[PATCH V2 0/4] Add tracer tool for AMD P-State driver

[PATCH V2 0/4] Add tracer tool for AMD P-State driver

[Jinzhou Su]

Hello,

intel_pstate_tracer is a useful tool to analyze the performance of
intel_pstate driver. We upstream out AMD P-state driver into Linux
kernel recently and like to use similar tool to tune the performance
of the driver.

I modified intel_pstate_tracer.py then it could import as a module to
analyze AMD P-State trace event. Other trace event also can benifit from
this change once they need this tool.

intel_pstate_tracer could be used as the same way as before and the
original functionality isn't broken.

Changes from V1->V2
-Add tracer documentation in amd-pstate RST
-fix typo in amd_pstate_trace.py
-add "Co-developed-by" in patch 1/4

Thanks,
Joe

Jinzhou Su (4):
  cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
  tools/power/x86/intel_pstate_tracer: make tracer as a module
  tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
  Documentation: amd-pstate: add tracer tool introduction

 Documentation/admin-guide/pm/amd-pstate.rst   |  26 ++
 MAINTAINERS                                   |   1 +
 drivers/cpufreq/amd-pstate-trace.h            |  22 +-
 drivers/cpufreq/amd-pstate.c                  |  59 ++-
 .../x86/amd_pstate_tracer/amd_pstate_trace.py | 354 ++++++++++++++++++
 .../intel_pstate_tracer.py                    | 260 +++++++------
 6 files changed, 588 insertions(+), 134 deletions(-)
 create mode 100755 tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py

-- 
2.27.0

[PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module

[Jinzhou Su]

Add frequency, mperf, aperf and tsc in the trace. This can be used
to debug and tune the performance of AMD P-state driver.

Use the time difference between amd_pstate_update to calculate CPU
frequency. There could be sleep in arch_freq_get_on_cpu, so do not
use it here.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Co-developed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
---
 drivers/cpufreq/amd-pstate-trace.h | 22 ++++++++++-
 drivers/cpufreq/amd-pstate.c       | 59 +++++++++++++++++++++++++++++-
 2 files changed, 78 insertions(+), 3 deletions(-)

diff --git a/drivers/cpufreq/amd-pstate-trace.h b/drivers/cpufreq/amd-pstate-trace.h
index 647505957d4f..35f38ae67fb1 100644
--- a/drivers/cpufreq/amd-pstate-trace.h
+++ b/drivers/cpufreq/amd-pstate-trace.h
@@ -27,6 +27,10 @@ TRACE_EVENT(amd_pstate_perf,
 	TP_PROTO(unsigned long min_perf,
 		 unsigned long target_perf,
 		 unsigned long capacity,
+		 u64 freq,
+		 u64 mperf,
+		 u64 aperf,
+		 u64 tsc,
 		 unsigned int cpu_id,
 		 bool changed,
 		 bool fast_switch
@@ -35,6 +39,10 @@ TRACE_EVENT(amd_pstate_perf,
 	TP_ARGS(min_perf,
 		target_perf,
 		capacity,
+		freq,
+		mperf,
+		aperf,
+		tsc,
 		cpu_id,
 		changed,
 		fast_switch
@@ -44,6 +52,10 @@ TRACE_EVENT(amd_pstate_perf,
 		__field(unsigned long, min_perf)
 		__field(unsigned long, target_perf)
 		__field(unsigned long, capacity)
+		__field(unsigned long long, freq)
+		__field(unsigned long long, mperf)
+		__field(unsigned long long, aperf)
+		__field(unsigned long long, tsc)
 		__field(unsigned int, cpu_id)
 		__field(bool, changed)
 		__field(bool, fast_switch)
@@ -53,15 +65,23 @@ TRACE_EVENT(amd_pstate_perf,
 		__entry->min_perf = min_perf;
 		__entry->target_perf = target_perf;
 		__entry->capacity = capacity;
+		__entry->freq = freq;
+		__entry->mperf = mperf;
+		__entry->aperf = aperf;
+		__entry->tsc = tsc;
 		__entry->cpu_id = cpu_id;
 		__entry->changed = changed;
 		__entry->fast_switch = fast_switch;
 		),
 
-	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
+	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s fast_switch=%s",
 		  (unsigned long)__entry->min_perf,
 		  (unsigned long)__entry->target_perf,
 		  (unsigned long)__entry->capacity,
+		  (unsigned long long)__entry->freq,
+		  (unsigned long long)__entry->mperf,
+		  (unsigned long long)__entry->aperf,
+		  (unsigned long long)__entry->tsc,
 		  (unsigned int)__entry->cpu_id,
 		  (__entry->changed) ? "true" : "false",
 		  (__entry->fast_switch) ? "true" : "false"
diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 9ce75ed11f8e..7be38bc6a673 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -65,6 +65,18 @@ MODULE_PARM_DESC(shared_mem,
 
 static struct cpufreq_driver amd_pstate_driver;
 
+/**
+ * struct  amd_aperf_mperf
+ * @aperf: actual performance frequency clock count
+ * @mperf: maximum performance frequency clock count
+ * @tsc:   time stamp counter
+ */
+struct amd_aperf_mperf {
+	u64 aperf;
+	u64 mperf;
+	u64 tsc;
+};
+
 /**
  * struct amd_cpudata - private CPU data for AMD P-State
  * @cpu: CPU number
@@ -81,6 +93,9 @@ static struct cpufreq_driver amd_pstate_driver;
  * @min_freq: the frequency that mapped to lowest_perf
  * @nominal_freq: the frequency that mapped to nominal_perf
  * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
+ * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
+ * @prev: Last Aperf/Mperf/tsc count value read from register
+ * @freq: current cpu frequency value
  * @boost_supported: check whether the Processor or SBIOS supports boost mode
  *
  * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
@@ -102,6 +117,10 @@ struct amd_cpudata {
 	u32	nominal_freq;
 	u32	lowest_nonlinear_freq;
 
+	struct amd_aperf_mperf cur;
+	struct amd_aperf_mperf prev;
+
+	u64 freq;
 	bool	boost_supported;
 };
 
@@ -211,6 +230,39 @@ static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata,
 					    max_perf, fast_switch);
 }
 
+static inline bool amd_pstate_sample(struct amd_cpudata *cpudata)
+{
+	u64 aperf, mperf, tsc;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	rdmsrl(MSR_IA32_APERF, aperf);
+	rdmsrl(MSR_IA32_MPERF, mperf);
+	tsc = rdtsc();
+
+	if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) {
+		local_irq_restore(flags);
+		return false;
+	}
+
+	local_irq_restore(flags);
+
+	cpudata->cur.aperf = aperf;
+	cpudata->cur.mperf = mperf;
+	cpudata->cur.tsc =  tsc;
+	cpudata->cur.aperf -= cpudata->prev.aperf;
+	cpudata->cur.mperf -= cpudata->prev.mperf;
+	cpudata->cur.tsc -= cpudata->prev.tsc;
+
+	cpudata->prev.aperf = aperf;
+	cpudata->prev.mperf = mperf;
+	cpudata->prev.tsc = tsc;
+
+	cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz), cpudata->cur.mperf);
+
+	return true;
+}
+
 static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
 			      u32 des_perf, u32 max_perf, bool fast_switch)
 {
@@ -226,8 +278,11 @@ static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
 	value &= ~AMD_CPPC_MAX_PERF(~0L);
 	value |= AMD_CPPC_MAX_PERF(max_perf);
 
-	trace_amd_pstate_perf(min_perf, des_perf, max_perf,
-			      cpudata->cpu, (value != prev), fast_switch);
+	if (trace_amd_pstate_perf_enabled() && amd_pstate_sample(cpudata)) {
+		trace_amd_pstate_perf(min_perf, des_perf, max_perf, cpudata->freq,
+			cpudata->cur.mperf, cpudata->cur.aperf, cpudata->cur.tsc,
+				cpudata->cpu, (value != prev), fast_switch);
+	}
 
 	if (value == prev)
 		return;
-- 
2.27.0

Re: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module

[Huang Rui]

On Fri, Mar 04, 2022 at 02:07:21PM +0800, Su, Jinzhou (Joe) wrote:
> Add frequency, mperf, aperf and tsc in the trace. This can be used
> to debug and tune the performance of AMD P-state driver.
> 
> Use the time difference between amd_pstate_update to calculate CPU
> frequency. There could be sleep in arch_freq_get_on_cpu, so do not
> use it here.
> 
> Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> Co-developed-by: Huang Rui <ray.huang@amd.com>
> Signed-off-by: Huang Rui <ray.huang@amd.com>

Let's remove "Signed-off-by" of me, just leave "Co-developed-by".

> ---
>  drivers/cpufreq/amd-pstate-trace.h | 22 ++++++++++-
>  drivers/cpufreq/amd-pstate.c       | 59 +++++++++++++++++++++++++++++-
>  2 files changed, 78 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/cpufreq/amd-pstate-trace.h b/drivers/cpufreq/amd-pstate-trace.h
> index 647505957d4f..35f38ae67fb1 100644
> --- a/drivers/cpufreq/amd-pstate-trace.h
> +++ b/drivers/cpufreq/amd-pstate-trace.h
> @@ -27,6 +27,10 @@ TRACE_EVENT(amd_pstate_perf,
>  	TP_PROTO(unsigned long min_perf,
>  		 unsigned long target_perf,
>  		 unsigned long capacity,
> +		 u64 freq,
> +		 u64 mperf,
> +		 u64 aperf,
> +		 u64 tsc,
>  		 unsigned int cpu_id,
>  		 bool changed,
>  		 bool fast_switch
> @@ -35,6 +39,10 @@ TRACE_EVENT(amd_pstate_perf,
>  	TP_ARGS(min_perf,
>  		target_perf,
>  		capacity,
> +		freq,
> +		mperf,
> +		aperf,
> +		tsc,
>  		cpu_id,
>  		changed,
>  		fast_switch
> @@ -44,6 +52,10 @@ TRACE_EVENT(amd_pstate_perf,
>  		__field(unsigned long, min_perf)
>  		__field(unsigned long, target_perf)
>  		__field(unsigned long, capacity)
> +		__field(unsigned long long, freq)
> +		__field(unsigned long long, mperf)
> +		__field(unsigned long long, aperf)
> +		__field(unsigned long long, tsc)
>  		__field(unsigned int, cpu_id)
>  		__field(bool, changed)
>  		__field(bool, fast_switch)
> @@ -53,15 +65,23 @@ TRACE_EVENT(amd_pstate_perf,
>  		__entry->min_perf = min_perf;
>  		__entry->target_perf = target_perf;
>  		__entry->capacity = capacity;
> +		__entry->freq = freq;
> +		__entry->mperf = mperf;
> +		__entry->aperf = aperf;
> +		__entry->tsc = tsc;
>  		__entry->cpu_id = cpu_id;
>  		__entry->changed = changed;
>  		__entry->fast_switch = fast_switch;
>  		),
>  
> -	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
> +	TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s fast_switch=%s",
>  		  (unsigned long)__entry->min_perf,
>  		  (unsigned long)__entry->target_perf,
>  		  (unsigned long)__entry->capacity,
> +		  (unsigned long long)__entry->freq,
> +		  (unsigned long long)__entry->mperf,
> +		  (unsigned long long)__entry->aperf,
> +		  (unsigned long long)__entry->tsc,
>  		  (unsigned int)__entry->cpu_id,
>  		  (__entry->changed) ? "true" : "false",
>  		  (__entry->fast_switch) ? "true" : "false"
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 9ce75ed11f8e..7be38bc6a673 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -65,6 +65,18 @@ MODULE_PARM_DESC(shared_mem,
>  
>  static struct cpufreq_driver amd_pstate_driver;
>  
> +/**
> + * struct  amd_aperf_mperf
> + * @aperf: actual performance frequency clock count
> + * @mperf: maximum performance frequency clock count
> + * @tsc:   time stamp counter
> + */
> +struct amd_aperf_mperf {
> +	u64 aperf;
> +	u64 mperf;
> +	u64 tsc;
> +};
> +
>  /**
>   * struct amd_cpudata - private CPU data for AMD P-State
>   * @cpu: CPU number
> @@ -81,6 +93,9 @@ static struct cpufreq_driver amd_pstate_driver;
>   * @min_freq: the frequency that mapped to lowest_perf
>   * @nominal_freq: the frequency that mapped to nominal_perf
>   * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
> + * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
> + * @prev: Last Aperf/Mperf/tsc count value read from register
> + * @freq: current cpu frequency value
>   * @boost_supported: check whether the Processor or SBIOS supports boost mode
>   *
>   * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
> @@ -102,6 +117,10 @@ struct amd_cpudata {
>  	u32	nominal_freq;
>  	u32	lowest_nonlinear_freq;
>  
> +	struct amd_aperf_mperf cur;
> +	struct amd_aperf_mperf prev;
> +
> +	u64 freq;
>  	bool	boost_supported;
>  };
>  
> @@ -211,6 +230,39 @@ static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata,
>  					    max_perf, fast_switch);
>  }
>  
> +static inline bool amd_pstate_sample(struct amd_cpudata *cpudata)
> +{
> +	u64 aperf, mperf, tsc;
> +	unsigned long flags;
> +
> +	local_irq_save(flags);
> +	rdmsrl(MSR_IA32_APERF, aperf);
> +	rdmsrl(MSR_IA32_MPERF, mperf);
> +	tsc = rdtsc();
> +
> +	if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) {
> +		local_irq_restore(flags);
> +		return false;
> +	}
> +
> +	local_irq_restore(flags);
> +
> +	cpudata->cur.aperf = aperf;
> +	cpudata->cur.mperf = mperf;
> +	cpudata->cur.tsc =  tsc;
> +	cpudata->cur.aperf -= cpudata->prev.aperf;
> +	cpudata->cur.mperf -= cpudata->prev.mperf;
> +	cpudata->cur.tsc -= cpudata->prev.tsc;
> +
> +	cpudata->prev.aperf = aperf;
> +	cpudata->prev.mperf = mperf;
> +	cpudata->prev.tsc = tsc;
> +
> +	cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz), cpudata->cur.mperf);
> +
> +	return true;
> +}
> +
>  static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
>  			      u32 des_perf, u32 max_perf, bool fast_switch)
>  {
> @@ -226,8 +278,11 @@ static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
>  	value &= ~AMD_CPPC_MAX_PERF(~0L);
>  	value |= AMD_CPPC_MAX_PERF(max_perf);
>  
> -	trace_amd_pstate_perf(min_perf, des_perf, max_perf,
> -			      cpudata->cpu, (value != prev), fast_switch);
> +	if (trace_amd_pstate_perf_enabled() && amd_pstate_sample(cpudata)) {
> +		trace_amd_pstate_perf(min_perf, des_perf, max_perf, cpudata->freq,
> +			cpudata->cur.mperf, cpudata->cur.aperf, cpudata->cur.tsc,
> +				cpudata->cpu, (value != prev), fast_switch);

