linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: robert.jarzmik@free.fr, linux-arm-kernel@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>, Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Philipp Zabel <philipp.zabel@gmail.com>,
	Lubomir Rintel <lkundrak@v3.sk>,
	Paul Parsons <lost.distance@yahoo.com>,
	Tomas Cech <sleep_walker@suse.com>,
	Sergey Lapin <slapin@ossfans.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Helge Deller <deller@gmx.de>, Mark Brown <broonie@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-ide@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-input@vger.kernel.org,
	patches@opensource.cirrus.com, linux-leds@vger.kernel.org,
	linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org,
	linux-rtc@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	alsa-devel@alsa-project.org
Subject: [PATCH 21/48] ARM: pxa: eseries: use gpio lookup for audio
Date: Tue, 19 Apr 2022 18:37:43 +0200	[thread overview]
Message-ID: <20220419163810.2118169-22-arnd@kernel.org> (raw)
In-Reply-To: <20220419163810.2118169-1-arnd@kernel.org>

From: Arnd Bergmann <arnd@arndb.de>

The three eseries machines have very similar drivers for audio, all
using the mach/eseries-gpio.h header for finding the gpio numbers.

Change these to use gpio descriptors to avoid the header file
dependency.

I convert the _OFF gpio numbers into GPIO_ACTIVE_LOW ones for
consistency here.

Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-pxa/eseries.c | 32 ++++++++++++++++++++++++++++++++
 sound/soc/pxa/e740_wm9705.c | 35 ++++++++++++++++++-----------------
 sound/soc/pxa/e750_wm9705.c | 31 ++++++++++++++-----------------
 sound/soc/pxa/e800_wm9712.c | 31 ++++++++++++++-----------------
 4 files changed, 78 insertions(+), 51 deletions(-)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index a8b6483ff665..2643a2a72408 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -24,6 +24,7 @@
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/memblock.h>
+#include <linux/gpio/machine.h>
 
 #include <video/w100fb.h>
 
@@ -520,6 +521,16 @@ static struct platform_device e740_audio_device = {
 	.id		= -1,
 };
 
+static struct gpiod_lookup_table e740_audio_gpio_table = {
+	.dev_id = "e740-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_WM9705_nAVDD2, "Audio power",  GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_AMP_ON, "Output amp",  GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /* ----------------------------------------------------------------------- */
 
 static struct platform_device *e740_devices[] __initdata = {
@@ -540,6 +551,7 @@ static void __init e740_init(void)
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&e740_audio_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -716,6 +728,15 @@ static struct platform_device e750_tc6393xb_device = {
 	.resource      = eseries_tmio_resources,
 };
 
+static struct gpiod_lookup_table e750_audio_gpio_table = {
+	.dev_id = "e750-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device e750_audio_device = {
 	.name		= "e750-audio",
 	.id		= -1,
@@ -740,6 +761,7 @@ static void __init e750_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&e750_audio_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -935,6 +957,15 @@ static struct platform_device e800_tc6393xb_device = {
 	.resource      = eseries_tmio_resources,
 };
 
+static struct gpiod_lookup_table e800_audio_gpio_table = {
+	.dev_id = "e800-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct platform_device e800_audio_device = {
 	.name		= "e800-audio",
 	.id		= -1,
@@ -959,6 +990,7 @@ static void __init e800_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
+	gpiod_add_lookup_table(&e800_audio_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
 	pxa_set_ac97_info(NULL);
 }
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c
index f922be7e0016..4e0e9b778d4c 100644
--- a/sound/soc/pxa/e740_wm9705.c
+++ b/sound/soc/pxa/e740_wm9705.c
@@ -7,17 +7,19 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
 
 #include <linux/platform_data/asoc-pxa.h>
-#include <mach/eseries-gpio.h>
 
 #include <asm/mach-types.h>
 
+static struct gpio_desc *gpiod_output_amp, *gpiod_input_amp;
+static struct gpio_desc *gpiod_audio_power;
+
 #define E740_AUDIO_OUT 1
 #define E740_AUDIO_IN  2
 
