[PATCH AUTOSEL 4.19 01/12] drm/amd: Add USBC connector ID

[PATCH AUTOSEL 4.19 01/12] drm/amd: Add USBC connector ID

[Sasha Levin]

From: Aurabindo Pillai <aurabindo.pillai@amd.com>

[ Upstream commit c5c948aa894a831f96fccd025e47186b1ee41615 ]

[Why&How] Add a dedicated AMDGPU specific ID for use with
newer ASICs that support USB-C output

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/ObjectID.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/ObjectID.h b/drivers/gpu/drm/amd/amdgpu/ObjectID.h
index 5b393622f592..a0f0a17e224f 100644
--- a/drivers/gpu/drm/amd/amdgpu/ObjectID.h
+++ b/drivers/gpu/drm/amd/amdgpu/ObjectID.h
@@ -119,6 +119,7 @@
 #define CONNECTOR_OBJECT_ID_eDP                   0x14
 #define CONNECTOR_OBJECT_ID_MXM                   0x15
 #define CONNECTOR_OBJECT_ID_LVDS_eDP              0x16
+#define CONNECTOR_OBJECT_ID_USBC                  0x17
 
 /* deleted */
 
-- 
2.35.1

[PATCH AUTOSEL 4.19 02/12] drm/amdkfd: Check for potential null return of kmalloc_array()

[Sasha Levin]

From: QintaoShen <unSimple1993@163.com>

[ Upstream commit ebbb7bb9e80305820dc2328a371c1b35679f2667 ]

As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference.
Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.

Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_events.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_events.c b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
index e9f0e0a1b41c..892077377339 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_events.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_events.c
@@ -532,6 +532,8 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events)
 	event_waiters = kmalloc_array(num_events,
 					sizeof(struct kfd_event_waiter),
 					GFP_KERNEL);
+	if (!event_waiters)
+		return NULL;
 
 	for (i = 0; (event_waiters) && (i < num_events) ; i++) {
 		init_wait(&event_waiters[i].wait);
-- 
2.35.1

[PATCH AUTOSEL 4.19 03/12] Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer

[Sasha Levin]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit b6cae15b5710c8097aad26a2e5e752c323ee5348 ]

When reading a packet from a host-to-guest ring buffer, there is no
memory barrier between reading the write index (to see if there is
a packet to read) and reading the contents of the packet. The Hyper-V
host uses store-release when updating the write index to ensure that
writes of the packet data are completed first. On the guest side,
the processor can reorder and read the packet data before the write
index, and sometimes get stale packet data. Getting such stale packet
data has been observed in a reproducible case in a VM on ARM64.

Fix this by using virt_load_acquire() to read the write index,
ensuring that reads of the packet data cannot be reordered
before it. Preventing such reordering is logically correct, and
with this change, getting stale data can no longer be reproduced.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/ring_buffer.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c
index 6cb45f256107..d97b30af9e03 100644
--- a/drivers/hv/ring_buffer.c
+++ b/drivers/hv/ring_buffer.c
@@ -365,7 +365,16 @@ int hv_ringbuffer_read(struct vmbus_channel *channel,
 static u32 hv_pkt_iter_avail(const struct hv_ring_buffer_info *rbi)
 {
 	u32 priv_read_loc = rbi->priv_read_index;
-	u32 write_loc = READ_ONCE(rbi->ring_buffer->write_index);
+	u32 write_loc;
+
+	/*
+	 * The Hyper-V host writes the packet data, then uses
+	 * store_release() to update the write_index.  Use load_acquire()
+	 * here to prevent loads of the packet data from being re-ordered
+	 * before the read of the write_index and potentially getting
+	 * stale data.
+	 */
+	write_loc = virt_load_acquire(&rbi->ring_buffer->write_index);
 
 	if (write_loc >= priv_read_loc)
 		return write_loc - priv_read_loc;
-- 
2.35.1

[PATCH AUTOSEL 4.19 04/12] scsi: target: tcmu: Fix possible page UAF

[Sasha Levin]

From: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

[ Upstream commit a6968f7a367f128d120447360734344d5a3d5336 ]

tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not
take refcount properly and just returns page pointer. When
tcmu_try_get_data_page() returns, the returned page may have been freed by
tcmu_blocks_release().

We need to get_page() under cmdr_lock to avoid concurrent
tcmu_blocks_release().