How about using struct amd_aperf_mperf pointer as one input:

trace_amd_pstate_perf(min_perf, des_perf, max_perf, &cpudata->cur, ...);

You can refer the members of struct amd_aperf_mperf in the
amd-pstate-trace.h:

	__entry->mperf = cur->mperf;
	__entry->aperf = cur->aperf;
	__entry->tsc = cur->tsc;

Thanks,
Ray

Re: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module

[Rafael J. Wysocki]

On Fri, Mar 4, 2022 at 7:42 AM Huang Rui <ray.huang@amd.com> wrote:
>
> On Fri, Mar 04, 2022 at 02:07:21PM +0800, Su, Jinzhou (Joe) wrote:
> > Add frequency, mperf, aperf and tsc in the trace. This can be used
> > to debug and tune the performance of AMD P-state driver.
> >
> > Use the time difference between amd_pstate_update to calculate CPU
> > frequency. There could be sleep in arch_freq_get_on_cpu, so do not
> > use it here.
> >
> > Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> > Co-developed-by: Huang Rui <ray.huang@amd.com>
> > Signed-off-by: Huang Rui <ray.huang@amd.com>
>
> Let's remove "Signed-off-by" of me, just leave "Co-developed-by".

Actually, they both need to be present (the C-d-b clarifies the S-o-b
meaning), so the above is correct.

>
> > ---
> >  drivers/cpufreq/amd-pstate-trace.h | 22 ++++++++++-
> >  drivers/cpufreq/amd-pstate.c       | 59 +++++++++++++++++++++++++++++-
> >  2 files changed, 78 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/cpufreq/amd-pstate-trace.h b/drivers/cpufreq/amd-pstate-trace.h
> > index 647505957d4f..35f38ae67fb1 100644
> > --- a/drivers/cpufreq/amd-pstate-trace.h
> > +++ b/drivers/cpufreq/amd-pstate-trace.h
> > @@ -27,6 +27,10 @@ TRACE_EVENT(amd_pstate_perf,
> >       TP_PROTO(unsigned long min_perf,
> >                unsigned long target_perf,
> >                unsigned long capacity,
> > +              u64 freq,
> > +              u64 mperf,
> > +              u64 aperf,
> > +              u64 tsc,
> >                unsigned int cpu_id,
> >                bool changed,
> >                bool fast_switch
> > @@ -35,6 +39,10 @@ TRACE_EVENT(amd_pstate_perf,
> >       TP_ARGS(min_perf,
> >               target_perf,
> >               capacity,
> > +             freq,
> > +             mperf,
> > +             aperf,
> > +             tsc,
> >               cpu_id,
> >               changed,
> >               fast_switch
> > @@ -44,6 +52,10 @@ TRACE_EVENT(amd_pstate_perf,
> >               __field(unsigned long, min_perf)
> >               __field(unsigned long, target_perf)
> >               __field(unsigned long, capacity)
> > +             __field(unsigned long long, freq)
> > +             __field(unsigned long long, mperf)
> > +             __field(unsigned long long, aperf)
> > +             __field(unsigned long long, tsc)
> >               __field(unsigned int, cpu_id)
> >               __field(bool, changed)
> >               __field(bool, fast_switch)
> > @@ -53,15 +65,23 @@ TRACE_EVENT(amd_pstate_perf,
> >               __entry->min_perf = min_perf;
> >               __entry->target_perf = target_perf;
> >               __entry->capacity = capacity;
> > +             __entry->freq = freq;
> > +             __entry->mperf = mperf;
> > +             __entry->aperf = aperf;
> > +             __entry->tsc = tsc;
> >               __entry->cpu_id = cpu_id;
> >               __entry->changed = changed;
> >               __entry->fast_switch = fast_switch;
> >               ),
> >
> > -     TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
> > +     TP_printk("amd_min_perf=%lu amd_des_perf=%lu amd_max_perf=%lu freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s fast_switch=%s",
> >                 (unsigned long)__entry->min_perf,
> >                 (unsigned long)__entry->target_perf,
> >                 (unsigned long)__entry->capacity,
> > +               (unsigned long long)__entry->freq,
> > +               (unsigned long long)__entry->mperf,
> > +               (unsigned long long)__entry->aperf,
> > +               (unsigned long long)__entry->tsc,
> >                 (unsigned int)__entry->cpu_id,
> >                 (__entry->changed) ? "true" : "false",
> >                 (__entry->fast_switch) ? "true" : "false"
> > diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> > index 9ce75ed11f8e..7be38bc6a673 100644
> > --- a/drivers/cpufreq/amd-pstate.c
> > +++ b/drivers/cpufreq/amd-pstate.c
> > @@ -65,6 +65,18 @@ MODULE_PARM_DESC(shared_mem,
> >
> >  static struct cpufreq_driver amd_pstate_driver;
> >
> > +/**
> > + * struct  amd_aperf_mperf
> > + * @aperf: actual performance frequency clock count
> > + * @mperf: maximum performance frequency clock count
> > + * @tsc:   time stamp counter
> > + */
> > +struct amd_aperf_mperf {
> > +     u64 aperf;
> > +     u64 mperf;
> > +     u64 tsc;
> > +};
> > +
> >  /**
> >   * struct amd_cpudata - private CPU data for AMD P-State
> >   * @cpu: CPU number
> > @@ -81,6 +93,9 @@ static struct cpufreq_driver amd_pstate_driver;
> >   * @min_freq: the frequency that mapped to lowest_perf
> >   * @nominal_freq: the frequency that mapped to nominal_perf
> >   * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
> > + * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
> > + * @prev: Last Aperf/Mperf/tsc count value read from register
> > + * @freq: current cpu frequency value
> >   * @boost_supported: check whether the Processor or SBIOS supports boost mode
> >   *
> >   * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
> > @@ -102,6 +117,10 @@ struct amd_cpudata {
> >       u32     nominal_freq;
> >       u32     lowest_nonlinear_freq;
> >
> > +     struct amd_aperf_mperf cur;
> > +     struct amd_aperf_mperf prev;
> > +
> > +     u64 freq;
> >       bool    boost_supported;
> >  };
> >
> > @@ -211,6 +230,39 @@ static inline void amd_pstate_update_perf(struct amd_cpudata *cpudata,
> >                                           max_perf, fast_switch);
> >  }
> >
> > +static inline bool amd_pstate_sample(struct amd_cpudata *cpudata)
> > +{
> > +     u64 aperf, mperf, tsc;
> > +     unsigned long flags;
> > +
> > +     local_irq_save(flags);
> > +     rdmsrl(MSR_IA32_APERF, aperf);
> > +     rdmsrl(MSR_IA32_MPERF, mperf);
> > +     tsc = rdtsc();
> > +
> > +     if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) {
> > +             local_irq_restore(flags);
> > +             return false;
> > +     }
> > +
> > +     local_irq_restore(flags);
> > +
> > +     cpudata->cur.aperf = aperf;
> > +     cpudata->cur.mperf = mperf;
> > +     cpudata->cur.tsc =  tsc;
> > +     cpudata->cur.aperf -= cpudata->prev.aperf;
> > +     cpudata->cur.mperf -= cpudata->prev.mperf;
> > +     cpudata->cur.tsc -= cpudata->prev.tsc;
> > +
> > +     cpudata->prev.aperf = aperf;
> > +     cpudata->prev.mperf = mperf;
> > +     cpudata->prev.tsc = tsc;
> > +
> > +     cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz), cpudata->cur.mperf);
> > +
> > +     return true;
> > +}
> > +
> >  static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
> >                             u32 des_perf, u32 max_perf, bool fast_switch)
> >  {
> > @@ -226,8 +278,11 @@ static void amd_pstate_update(struct amd_cpudata *cpudata, u32 min_perf,
> >       value &= ~AMD_CPPC_MAX_PERF(~0L);
> >       value |= AMD_CPPC_MAX_PERF(max_perf);
> >
> > -     trace_amd_pstate_perf(min_perf, des_perf, max_perf,
> > -                           cpudata->cpu, (value != prev), fast_switch);
> > +     if (trace_amd_pstate_perf_enabled() && amd_pstate_sample(cpudata)) {
> > +             trace_amd_pstate_perf(min_perf, des_perf, max_perf, cpudata->freq,
> > +                     cpudata->cur.mperf, cpudata->cur.aperf, cpudata->cur.tsc,
> > +                             cpudata->cpu, (value != prev), fast_switch);
>
> How about using struct amd_aperf_mperf pointer as one input:
>
> trace_amd_pstate_perf(min_perf, des_perf, max_perf, &cpudata->cur, ...);
>
> You can refer the members of struct amd_aperf_mperf in the
> amd-pstate-trace.h:
>
>         __entry->mperf = cur->mperf;
>         __entry->aperf = cur->aperf;
>         __entry->tsc = cur->tsc;
>
> Thanks,
> Ray

Re: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module

[Huang Rui]

On Sat, Mar 05, 2022 at 02:49:51AM +0800, Rafael J. Wysocki wrote:
> On Fri, Mar 4, 2022 at 7:42 AM Huang Rui <ray.huang@amd.com> wrote:
> >
> > On Fri, Mar 04, 2022 at 02:07:21PM +0800, Su, Jinzhou (Joe) wrote:
> > > Add frequency, mperf, aperf and tsc in the trace. This can be used
> > > to debug and tune the performance of AMD P-state driver.
> > >
> > > Use the time difference between amd_pstate_update to calculate CPU
> > > frequency. There could be sleep in arch_freq_get_on_cpu, so do not
> > > use it here.
> > >
> > > Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> > > Co-developed-by: Huang Rui <ray.huang@amd.com>
> > > Signed-off-by: Huang Rui <ray.huang@amd.com>
> >
> > Let's remove "Signed-off-by" of me, just leave "Co-developed-by".
> 
> Actually, they both need to be present (the C-d-b clarifies the S-o-b
> meaning), so the above is correct.
> 

OK, I see. Thanks to clarify this.

