linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@kernel.org>
To: Mark Brown <broonie@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>,
	Robert Jarzmik <robert.jarzmik@free.fr>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	Arnd Bergmann <arnd@arndb.de>, Daniel Mack <daniel@zonque.org>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Philipp Zabel <philipp.zabel@gmail.com>,
	Lubomir Rintel <lkundrak@v3.sk>,
	Paul Parsons <lost.distance@yahoo.com>,
	Tomas Cech <sleep_walker@suse.com>,
	Sergey Lapin <slapin@ossfans.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Dominik Brodowski <linux@dominikbrodowski.net>,
	Helge Deller <deller@gmx.de>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"open list:BROADCOM NVRAM DRIVER" <linux-mips@vger.kernel.org>,
	IDE-ML <linux-ide@vger.kernel.org>,
	linux-clk <linux-clk@vger.kernel.org>,
	Linux PM list <linux-pm@vger.kernel.org>,
	"open list:HID CORE LAYER" <linux-input@vger.kernel.org>,
	patches@opensource.cirrus.com, linux-leds@vger.kernel.org,
	linux-mmc <linux-mmc@vger.kernel.org>,
	linux-mtd <linux-mtd@lists.infradead.org>,
	linux-rtc@vger.kernel.org, USB list <linux-usb@vger.kernel.org>,
	Linux Fbdev development list <linux-fbdev@vger.kernel.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: [PATCH 18/48] ARM: pxa: hx4700: use gpio descriptors for audio
Date: Thu, 5 May 2022 22:07:56 +0200	[thread overview]
Message-ID: <CAK8P3a1H-74Q1CzqW_Q=7g0KGkcd+TY3HTBbbE27XhXmfJhrRA@mail.gmail.com> (raw)
In-Reply-To: <YnPna0pW9csiFkHK@sirena.org.uk>

On Thu, May 5, 2022 at 5:04 PM Mark Brown <broonie@kernel.org> wrote:
> On Thu, May 05, 2022 at 04:59:35PM +0200, Arnd Bergmann wrote:
> > On Thu, May 5, 2022 at 4:39 PM Mark Brown <broonie@kernel.org> wrote:
> > > On Thu, May 05, 2022 at 04:33:06PM +0200, Linus Walleij wrote:
> > > > On Thu, May 5, 2022 at 8:04 AM Arnd Bergmann <arnd@kernel.org> wrote:
>
> > > > > static struct snd_soc_jack_pin hs_jack_pin[] = {
> > > > >         {
> > > > >                 .pin    = "Headphone Jack",
> > > > >                 .mask   = SND_JACK_HEADPHONE,
> > > > >         },
> > > > >         {
> > > > >                 .pin    = "Speaker",
> > > > >                 /* disable speaker when hp jack is inserted */
> > > > >                 .mask   = SND_JACK_HEADPHONE,
> > > > >                 .invert = 1,
> > > > >         },
>
> > > > Hm some ASoC thingie. No idea what that is, but I suppose another
> > > > place where a subsystem for legacy reasons try to do the gpiolib
> > > > inversion on it's own accord. That one isn't flagged as active low in the
> > > > descriptor so it's fine I guess.
>
> > > It's saying that when the headphone is inserted the headphone output
> > > should be enabled and the speaker output should be disabled, and vice
> > > versa.
>
> > Ok, that sounds like I should remove the flag here if I declare the
> > GPIO line as GPIO_ACTIVE_LOW instead of GPIO_ACTIVE_HIGH, right?
>
> If you change the sense of the GPIO you'll need to flip the invert to
> the headphone instead of the speaker - whichever way round the GPIO
> sense is each of the pins should be taking the opposite sense from the
> GPIO state to the other.