Link: https://lore.kernel.org/r/20220311132206.24515-1-xiaoguang.wang@linux.alibaba.com
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_user.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index dd7307375504..f29d600357f3 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -1499,6 +1499,7 @@ static struct page *tcmu_try_get_block_page(struct tcmu_dev *udev, uint32_t dbi)
 	mutex_lock(&udev->cmdr_lock);
 	page = tcmu_get_block_page(udev, dbi);
 	if (likely(page)) {
+		get_page(page);
 		mutex_unlock(&udev->cmdr_lock);
 		return page;
 	}
@@ -1537,6 +1538,7 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf)
 		/* For the vmalloc()ed cmd area pages */
 		addr = (void *)(unsigned long)info->mem[mi].addr + offset;
 		page = vmalloc_to_page(addr);
+		get_page(page);
 	} else {
 		uint32_t dbi;
 
@@ -1547,7 +1549,6 @@ static vm_fault_t tcmu_vma_fault(struct vm_fault *vmf)
 			return VM_FAULT_SIGBUS;
 	}
 
-	get_page(page);
 	vmf->page = page;
 	return 0;
 }
-- 
2.35.1

[PATCH AUTOSEL 4.19 05/12] scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024

[Sasha Levin]

From: Tyrel Datwyler <tyreld@linux.ibm.com>

[ Upstream commit 0bade8e53279157c7cc9dd95d573b7e82223d78a ]

The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is
currently an arbitrary value of 800. Increase this value to 1024 which
better matches the characteristics of the typical IBMi Initiator that
supports 32 LUNs and a queue depth of 32.

This change also has the secondary benefit of being a power of two as
required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert
"kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each
target has been rounded down to 512 when attempting to kfifo_init() those
pools with the current request_limit size of 800.

Link: https://lore.kernel.org/r/20220322194443.678433-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
index f42a619198c4..79bc6c3bfa6e 100644
--- a/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
+++ b/drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c
@@ -44,7 +44,7 @@
 
 #define IBMVSCSIS_VERSION	"v0.2"
 
-#define	INITIAL_SRP_LIMIT	800
+#define	INITIAL_SRP_LIMIT	1024
 #define	DEFAULT_MAX_SECTORS	256
 #define MAX_TXU			1024 * 1024
 
-- 
2.35.1

[PATCH AUTOSEL 4.19 06/12] net: micrel: fix KS8851_MLL Kconfig

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ]

KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL,
so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since
'select' does not follow any dependency chains.

Fixes kconfig warning and build errors:

WARNING: unmet direct dependencies detected for MICREL_PHY
  Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
  Selected by [y]:
  - KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]

ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig
index b7e2f49696b7..aa12bace8673 100644
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
@@ -45,6 +45,7 @@ config KS8851
 config KS8851_MLL
 	tristate "Micrel KS8851 MLL"
 	depends on HAS_IOMEM
+	depends on PTP_1588_CLOCK_OPTIONAL
 	select MII
 	---help---
 	  This platform driver is for Micrel KS8851 Address/data bus
-- 
2.35.1

[PATCH AUTOSEL 4.19 07/12] ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs

[Sasha Levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit 5399752299396a3c9df6617f4b3c907d7aa4ded8 ]

Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with
the a message: "READ LOG DMA EXT failed, trying PIO" during boot.

Initially this was discovered because it caused a crash
with the sata_dwc_460ex controller on a WD MyBook Live DUO.

The reporter "Tice Rex" which has the unique opportunity that he
has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q"
which booted fine and didn't expose "READ LOG DMA EXT". But the
newer/latest firmware "EXT0DB6Q" caused the headaches.

BugLink: https://github.com/openwrt/openwrt/issues/9505
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 33d3728f3622..0c10d9557754 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4598,6 +4598,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*MX100*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 840 EVO*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_NO_DMA_LOG |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 840*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
-- 
2.35.1

[PATCH AUTOSEL 4.19 08/12] gpu: ipu-v3: Fix dev_dbg frequency output

[Sasha Levin]

From: Leo Ruan <tingquan.ruan@cn.bosch.com>

[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ]

This commit corrects the printing of the IPU clock error percentage if
it is between -0.1% to -0.9%. For example, if the pixel clock requested
is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%.
But the fixed point math had a flaw and calculated error of 0.2%.

Before:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error 0.2%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

After:
  Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz
  IPU clock can give 27000000 with divider 10, error -0.8%
  Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz

Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/ipu-v3/ipu-di.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/ipu-v3/ipu-di.c b/drivers/gpu/ipu-v3/ipu-di.c
index d2f1bd9d3deb..c498dc7d8838 100644
--- a/drivers/gpu/ipu-v3/ipu-di.c
+++ b/drivers/gpu/ipu-v3/ipu-di.c
@@ -460,8 +460,9 @@ static void ipu_di_config_clock(struct ipu_di *di,
 
 		error = rate / (sig->mode.pixelclock / 1000);
 
-		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %d.%u%%\n",
-			rate, div, (signed)(error - 1000) / 10, error % 10);
+		dev_dbg(di->ipu->dev, "  IPU clock can give %lu with divider %u, error %c%d.%d%%\n",
+			rate, div, error < 1000 ? '-' : '+',
+			abs(error - 1000) / 10, abs(error - 1000) % 10);
 
 		/* Allow a 1% error */
 		if (error < 1010 && error >= 990) {
-- 
2.35.1

[PATCH AUTOSEL 4.19 09/12] arm64: alternatives: mark patch_alternative() as `noinstr`

[Sasha Levin]

From: Joey Gouly <joey.gouly@arm.com>

[ Upstream commit a2c0b0fbe01419f8f5d1c0b9c581631f34ffce8b ]

The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.

Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().

Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[    0.241121] CPU: All CPU(s) started at EL2

The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.

