From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH v6 00/16] Support external boost at CS35l41 ASoC driver
Date: Sat, 9 Apr 2022 10:12:59 +0100 [thread overview]
Message-ID: <20220409091315.1663410-1-tanureal@opensource.cirrus.com> (raw)
Move the support for CS35L41 external boost to its shared library
for ASoC use.
This move resulted in cs35l41_hda_reg_sequence being removed,
and its steps were broken down into regmap writes or functions
from the library. And hardware configuration struct was unified
for its use in the shared lib.
While at it, some minor bugs were found and fixed it.
v6 changelog:
- Rebased on top of Linux Next with community patches for CS35L41
- Document patch acked by Charles Keepax
v5 changelog:
- Fixed wrong indentation at Documentation patch
- Use of consistent prefix
v4 changelog:
- Separated GPIO 1 and 2 function enums
v3 changelog:
- Remove patches already accepted
- Improved logic in documentation patch
- Documentation patch goes before its code
- Fixed missing Signed-off-by
- Fixed subject for HDA patches
v2 changelog:
- Instead of removing the log, playback actions will log the last regmap access.
- Documentation patch with the correct subject line and fixed bug reported by Rob Herring on the
provided example.
Previous versions:
v1: https://lkml.org/lkml/2022/3/3/759
v2: https://lkml.org/lkml/2022/3/4/743
v3: https://lkml.org/lkml/2022/3/8/975
v4: https://lkml.org/lkml/2022/3/17/267
v5: https://lkml.org/lkml/2022/3/22/696
David Rhodes (1):
ASoC: cs35l41: Document CS35l41 External Boost
Lucas Tanure (15):
ALSA: cs35l41: Unify hardware configuration
ALSA: cs35l41: Check hw_config before using it
ALSA: cs35l41: Move cs35l41_gpio_config to shared lib
ALSA: hda: cs35l41: Fix I2S params comments
ALSA: hda: cs35l41: Always configure the DAI
ALSA: hda: cs35l41: Add Boost type flag
ALSA: hda: cs35l41: Put the device into safe mode for external boost
ALSA: hda: cs35l41: Mute the device before shutdown
ALSA: cs35l41: Enable Internal Boost in shared lib
ALSA: hda: cs35l41: Move boost config to initialization code
ALSA: hda: cs35l41: Remove cs35l41_hda_reg_sequence struct
ALSA: hda: cs35l41: Reorganize log for playback actions
ALSA: hda: cs35l41: Handle all external boost setups the same way
ALSA: hda: cs35l41: Move external boost handling to lib for ASoC use
ASoC: cs35l41: Support external boost
.../bindings/sound/cirrus,cs35l41.yaml | 44 ++-
include/sound/cs35l41.h | 59 +++-
sound/pci/hda/cs35l41_hda.c | 295 ++++++------------
sound/pci/hda/cs35l41_hda.h | 27 +-
sound/soc/codecs/cs35l41-i2c.c | 4 +-
sound/soc/codecs/cs35l41-lib.c | 190 ++++++++++-
sound/soc/codecs/cs35l41-spi.c | 4 +-
sound/soc/codecs/cs35l41.c | 166 +++++-----
sound/soc/codecs/cs35l41.h | 5 +-
9 files changed, 443 insertions(+), 351 deletions(-)
--
2.35.1
next reply other threads:[~2022-04-09 9:14 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-09 9:12 Lucas Tanure [this message]
2022-04-09 9:13 ` [PATCH v6 01/16] ALSA: cs35l41: Unify hardware configuration Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 02/16] ALSA: cs35l41: Check hw_config before using it Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 03/16] ALSA: cs35l41: Move cs35l41_gpio_config to shared lib Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 04/16] ALSA: hda: cs35l41: Fix I2S params comments Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 05/16] ALSA: hda: cs35l41: Always configure the DAI Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 06/16] ALSA: hda: cs35l41: Add Boost type flag Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 07/16] ALSA: hda: cs35l41: Put the device into safe mode for external boost Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 08/16] ALSA: hda: cs35l41: Mute the device before shutdown Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 09/16] ALSA: cs35l41: Enable Internal Boost in shared lib Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 10/16] ALSA: hda: cs35l41: Move boost config to initialization code Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 11/16] ALSA: hda: cs35l41: Remove cs35l41_hda_reg_sequence struct Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 12/16] ALSA: hda: cs35l41: Reorganize log for playback actions Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 13/16] ALSA: hda: cs35l41: Handle all external boost setups the same way Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 14/16] ALSA: hda: cs35l41: Move external boost handling to lib for ASoC use Lucas Tanure
2022-04-09 9:13 ` [PATCH v6 15/16] ASoC: cs35l41: Document CS35l41 External Boost Lucas Tanure
2022-04-12 14:44 ` Mark Brown
2022-04-09 9:13 ` [PATCH v6 16/16] ASoC: cs35l41: Support external boost Lucas Tanure
2022-04-12 14:54 ` Mark Brown
2022-04-12 10:40 ` [PATCH v6 00/16] Support external boost at CS35l41 ASoC driver Takashi Iwai
2022-04-13 7:51 ` Takashi Iwai
2022-04-13 8:10 ` tanureal
2022-04-13 8:12 ` Takashi Iwai
2022-04-13 8:21 ` Takashi Iwai
2022-04-13 8:22 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220409091315.1663410-1-tanureal@opensource.cirrus.com \
--to=tanureal@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).