Best Regards,
Ray

RE: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module

[Su, Jinzhou (Joe)]

[AMD Official Use Only]

> -----Original Message-----
> From: Huang, Ray <Ray.Huang@amd.com>
> Sent: Friday, March 4, 2022 2:42 PM
> To: Su, Jinzhou (Joe) <Jinzhou.Su@amd.com>
> Cc: rjw@rjwysocki.net; linux-pm@vger.kernel.org;
> srinivas.pandruvada@linux.intel.com; dsmythies@telus.net;
> viresh.kumar@linaro.org; todd.e.brandt@linux.intel.com; linux-
> kernel@vger.kernel.org; Sharma, Deepak <Deepak.Sharma@amd.com>;
> Deucher, Alexander <Alexander.Deucher@amd.com>; Du, Xiaojian
> <Xiaojian.Du@amd.com>; Yuan, Perry <Perry.Yuan@amd.com>; Meng, Li
> (Jassmine) <Li.Meng@amd.com>
> Subject: Re: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for
> AMD P-State module
>
> On Fri, Mar 04, 2022 at 02:07:21PM +0800, Su, Jinzhou (Joe) wrote:
> > Add frequency, mperf, aperf and tsc in the trace. This can be used to
> > debug and tune the performance of AMD P-state driver.
> >
> > Use the time difference between amd_pstate_update to calculate CPU
> > frequency. There could be sleep in arch_freq_get_on_cpu, so do not use
> > it here.
> >
> > Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> > Co-developed-by: Huang Rui <ray.huang@amd.com>
> > Signed-off-by: Huang Rui <ray.huang@amd.com>
>
> Let's remove "Signed-off-by" of me, just leave "Co-developed-by".
>
> > ---
> >  drivers/cpufreq/amd-pstate-trace.h | 22 ++++++++++-
> >  drivers/cpufreq/amd-pstate.c       | 59 +++++++++++++++++++++++++++++-
> >  2 files changed, 78 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/cpufreq/amd-pstate-trace.h
> > b/drivers/cpufreq/amd-pstate-trace.h
> > index 647505957d4f..35f38ae67fb1 100644
> > --- a/drivers/cpufreq/amd-pstate-trace.h
> > +++ b/drivers/cpufreq/amd-pstate-trace.h
> > @@ -27,6 +27,10 @@ TRACE_EVENT(amd_pstate_perf,
> >     TP_PROTO(unsigned long min_perf,
> >              unsigned long target_perf,
> >              unsigned long capacity,
> > +            u64 freq,
> > +            u64 mperf,
> > +            u64 aperf,
> > +            u64 tsc,
> >              unsigned int cpu_id,
> >              bool changed,
> >              bool fast_switch
> > @@ -35,6 +39,10 @@ TRACE_EVENT(amd_pstate_perf,
> >     TP_ARGS(min_perf,
> >             target_perf,
> >             capacity,
> > +           freq,
> > +           mperf,
> > +           aperf,
> > +           tsc,
> >             cpu_id,
> >             changed,
> >             fast_switch
> > @@ -44,6 +52,10 @@ TRACE_EVENT(amd_pstate_perf,
> >             __field(unsigned long, min_perf)
> >             __field(unsigned long, target_perf)
> >             __field(unsigned long, capacity)
> > +           __field(unsigned long long, freq)
> > +           __field(unsigned long long, mperf)
> > +           __field(unsigned long long, aperf)
> > +           __field(unsigned long long, tsc)
> >             __field(unsigned int, cpu_id)
> >             __field(bool, changed)
> >             __field(bool, fast_switch)
> > @@ -53,15 +65,23 @@ TRACE_EVENT(amd_pstate_perf,
> >             __entry->min_perf = min_perf;
> >             __entry->target_perf = target_perf;
> >             __entry->capacity = capacity;
> > +           __entry->freq = freq;
> > +           __entry->mperf = mperf;
> > +           __entry->aperf = aperf;
> > +           __entry->tsc = tsc;
> >             __entry->cpu_id = cpu_id;
> >             __entry->changed = changed;
> >             __entry->fast_switch = fast_switch;
> >             ),
> >
> > -   TP_printk("amd_min_perf=%lu amd_des_perf=%lu
> amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
> > +   TP_printk("amd_min_perf=%lu amd_des_perf=%lu
> amd_max_perf=%lu
> > +freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s
> > +fast_switch=%s",
> >               (unsigned long)__entry->min_perf,
> >               (unsigned long)__entry->target_perf,
> >               (unsigned long)__entry->capacity,
> > +             (unsigned long long)__entry->freq,
> > +             (unsigned long long)__entry->mperf,
> > +             (unsigned long long)__entry->aperf,
> > +             (unsigned long long)__entry->tsc,
> >               (unsigned int)__entry->cpu_id,
> >               (__entry->changed) ? "true" : "false",
> >               (__entry->fast_switch) ? "true" : "false"
> > diff --git a/drivers/cpufreq/amd-pstate.c
> > b/drivers/cpufreq/amd-pstate.c index 9ce75ed11f8e..7be38bc6a673 100644
> > --- a/drivers/cpufreq/amd-pstate.c
> > +++ b/drivers/cpufreq/amd-pstate.c
> > @@ -65,6 +65,18 @@ MODULE_PARM_DESC(shared_mem,
> >
> >  static struct cpufreq_driver amd_pstate_driver;
> >
> > +/**
> > + * struct  amd_aperf_mperf
> > + * @aperf: actual performance frequency clock count
> > + * @mperf: maximum performance frequency clock count
> > + * @tsc:   time stamp counter
> > + */
> > +struct amd_aperf_mperf {
> > +   u64 aperf;
> > +   u64 mperf;
> > +   u64 tsc;
> > +};
> > +
> >  /**
> >   * struct amd_cpudata - private CPU data for AMD P-State
> >   * @cpu: CPU number
> > @@ -81,6 +93,9 @@ static struct cpufreq_driver amd_pstate_driver;
> >   * @min_freq: the frequency that mapped to lowest_perf
> >   * @nominal_freq: the frequency that mapped to nominal_perf
> >   * @lowest_nonlinear_freq: the frequency that mapped to
> > lowest_nonlinear_perf
> > + * @cur: Difference of Aperf/Mperf/tsc count between last and current
> > + sample
> > + * @prev: Last Aperf/Mperf/tsc count value read from register
> > + * @freq: current cpu frequency value
> >   * @boost_supported: check whether the Processor or SBIOS supports boost
> mode
> >   *
> >   * The amd_cpudata is key private data for each CPU thread in AMD
> > P-State, and @@ -102,6 +117,10 @@ struct amd_cpudata {
> >     u32     nominal_freq;
> >     u32     lowest_nonlinear_freq;
> >
> > +   struct amd_aperf_mperf cur;
> > +   struct amd_aperf_mperf prev;
> > +
> > +   u64 freq;
> >     bool    boost_supported;
> >  };
> >
> > @@ -211,6 +230,39 @@ static inline void amd_pstate_update_perf(struct
> amd_cpudata *cpudata,
> >                                         max_perf, fast_switch);
> >  }
> >
> > +static inline bool amd_pstate_sample(struct amd_cpudata *cpudata) {
> > +   u64 aperf, mperf, tsc;
> > +   unsigned long flags;
> > +
> > +   local_irq_save(flags);
> > +   rdmsrl(MSR_IA32_APERF, aperf);
> > +   rdmsrl(MSR_IA32_MPERF, mperf);
> > +   tsc = rdtsc();
> > +
> > +   if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) {
> > +           local_irq_restore(flags);
> > +           return false;
> > +   }
> > +
> > +   local_irq_restore(flags);
> > +
> > +   cpudata->cur.aperf = aperf;
> > +   cpudata->cur.mperf = mperf;
> > +   cpudata->cur.tsc =  tsc;
> > +   cpudata->cur.aperf -= cpudata->prev.aperf;
> > +   cpudata->cur.mperf -= cpudata->prev.mperf;
> > +   cpudata->cur.tsc -= cpudata->prev.tsc;
> > +
> > +   cpudata->prev.aperf = aperf;
> > +   cpudata->prev.mperf = mperf;
> > +   cpudata->prev.tsc = tsc;
> > +
> > +   cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz),
> > +cpudata->cur.mperf);
> > +
> > +   return true;
> > +}
> > +
> >  static void amd_pstate_update(struct amd_cpudata *cpudata, u32
> min_perf,
> >                           u32 des_perf, u32 max_perf, bool fast_switch)
> { @@ -226,8
> > +278,11 @@ static void amd_pstate_update(struct amd_cpudata *cpudata,
> u32 min_perf,
> >     value &= ~AMD_CPPC_MAX_PERF(~0L);
> >     value |= AMD_CPPC_MAX_PERF(max_perf);
> >
> > -   trace_amd_pstate_perf(min_perf, des_perf, max_perf,
> > -                         cpudata->cpu, (value != prev), fast_switch);
> > +   if (trace_amd_pstate_perf_enabled() &&
> amd_pstate_sample(cpudata)) {
> > +           trace_amd_pstate_perf(min_perf, des_perf, max_perf,
> cpudata->freq,
> > +                   cpudata->cur.mperf, cpudata->cur.aperf, cpudata-
> >cur.tsc,
> > +                           cpudata->cpu, (value != prev), fast_switch);
>
> How about using struct amd_aperf_mperf pointer as one input:
>
> trace_amd_pstate_perf(min_perf, des_perf, max_perf, &cpudata->cur, ...);
>
> You can refer the members of struct amd_aperf_mperf in the
> amd-pstate-trace.h:
>
>       __entry->mperf = cur->mperf;
>       __entry->aperf = cur->aperf;
>       __entry->tsc = cur->tsc;
>

I prefer the former way. We'd better to split the definition of struct "amd_cpudata" into head file and include it in the trace file with your change. Will do that in the future if needed.

> Thanks,
> Ray

Re: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for AMD P-State module

[Huang Rui]