@@ -25,9 +27,9 @@ static int e740_audio_power;
 
 static void e740_sync_audio_power(int status)
 {
-	gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status);
-	gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0);
-	gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0);
+	gpiod_set_value(gpiod_audio_power, !status);
+	gpiod_set_value(gpiod_output_amp, (status & E740_AUDIO_OUT) ? 1 : 0);
+	gpiod_set_value(gpiod_input_amp, (status & E740_AUDIO_IN) ? 1 : 0);
 }
 
 static int e740_mic_amp_event(struct snd_soc_dapm_widget *w,
@@ -116,36 +118,35 @@ static struct snd_soc_card e740 = {
 	.fully_routed = true,
 };
 
-static struct gpio e740_audio_gpios[] = {
-	{ GPIO_E740_MIC_ON, GPIOF_OUT_INIT_LOW, "Mic amp" },
-	{ GPIO_E740_AMP_ON, GPIOF_OUT_INIT_LOW, "Output amp" },
-	{ GPIO_E740_WM9705_nAVDD2, GPIOF_OUT_INIT_HIGH, "Audio power" },
-};
-
 static int e740_probe(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = &e740;
 	int ret;
 
-	ret = gpio_request_array(e740_audio_gpios,
-				 ARRAY_SIZE(e740_audio_gpios));
+	gpiod_input_amp  = devm_gpiod_get(&pdev->dev, "Mic amp", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(gpiod_input_amp);
+	if (ret)
+		return ret;
+	gpiod_output_amp  = devm_gpiod_get(&pdev->dev, "Output amp", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(gpiod_output_amp);
+	if (ret)
+		return ret;
+	gpiod_audio_power = devm_gpiod_get(&pdev->dev, "Audio power", GPIOD_OUT_HIGH);
+	ret = PTR_ERR_OR_ZERO(gpiod_audio_power);
 	if (ret)
 		return ret;
 
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret) {
+	if (ret)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
-		gpio_free_array(e740_audio_gpios, ARRAY_SIZE(e740_audio_gpios));
-	}
 	return ret;
 }
 
 static int e740_remove(struct platform_device *pdev)
 {
-	gpio_free_array(e740_audio_gpios, ARRAY_SIZE(e740_audio_gpios));
 	return 0;
 }
 
diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c
index 308828cd736b..7a1e0d8bfd11 100644
--- a/sound/soc/pxa/e750_wm9705.c
+++ b/sound/soc/pxa/e750_wm9705.c
@@ -7,24 +7,25 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
 
 #include <linux/platform_data/asoc-pxa.h>
-#include <mach/eseries-gpio.h>
 
 #include <asm/mach-types.h>
 
+static struct gpio_desc *gpiod_spk_amp, *gpiod_hp_amp;
+
 static int e750_spk_amp_event(struct snd_soc_dapm_widget *w,
 				struct snd_kcontrol *kcontrol, int event)
 {
 	if (event & SND_SOC_DAPM_PRE_PMU)
-		gpio_set_value(GPIO_E750_SPK_AMP_OFF, 0);
+		gpiod_set_value(gpiod_spk_amp, 1);
 	else if (event & SND_SOC_DAPM_POST_PMD)
-		gpio_set_value(GPIO_E750_SPK_AMP_OFF, 1);
+		gpiod_set_value(gpiod_spk_amp, 0);
 
 	return 0;
 }
@@ -33,9 +34,9 @@ static int e750_hp_amp_event(struct snd_soc_dapm_widget *w,
 				struct snd_kcontrol *kcontrol, int event)
 {
 	if (event & SND_SOC_DAPM_PRE_PMU)
-		gpio_set_value(GPIO_E750_HP_AMP_OFF, 0);
+		gpiod_set_value(gpiod_hp_amp, 1);
 	else if (event & SND_SOC_DAPM_POST_PMD)
-		gpio_set_value(GPIO_E750_HP_AMP_OFF, 1);
+		gpiod_set_value(gpiod_hp_amp, 0);
 
 	return 0;
 }
@@ -100,35 +101,31 @@ static struct snd_soc_card e750 = {
 	.fully_routed = true,
 };
 
-static struct gpio e750_audio_gpios[] = {
-	{ GPIO_E750_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Headphone amp" },
-	{ GPIO_E750_SPK_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
-};
-
 static int e750_probe(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = &e750;
 	int ret;
 
