev->device_lock);
 
 	if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
@@ -990,7 +991,6 @@ static int mei_me_d0i3_enter(struct mei_device *dev)
 static int mei_me_d0i3_exit_sync(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
-	unsigned long timeout = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
 	int ret;
 	u32 reg;
 
@@ -1013,7 +1013,8 @@ static int mei_me_d0i3_exit_sync(struct mei_device *dev)
 
 	mutex_unlock(&dev->device_lock);
 	wait_event_timeout(dev->wait_pg,
-		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, timeout);
+		dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
+		dev->timeouts.pgi);
 	mutex_lock(&dev->device_lock);
 
 	if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
@@ -1677,11 +1678,12 @@ EXPORT_SYMBOL_GPL(mei_me_get_cfg);
  *
  * @parent: device associated with physical device (pci/platform)
  * @cfg: per device generation config
+ * @slow_fw: configure longer timeouts as FW is slow
  *
  * Return: The mei_device pointer on success, NULL on failure.
  */
 struct mei_device *mei_me_dev_init(struct device *parent,
-				   const struct mei_cfg *cfg)
+				   const struct mei_cfg *cfg, bool slow_fw)
 {
 	struct mei_device *dev;
 	struct mei_me_hw *hw;
@@ -1696,7 +1698,7 @@ struct mei_device *mei_me_dev_init(struct device *parent,
 	for (i = 0; i < DMA_DSCR_NUM; i++)
 		dev->dr_dscr[i].size = cfg->dma_size[i];
 
-	mei_device_init(dev, parent, &mei_me_hw_ops);
+	mei_device_init(dev, parent, slow_fw, &mei_me_hw_ops);
 	hw->cfg = cfg;
 
 	dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
index ca09274ac299..0e9d90808bcf 100644
--- a/drivers/misc/mei/hw-me.h
+++ b/drivers/misc/mei/hw-me.h
@@ -131,7 +131,7 @@ enum mei_cfg_idx {
 const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx);
 
 struct mei_device *mei_me_dev_init(struct device *parent,
-				   const struct mei_cfg *cfg);
+				   const struct mei_cfg *cfg, bool slow_fw);
 
 int mei_me_pg_enter_sync(struct mei_device *dev);
 int mei_me_pg_exit_sync(struct mei_device *dev);
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
index 00652c137cc7..fccfa806bd63 100644
--- a/drivers/misc/mei/hw-txe.c
+++ b/drivers/misc/mei/hw-txe.c
@@ -1201,7 +1201,7 @@ struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
 	if (!dev)
 		return NULL;
 
-	mei_device_init(dev, &pdev->dev, &mei_txe_hw_ops);
+	mei_device_init(dev, &pdev->dev, false, &mei_txe_hw_ops);
 
 	hw = to_txe_hw(dev);
 
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index b46077b17114..9381e5c13b4f 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -16,11 +16,16 @@
 #define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
 
 #define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
+#define MEI_CL_CONNECT_TIMEOUT_SLOW 30 /* HPS: Client Connect Timeout, slow FW */
 #define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
 
 #define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
 #define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
 #define MEI_HBM_TIMEOUT             1  /* 1 second */
+#define MEI_HBM_TIMEOUT_SLOW        5  /* 5 second, slow FW */
+
+#define MKHI_RCV_TIMEOUT 500 /* receive timeout in msec */
+#define MKHI_RCV_TIMEOUT_SLOW 10000 /* receive timeout in msec, slow FW */
 
 /*
  * FW page size for DMA allocations
diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c
index 873fa96fa29c..88ee5351579f 100644
--- a/drivers/misc/mei/init.c
+++ b/drivers/misc/mei/init.c
@@ -354,14 +354,16 @@ bool mei_write_is_idle(struct mei_device *dev)
 EXPORT_SYMBOL_GPL(mei_write_is_idle);
 