Ok, I hope I got it this time:

- The hs_jack_gpio/"earphone-det" is declared as GPIO_ACTIVE_LOW,
    with the ".invert" dropped in the snd_soc_jack_gpio definition to match

- "spk-sd" is declared as GPIO_ACTIVE_LOW, so both
  this and  "hp-driver" are enabled by setting the gpio to active, rather than
  the two being opposites

- snd_soc_jack_pin flips the 'invert' flag from speaker to headphone, since
  the "earphone-det" is now  reversed

- hx4700_spk_power() flips polarity when setting the output to match the
  GPIO_ACTIVE_LOW setting, but hx4700_hp_power() does not change.

        Arnd

commit 20a9b05eff0488b78aa02c07f58654daa294069a
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Wed Sep 11 14:27:13 2019 +0200

    ARM: pxa: hx4700: use gpio descriptors for audio

    The audio driver should not use a hardwired gpio number
    from the header. Change it to use a lookup table.

    Cc: Philipp Zabel <philipp.zabel@gmail.com>
    Cc: Paul Parsons <lost.distance@yahoo.com>
    Acked-by: Mark Brown <broonie@kernel.org>
    Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
    Cc: alsa-devel@alsa-project.org
    Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c
b/arch/arm/mach-pxa/hx4700-pcmcia.c
index e8acbfc9ef6c..e2331dfe427d 100644
--- a/arch/arm/mach-pxa/hx4700-pcmcia.c
+++ b/arch/arm/mach-pxa/hx4700-pcmcia.c
@@ -10,7 +10,7 @@
 #include <linux/irq.h>

 #include <asm/mach-types.h>
-#include <mach/hx4700.h>
+#include "hx4700.h"

 #include <pcmcia/soc_common.h>

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 140a44cb2989..2ae06edf413c 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -41,7 +41,7 @@

 #include "pxa27x.h"
 #include "addr-map.h"
-#include <mach/hx4700.h>
+#include "hx4700.h"
 #include <linux/platform_data/irda-pxaficp.h>

 #include <sound/ak4641.h>
@@ -834,6 +834,19 @@ static struct i2c_board_info i2c_board_info[]
__initdata = {
        },
 };

+static struct gpiod_lookup_table hx4700_audio_gpio_table = {
+       .dev_id = "hx4700-audio",
+       .table = {
+               GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET,
+                           "earphone-det", GPIO_ACTIVE_LOW),
+               GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER,
+                           "hp-driver", GPIO_ACTIVE_HIGH),
+               GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD,
+                           "spk-sd", GPIO_ACTIVE_LOW),
+               { },
+       },
+};
+
 static struct platform_device audio = {
        .name   = "hx4700-audio",
        .id     = -1,
@@ -895,6 +908,7 @@ static void __init hx4700_init(void)

        gpiod_add_lookup_table(&bq24022_gpiod_table);
        gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
+       gpiod_add_lookup_table(&hx4700_audio_gpio_table);
        platform_add_devices(devices, ARRAY_SIZE(devices));
        pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));

diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h
b/arch/arm/mach-pxa/hx4700.h
similarity index 99%
rename from arch/arm/mach-pxa/include/mach/hx4700.h
rename to arch/arm/mach-pxa/hx4700.h
index 0c30e6d9c660..ce2db33989e1 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/hx4700.h
@@ -10,7 +10,7 @@

 #include <linux/gpio.h>
 #include <linux/mfd/asic3.h>
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+#include <mach/irqs.h> /* PXA_NR_BUILTIN_GPIO */

 #define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE      (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c
index 7334fac758de..e6473c50e512 100644
--- a/sound/soc/pxa/hx4700.c
+++ b/sound/soc/pxa/hx4700.c
@@ -10,7 +10,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>

 #include <sound/core.h>
 #include <sound/jack.h>
@@ -18,10 +18,10 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>

-#include <mach/hx4700.h>
 #include <asm/mach-types.h>
 #include "pxa2xx-i2s.h"

+static struct gpio_desc *gpiod_hp_driver, *gpiod_spk_sd;
 static struct snd_soc_jack hs_jack;