-	ret = gpio_request_array(e750_audio_gpios,
-				 ARRAY_SIZE(e750_audio_gpios));
+	gpiod_hp_amp  = devm_gpiod_get(&pdev->dev, "Headphone amp", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(gpiod_hp_amp);
+	if (ret)
+		return ret;
+	gpiod_spk_amp  = devm_gpiod_get(&pdev->dev, "Speaker amp", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(gpiod_spk_amp);
 	if (ret)
 		return ret;
 
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret) {
+	if (ret)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
-		gpio_free_array(e750_audio_gpios, ARRAY_SIZE(e750_audio_gpios));
-	}
 	return ret;
 }
 
 static int e750_remove(struct platform_device *pdev)
 {
-	gpio_free_array(e750_audio_gpios, ARRAY_SIZE(e750_audio_gpios));
 	return 0;
 }
 
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index d74fcceef687..a39c494127cf 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -7,7 +7,7 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -15,15 +15,16 @@
 
 #include <asm/mach-types.h>
 #include <linux/platform_data/asoc-pxa.h>
-#include <mach/eseries-gpio.h>
+
+static struct gpio_desc *gpiod_spk_amp, *gpiod_hp_amp;
 
 static int e800_spk_amp_event(struct snd_soc_dapm_widget *w,
 				struct snd_kcontrol *kcontrol, int event)
 {
 	if (event & SND_SOC_DAPM_PRE_PMU)
-		gpio_set_value(GPIO_E800_SPK_AMP_ON, 1);
+		gpiod_set_value(gpiod_spk_amp, 1);
 	else if (event & SND_SOC_DAPM_POST_PMD)
-		gpio_set_value(GPIO_E800_SPK_AMP_ON, 0);
+		gpiod_set_value(gpiod_spk_amp, 0);
 
 	return 0;
 }
@@ -32,9 +33,9 @@ static int e800_hp_amp_event(struct snd_soc_dapm_widget *w,
 				struct snd_kcontrol *kcontrol, int event)
 {
 	if (event & SND_SOC_DAPM_PRE_PMU)
-		gpio_set_value(GPIO_E800_HP_AMP_OFF, 0);
+		gpiod_set_value(gpiod_hp_amp, 1);
 	else if (event & SND_SOC_DAPM_POST_PMD)
-		gpio_set_value(GPIO_E800_HP_AMP_OFF, 1);
+		gpiod_set_value(gpiod_hp_amp, 0);
 
 	return 0;
 }
@@ -100,35 +101,31 @@ static struct snd_soc_card e800 = {
 	.num_dapm_routes = ARRAY_SIZE(audio_map),
 };
 
-static struct gpio e800_audio_gpios[] = {
-	{ GPIO_E800_SPK_AMP_ON, GPIOF_OUT_INIT_HIGH, "Headphone amp" },
-	{ GPIO_E800_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
-};
-
 static int e800_probe(struct platform_device *pdev)
 {
 	struct snd_soc_card *card = &e800;
 	int ret;
 
-	ret = gpio_request_array(e800_audio_gpios,
-				 ARRAY_SIZE(e800_audio_gpios));
+	gpiod_hp_amp  = devm_gpiod_get(&pdev->dev, "Headphone amp", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(gpiod_hp_amp);
+	if (ret)
+		return ret;
+	gpiod_spk_amp  = devm_gpiod_get(&pdev->dev, "Speaker amp", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(gpiod_spk_amp);
 	if (ret)
 		return ret;
 
 	card->dev = &pdev->dev;
 
 	ret = devm_snd_soc_register_card(&pdev->dev, card);
-	if (ret) {
+	if (ret)
 		dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
 			ret);
-		gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios));
-	}
 	return ret;
 }
 
 static int e800_remove(struct platform_device *pdev)
 {
-	gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios));
 	return 0;
 }
 
