From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org
Cc: bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com,
agross@kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, maz@kernel.org,
quic_mkshah@quicinc.com, linux-gpio@vger.kernel.org,
linus.walleij@linaro.org, robh+dt@kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: [PATCH v2 2/4] pinctrl: qcom: sm8150: Specify PDC map
Date: Sun, 27 Feb 2022 00:10:26 +0530 [thread overview]
Message-ID: <20220226184028.111566-3-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20220226184028.111566-1-bhupesh.sharma@linaro.org>
Specify the PDC mapping for SM8150, so that gpio interrupts are
properly mapped to the wakeup IRQs of the PDC.
Cc: Maulik Shah <quic_mkshah@quicinc.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
drivers/pinctrl/qcom/pinctrl-sm8150.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c
index 7359bae68c69..1cc622694553 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8150.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c
@@ -1500,6 +1500,25 @@ static const struct msm_pingroup sm8150_groups[] = {
[178] = SDC_QDSD_PINGROUP(sdc2_data, 0xB2000, 9, 0),
};
+static const struct msm_gpio_wakeirq_map sm8150_pdc_map[] = {
+ { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 },
+ { 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 },
+ { 30, 39 }, { 36, 43 }, { 37, 44 }, { 38, 30 }, { 39, 118 },
+ { 39, 125 }, { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 },
+ { 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 51, 123 },
+ { 53, 54 }, { 54, 55 }, { 55, 56 }, { 56, 57 }, { 58, 58 },
+ { 60, 60 }, { 61, 61 }, { 68, 62 }, { 70, 63 }, { 76, 71 },
+ { 77, 66 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 },
+ { 88, 117 }, { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 },
+ { 95, 72 }, { 96, 73 }, { 97, 74 }, { 101, 40 }, { 103, 77 },
+ { 104, 78 }, { 108, 79 }, { 112, 80 }, { 113, 81 }, { 114, 82 },
+ { 117, 85 }, { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 },
+ { 122, 90 }, { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 },
+ { 132, 105 }, { 133, 83 }, { 134, 36 }, { 136, 97 }, { 142, 103 },
+ { 144, 115 }, { 144, 122 }, { 147, 102 }, { 150, 107 },
+ { 152, 108 }, { 153, 109 }
+};
+
static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
.pins = sm8150_pins,
.npins = ARRAY_SIZE(sm8150_pins),
@@ -1510,6 +1529,9 @@ static const struct msm_pinctrl_soc_data sm8150_pinctrl = {
.ngpios = 176,
.tiles = sm8150_tiles,
.ntiles = ARRAY_SIZE(sm8150_tiles),
+ .wakeirq_map = sm8150_pdc_map,
+ .nwakeirq_map = ARRAY_SIZE(sm8150_pdc_map),
+ .wakeirq_dual_edge_errata = true,
};
static int sm8150_pinctrl_probe(struct platform_device *pdev)
--
2.35.1
next prev parent reply other threads:[~2022-02-26 18:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-26 18:40 [PATCH v2 0/4] Add support for PDC interrupt controller for sm8150 Bhupesh Sharma
2022-02-26 18:40 ` [PATCH v2 1/4] dt-bindings: qcom,pdc: Add compatible for SM8150 Bhupesh Sharma
2022-03-15 16:09 ` Bjorn Andersson
2022-04-17 23:10 ` Linus Walleij
2022-02-26 18:40 ` Bhupesh Sharma [this message]
2022-03-15 16:10 ` [PATCH v2 2/4] pinctrl: qcom: sm8150: Specify PDC map Bjorn Andersson
2022-04-17 23:11 ` Linus Walleij
2022-02-26 18:40 ` [PATCH v2 3/4] arm64: dts: qcom: sm8150: Add pdc interrupt controller node Bhupesh Sharma
2022-03-15 16:18 ` Bjorn Andersson
2022-03-17 5:51 ` Bhupesh Sharma
2022-03-24 12:25 ` Bjorn Andersson
2022-02-26 18:40 ` [PATCH v2 4/4] arm64: dts: qcom: sm8150: Add PDC as the interrupt parent for tlmm Bhupesh Sharma
2022-03-15 16:19 ` Bjorn Andersson
2022-03-15 1:06 ` [PATCH v2 0/4] Add support for PDC interrupt controller for sm8150 Linus Walleij
2022-03-15 3:45 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220226184028.111566-3-bhupesh.sharma@linaro.org \
--to=bhupesh.sharma@linaro.org \
--cc=agross@kernel.org \
--cc=bhupesh.linux@gmail.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=quic_mkshah@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).