On Wed, Mar 09, 2022 at 09:23:38AM +0800, Su, Jinzhou (Joe) wrote:
> [AMD Official Use Only]
> 
> > -----Original Message-----
> > From: Huang, Ray <Ray.Huang@amd.com>
> > Sent: Friday, March 4, 2022 2:42 PM
> > To: Su, Jinzhou (Joe) <Jinzhou.Su@amd.com>
> > Cc: rjw@rjwysocki.net; linux-pm@vger.kernel.org;
> > srinivas.pandruvada@linux.intel.com; dsmythies@telus.net;
> > viresh.kumar@linaro.org; todd.e.brandt@linux.intel.com; linux-
> > kernel@vger.kernel.org; Sharma, Deepak <Deepak.Sharma@amd.com>;
> > Deucher, Alexander <Alexander.Deucher@amd.com>; Du, Xiaojian
> > <Xiaojian.Du@amd.com>; Yuan, Perry <Perry.Yuan@amd.com>; Meng, Li
> > (Jassmine) <Li.Meng@amd.com>
> > Subject: Re: [PATCH V2 1/4] cpufreq: amd-pstate: Add more tracepoint for
> > AMD P-State module
> >
> > On Fri, Mar 04, 2022 at 02:07:21PM +0800, Su, Jinzhou (Joe) wrote:
> > > Add frequency, mperf, aperf and tsc in the trace. This can be used to
> > > debug and tune the performance of AMD P-state driver.
> > >
> > > Use the time difference between amd_pstate_update to calculate CPU
> > > frequency. There could be sleep in arch_freq_get_on_cpu, so do not use
> > > it here.
> > >
> > > Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> > > Co-developed-by: Huang Rui <ray.huang@amd.com>
> > > Signed-off-by: Huang Rui <ray.huang@amd.com>
> >
> > Let's remove "Signed-off-by" of me, just leave "Co-developed-by".
> >
> > > ---
> > >  drivers/cpufreq/amd-pstate-trace.h | 22 ++++++++++-
> > >  drivers/cpufreq/amd-pstate.c       | 59 +++++++++++++++++++++++++++++-
> > >  2 files changed, 78 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/cpufreq/amd-pstate-trace.h
> > > b/drivers/cpufreq/amd-pstate-trace.h
> > > index 647505957d4f..35f38ae67fb1 100644
> > > --- a/drivers/cpufreq/amd-pstate-trace.h
> > > +++ b/drivers/cpufreq/amd-pstate-trace.h
> > > @@ -27,6 +27,10 @@ TRACE_EVENT(amd_pstate_perf,
> > >     TP_PROTO(unsigned long min_perf,
> > >              unsigned long target_perf,
> > >              unsigned long capacity,
> > > +            u64 freq,
> > > +            u64 mperf,
> > > +            u64 aperf,
> > > +            u64 tsc,
> > >              unsigned int cpu_id,
> > >              bool changed,
> > >              bool fast_switch
> > > @@ -35,6 +39,10 @@ TRACE_EVENT(amd_pstate_perf,
> > >     TP_ARGS(min_perf,
> > >             target_perf,
> > >             capacity,
> > > +           freq,
> > > +           mperf,
> > > +           aperf,
> > > +           tsc,
> > >             cpu_id,
> > >             changed,
> > >             fast_switch
> > > @@ -44,6 +52,10 @@ TRACE_EVENT(amd_pstate_perf,
> > >             __field(unsigned long, min_perf)
> > >             __field(unsigned long, target_perf)
> > >             __field(unsigned long, capacity)
> > > +           __field(unsigned long long, freq)
> > > +           __field(unsigned long long, mperf)
> > > +           __field(unsigned long long, aperf)
> > > +           __field(unsigned long long, tsc)
> > >             __field(unsigned int, cpu_id)
> > >             __field(bool, changed)
> > >             __field(bool, fast_switch)
> > > @@ -53,15 +65,23 @@ TRACE_EVENT(amd_pstate_perf,
> > >             __entry->min_perf = min_perf;
> > >             __entry->target_perf = target_perf;
> > >             __entry->capacity = capacity;
> > > +           __entry->freq = freq;
> > > +           __entry->mperf = mperf;
> > > +           __entry->aperf = aperf;
> > > +           __entry->tsc = tsc;
> > >             __entry->cpu_id = cpu_id;
> > >             __entry->changed = changed;
> > >             __entry->fast_switch = fast_switch;
> > >             ),
> > >
> > > -   TP_printk("amd_min_perf=%lu amd_des_perf=%lu
> > amd_max_perf=%lu cpu_id=%u changed=%s fast_switch=%s",
> > > +   TP_printk("amd_min_perf=%lu amd_des_perf=%lu
> > amd_max_perf=%lu
> > > +freq=%llu mperf=%llu aperf=%llu tsc=%llu cpu_id=%u changed=%s
> > > +fast_switch=%s",
> > >               (unsigned long)__entry->min_perf,
> > >               (unsigned long)__entry->target_perf,
> > >               (unsigned long)__entry->capacity,
> > > +             (unsigned long long)__entry->freq,
> > > +             (unsigned long long)__entry->mperf,
> > > +             (unsigned long long)__entry->aperf,
> > > +             (unsigned long long)__entry->tsc,
> > >               (unsigned int)__entry->cpu_id,
> > >               (__entry->changed) ? "true" : "false",
> > >               (__entry->fast_switch) ? "true" : "false"
> > > diff --git a/drivers/cpufreq/amd-pstate.c
> > > b/drivers/cpufreq/amd-pstate.c index 9ce75ed11f8e..7be38bc6a673 100644
> > > --- a/drivers/cpufreq/amd-pstate.c
> > > +++ b/drivers/cpufreq/amd-pstate.c
> > > @@ -65,6 +65,18 @@ MODULE_PARM_DESC(shared_mem,
> > >
> > >  static struct cpufreq_driver amd_pstate_driver;
> > >
> > > +/**
> > > + * struct  amd_aperf_mperf
> > > + * @aperf: actual performance frequency clock count
> > > + * @mperf: maximum performance frequency clock count
> > > + * @tsc:   time stamp counter
> > > + */
> > > +struct amd_aperf_mperf {
> > > +   u64 aperf;
> > > +   u64 mperf;
> > > +   u64 tsc;
> > > +};
> > > +
> > >  /**
> > >   * struct amd_cpudata - private CPU data for AMD P-State
> > >   * @cpu: CPU number
> > > @@ -81,6 +93,9 @@ static struct cpufreq_driver amd_pstate_driver;
> > >   * @min_freq: the frequency that mapped to lowest_perf
> > >   * @nominal_freq: the frequency that mapped to nominal_perf
> > >   * @lowest_nonlinear_freq: the frequency that mapped to
> > > lowest_nonlinear_perf
> > > + * @cur: Difference of Aperf/Mperf/tsc count between last and current
> > > + sample
> > > + * @prev: Last Aperf/Mperf/tsc count value read from register
> > > + * @freq: current cpu frequency value
> > >   * @boost_supported: check whether the Processor or SBIOS supports boost
> > mode
> > >   *
> > >   * The amd_cpudata is key private data for each CPU thread in AMD
> > > P-State, and @@ -102,6 +117,10 @@ struct amd_cpudata {
> > >     u32     nominal_freq;
> > >     u32     lowest_nonlinear_freq;
> > >
> > > +   struct amd_aperf_mperf cur;
> > > +   struct amd_aperf_mperf prev;
> > > +
> > > +   u64 freq;
> > >     bool    boost_supported;
> > >  };
> > >
> > > @@ -211,6 +230,39 @@ static inline void amd_pstate_update_perf(struct
> > amd_cpudata *cpudata,
> > >                                         max_perf, fast_switch);
> > >  }
> > >
> > > +static inline bool amd_pstate_sample(struct amd_cpudata *cpudata) {
> > > +   u64 aperf, mperf, tsc;
> > > +   unsigned long flags;
> > > +
> > > +   local_irq_save(flags);
> > > +   rdmsrl(MSR_IA32_APERF, aperf);
> > > +   rdmsrl(MSR_IA32_MPERF, mperf);
> > > +   tsc = rdtsc();
> > > +
> > > +   if (cpudata->prev.mperf == mperf || cpudata->prev.tsc == tsc) {
> > > +           local_irq_restore(flags);
> > > +           return false;
> > > +   }
> > > +
> > > +   local_irq_restore(flags);
> > > +
> > > +   cpudata->cur.aperf = aperf;
> > > +   cpudata->cur.mperf = mperf;
> > > +   cpudata->cur.tsc =  tsc;
> > > +   cpudata->cur.aperf -= cpudata->prev.aperf;
> > > +   cpudata->cur.mperf -= cpudata->prev.mperf;
> > > +   cpudata->cur.tsc -= cpudata->prev.tsc;
> > > +
> > > +   cpudata->prev.aperf = aperf;
> > > +   cpudata->prev.mperf = mperf;
> > > +   cpudata->prev.tsc = tsc;
> > > +
> > > +   cpudata->freq = div64_u64((cpudata->cur.aperf * cpu_khz),
> > > +cpudata->cur.mperf);
> > > +
> > > +   return true;
> > > +}
> > > +
> > >  static void amd_pstate_update(struct amd_cpudata *cpudata, u32
> > min_perf,
> > >                           u32 des_perf, u32 max_perf, bool fast_switch)
> > { @@ -226,8
> > > +278,11 @@ static void amd_pstate_update(struct amd_cpudata *cpudata,
> > u32 min_perf,
> > >     value &= ~AMD_CPPC_MAX_PERF(~0L);
> > >     value |= AMD_CPPC_MAX_PERF(max_perf);
> > >
> > > -   trace_amd_pstate_perf(min_perf, des_perf, max_perf,
> > > -                         cpudata->cpu, (value != prev), fast_switch);
> > > +   if (trace_amd_pstate_perf_enabled() &&
> > amd_pstate_sample(cpudata)) {
> > > +           trace_amd_pstate_perf(min_perf, des_perf, max_perf,
> > cpudata->freq,
> > > +                   cpudata->cur.mperf, cpudata->cur.aperf, cpudata-
> > >cur.tsc,
> > > +                           cpudata->cpu, (value != prev), fast_switch);
> >
> > How about using struct amd_aperf_mperf pointer as one input:
> >
> > trace_amd_pstate_perf(min_perf, des_perf, max_perf, &cpudata->cur, ...);
> >
> > You can refer the members of struct amd_aperf_mperf in the
> > amd-pstate-trace.h:
> >
> >       __entry->mperf = cur->mperf;
> >       __entry->aperf = cur->aperf;
> >       __entry->tsc = cur->tsc;
> >
> 
> I prefer the former way. We'd better to split the definition of struct "amd_cpudata" into head file and include it in the trace file with your change. Will do that in the future if needed.
> 

Hmm, it should be ok. Because the trace implementation will be moved to
include/trace/events/power.h after the shared_mem is enabled.

Thanks,
Ray

[PATCH V2 2/4] tools/power/x86/intel_pstate_tracer: make tracer as a module

[Jinzhou Su]

Make intel_pstate_tracer as a module. Other trace event can import
this module to analyze their trace data.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
---
 .../intel_pstate_tracer.py                    | 260 +++++++++---------
 1 file changed, 129 insertions(+), 131 deletions(-)

diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
index e15e20696d17..b46e9eb8f5aa 100755
--- a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
+++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
@@ -63,7 +63,7 @@ C_USEC = 3
 C_SEC = 2
 C_CPU = 1
 
-global sample_num, last_sec_cpu, last_usec_cpu, start_time, testname
+global sample_num, last_sec_cpu, last_usec_cpu, start_time, testname, trace_file
 
 # 11 digits covers uptime to 115 days
 getcontext().prec = 11
@@ -72,17 +72,17 @@ sample_num =0
 last_sec_cpu = [0] * MAX_CPUS
 last_usec_cpu = [0] * MAX_CPUS
 
-def print_help():
-    print('intel_pstate_tracer.py:')
+def print_help(driver_name):
+    print('%s_tracer.py:'%driver_name)
     print('  Usage:')
     print('    If the trace file is available, then to simply parse and plot, use (sudo not required):')
-    print('      ./intel_pstate_tracer.py [-c cpus] -t <trace_file> -n <test_name>')
+    print('      ./%s_tracer.py [-c cpus] -t <trace_file> -n <test_name>'%driver_name)
     print('    Or')
-    print('      ./intel_pstate_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>')
+    print('      ./%s_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>'%driver_name)
     print('    To generate trace file, parse and plot, use (sudo required):')
-    print('      sudo ./intel_pstate_tracer.py [-c cpus] -i <interval> -n <test_name> -m <kbytes>')
+    print('      sudo ./%s_tracer.py [-c cpus] -i <interval> -n <test_name> -m <kbytes>'%driver_name)
     print('    Or')
-    print('      sudo ./intel_pstate_tracer.py [--cpu cpus] --interval <interval> --name <test_name> --memory <kbytes>')
+    print('      sudo ./%s_tracer.py [--cpu cpus] --interval <interval> --name <test_name> --memory <kbytes>'%driver_name)
     print('    Optional argument:')
     print('      cpus:   comma separated list of CPUs')
     print('      kbytes: Kilo bytes of memory per CPU to allocate to the trace buffer. Default: 10240')
@@ -323,7 +323,7 @@ def set_4_plot_linestyles(g_plot):
     g_plot('set style line 3 linetype 1 linecolor rgb "purple" pointtype -1')
     g_plot('set style line 4 linetype 1 linecolor rgb "blue" pointtype -1')
 
-def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz):
+def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz, cpu_mask):
     """ Store master csv file information """
 
     global graph_data_present
@@ -342,11 +342,9 @@ def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _t
 
     graph_data_present = True;
 
-def split_csv():
+def split_csv(current_max_cpu, cpu_mask):
     """ seperate the all csv file into per CPU csv files. """
 
-    global current_max_cpu
-
     if os.path.exists('cpu.csv'):
         for index in range(0, current_max_cpu + 1):
             if cpu_mask[int(index)] != 0:
@@ -381,27 +379,25 @@ def clear_trace_file():
         print('IO error clearing trace file ')
         sys.exit(2)
 
-def enable_trace():
+def enable_trace(trace_file):
     """ Enable trace """
 
     try:
-       open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable'
-                 , 'w').write("1")
+        open(trace_file,'w').write("1")
     except:
         print('IO error enabling trace ')
         sys.exit(2)
 
-def disable_trace():
+def disable_trace(trace_file):
     """ Disable trace """
 
     try:
-       open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable'
-                 , 'w').write("0")
+       open(trace_file, 'w').write("0")
     except:
         print('IO error disabling trace ')
         sys.exit(2)
 
-def set_trace_buffer_size():
+def set_trace_buffer_size(memory):
     """ Set trace buffer size """
 
     try:
@@ -421,7 +417,7 @@ def free_trace_buffer():
         print('IO error freeing trace buffer ')
         sys.exit(2)
 
-def read_trace_data(filename):
+def read_trace_data(filename, cpu_mask):
     """ Read and parse trace data """
 
     global current_max_cpu
@@ -481,135 +477,137 @@ def read_trace_data(filename):
                 tsc_ghz = Decimal(0)
                 if duration_ms != Decimal(0) :
                     tsc_ghz = Decimal(tsc)/duration_ms/Decimal(1000000)
-                store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz)
+                store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz, cpu_mask)
 
             if cpu_int > current_max_cpu:
                 current_max_cpu = cpu_int
 # End of for each trace line loop
 # Now seperate the main overall csv file into per CPU csv files.
-    split_csv()
+    split_csv(current_max_cpu, cpu_mask)
 
 def signal_handler(signal, frame):
     print(' SIGINT: Forcing cleanup before exit.')
     if interval:
-        disable_trace()
+        disable_trace(trace_file)
         clear_trace_file()
         # Free the memory
         free_trace_buffer()
         sys.exit(0)
 
-signal.signal(signal.SIGINT, signal_handler)
+if __name__ == "__main__":
+    trace_file = "/sys/kernel/debug/tracing/events/power/pstate_sample/enable"
+    signal.signal(signal.SIGINT, signal_handler)
 
-interval = ""
-filename = ""
-cpu_list = ""
-testname = ""
-memory = "10240"
-graph_data_present = False;
+    interval = ""
+    filename = ""
+    cpu_list = ""
+    testname = ""
+    memory = "10240"
+    graph_data_present = False;
 
-valid1 = False
-valid2 = False
+    valid1 = False
+    valid2 = False
 
-cpu_mask = zeros((MAX_CPUS,), dtype=int)
+    cpu_mask = zeros((MAX_CPUS,), dtype=int)
 