The following fragment is using LL/SC atomics in the .text section:
  | <__tsan_unaligned_read4+304>:     ldxr    x6, [x2]
  | <__tsan_unaligned_read4+308>:     add     x6, x6, x5
  | <__tsan_unaligned_read4+312>:     stxr    w7, x6, [x2]
  | <__tsan_unaligned_read4+316>:     cbnz    w7, <__tsan_unaligned_read4+304>

This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
  | <__tsan_unaligned_read4+304>:     ldadd   x5, x6, [x2]
  | <__tsan_unaligned_read4+308>:     add     x6, x6, x5
  | <__tsan_unaligned_read4+312>:     stxr    w7, x6, [x2]
  | <__tsan_unaligned_read4+316>:     cbnz    w7, <__tsan_unaligned_read4+304>

This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/alternative.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index 0d345622bbba..3747c8d87bdb 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -42,7 +42,7 @@ struct alt_region {
 /*
  * Check if the target PC is within an alternative block.
  */
-static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
+static __always_inline bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 {
 	unsigned long replptr = (unsigned long)ALT_REPL_PTR(alt);
 	return !(pc >= replptr && pc <= (replptr + alt->alt_len));
@@ -50,7 +50,7 @@ static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 
 #define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))
 
-static u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
+static __always_inline u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnptr)
 {
 	u32 insn;
 
@@ -95,7 +95,7 @@ static u32 get_alt_insn(struct alt_instr *alt, __le32 *insnptr, __le32 *altinsnp
 	return insn;
 }
 
-static void patch_alternative(struct alt_instr *alt,
+static noinstr void patch_alternative(struct alt_instr *alt,
 			      __le32 *origptr, __le32 *updptr, int nr_inst)
 {
 	__le32 *replptr;
-- 
2.35.1

[PATCH AUTOSEL 4.19 10/12] drm/amd/display: Fix allocate_mst_payload assert on resume

[Sasha Levin]

From: Roman Li <Roman.Li@amd.com>

[ Upstream commit f4346fb3edf7720db3f7f5e1cab1f667cd024280 ]

[Why]
On resume we do link detection for all non-MST connectors.
MST is handled separately. However the condition for telling
if connector is on mst branch is not enough for mst hub case.
Link detection for mst branch link leads to mst topology reset.
That causes assert in dc_link_allocate_mst_payload()

[How]
Use link type as indicator for mst link.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index ed02bb6b2cd0..1d1183c47beb 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -777,7 +777,8 @@ static int dm_resume(void *handle)
 		 * this is the case when traversing through already created
 		 * MST connectors, should be skipped
 		 */
-		if (aconnector->mst_port)
+		if (aconnector->dc_link &&
+		    aconnector->dc_link->type == dc_connection_mst_branch)
 			continue;
 
 		mutex_lock(&aconnector->hpd_lock);
-- 
2.35.1

[PATCH AUTOSEL 4.19 11/12] scsi: mvsas: Add PCI ID of RocketRaid 2640

[Sasha Levin]

From: Alexey Galakhov <agalakhov@gmail.com>

[ Upstream commit 5f2bce1e222028dc1c15f130109a17aa654ae6e8 ]

The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell
chip. The chip in question was already supported by the kernel, just the
PCI ID of this particular board was missing.

Link: https://lore.kernel.org/r/20220309212535.402987-1-agalakhov@gmail.com
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mvsas/mv_init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
index 98d6608068ab..d47b4dcfb1e5 100644
--- a/drivers/scsi/mvsas/mv_init.c
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -678,6 +678,7 @@ static struct pci_device_id mvs_pci_table[] = {
 	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
 	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
 	{ PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 },
+	{ PCI_VDEVICE(TTI, 0x2640), chip_6440 },
 	{ PCI_VDEVICE(TTI, 0x2710), chip_9480 },
 	{ PCI_VDEVICE(TTI, 0x2720), chip_9480 },
 	{ PCI_VDEVICE(TTI, 0x2721), chip_9480 },
-- 
2.35.1

[PATCH AUTOSEL 4.19 12/12] drivers: net: slip: fix NPD bug in sl_tx_timeout()

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ]

When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.

   (Thread 1)                 |      (Thread 2)
                              | slip_close()
                              |   spin_lock_bh(&sl->lock)
                              |   ...
...                           |   sl->tty = NULL //(1)
sl_tx_timeout()               |   spin_unlock_bh(&sl->lock)
  spin_lock(&sl->lock);       |
  ...                         |   ...
  tty_chars_in_buffer(sl->tty)|
    if (tty->ops->..) //(2)   |
    ...                       |   synchronize_rcu()

We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).

This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.

Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/slip/slip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index 5d864f812955..3ec8d16a4633 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -471,7 +471,7 @@ static void sl_tx_timeout(struct net_device *dev)
 	spin_lock(&sl->lock);
 
 	if (netif_queue_stopped(dev)) {
-		if (!netif_running(dev))
+		if (!netif_running(dev) || !sl->tty)
 			goto out;
 
 		/* May be we must check transmitter timeout here ?
-- 
2.35.1