 /* Headphones jack detection DAPM pin */
@@ -29,20 +29,18 @@ static struct snd_soc_jack_pin hs_jack_pin[] = {
        {
                .pin    = "Headphone Jack",
                .mask   = SND_JACK_HEADPHONE,
+               .invert = 1,
        },
        {
                .pin    = "Speaker",
                /* disable speaker when hp jack is inserted */
                .mask   = SND_JACK_HEADPHONE,
-               .invert = 1,
        },
 };

 /* Headphones jack detection GPIO */
 static struct snd_soc_jack_gpio hs_jack_gpio = {
-       .gpio           = GPIO75_HX4700_EARPHONE_nDET,
-       .invert         = true,
-       .name           = "hp-gpio",
+       .name           = "earphone-det",
        .report         = SND_JACK_HEADPHONE,
        .debounce_time  = 200,
 };
@@ -81,14 +79,14 @@ static const struct snd_soc_ops hx4700_ops = {
 static int hx4700_spk_power(struct snd_soc_dapm_widget *w,
                            struct snd_kcontrol *k, int event)
 {
-       gpio_set_value(GPIO107_HX4700_SPK_nSD, !!SND_SOC_DAPM_EVENT_ON(event));
+       gpiod_set_value(gpiod_spk_sd, !SND_SOC_DAPM_EVENT_ON(event));
        return 0;
 }

 static int hx4700_hp_power(struct snd_soc_dapm_widget *w,
                           struct snd_kcontrol *k, int event)
 {
-       gpio_set_value(GPIO92_HX4700_HP_DRIVER, !!SND_SOC_DAPM_EVENT_ON(event));
+       gpiod_set_value(gpiod_hp_driver, !!SND_SOC_DAPM_EVENT_ON(event));
        return 0;
 }

@@ -162,11 +160,6 @@ static struct snd_soc_card snd_soc_card_hx4700 = {
        .fully_routed           = true,
 };

-static struct gpio hx4700_audio_gpios[] = {
-       { GPIO107_HX4700_SPK_nSD, GPIOF_OUT_INIT_HIGH, "SPK_POWER" },
-       { GPIO92_HX4700_HP_DRIVER, GPIOF_OUT_INIT_LOW, "EP_POWER" },
-};
-
 static int hx4700_audio_probe(struct platform_device *pdev)
 {
        int ret;
@@ -174,26 +167,26 @@ static int hx4700_audio_probe(struct
platform_device *pdev)
        if (!machine_is_h4700())
                return -ENODEV;

-       ret = gpio_request_array(hx4700_audio_gpios,
-                               ARRAY_SIZE(hx4700_audio_gpios));
+       gpiod_hp_driver = devm_gpiod_get(&pdev->dev, "hp-driver", GPIOD_ASIS);
+       ret = PTR_ERR_OR_ZERO(gpiod_hp_driver);
+       if (ret)
+               return ret;
+       gpiod_spk_sd = devm_gpiod_get(&pdev->dev, "spk-sd", GPIOD_ASIS);
+       ret = PTR_ERR_OR_ZERO(gpiod_spk_sd);
        if (ret)
                return ret;

+       hs_jack_gpio.gpiod_dev = &pdev->dev;
        snd_soc_card_hx4700.dev = &pdev->dev;
        ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_hx4700);
-       if (ret)
-               gpio_free_array(hx4700_audio_gpios,
-                               ARRAY_SIZE(hx4700_audio_gpios));

        return ret;
 }

 static int hx4700_audio_remove(struct platform_device *pdev)
 {
-       gpio_set_value(GPIO92_HX4700_HP_DRIVER, 0);
-       gpio_set_value(GPIO107_HX4700_SPK_nSD, 0);
-
-       gpio_free_array(hx4700_audio_gpios, ARRAY_SIZE(hx4700_audio_gpios));
+       gpiod_set_value(gpiod_hp_driver, 0);
+       gpiod_set_value(gpiod_spk_sd, 0);
        return 0;
 }

  reply	other threads:[~2022-05-05 20:08 UTC|newest]