-try:
-    opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="])
-except getopt.GetoptError:
-    print_help()
-    sys.exit(2)
-for opt, arg in opts:
-    if opt == '-h':
-        print()
+    try:
+        opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="])
+    except getopt.GetoptError:
+        print_help('intel_pstate')
+        sys.exit(2)
+    for opt, arg in opts:
+        if opt == '-h':
+            print_help('intel_pstate')
+            sys.exit()
+        elif opt in ("-t", "--trace_file"):
+            valid1 = True
+            location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
+            filename = os.path.join(location, arg)
+        elif opt in ("-i", "--interval"):
+            valid1 = True
+            interval = arg
+        elif opt in ("-c", "--cpu"):
+            cpu_list = arg
+        elif opt in ("-n", "--name"):
+            valid2 = True
+            testname = arg
+        elif opt in ("-m", "--memory"):
+            memory = arg
+
+    if not (valid1 and valid2):
+        print_help('intel_pstate')
         sys.exit()
-    elif opt in ("-t", "--trace_file"):
-        valid1 = True
-        location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
-        filename = os.path.join(location, arg)
-    elif opt in ("-i", "--interval"):
-        valid1 = True
-        interval = arg
-    elif opt in ("-c", "--cpu"):
-        cpu_list = arg
-    elif opt in ("-n", "--name"):
-        valid2 = True
-        testname = arg
-    elif opt in ("-m", "--memory"):
-        memory = arg
-
-if not (valid1 and valid2):
-    print_help()
-    sys.exit()
-
-if cpu_list:
-    for p in re.split("[,]", cpu_list):
-        if int(p) < MAX_CPUS :
-            cpu_mask[int(p)] = 1
-else:
-    for i in range (0, MAX_CPUS):
-        cpu_mask[i] = 1
-
-if not os.path.exists('results'):
-    os.mkdir('results')
+
+    if cpu_list:
+        for p in re.split("[,]", cpu_list):
+            if int(p) < MAX_CPUS :
+                cpu_mask[int(p)] = 1
+    else:
+        for i in range (0, MAX_CPUS):
+            cpu_mask[i] = 1
+
+    if not os.path.exists('results'):
+        os.mkdir('results')
+        # The regular user needs to own the directory, not root.
+        fix_ownership('results')
+
+    os.chdir('results')
+    if os.path.exists(testname):
+        print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
+        sys.exit()
+    os.mkdir(testname)
     # The regular user needs to own the directory, not root.
-    fix_ownership('results')
-
-os.chdir('results')
-if os.path.exists(testname):
-    print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
-    sys.exit()
-os.mkdir(testname)
-# The regular user needs to own the directory, not root.
-fix_ownership(testname)
-os.chdir(testname)
-
-# Temporary (or perhaps not)
-cur_version = sys.version_info
-print('python version (should be >= 2.7):')
-print(cur_version)
-
-# Left as "cleanup" for potential future re-run ability.
-cleanup_data_files()
-
-if interval:
-    filename = "/sys/kernel/debug/tracing/trace"
-    clear_trace_file()
-    set_trace_buffer_size()
-    enable_trace()
-    print('Sleeping for ', interval, 'seconds')
-    time.sleep(int(interval))
-    disable_trace()
-
-current_max_cpu = 0
-
-read_trace_data(filename)
-
-if interval:
-    clear_trace_file()
-    # Free the memory
-    free_trace_buffer()
-
-if graph_data_present == False:
-    print('No valid data to plot')
-    sys.exit(2)
-
-for cpu_no in range(0, current_max_cpu + 1):
-    plot_perf_busy_with_sample(cpu_no)
-    plot_perf_busy(cpu_no)
-    plot_durations(cpu_no)
-    plot_loads(cpu_no)
-
-plot_pstate_cpu_with_sample()
-plot_pstate_cpu()
-plot_load_cpu()
-plot_frequency_cpu()
-plot_duration_cpu()
-plot_scaled_cpu()
-plot_boost_cpu()
-plot_ghz_cpu()
-
-# It is preferrable, but not necessary, that the regular user owns the files, not root.
-for root, dirs, files in os.walk('.'):
-    for f in files:
-        fix_ownership(f)
-
-os.chdir('../../')
+    fix_ownership(testname)
+    os.chdir(testname)
+
+    # Temporary (or perhaps not)
+    cur_version = sys.version_info
+    print('python version (should be >= 2.7):')
+    print(cur_version)
+
+    # Left as "cleanup" for potential future re-run ability.
+    cleanup_data_files()
+
+    if interval:
+        filename = "/sys/kernel/debug/tracing/trace"
+        clear_trace_file()
+        set_trace_buffer_size(memory)
+        enable_trace(trace_file)
+        print('Sleeping for ', interval, 'seconds')
+        time.sleep(int(interval))
+        disable_trace(trace_file)
+
+    current_max_cpu = 0
+
+    read_trace_data(filename, cpu_mask)
+
+    if interval:
+        clear_trace_file()
+        # Free the memory
+        free_trace_buffer()
+
+    if graph_data_present == False:
+        print('No valid data to plot')
+        sys.exit(2)
+
+    for cpu_no in range(0, current_max_cpu + 1):
+        plot_perf_busy_with_sample(cpu_no)
+        plot_perf_busy(cpu_no)
+        plot_durations(cpu_no)
+        plot_loads(cpu_no)
+
+    plot_pstate_cpu_with_sample()
+    plot_pstate_cpu()
+    plot_load_cpu()
+    plot_frequency_cpu()
+    plot_duration_cpu()
+    plot_scaled_cpu()
+    plot_boost_cpu()
+    plot_ghz_cpu()
+
+    # It is preferrable, but not necessary, that the regular user owns the files, not root.
+    for root, dirs, files in os.walk('.'):
+        for f in files:
+            fix_ownership(f)
+
+    os.chdir('../../')
-- 
2.27.0

Re: [PATCH V2 2/4] tools/power/x86/intel_pstate_tracer: make tracer as a module

[Huang Rui]

On Fri, Mar 04, 2022 at 02:07:22PM +0800, Su, Jinzhou (Joe) wrote:
> Make intel_pstate_tracer as a module. Other trace event can import
> this module to analyze their trace data.
> 
> Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> Acked-by: Doug Smythies <dsmythies@telus.net>

Reviewed-by: Huang Rui <ray.huang@amd.com>

> ---
>  .../intel_pstate_tracer.py                    | 260 +++++++++---------
>  1 file changed, 129 insertions(+), 131 deletions(-)
> 
> diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
> index e15e20696d17..b46e9eb8f5aa 100755
> --- a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
> +++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py
> @@ -63,7 +63,7 @@ C_USEC = 3
>  C_SEC = 2
>  C_CPU = 1
>  
> -global sample_num, last_sec_cpu, last_usec_cpu, start_time, testname
> +global sample_num, last_sec_cpu, last_usec_cpu, start_time, testname, trace_file
>  
>  # 11 digits covers uptime to 115 days
>  getcontext().prec = 11
> @@ -72,17 +72,17 @@ sample_num =0
>  last_sec_cpu = [0] * MAX_CPUS
>  last_usec_cpu = [0] * MAX_CPUS
>  
> -def print_help():
> -    print('intel_pstate_tracer.py:')
> +def print_help(driver_name):
> +    print('%s_tracer.py:'%driver_name)
>      print('  Usage:')
>      print('    If the trace file is available, then to simply parse and plot, use (sudo not required):')
> -    print('      ./intel_pstate_tracer.py [-c cpus] -t <trace_file> -n <test_name>')
> +    print('      ./%s_tracer.py [-c cpus] -t <trace_file> -n <test_name>'%driver_name)
>      print('    Or')
> -    print('      ./intel_pstate_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>')
> +    print('      ./%s_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>'%driver_name)
>      print('    To generate trace file, parse and plot, use (sudo required):')
> -    print('      sudo ./intel_pstate_tracer.py [-c cpus] -i <interval> -n <test_name> -m <kbytes>')
> +    print('      sudo ./%s_tracer.py [-c cpus] -i <interval> -n <test_name> -m <kbytes>'%driver_name)
>      print('    Or')
> -    print('      sudo ./intel_pstate_tracer.py [--cpu cpus] --interval <interval> --name <test_name> --memory <kbytes>')
> +    print('      sudo ./%s_tracer.py [--cpu cpus] --interval <interval> --name <test_name> --memory <kbytes>'%driver_name)
>      print('    Optional argument:')
>      print('      cpus:   comma separated list of CPUs')
>      print('      kbytes: Kilo bytes of memory per CPU to allocate to the trace buffer. Default: 10240')
> @@ -323,7 +323,7 @@ def set_4_plot_linestyles(g_plot):
>      g_plot('set style line 3 linetype 1 linecolor rgb "purple" pointtype -1')
>      g_plot('set style line 4 linetype 1 linecolor rgb "blue" pointtype -1')
>  
> -def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz):
> +def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz, cpu_mask):
>      """ Store master csv file information """
>  
>      global graph_data_present
> @@ -342,11 +342,9 @@ def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _t
>  
>      graph_data_present = True;
>  
> -def split_csv():
> +def split_csv(current_max_cpu, cpu_mask):
>      """ seperate the all csv file into per CPU csv files. """
>  
> -    global current_max_cpu
> -
>      if os.path.exists('cpu.csv'):
>          for index in range(0, current_max_cpu + 1):
>              if cpu_mask[int(index)] != 0:
> @@ -381,27 +379,25 @@ def clear_trace_file():
>          print('IO error clearing trace file ')
>          sys.exit(2)
>  
> -def enable_trace():
> +def enable_trace(trace_file):
>      """ Enable trace """
>  
>      try:
> -       open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable'
> -                 , 'w').write("1")
> +        open(trace_file,'w').write("1")
>      except:
>          print('IO error enabling trace ')
>          sys.exit(2)
>  
> -def disable_trace():
> +def disable_trace(trace_file):
>      """ Disable trace """
>  
>      try:
> -       open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable'
> -                 , 'w').write("0")
> +       open(trace_file, 'w').write("0")
>      except:
>          print('IO error disabling trace ')
>          sys.exit(2)
>  
> -def set_trace_buffer_size():
> +def set_trace_buffer_size(memory):
>      """ Set trace buffer size """
>  
>      try:
> @@ -421,7 +417,7 @@ def free_trace_buffer():
>          print('IO error freeing trace buffer ')
>          sys.exit(2)
>  
> -def read_trace_data(filename):
> +def read_trace_data(filename, cpu_mask):
>      """ Read and parse trace data """
>  
>      global current_max_cpu
> @@ -481,135 +477,137 @@ def read_trace_data(filename):
>                  tsc_ghz = Decimal(0)
>                  if duration_ms != Decimal(0) :
>                      tsc_ghz = Decimal(tsc)/duration_ms/Decimal(1000000)
> -                store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz)
> +                store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz, cpu_mask)
>  
>              if cpu_int > current_max_cpu:
>                  current_max_cpu = cpu_int
>  # End of for each trace line loop
>  # Now seperate the main overall csv file into per CPU csv files.
> -    split_csv()
> +    split_csv(current_max_cpu, cpu_mask)
>  
>  def signal_handler(signal, frame):
>      print(' SIGINT: Forcing cleanup before exit.')
>      if interval:
> -        disable_trace()
> +        disable_trace(trace_file)
>          clear_trace_file()
>          # Free the memory
>          free_trace_buffer()
>          sys.exit(0)
>  
> -signal.signal(signal.SIGINT, signal_handler)
> +if __name__ == "__main__":
> +    trace_file = "/sys/kernel/debug/tracing/events/power/pstate_sample/enable"
> +    signal.signal(signal.SIGINT, signal_handler)
>  
> -interval = ""
> -filename = ""
> -cpu_list = ""
> -testname = ""
> -memory = "10240"
> -graph_data_present = False;
> +    interval = ""
> +    filename = ""
> +    cpu_list = ""
> +    testname = ""
> +    memory = "10240"
> +    graph_data_present = False;
>  
> -valid1 = False
> -valid2 = False
> +    valid1 = False
> +    valid2 = False
>  
> -cpu_mask = zeros((MAX_CPUS,), dtype=int)
> +    cpu_mask = zeros((MAX_CPUS,), dtype=int)
>  
> -try:
> -    opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="])
> -except getopt.GetoptError:
> -    print_help()
> -    sys.exit(2)
> -for opt, arg in opts:
> -    if opt == '-h':
> -        print()
> +    try:
> +        opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="])
> +    except getopt.GetoptError:
> +        print_help('intel_pstate')
> +        sys.exit(2)
> +    for opt, arg in opts:
> +        if opt == '-h':
> +            print_help('intel_pstate')
> +            sys.exit()
> +        elif opt in ("-t", "--trace_file"):
> +            valid1 = True
> +            location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
> +            filename = os.path.join(location, arg)
> +        elif opt in ("-i", "--interval"):
> +            valid1 = True
> +            interval = arg
> +        elif opt in ("-c", "--cpu"):
> +            cpu_list = arg
> +        elif opt in ("-n", "--name"):
> +            valid2 = True
> +            testname = arg
> +        elif opt in ("-m", "--memory"):
> +            memory = arg
> +
> +    if not (valid1 and valid2):
> +        print_help('intel_pstate')
>          sys.exit()
> -    elif opt in ("-t", "--trace_file"):
> -        valid1 = True
> -        location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
> -        filename = os.path.join(location, arg)
> -    elif opt in ("-i", "--interval"):
> -        valid1 = True
> -        interval = arg
> -    elif opt in ("-c", "--cpu"):
> -        cpu_list = arg
> -    elif opt in ("-n", "--name"):
> -        valid2 = True
> -        testname = arg
> -    elif opt in ("-m", "--memory"):
> -        memory = arg
> -
> -if not (valid1 and valid2):
> -    print_help()
> -    sys.exit()
> -
> -if cpu_list:
> -    for p in re.split("[,]", cpu_list):
> -        if int(p) < MAX_CPUS :
> -            cpu_mask[int(p)] = 1
> -else:
> -    for i in range (0, MAX_CPUS):
> -        cpu_mask[i] = 1
> -
> -if not os.path.exists('results'):
> -    os.mkdir('results')
> +
> +    if cpu_list:
> +        for p in re.split("[,]", cpu_list):
> +            if int(p) < MAX_CPUS :
> +                cpu_mask[int(p)] = 1
> +    else:
> +        for i in range (0, MAX_CPUS):
> +            cpu_mask[i] = 1
> +
> +    if not os.path.exists('results'):
> +        os.mkdir('results')
> +        # The regular user needs to own the directory, not root.
> +        fix_ownership('results')
> +
> +    os.chdir('results')
> +    if os.path.exists(testname):
> +        print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
> +        sys.exit()
> +    os.mkdir(testname)
>      # The regular user needs to own the directory, not root.
> -    fix_ownership('results')
> -
> -os.chdir('results')
> -if os.path.exists(testname):
> -    print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
> -    sys.exit()
> -os.mkdir(testname)
> -# The regular user needs to own the directory, not root.
> -fix_ownership(testname)
> -os.chdir(testname)
> -
> -# Temporary (or perhaps not)
> -cur_version = sys.version_info
> -print('python version (should be >= 2.7):')
> -print(cur_version)
> -
> -# Left as "cleanup" for potential future re-run ability.
> -cleanup_data_files()
> -
> -if interval:
> -    filename = "/sys/kernel/debug/tracing/trace"
> -    clear_trace_file()
> -    set_trace_buffer_size()
> -    enable_trace()
> -    print('Sleeping for ', interval, 'seconds')
> -    time.sleep(int(interval))
> -    disable_trace()
> -
> -current_max_cpu = 0
> -
> -read_trace_data(filename)
> -
> -if interval:
> -    clear_trace_file()
> -    # Free the memory
> -    free_trace_buffer()
> -
> -if graph_data_present == False:
> -    print('No valid data to plot')
> -    sys.exit(2)
> -
> -for cpu_no in range(0, current_max_cpu + 1):
> -    plot_perf_busy_with_sample(cpu_no)
> -    plot_perf_busy(cpu_no)
> -    plot_durations(cpu_no)
> -    plot_loads(cpu_no)
> -
> -plot_pstate_cpu_with_sample()
> -plot_pstate_cpu()
> -plot_load_cpu()
> -plot_frequency_cpu()
> -plot_duration_cpu()
> -plot_scaled_cpu()
> -plot_boost_cpu()
> -plot_ghz_cpu()
> -
> -# It is preferrable, but not necessary, that the regular user owns the files, not root.
> -for root, dirs, files in os.walk('.'):
> -    for f in files:
> -        fix_ownership(f)
> -
> -os.chdir('../../')
> +    fix_ownership(testname)
> +    os.chdir(testname)
> +
> +    # Temporary (or perhaps not)
> +    cur_version = sys.version_info
> +    print('python version (should be >= 2.7):')
> +    print(cur_version)
> +
> +    # Left as "cleanup" for potential future re-run ability.
> +    cleanup_data_files()
> +
> +    if interval:
> +        filename = "/sys/kernel/debug/tracing/trace"
> +        clear_trace_file()
> +        set_trace_buffer_size(memory)
> +        enable_trace(trace_file)
> +        print('Sleeping for ', interval, 'seconds')
> +        time.sleep(int(interval))
> +        disable_trace(trace_file)
> +
> +    current_max_cpu = 0
> +
> +    read_trace_data(filename, cpu_mask)
> +
> +    if interval:
> +        clear_trace_file()
> +        # Free the memory
> +        free_trace_buffer()
> +
> +    if graph_data_present == False:
> +        print('No valid data to plot')
> +        sys.exit(2)
> +
> +    for cpu_no in range(0, current_max_cpu + 1):
> +        plot_perf_busy_with_sample(cpu_no)
> +        plot_perf_busy(cpu_no)
> +        plot_durations(cpu_no)
> +        plot_loads(cpu_no)
> +
> +    plot_pstate_cpu_with_sample()
> +    plot_pstate_cpu()
> +    plot_load_cpu()
> +    plot_frequency_cpu()
> +    plot_duration_cpu()
> +    plot_scaled_cpu()
> +    plot_boost_cpu()
> +    plot_ghz_cpu()
> +
> +    # It is preferrable, but not necessary, that the regular user owns the files, not root.
> +    for root, dirs, files in os.walk('.'):
> +        for f in files:
> +            fix_ownership(f)
> +
> +    os.chdir('../../')
> -- 
> 2.27.0
> 