 /**
- * mei_device_init  -- initialize mei_device structure
+ * mei_device_init - initialize mei_device structure
  *
  * @dev: the mei device
  * @device: the device structure
+ * @slow_fw: configure longer timeouts as FW is slow
  * @hw_ops: hw operations
  */
 void mei_device_init(struct mei_device *dev,
 		     struct device *device,
+		     bool slow_fw,
 		     const struct mei_hw_ops *hw_ops)
 {
 	/* setup our list array */
@@ -399,6 +401,21 @@ void mei_device_init(struct mei_device *dev,
 	dev->pg_event = MEI_PG_EVENT_IDLE;
 	dev->ops      = hw_ops;
 	dev->dev      = device;
+
+	dev->timeouts.hw_ready = mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT);
+	dev->timeouts.connect = MEI_CONNECT_TIMEOUT;
+	dev->timeouts.client_init = MEI_CLIENTS_INIT_TIMEOUT;
+	dev->timeouts.pgi = mei_secs_to_jiffies(MEI_PGI_TIMEOUT);
+	dev->timeouts.d0i3 = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT);
+	if (slow_fw) {
+		dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT_SLOW);
+		dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT_SLOW);
+		dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT_SLOW);
+	} else {
+		dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT);
+		dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT);
+		dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT);
+	}
 }
 EXPORT_SYMBOL_GPL(mei_device_init);
 
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 786f7c8f7f61..261939b945ef 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -571,7 +571,7 @@ static int mei_ioctl_connect_vtag(struct file *file,
 				    cl->state == MEI_FILE_DISCONNECTED ||
 				    cl->state == MEI_FILE_DISCONNECT_REQUIRED ||
 				    cl->state == MEI_FILE_DISCONNECT_REPLY),
-				   mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT));
+				   dev->timeouts.cl_connect);
 		mutex_lock(&dev->device_lock);
 	}
 
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 694f866f87ef..16f59b3a45fc 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -415,6 +415,17 @@ struct mei_fw_version {
 
 #define MEI_MAX_FW_VER_BLOCKS 3
 
+struct mei_dev_timeouts {
+	unsigned long hw_ready; /* Timeout on ready message, in jiffies */
+	int connect; /* HPS: at least 2 seconds, in seconds */
+	unsigned long cl_connect; /* HPS: Client Connect Timeout, in jiffies */
+	int client_init; /* HPS: Clients Enumeration Timeout, in seconds */
+	unsigned long pgi; /* PG Isolation time response, in jiffies */
+	unsigned int d0i3; /* D0i3 set/unset max response time, in jiffies */
+	unsigned long hbm; /* HBM operation timeout, in jiffies */
+	unsigned long mkhi_recv; /* receive timeout, in jiffies */
+};
+
 /**
  * struct mei_device -  MEI private device struct
  *
@@ -480,6 +491,8 @@ struct mei_fw_version {
  * @allow_fixed_address: allow user space to connect a fixed client
  * @override_fixed_address: force allow fixed address behavior
  *
+ * @timeouts: actual timeout values
+ *
  * @reset_work  : work item for the device reset
  * @bus_rescan_work : work item for the bus rescan
  *
@@ -568,6 +581,8 @@ struct mei_device {
 	bool allow_fixed_address;
 	bool override_fixed_address;
 
+	struct mei_dev_timeouts timeouts;
+
 	struct work_struct reset_work;
 	struct work_struct bus_rescan_work;
 
@@ -632,6 +647,7 @@ static inline u32 mei_slots2data(int slots)
  */
 void mei_device_init(struct mei_device *dev,
 		     struct device *device,
+		     bool slow_fw,
 		     const struct mei_hw_ops *hw_ops);
 int mei_reset(struct mei_device *dev);
 int mei_start(struct mei_device *dev);
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 3a45aaf002ac..4ac163131be8 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -206,7 +206,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* allocates and initializes the mei dev structure */
-	dev = mei_me_dev_init(&pdev->dev, cfg);
+	dev = mei_me_dev_init(&pdev->dev, cfg, false);
 	if (!dev) {
 		err = -ENOMEM;
 		goto end;
-- 
2.32.0