[PATCH v2 00/14] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support

[PATCH v2 00/14] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support

[Phil Edworthy]

Hello,

RZ/V2M has a dual-core Cortex-A53 (1.0 GHz) CPU and built-in AI
accelerator "DRP-AI" for vision, which is Renesas' original technology.
It also has a 32-bit LPDDR4 interface and video codec (H.264).

The RZ/V2M is used with ISP firmware that runs on one of the Cortex-A53
cores. The firmware is an integral part of the SoC such that the HW
User's Manual documents which of the peripheral modules are used by the
firmware.

Initial patches enables minimal peripherals on Renesas RZ/V2M EVK board
and booted via nfs. Ethernet is broadly compatible with the
etheravb-rcar-gen3 driver, but interrupts need some work so it's not
been included in this patch set.

Below blocks are enabled on Renesas RZ/V2M EVK board:
- memory
- External input clock
- CPG
- UART

Links for SoC and EVK:
[*] https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-cortex-a-mpus/rzv2m-dual-cortex-a53-lpddr4x32bit-ai-accelerator-isp-4k-video-codec-4k-camera-input-fhd-display-output


Sorry for cross posting the patches to multiple subsystems, as these are
just the dt-binding patches included as part of initial bringup patches.

v2:
 * Removed SYS dt-bindings patch and corresponding SoC identification
   as we only used the LSI version register. This can be dealt with
   later on.
 * Fixed em-uart dt-bindings.
 * Included reviewed-by tags.

Thanks
Phil

Re: [PATCH v2 00/14] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support

[Geert Uytterhoeven]

Hi Phil,

On Wed, Mar 30, 2022 at 5:40 PM Phil Edworthy <phil.edworthy@renesas.com> wrote:
> RZ/V2M has a dual-core Cortex-A53 (1.0 GHz) CPU and built-in AI
> accelerator "DRP-AI" for vision, which is Renesas' original technology.
> It also has a 32-bit LPDDR4 interface and video codec (H.264).
>
> The RZ/V2M is used with ISP firmware that runs on one of the Cortex-A53
> cores. The firmware is an integral part of the SoC such that the HW
> User's Manual documents which of the peripheral modules are used by the
> firmware.
>
> Initial patches enables minimal peripherals on Renesas RZ/V2M EVK board
> and booted via nfs. Ethernet is broadly compatible with the
> etheravb-rcar-gen3 driver, but interrupts need some work so it's not
> been included in this patch set.
>
> Below blocks are enabled on Renesas RZ/V2M EVK board:
> - memory
> - External input clock
> - CPG
> - UART

Thanks for your series!

> v2:
>  * Removed SYS dt-bindings patch and corresponding SoC identification
>    as we only used the LSI version register. This can be dealt with
>    later on.

That patch[1] also introduced the ARCH_R9A09G011 config symbol,
without which none of the new code in this series is built.

[1] [PATCH 07/14] soc: renesas: Identify RZ/V2M SoC
    https://lore.kernel.org/all/20220321154232.56315-8-phil.edworthy@renesas.com/

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

RE: [PATCH v2 00/14] Add new Renesas RZ/V2M SoC and Renesas RZ/V2M EVK support

[Phil Edworthy]

Hi Geert,

On 20 April 2022 21:11 Geert Uytterhoeven wrote:
> Hi Phil,
> 
> On Wed, Mar 30, 2022 at 5:40 PM Phil Edworthy <phil.edworthy@renesas.com>
> wrote:
> > RZ/V2M has a dual-core Cortex-A53 (1.0 GHz) CPU and built-in AI
> > accelerator "DRP-AI" for vision, which is Renesas' original technology.
> > It also has a 32-bit LPDDR4 interface and video codec (H.264).
> >
> > The RZ/V2M is used with ISP firmware that runs on one of the Cortex-A53
> > cores. The firmware is an integral part of the SoC such that the HW
> > User's Manual documents which of the peripheral modules are used by the
> > firmware.
> >
> > Initial patches enables minimal peripherals on Renesas RZ/V2M EVK board
> > and booted via nfs. Ethernet is broadly compatible with the
> > etheravb-rcar-gen3 driver, but interrupts need some work so it's not
> > been included in this patch set.
> >
> > Below blocks are enabled on Renesas RZ/V2M EVK board:
> > - memory
> > - External input clock
> > - CPG
> > - UART
> 
> Thanks for your series!
> 
> > v2:
> >  * Removed SYS dt-bindings patch and corresponding SoC identification
> >    as we only used the LSI version register. This can be dealt with
> >    later on.
> 
> That patch[1] also introduced the ARCH_R9A09G011 config symbol,
> without which none of the new code in this series is built.
> 
> [1] [PATCH 07/14] soc: renesas: Identify RZ/V2M SoC
> 
> https://lore.kernel.org/all/20220321154232.56315-8-phil.edworthy@renesas.com/

Ah, right. I should have said that I replaced that patch with
"[PATCH v2 06/13] soc: renesas: Add RZ/V2M (R9A09G011) config option".
However, looking back I managed to send that patch only to myself.
Doh!

Thanks
Phil


> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-
> m68k.org
> 
> In personal conversations with technical people, I call myself a hacker.
> But
> when I'm talking to journalists I just say "programmer" or something like
> that.
>                                 -- Linus Torvalds