[PATCH V2 3/4] tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state

[Jinzhou Su]

Intel P-state tracer is a useful tool to tune and debug Intel P-state
driver. AMD P-state tracer import intel pstate tracer. This tool can
be used to analyze the performance of AMD P-state tracer.

Now CPU frequency, load and desired perf can be traced.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
---
 MAINTAINERS                                   |   1 +
 .../x86/amd_pstate_tracer/amd_pstate_trace.py | 354 ++++++++++++++++++
 2 files changed, 355 insertions(+)
 create mode 100755 tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py

diff --git a/MAINTAINERS b/MAINTAINERS
index 4f9acc183cdc..01ac42504dcd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1002,6 +1002,7 @@ L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	Documentation/admin-guide/pm/amd-pstate.rst
 F:	drivers/cpufreq/amd-pstate*
+F:	tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
 
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
diff --git a/tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py b/tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
new file mode 100755
index 000000000000..2dea4032ac56
--- /dev/null
+++ b/tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
@@ -0,0 +1,354 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0-only
+# -*- coding: utf-8 -*-
+#
+""" This utility can be used to debug and tune the performance of the
+AMD P-State driver. It imports intel_pstate_tracer to analyze AMD P-State
+trace event.
+
+Prerequisites:
+    Python version 2.7.x or higher
+    gnuplot 5.0 or higher
+    gnuplot-py 1.8 or higher
+    (Most of the distributions have these required packages. They may be called
+     gnuplot-py, phython-gnuplot or phython3-gnuplot, gnuplot-nox, ... )
+
+    Kernel config for Linux trace is enabled
+
+    see print_help(): for Usage and Output details
+
+"""
+from __future__ import print_function
+from datetime import datetime
+import subprocess
+import os
+import time
+import re
+import signal
+import sys
+import getopt
+import Gnuplot
+from numpy import *
+from decimal import *
+sys.path.append('../intel_pstate_tracer')
+#import intel_pstate_tracer
+import intel_pstate_tracer as ipt
+
+__license__ = "GPL version 2"
+
+MAX_CPUS = 256
+# Define the csv file columns
+C_COMM = 15
+C_ELAPSED = 14
+C_SAMPLE = 13
+C_DURATION = 12
+C_LOAD = 11
+C_TSC = 10
+C_APERF = 9
+C_MPERF = 8
+C_FREQ = 7
+C_MAX_PERF = 6
+C_DES_PERF = 5
+C_MIN_PERF = 4
+C_USEC = 3
+C_SEC = 2
+C_CPU = 1
+
+global sample_num, last_sec_cpu, last_usec_cpu, start_time, test_name, trace_file
+
+getcontext().prec = 11
+
+sample_num =0
+last_sec_cpu = [0] * MAX_CPUS
+last_usec_cpu = [0] * MAX_CPUS
+
+def plot_per_cpu_freq(cpu_index):
+    """ Plot per cpu frequency """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_frequency.png" % cpu_index
+        g_plot = ipt.common_gnuplot_settings()
+        g_plot('set output "' + output_png + '"')
+        g_plot('set yrange [0:7]')
+        g_plot('set ytics 0, 1')
+        g_plot('set ylabel "CPU Frequency (GHz)"')
+        g_plot('set title "{} : frequency : CPU {:0>3} : {:%F %H:%M}"'.format(test_name, cpu_index, datetime.now()))
+        g_plot('set ylabel "CPU frequency"')
+        g_plot('set key off')
+        ipt.set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_FREQ))
+
+def plot_per_cpu_des_perf(cpu_index):
+    """ Plot per cpu desired perf """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_des_perf.png" % cpu_index
+        g_plot = ipt.common_gnuplot_settings()
+        g_plot('set output "' + output_png + '"')
+        g_plot('set yrange [0:255]')
+        g_plot('set ylabel "des perf"')
+        g_plot('set title "{} : cpu des perf : CPU {:0>3} : {:%F %H:%M}"'.format(test_name, cpu_index, datetime.now()))
+        g_plot('set key off')
+        ipt.set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_DES_PERF))
+
+def plot_per_cpu_load(cpu_index):
+    """ Plot per cpu load """
+
+    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
+    if os.path.exists(file_name):
+        output_png = "cpu%03d_load.png" % cpu_index
+        g_plot = ipt.common_gnuplot_settings()
+        g_plot('set output "' + output_png + '"')
+        g_plot('set yrange [0:100]')
+        g_plot('set ytics 0, 10')
+        g_plot('set ylabel "CPU load (percent)"')
+        g_plot('set title "{} : cpu load : CPU {:0>3} : {:%F %H:%M}"'.format(test_name, cpu_index, datetime.now()))
+        g_plot('set key off')
+        ipt.set_4_plot_linestyles(g_plot)
+        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_LOAD))
+
+def plot_all_cpu_frequency():
+    """ Plot all cpu frequencies """
+
+    output_png = 'all_cpu_frequencies.png'
+    g_plot = ipt.common_gnuplot_settings()
+    g_plot('set output "' + output_png + '"')
+    g_plot('set ylabel "CPU Frequency (GHz)"')
+    g_plot('set title "{} : cpu frequencies : {:%F %H:%M}"'.format(test_name, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_FREQ)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_all_cpu_des_perf():
+    """ Plot all cpu desired perf """
+
+    output_png = 'all_cpu_des_perf.png'
+    g_plot = ipt.common_gnuplot_settings()
+    g_plot('set output "' + output_png + '"')
+    g_plot('set ylabel "des perf"')
+    g_plot('set title "{} : cpu des perf : {:%F %H:%M}"'.format(test_name, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 255 ps 1 title i".format(C_ELAPSED, C_DES_PERF)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def plot_all_cpu_load():
+    """ Plot all cpu load  """
+
+    output_png = 'all_cpu_load.png'
+    g_plot = ipt.common_gnuplot_settings()
+    g_plot('set output "' + output_png + '"')
+    g_plot('set yrange [0:100]')
+    g_plot('set ylabel "CPU load (percent)"')
+    g_plot('set title "{} : cpu load : {:%F %H:%M}"'.format(test_name, datetime.now()))
+
+    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
+    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 255 ps 1 title i".format(C_ELAPSED, C_LOAD)
+    g_plot('title_list = "{}"'.format(title_list))
+    g_plot(plot_str)
+
+def store_csv(cpu_int, time_pre_dec, time_post_dec, min_perf, des_perf, max_perf, freq_ghz, mperf, aperf, tsc, common_comm, load, duration_ms, sample_num, elapsed_time, cpu_mask):
+    """ Store master csv file information """
+
+    global graph_data_present
+
+    if cpu_mask[cpu_int] == 0:
+        return
+
+    try:
+        f_handle = open('cpu.csv', 'a')
+        string_buffer = "CPU_%03u, %05u, %06u, %u, %u, %u, %.4f, %u, %u, %u, %.2f, %.3f, %u, %.3f, %s\n" % (cpu_int, int(time_pre_dec), int(time_post_dec), int(min_perf), int(des_perf), int(max_perf), freq_ghz, int(mperf), int(aperf), int(tsc), load, duration_ms, sample_num, elapsed_time, common_comm)
+        f_handle.write(string_buffer)
+        f_handle.close()
+    except:
+        print('IO error cpu.csv')
+        return
+
+    graph_data_present = True;
+
+
+def cleanup_data_files():
+    """ clean up existing data files """
+
+    if os.path.exists('cpu.csv'):
+        os.remove('cpu.csv')
+    f_handle = open('cpu.csv', 'a')
+    f_handle.write('common_cpu, common_secs, common_usecs, min_perf, des_perf, max_perf, freq, mperf, aperf, tsc, load, duration_ms, sample_num, elapsed_time, common_comm')
+    f_handle.write('\n')
+    f_handle.close()
+
+def read_trace_data(file_name, cpu_mask):
+    """ Read and parse trace data """
+
+    global current_max_cpu
+    global sample_num, last_sec_cpu, last_usec_cpu, start_time
+
+    try:
+        data = open(file_name, 'r').read()
+    except:
+        print('Error opening ', file_name)
+        sys.exit(2)
+
+    for line in data.splitlines():
+        search_obj = \
+            re.search(r'(^(.*?)\[)((\d+)[^\]])(.*?)(\d+)([.])(\d+)(.*?amd_min_perf=)(\d+)(.*?amd_des_perf=)(\d+)(.*?amd_max_perf=)(\d+)(.*?freq=)(\d+)(.*?mperf=)(\d+)(.*?aperf=)(\d+)(.*?tsc=)(\d+)'
+                      , line)
+
+        if search_obj:
+            cpu = search_obj.group(3)
+            cpu_int = int(cpu)
+            cpu = str(cpu_int)
+
+            time_pre_dec = search_obj.group(6)
+            time_post_dec = search_obj.group(8)
+            min_perf = search_obj.group(10)
+            des_perf = search_obj.group(12)
+            max_perf = search_obj.group(14)
+            freq = search_obj.group(16)
+            mperf = search_obj.group(18)
+            aperf = search_obj.group(20)
+            tsc = search_obj.group(22)
+
+            common_comm = search_obj.group(2).replace(' ', '')
+
+            if sample_num == 0 :
+                start_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000)
+            sample_num += 1
+
+            if last_sec_cpu[cpu_int] == 0 :
+                last_sec_cpu[cpu_int] = time_pre_dec
+                last_usec_cpu[cpu_int] = time_post_dec
+            else :
+                duration_us = (int(time_pre_dec) - int(last_sec_cpu[cpu_int])) * 1000000 + (int(time_post_dec) - int(last_usec_cpu[cpu_int]))
+                duration_ms = Decimal(duration_us) / Decimal(1000)
+                last_sec_cpu[cpu_int] = time_pre_dec
+                last_usec_cpu[cpu_int] = time_post_dec
+                elapsed_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000) - start_time
+                load = Decimal(int(mperf)*100)/ Decimal(tsc)
+                freq_ghz = Decimal(freq)/Decimal(1000000)
+                store_csv(cpu_int, time_pre_dec, time_post_dec, min_perf, des_perf, max_perf, freq_ghz, mperf, aperf, tsc, common_comm, load, duration_ms, sample_num, elapsed_time, cpu_mask)
+
+            if cpu_int > current_max_cpu:
+                current_max_cpu = cpu_int
+# Now separate the main overall csv file into per CPU csv files.
+    ipt.split_csv(current_max_cpu, cpu_mask)
+
+
+def signal_handler(signal, frame):
+    print(' SIGINT: Forcing cleanup before exit.')
+    if interval:
+        ipt.disable_trace(trace_file)
+        ipt.clear_trace_file()
+        ipt.free_trace_buffer()
+        sys.exit(0)
+
+trace_file = "/sys/kernel/debug/tracing/events/amd_cpu/enable"
+signal.signal(signal.SIGINT, signal_handler)
+
+interval = ""
+file_name = ""
+cpu_list = ""
+test_name = ""
+memory = "10240"
+graph_data_present = False;
+
+valid1 = False
+valid2 = False
+
+cpu_mask = zeros((MAX_CPUS,), dtype=int)
+
+
+try:
+    opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="])
+except getopt.GetoptError:
+    ipt.print_help('amd_pstate')
+    sys.exit(2)
+for opt, arg in opts:
+    if opt == '-h':
+        print()
+        sys.exit()
+    elif opt in ("-t", "--trace_file"):
+        valid1 = True
+        location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
+        file_name = os.path.join(location, arg)
+    elif opt in ("-i", "--interval"):
+        valid1 = True
+        interval = arg
+    elif opt in ("-c", "--cpu"):
+        cpu_list = arg
+    elif opt in ("-n", "--name"):
+        valid2 = True
+        test_name = arg
+    elif opt in ("-m", "--memory"):
+        memory = arg
+
+if not (valid1 and valid2):
+    ipt.print_help('amd_pstate')
+    sys.exit()
+
+if cpu_list:
+    for p in re.split("[,]", cpu_list):
+        if int(p) < MAX_CPUS :
+            cpu_mask[int(p)] = 1
+else:
+    for i in range (0, MAX_CPUS):
+        cpu_mask[i] = 1
+
+if not os.path.exists('results'):
+    os.mkdir('results')
+    ipt.fix_ownership('results')
+
+os.chdir('results')
+if os.path.exists(test_name):
+    print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
+    sys.exit()
+os.mkdir(test_name)
+ipt.fix_ownership(test_name)
+os.chdir(test_name)
+
+cur_version = sys.version_info
+print('python version (should be >= 2.7):')
+print(cur_version)
+
+cleanup_data_files()
+
+if interval:
+    file_name = "/sys/kernel/debug/tracing/trace"
+    ipt.clear_trace_file()
+    ipt.set_trace_buffer_size(memory)
+    ipt.enable_trace(trace_file)
+    time.sleep(int(interval))
+    ipt.disable_trace(trace_file)
+
+current_max_cpu = 0
+
+read_trace_data(file_name, cpu_mask)
+
+if interval:
+    ipt.clear_trace_file()
+    ipt.free_trace_buffer()
+
+if graph_data_present == False:
+    print('No valid data to plot')
+    sys.exit(2)
+
+for cpu_no in range(0, current_max_cpu + 1):
+    plot_per_cpu_freq(cpu_no)
+    plot_per_cpu_des_perf(cpu_no)
+    plot_per_cpu_load(cpu_no)
+
+plot_all_cpu_des_perf()
+plot_all_cpu_frequency()
+plot_all_cpu_load()
+
+for root, dirs, files in os.walk('.'):
+    for f in files:
+        ipt.fix_ownership(f)
+
+os.chdir('../../')
-- 
2.27.0