-- 
2.29.2


  parent reply	other threads:[~2022-04-19 16:47 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-19 16:37 [PATCH v2 00/48] ARM: PXA multiplatform support Arnd Bergmann
2022-04-19 16:37 ` [PATCH 01/48] ARM: pxa: split mach/generic.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 02/48] ARM: pxa: make mainstone.h private Arnd Bergmann
2022-04-19 16:37 ` [PATCH 03/48] ARM: pxa: make mach/regs-uart.h private Arnd Bergmann
2022-04-19 16:37 ` [PATCH 04/48] ARM: pxa: remove mach/dma.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 05/48] ARM: pxa: split up mach/hardware.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 06/48] ARM: pxa: stop using mach/bitfield.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 07/48] ARM: pxa: move mach/sound.h to linux/platform_data/ Arnd Bergmann
2022-04-19 16:37 ` [PATCH 08/48] ARM: pxa: move regs-lcd.h into driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 09/48] watchdog: sa1100: use platform device registration Arnd Bergmann
2022-04-19 19:19   ` Guenter Roeck
2022-04-19 16:37 ` [PATCH 10/48] ARM: pxa: pxa2xx-ac97-lib: use IRQ resource Arnd Bergmann
2022-04-19 16:37 ` [PATCH 11/48] ARM: pxa: move pcmcia board data into mach-pxa Arnd Bergmann
2022-04-19 16:37 ` [PATCH 12/48] ARM: pxa: make addr-map.h header local Arnd Bergmann
2022-04-19 16:37 ` [PATCH 13/48] ARM: pxa: use pdev resource for palmld mmio Arnd Bergmann
2022-04-19 23:55   ` Damien Le Moal
2022-04-19 16:37 ` [PATCH 14/48] ARM: pxa: maybe fix gpio lookup tables Arnd Bergmann
2022-04-19 16:37 ` [PATCH 15/48] ARM: pxa: tosa: use gpio descriptor for audio Arnd Bergmann
2022-05-01 21:34   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 16/48] ARM: pxa: poodle: use platform data for poodle asoc driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 17/48] ARM: pxa: corgi: use gpio descriptors for audio Arnd Bergmann
2022-05-01 21:35   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 18/48] ARM: pxa: hx4700: " Arnd Bergmann
2022-05-01 21:41   ` Linus Walleij
2022-05-02  7:07     ` Arnd Bergmann
2022-05-04 21:59       ` Linus Walleij
2022-05-05  6:04         ` Arnd Bergmann
2022-05-05 14:33           ` Linus Walleij
2022-05-05 14:39             ` Mark Brown
2022-05-05 14:59               ` Arnd Bergmann
2022-05-05 15:04                 ` Mark Brown
2022-05-05 20:07                   ` Arnd Bergmann
2022-04-19 16:37 ` [PATCH 19/48] ARM: pxa: lubbock: pass udc irqs as resource Arnd Bergmann
2022-04-19 16:37 ` [PATCH 20/48] ARM: pxa: spitz: use gpio descriptors for audio Arnd Bergmann
2022-05-01 21:42   ` Linus Walleij
2022-04-19 16:37 ` Arnd Bergmann [this message]
2022-05-01 21:45   ` [PATCH 21/48] ARM: pxa: eseries: use gpio lookup " Linus Walleij
2022-04-19 16:37 ` [PATCH 22/48] ARM: pxa: z2: use gpio lookup for audio device Arnd Bergmann
2022-05-01 21:45   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 23/48] ARM: pxa: magician: use platform driver for audio Arnd Bergmann
2022-05-01 21:46   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 24/48] ARM: pxa: mainstone-wm97xx: use gpio lookup table Arnd Bergmann
2022-05-01 21:48   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 25/48] ARM: pxa: zylonite: use gpio lookup instead mfp header Arnd Bergmann
2022-05-01 21:50   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 26/48] input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration Arnd Bergmann
2022-04-19 16:37 ` [PATCH 27/48] input: touchscreen: mainstone: sync with zylonite driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 28/48] Input: touchscreen: use wrapper for pxa2xx ac97 registers Arnd Bergmann
2022-04-19 16:37 ` [PATCH 29/48] Input: wm97xx - switch to using threaded IRQ Arnd Bergmann
2022-04-19 16:37 ` [PATCH 30/48] Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Arnd Bergmann
2022-04-19 16:37 ` [PATCH 31/48] ASoC: pxa: use pdev resource for FIFO regs Arnd Bergmann
2022-04-19 16:37 ` [PATCH 32/48] ASoC: pxa: ac97: use normal MMIO accessors Arnd Bergmann
