linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Subject: [net-next PATCH 3/4] drivers: net: dsa: qca8k: rework and simplify mdiobus logic
Date: Tue, 22 Mar 2022 02:45:05 +0100	[thread overview]
Message-ID: <20220322014506.27872-4-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220322014506.27872-1-ansuelsmth@gmail.com>

In an attempt to reduce qca8k_priv space, rework and simplify mdiobus
logic.
We now declare a mdiobus instead of relying on DSA phy_read/write even
if a mdio node is not present. This is all to make the qca8k ops static
and not switch specific. With a legacy implementation where port doesn't
have a phy map declared in the dts with a mdio node, we declare a
'qca8k-legacy' mdiobus. The conversion logic is used as legacy read and
write ops are used instead of the internal one.
While at it also improve the bus id to support multiple switch.
Also drop the legacy_phy_port_mapping as we now declare mdiobus with ops
that already address the workaround.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca8k.c | 101 ++++++++++++++--------------------------
 drivers/net/dsa/qca8k.h |   1 -
 2 files changed, 34 insertions(+), 68 deletions(-)

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 33cedae6875c..c837444d37f6 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1287,87 +1287,71 @@ qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
 	if (ret >= 0)
 		return ret;
 
-	return qca8k_mdio_read(priv, phy, regnum);
+	ret = qca8k_mdio_read(priv, phy, regnum);
+
+	if (ret < 0)
+		return 0xffff;
+
+	return ret;
 }
 
 static int
-qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data)
 {
-	struct qca8k_priv *priv = ds->priv;
-	int ret;
-
-	/* Check if the legacy mapping should be used and the
-	 * port is not correctly mapped to the right PHY in the
-	 * devicetree
-	 */
-	if (priv->legacy_phy_port_mapping)
-		port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-
-	/* Use mdio Ethernet when available, fallback to legacy one on error */
-	ret = qca8k_phy_eth_command(priv, false, port, regnum, 0);
-	if (!ret)
-		return ret;
+	port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
 
-	return qca8k_mdio_write(priv, port, regnum, data);
+	return qca8k_internal_mdio_write(slave_bus, port, regnum, data);
 }
 
 static int
-qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum)
 {
-	struct qca8k_priv *priv = ds->priv;
-	int ret;
-
-	/* Check if the legacy mapping should be used and the
-	 * port is not correctly mapped to the right PHY in the
-	 * devicetree
-	 */
-	if (priv->legacy_phy_port_mapping)
-		port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-
-	/* Use mdio Ethernet when available, fallback to legacy one on error */
-	ret = qca8k_phy_eth_command(priv, true, port, regnum, 0);
-	if (ret >= 0)
-		return ret;
-
-	ret = qca8k_mdio_read(priv, port, regnum);
-
-	if (ret < 0)
-		return 0xffff;
+	port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
 
-	return ret;
+	return qca8k_internal_mdio_read(slave_bus, port, regnum);
 }
 
 static int
-qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
+qca8k_mdio_register(struct qca8k_priv *priv)
 {
 	struct dsa_switch *ds = priv->ds;
+	struct device_node *mdio;
 	struct mii_bus *bus;
 
 	bus = devm_mdiobus_alloc(ds->dev);
-
 	if (!bus)
 		return -ENOMEM;
 
 	bus->priv = (void *)priv;
-	bus->name = "qca8k slave mii";
-	bus->read = qca8k_internal_mdio_read;
-	bus->write = qca8k_internal_mdio_write;
-	snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
-		 ds->index);
-
+	snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d",
+		 ds->dst->index, ds->index);
 	bus->parent = ds->dev;
 	bus->phy_mask = ~ds->phys_mii_mask;
-
 	ds->slave_mii_bus = bus;
 
-	return devm_of_mdiobus_register(priv->dev, bus, mdio);
+	/* Check if the devicetree declare the port:phy mapping */
+	mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
+	if (of_device_is_available(mdio)) {
+		bus->name = "qca8k slave mii";
+		bus->read = qca8k_internal_mdio_read;
+		bus->write = qca8k_internal_mdio_write;
+		return devm_of_mdiobus_register(priv->dev, bus, mdio);
+	}
+
+	/* If a mapping can't be found the legacy mapping is used,
+	 * using the qca8k_port_to_phy function
+	 */
+	bus->name = "qca8k-legacy slave mii";
+	bus->read = qca8k_legacy_mdio_read;
+	bus->write = qca8k_legacy_mdio_write;
+	return devm_mdiobus_register(priv->dev, bus);
 }
 
 static int
 qca8k_setup_mdio_bus(struct qca8k_priv *priv)
 {
 	u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
-	struct device_node *ports, *port, *mdio;
+	struct device_node *ports, *port;
 	phy_interface_t mode;
 	int err;
 
@@ -1429,24 +1413,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
 					 QCA8K_MDIO_MASTER_EN);
 	}
 
-	/* Check if the devicetree declare the port:phy mapping */
-	mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
-	if (of_device_is_available(mdio)) {
-		err = qca8k_mdio_register(priv, mdio);
-		if (err)
-			of_node_put(mdio);
-
-		return err;
-	}
-
-	/* If a mapping can't be found the legacy mapping is used,
-	 * using the qca8k_port_to_phy function
-	 */
-	priv->legacy_phy_port_mapping = true;
-	priv->ops.phy_read = qca8k_phy_read;
-	priv->ops.phy_write = qca8k_phy_write;
-
-	return 0;
+	return qca8k_mdio_register(priv);
 }
 
 static int
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 12d8d090298b..8bbe36f135b5 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -388,7 +388,6 @@ struct qca8k_priv {
 	 * Bit 1: port enabled. Bit 0: port disabled.
 	 */
 	u8 port_enabled_map;
-	bool legacy_phy_port_mapping;
 	struct qca8k_ports_config ports_config;
 	struct regmap *regmap;
 	struct mii_bus *bus;
-- 
2.34.1


  parent reply	other threads:[~2022-03-22  2:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-22  1:45 [net-next PATCH 0/4] Reduce qca8k_priv space usage Ansuel Smith
2022-03-22  1:45 ` [net-next PATCH 1/4] drivers: net: dsa: qca8k: drop MTU tracking from qca8k_priv Ansuel Smith
2022-03-22 11:58   ` Vladimir Oltean
2022-03-22 13:38     ` Ansuel Smith
2022-03-22 13:55       ` Vladimir Oltean
2022-03-22 14:03         ` Ansuel Smith
2022-03-24 10:45           ` Vladimir Oltean
2022-03-24 20:44             ` Ansuel Smith
2022-03-24 21:05               ` Vladimir Oltean
2022-03-24 23:10                 ` Ansuel Smith
2022-03-24 23:14                   ` Vladimir Oltean
2022-03-24 23:24                     ` Ansuel Smith
2022-03-22  1:45 ` [net-next PATCH 2/4] drivers: net: dsa: qca8k: drop port_sts " Ansuel Smith
2022-03-22  1:45 ` Ansuel Smith [this message]
2022-03-22  1:45 ` [net-next PATCH 4/4] drivers: net: dsa: qca8k: drop dsa_switch_ops " Ansuel Smith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220322014506.27872-4-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).