Re: [PATCH V2 3/4] tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state

[Huang Rui]

On Fri, Mar 04, 2022 at 02:07:23PM +0800, Su, Jinzhou (Joe) wrote:
> Intel P-state tracer is a useful tool to tune and debug Intel P-state
> driver. AMD P-state tracer import intel pstate tracer. This tool can
> be used to analyze the performance of AMD P-state tracer.
> 
> Now CPU frequency, load and desired perf can be traced.
> 
> Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>

Reviewed-by: Huang Rui <ray.huang@amd.com>

> ---
>  MAINTAINERS                                   |   1 +
>  .../x86/amd_pstate_tracer/amd_pstate_trace.py | 354 ++++++++++++++++++
>  2 files changed, 355 insertions(+)
>  create mode 100755 tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4f9acc183cdc..01ac42504dcd 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1002,6 +1002,7 @@ L:	linux-pm@vger.kernel.org
>  S:	Supported
>  F:	Documentation/admin-guide/pm/amd-pstate.rst
>  F:	drivers/cpufreq/amd-pstate*
> +F:	tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
>  
>  AMD PTDMA DRIVER
>  M:	Sanjay R Mehta <sanju.mehta@amd.com>
> diff --git a/tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py b/tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
> new file mode 100755
> index 000000000000..2dea4032ac56
> --- /dev/null
> +++ b/tools/power/x86/amd_pstate_tracer/amd_pstate_trace.py
> @@ -0,0 +1,354 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: GPL-2.0-only
> +# -*- coding: utf-8 -*-
> +#
> +""" This utility can be used to debug and tune the performance of the
> +AMD P-State driver. It imports intel_pstate_tracer to analyze AMD P-State
> +trace event.
> +
> +Prerequisites:
> +    Python version 2.7.x or higher
> +    gnuplot 5.0 or higher
> +    gnuplot-py 1.8 or higher
> +    (Most of the distributions have these required packages. They may be called
> +     gnuplot-py, phython-gnuplot or phython3-gnuplot, gnuplot-nox, ... )
> +
> +    Kernel config for Linux trace is enabled
> +
> +    see print_help(): for Usage and Output details
> +
> +"""
> +from __future__ import print_function
> +from datetime import datetime
> +import subprocess
> +import os
> +import time
> +import re
> +import signal
> +import sys
> +import getopt
> +import Gnuplot
> +from numpy import *
> +from decimal import *
> +sys.path.append('../intel_pstate_tracer')
> +#import intel_pstate_tracer
> +import intel_pstate_tracer as ipt
> +
> +__license__ = "GPL version 2"
> +
> +MAX_CPUS = 256
> +# Define the csv file columns
> +C_COMM = 15
> +C_ELAPSED = 14
> +C_SAMPLE = 13
> +C_DURATION = 12
> +C_LOAD = 11
> +C_TSC = 10
> +C_APERF = 9
> +C_MPERF = 8
> +C_FREQ = 7
> +C_MAX_PERF = 6
> +C_DES_PERF = 5
> +C_MIN_PERF = 4
> +C_USEC = 3
> +C_SEC = 2
> +C_CPU = 1
> +
> +global sample_num, last_sec_cpu, last_usec_cpu, start_time, test_name, trace_file
> +
> +getcontext().prec = 11
> +
> +sample_num =0
> +last_sec_cpu = [0] * MAX_CPUS
> +last_usec_cpu = [0] * MAX_CPUS
> +
> +def plot_per_cpu_freq(cpu_index):
> +    """ Plot per cpu frequency """
> +
> +    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
> +    if os.path.exists(file_name):
> +        output_png = "cpu%03d_frequency.png" % cpu_index
> +        g_plot = ipt.common_gnuplot_settings()
> +        g_plot('set output "' + output_png + '"')
> +        g_plot('set yrange [0:7]')
> +        g_plot('set ytics 0, 1')
> +        g_plot('set ylabel "CPU Frequency (GHz)"')
> +        g_plot('set title "{} : frequency : CPU {:0>3} : {:%F %H:%M}"'.format(test_name, cpu_index, datetime.now()))
> +        g_plot('set ylabel "CPU frequency"')
> +        g_plot('set key off')
> +        ipt.set_4_plot_linestyles(g_plot)
> +        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_FREQ))
> +
> +def plot_per_cpu_des_perf(cpu_index):
> +    """ Plot per cpu desired perf """
> +
> +    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
> +    if os.path.exists(file_name):
> +        output_png = "cpu%03d_des_perf.png" % cpu_index
> +        g_plot = ipt.common_gnuplot_settings()
> +        g_plot('set output "' + output_png + '"')
> +        g_plot('set yrange [0:255]')
> +        g_plot('set ylabel "des perf"')
> +        g_plot('set title "{} : cpu des perf : CPU {:0>3} : {:%F %H:%M}"'.format(test_name, cpu_index, datetime.now()))
> +        g_plot('set key off')
> +        ipt.set_4_plot_linestyles(g_plot)
> +        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_DES_PERF))
> +
> +def plot_per_cpu_load(cpu_index):
> +    """ Plot per cpu load """
> +
> +    file_name = 'cpu{:0>3}.csv'.format(cpu_index)
> +    if os.path.exists(file_name):
> +        output_png = "cpu%03d_load.png" % cpu_index
> +        g_plot = ipt.common_gnuplot_settings()
> +        g_plot('set output "' + output_png + '"')
> +        g_plot('set yrange [0:100]')
> +        g_plot('set ytics 0, 10')
> +        g_plot('set ylabel "CPU load (percent)"')
> +        g_plot('set title "{} : cpu load : CPU {:0>3} : {:%F %H:%M}"'.format(test_name, cpu_index, datetime.now()))
> +        g_plot('set key off')
> +        ipt.set_4_plot_linestyles(g_plot)
> +        g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_LOAD))
> +
> +def plot_all_cpu_frequency():
> +    """ Plot all cpu frequencies """
> +
> +    output_png = 'all_cpu_frequencies.png'
> +    g_plot = ipt.common_gnuplot_settings()
> +    g_plot('set output "' + output_png + '"')
> +    g_plot('set ylabel "CPU Frequency (GHz)"')
> +    g_plot('set title "{} : cpu frequencies : {:%F %H:%M}"'.format(test_name, datetime.now()))
> +
> +    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
> +    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_FREQ)
> +    g_plot('title_list = "{}"'.format(title_list))
> +    g_plot(plot_str)
> +
> +def plot_all_cpu_des_perf():
> +    """ Plot all cpu desired perf """
> +
> +    output_png = 'all_cpu_des_perf.png'
> +    g_plot = ipt.common_gnuplot_settings()
> +    g_plot('set output "' + output_png + '"')
> +    g_plot('set ylabel "des perf"')
> +    g_plot('set title "{} : cpu des perf : {:%F %H:%M}"'.format(test_name, datetime.now()))
> +
> +    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
> +    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 255 ps 1 title i".format(C_ELAPSED, C_DES_PERF)
> +    g_plot('title_list = "{}"'.format(title_list))
> +    g_plot(plot_str)
> +
> +def plot_all_cpu_load():
> +    """ Plot all cpu load  """
> +
> +    output_png = 'all_cpu_load.png'
> +    g_plot = ipt.common_gnuplot_settings()
> +    g_plot('set output "' + output_png + '"')
> +    g_plot('set yrange [0:100]')
> +    g_plot('set ylabel "CPU load (percent)"')
> +    g_plot('set title "{} : cpu load : {:%F %H:%M}"'.format(test_name, datetime.now()))
> +
> +    title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ')
> +    plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 255 ps 1 title i".format(C_ELAPSED, C_LOAD)
> +    g_plot('title_list = "{}"'.format(title_list))
> +    g_plot(plot_str)
> +
> +def store_csv(cpu_int, time_pre_dec, time_post_dec, min_perf, des_perf, max_perf, freq_ghz, mperf, aperf, tsc, common_comm, load, duration_ms, sample_num, elapsed_time, cpu_mask):
> +    """ Store master csv file information """
> +
> +    global graph_data_present
> +
> +    if cpu_mask[cpu_int] == 0:
> +        return
> +
> +    try:
> +        f_handle = open('cpu.csv', 'a')
> +        string_buffer = "CPU_%03u, %05u, %06u, %u, %u, %u, %.4f, %u, %u, %u, %.2f, %.3f, %u, %.3f, %s\n" % (cpu_int, int(time_pre_dec), int(time_post_dec), int(min_perf), int(des_perf), int(max_perf), freq_ghz, int(mperf), int(aperf), int(tsc), load, duration_ms, sample_num, elapsed_time, common_comm)
> +        f_handle.write(string_buffer)
> +        f_handle.close()
> +    except:
> +        print('IO error cpu.csv')
> +        return
> +
> +    graph_data_present = True;
> +
> +
> +def cleanup_data_files():
> +    """ clean up existing data files """
> +
> +    if os.path.exists('cpu.csv'):
> +        os.remove('cpu.csv')
> +    f_handle = open('cpu.csv', 'a')
> +    f_handle.write('common_cpu, common_secs, common_usecs, min_perf, des_perf, max_perf, freq, mperf, aperf, tsc, load, duration_ms, sample_num, elapsed_time, common_comm')
> +    f_handle.write('\n')
> +    f_handle.close()
> +
> +def read_trace_data(file_name, cpu_mask):
> +    """ Read and parse trace data """
> +
> +    global current_max_cpu
> +    global sample_num, last_sec_cpu, last_usec_cpu, start_time
> +
> +    try:
> +        data = open(file_name, 'r').read()
> +    except:
> +        print('Error opening ', file_name)
> +        sys.exit(2)
> +
> +    for line in data.splitlines():
> +        search_obj = \
> +            re.search(r'(^(.*?)\[)((\d+)[^\]])(.*?)(\d+)([.])(\d+)(.*?amd_min_perf=)(\d+)(.*?amd_des_perf=)(\d+)(.*?amd_max_perf=)(\d+)(.*?freq=)(\d+)(.*?mperf=)(\d+)(.*?aperf=)(\d+)(.*?tsc=)(\d+)'
> +                      , line)
> +