2022-04-19 16:37 ` [PATCH 33/48] ASoC: pxa: i2s: " Arnd Bergmann
2022-04-19 16:37 ` [PATCH 34/48] ARM: pxa: pcmcia: move smemc configuration back to arch Arnd Bergmann
2022-04-19 16:37 ` [PATCH 35/48] ARM: pxa: remove get_clk_frequency_khz() Arnd Bergmann
2022-04-19 16:37 ` [PATCH 36/48] cpufreq: pxa3: move clk register access to clk driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 37/48] ARM: pxa: move smemc register access from clk to platform Arnd Bergmann
2022-04-19 16:38 ` [PATCH 38/48] ARM: pxa: move clk register definitions to driver Arnd Bergmann
2022-04-19 16:38 ` [PATCH 39/48] power: tosa: simplify probe function Arnd Bergmann
2022-04-19 16:38 ` [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery Arnd Bergmann
2022-04-20 13:43   ` Sebastian Reichel
2022-04-20 13:48     ` Arnd Bergmann
2022-05-07 12:37   ` Linus Walleij
2022-04-19 16:38 ` [PATCH 41/48] ARM: pxa: remove unused mach/bitfield.h Arnd Bergmann
2022-04-19 16:38 ` [PATCH 42/48] ARM: mmp: remove tavorevb board support Arnd Bergmann
2022-04-19 16:38 ` [PATCH 43/48] ARM: mmp: rename pxa_register_device Arnd Bergmann
2022-04-19 16:38 ` [PATCH 44/48] ARM: pxa: move plat-pxa to drivers/soc/ Arnd Bergmann
2022-04-19 16:38 ` [PATCH 45/48] ARM: PXA: fix multi-cpu build of xsc3 Arnd Bergmann
2022-04-19 16:38 ` [PATCH 46/48] ARM: pxa: move mach/*.h to mach-pxa/ Arnd Bergmann
2022-04-19 16:38 ` [PATCH 47/48] ARM: pxa: remove support for MTD_XIP Arnd Bergmann
2022-04-19 16:38 ` [PATCH 48/48] ARM: pxa: convert to multiplatform Arnd Bergmann
2022-04-21 15:29 ` [PATCH v2 00/48] ARM: PXA multiplatform support Arnd Bergmann
2022-04-22 17:05 ` Guenter Roeck
2022-04-22 19:16   ` Arnd Bergmann
2022-04-22 20:55     ` Guenter Roeck
2022-04-22 22:04       ` Arnd Bergmann
2022-04-22 23:18         ` Guenter Roeck
2022-04-22 23:41         ` Guenter Roeck
2022-04-23 19:55           ` Arnd Bergmann
2022-04-24  2:09             ` Guenter Roeck
2022-04-24  8:52               ` Arnd Bergmann
2022-04-24 15:28                 ` Guenter Roeck
2022-04-24 18:48                   ` Arnd Bergmann
2022-04-28 13:44                     ` Arnd Bergmann
2022-04-28 16:49                       ` Guenter Roeck
2022-04-29 17:48                       ` Guenter Roeck
2022-04-29 20:23                         ` Guenter Roeck
2022-04-29 21:46                           ` Arnd Bergmann
2022-04-29 23:09                             ` Guenter Roeck
2022-04-30  8:04                               ` Arnd Bergmann
2022-04-30 12:41                                 ` Guenter Roeck
2022-04-30 13:32                                   ` Arnd Bergmann
2022-04-30 14:23                                     ` Arnd Bergmann
2022-05-02 16:26                                       ` Guenter Roeck
2022-05-02 19:21                                         ` Arnd Bergmann
2022-05-02 20:35                                           ` Guenter Roeck
2022-05-02 21:03                                             ` Arnd Bergmann
2022-05-03  2:55                                               ` Guenter Roeck
2022-05-03  7:17                                                 ` Arnd Bergmann
2022-05-03 14:04                                                   ` Guenter Roeck
2022-05-03 14:29                                                     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220419163810.2118169-22-arnd@kernel.org \
    --to=arnd@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=daniel@zonque.org \
    --cc=deller@gmx.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@dominikbrodowski.net \
    --cc=lkundrak@v3.sk \
    --cc=lost.distance@yahoo.com \
    --cc=marek.vasut@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=patches@opensource.cirrus.com \
    --cc=philipp.zabel@gmail.com \
    --cc=rafael@kernel.org \
    --cc=robert.jarzmik@free.fr \
    --cc=sboyd@kernel.org \
    --cc=slapin@ossfans.org \
    --cc=sleep_walker@suse.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).