> +        if search_obj:
> +            cpu = search_obj.group(3)
> +            cpu_int = int(cpu)
> +            cpu = str(cpu_int)
> +
> +            time_pre_dec = search_obj.group(6)
> +            time_post_dec = search_obj.group(8)
> +            min_perf = search_obj.group(10)
> +            des_perf = search_obj.group(12)
> +            max_perf = search_obj.group(14)
> +            freq = search_obj.group(16)
> +            mperf = search_obj.group(18)
> +            aperf = search_obj.group(20)
> +            tsc = search_obj.group(22)
> +
> +            common_comm = search_obj.group(2).replace(' ', '')
> +
> +            if sample_num == 0 :
> +                start_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000)
> +            sample_num += 1
> +
> +            if last_sec_cpu[cpu_int] == 0 :
> +                last_sec_cpu[cpu_int] = time_pre_dec
> +                last_usec_cpu[cpu_int] = time_post_dec
> +            else :
> +                duration_us = (int(time_pre_dec) - int(last_sec_cpu[cpu_int])) * 1000000 + (int(time_post_dec) - int(last_usec_cpu[cpu_int]))
> +                duration_ms = Decimal(duration_us) / Decimal(1000)
> +                last_sec_cpu[cpu_int] = time_pre_dec
> +                last_usec_cpu[cpu_int] = time_post_dec
> +                elapsed_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000) - start_time
> +                load = Decimal(int(mperf)*100)/ Decimal(tsc)
> +                freq_ghz = Decimal(freq)/Decimal(1000000)
> +                store_csv(cpu_int, time_pre_dec, time_post_dec, min_perf, des_perf, max_perf, freq_ghz, mperf, aperf, tsc, common_comm, load, duration_ms, sample_num, elapsed_time, cpu_mask)
> +
> +            if cpu_int > current_max_cpu:
> +                current_max_cpu = cpu_int
> +# Now separate the main overall csv file into per CPU csv files.
> +    ipt.split_csv(current_max_cpu, cpu_mask)
> +
> +
> +def signal_handler(signal, frame):
> +    print(' SIGINT: Forcing cleanup before exit.')
> +    if interval:
> +        ipt.disable_trace(trace_file)
> +        ipt.clear_trace_file()
> +        ipt.free_trace_buffer()
> +        sys.exit(0)
> +
> +trace_file = "/sys/kernel/debug/tracing/events/amd_cpu/enable"
> +signal.signal(signal.SIGINT, signal_handler)
> +
> +interval = ""
> +file_name = ""
> +cpu_list = ""
> +test_name = ""
> +memory = "10240"
> +graph_data_present = False;
> +
> +valid1 = False
> +valid2 = False
> +
> +cpu_mask = zeros((MAX_CPUS,), dtype=int)
> +
> +
> +try:
> +    opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="])
> +except getopt.GetoptError:
> +    ipt.print_help('amd_pstate')
> +    sys.exit(2)
> +for opt, arg in opts:
> +    if opt == '-h':
> +        print()
> +        sys.exit()
> +    elif opt in ("-t", "--trace_file"):
> +        valid1 = True
> +        location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__)))
> +        file_name = os.path.join(location, arg)
> +    elif opt in ("-i", "--interval"):
> +        valid1 = True
> +        interval = arg
> +    elif opt in ("-c", "--cpu"):
> +        cpu_list = arg
> +    elif opt in ("-n", "--name"):
> +        valid2 = True
> +        test_name = arg
> +    elif opt in ("-m", "--memory"):
> +        memory = arg
> +
> +if not (valid1 and valid2):
> +    ipt.print_help('amd_pstate')
> +    sys.exit()
> +
> +if cpu_list:
> +    for p in re.split("[,]", cpu_list):
> +        if int(p) < MAX_CPUS :
> +            cpu_mask[int(p)] = 1
> +else:
> +    for i in range (0, MAX_CPUS):
> +        cpu_mask[i] = 1
> +
> +if not os.path.exists('results'):
> +    os.mkdir('results')
> +    ipt.fix_ownership('results')
> +
> +os.chdir('results')
> +if os.path.exists(test_name):
> +    print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.')
> +    sys.exit()
> +os.mkdir(test_name)
> +ipt.fix_ownership(test_name)
> +os.chdir(test_name)
> +
> +cur_version = sys.version_info
> +print('python version (should be >= 2.7):')
> +print(cur_version)
> +
> +cleanup_data_files()
> +
> +if interval:
> +    file_name = "/sys/kernel/debug/tracing/trace"
> +    ipt.clear_trace_file()
> +    ipt.set_trace_buffer_size(memory)
> +    ipt.enable_trace(trace_file)
> +    time.sleep(int(interval))
> +    ipt.disable_trace(trace_file)
> +
> +current_max_cpu = 0
> +
> +read_trace_data(file_name, cpu_mask)
> +
> +if interval:
> +    ipt.clear_trace_file()
> +    ipt.free_trace_buffer()
> +
> +if graph_data_present == False:
> +    print('No valid data to plot')
> +    sys.exit(2)
> +
> +for cpu_no in range(0, current_max_cpu + 1):
> +    plot_per_cpu_freq(cpu_no)
> +    plot_per_cpu_des_perf(cpu_no)
> +    plot_per_cpu_load(cpu_no)
> +
> +plot_all_cpu_des_perf()
> +plot_all_cpu_frequency()
> +plot_all_cpu_load()
> +
> +for root, dirs, files in os.walk('.'):
> +    for f in files:
> +        ipt.fix_ownership(f)
> +
> +os.chdir('../../')
> -- 
> 2.27.0
> 

[PATCH V2 4/4] Documentation: amd-pstate: add tracer tool introduction

[Jinzhou Su]

Add amd pstate tracer tool introduction

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
---
 Documentation/admin-guide/pm/amd-pstate.rst | 26 +++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 2f066df4ee9c..17dd7396e8fc 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -369,6 +369,32 @@ governor (for the policies it is attached to), or by the ``CPUFreq`` core (for t
 policies with other scaling governors).
 
 
+Tracer Tool
+-------------
+
+``amd_pstate_tracer.py`` can record and parse amd-pstate trace log, then
+generate performance plots. This utility can be used to debug and tune the
+performance of the amd-pstate driver. The tracer tool needs to import intel
+pstate tracer.
+
+Tracer tool located in linux/tools/power/x86/amd_pstate_tracer. It can be
+used in two ways. If trace file is available, then directly parse the file
+with command ::
+
+ ./amd_pstate_trace.py [-c cpus] -t <trace_file> -n <test_name>
+
+Or generate trace file with root privilege, then parse and plot with command ::
+
+ sudo ./amd_pstate_trace.py [-c cpus] -n <test_name> -i <interval> [-m kbytes]
+
+The test result can be found in ``results/test_name``. Following is the example
+about part of the output. ::
+
+ common_cpu  common_secs  common_usecs  min_perf  des_perf  max_perf  freq    mperf   apef    tsc       load   duration_ms  sample_num  elapsed_time  common_comm
+ CPU_005     712          116384        39        49        166       0.7565  9645075 2214891 38431470  25.1   11.646       469         2.496         kworker/5:0-40
+ CPU_006     712          116408        39        49        166       0.6769  8950227 1839034 37192089  24.06  11.272       470         2.496         kworker/6:0-1264
+
+
 Reference
 ===========
 
-- 
2.27.0

Re: [PATCH V2 4/4] Documentation: amd-pstate: add tracer tool introduction

[Huang Rui]

On Fri, Mar 04, 2022 at 02:07:24PM +0800, Su, Jinzhou (Joe) wrote:
> Add amd pstate tracer tool introduction
> 
> Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
> ---
>  Documentation/admin-guide/pm/amd-pstate.rst | 26 +++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
> index 2f066df4ee9c..17dd7396e8fc 100644
> --- a/Documentation/admin-guide/pm/amd-pstate.rst
> +++ b/Documentation/admin-guide/pm/amd-pstate.rst
> @@ -369,6 +369,32 @@ governor (for the policies it is attached to), or by the ``CPUFreq`` core (for t
>  policies with other scaling governors).
>  
>  
> +Tracer Tool
> +-------------
> +
> +``amd_pstate_tracer.py`` can record and parse amd-pstate trace log, then

amd-pstate -> ``amd-pstate``

> +generate performance plots. This utility can be used to debug and tune the
> +performance of the amd-pstate driver. The tracer tool needs to import intel

amd-pstate -> ``amd-pstate``

> +pstate tracer.
> +
> +Tracer tool located in linux/tools/power/x86/amd_pstate_tracer. It can be

linux/tools/power/x86/amd_pstate_tracer -> ``linux/tools/power/x86/amd_pstate_tracer``

> +used in two ways. If trace file is available, then directly parse the file
> +with command ::
> +
> + ./amd_pstate_trace.py [-c cpus] -t <trace_file> -n <test_name>
> +
> +Or generate trace file with root privilege, then parse and plot with command ::
> +
> + sudo ./amd_pstate_trace.py [-c cpus] -n <test_name> -i <interval> [-m kbytes]
> +
> +The test result can be found in ``results/test_name``. Following is the example
> +about part of the output. ::
> +
> + common_cpu  common_secs  common_usecs  min_perf  des_perf  max_perf  freq    mperf   apef    tsc       load   duration_ms  sample_num  elapsed_time  common_comm
> + CPU_005     712          116384        39        49        166       0.7565  9645075 2214891 38431470  25.1   11.646       469         2.496         kworker/5:0-40
> + CPU_006     712          116408        39        49        166       0.6769  8950227 1839034 37192089  24.06  11.272       470         2.496         kworker/6:0-1264
> +
> +
>  Reference
>  ===========
>  
> -- 
> 2.27.0
>