Thread overview: 101+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-19 16:37 [PATCH v2 00/48] ARM: PXA multiplatform support Arnd Bergmann
2022-04-19 16:37 ` [PATCH 01/48] ARM: pxa: split mach/generic.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 02/48] ARM: pxa: make mainstone.h private Arnd Bergmann
2022-04-19 16:37 ` [PATCH 03/48] ARM: pxa: make mach/regs-uart.h private Arnd Bergmann
2022-04-19 16:37 ` [PATCH 04/48] ARM: pxa: remove mach/dma.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 05/48] ARM: pxa: split up mach/hardware.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 06/48] ARM: pxa: stop using mach/bitfield.h Arnd Bergmann
2022-04-19 16:37 ` [PATCH 07/48] ARM: pxa: move mach/sound.h to linux/platform_data/ Arnd Bergmann
2022-04-19 16:37 ` [PATCH 08/48] ARM: pxa: move regs-lcd.h into driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 09/48] watchdog: sa1100: use platform device registration Arnd Bergmann
2022-04-19 19:19   ` Guenter Roeck
2022-04-19 16:37 ` [PATCH 10/48] ARM: pxa: pxa2xx-ac97-lib: use IRQ resource Arnd Bergmann
2022-04-19 16:37 ` [PATCH 11/48] ARM: pxa: move pcmcia board data into mach-pxa Arnd Bergmann
2022-04-19 16:37 ` [PATCH 12/48] ARM: pxa: make addr-map.h header local Arnd Bergmann
2022-04-19 16:37 ` [PATCH 13/48] ARM: pxa: use pdev resource for palmld mmio Arnd Bergmann
2022-04-19 23:55   ` Damien Le Moal
2022-04-19 16:37 ` [PATCH 14/48] ARM: pxa: maybe fix gpio lookup tables Arnd Bergmann
2022-04-19 16:37 ` [PATCH 15/48] ARM: pxa: tosa: use gpio descriptor for audio Arnd Bergmann
2022-05-01 21:34   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 16/48] ARM: pxa: poodle: use platform data for poodle asoc driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 17/48] ARM: pxa: corgi: use gpio descriptors for audio Arnd Bergmann
2022-05-01 21:35   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 18/48] ARM: pxa: hx4700: " Arnd Bergmann
2022-05-01 21:41   ` Linus Walleij
2022-05-02  7:07     ` Arnd Bergmann
2022-05-04 21:59       ` Linus Walleij
2022-05-05  6:04         ` Arnd Bergmann
2022-05-05 14:33           ` Linus Walleij
2022-05-05 14:39             ` Mark Brown
2022-05-05 14:59               ` Arnd Bergmann
2022-05-05 15:04                 ` Mark Brown
2022-05-05 20:07                   ` Arnd Bergmann [this message]
2022-04-19 16:37 ` [PATCH 19/48] ARM: pxa: lubbock: pass udc irqs as resource Arnd Bergmann
2022-04-19 16:37 ` [PATCH 20/48] ARM: pxa: spitz: use gpio descriptors for audio Arnd Bergmann
2022-05-01 21:42   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 21/48] ARM: pxa: eseries: use gpio lookup " Arnd Bergmann
2022-05-01 21:45   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 22/48] ARM: pxa: z2: use gpio lookup for audio device Arnd Bergmann
2022-05-01 21:45   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 23/48] ARM: pxa: magician: use platform driver for audio Arnd Bergmann
2022-05-01 21:46   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 24/48] ARM: pxa: mainstone-wm97xx: use gpio lookup table Arnd Bergmann
2022-05-01 21:48   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 25/48] ARM: pxa: zylonite: use gpio lookup instead mfp header Arnd Bergmann
2022-05-01 21:50   ` Linus Walleij
2022-04-19 16:37 ` [PATCH 26/48] input: touchscreen: mainstone: fix pxa2xx+pxa3xx configuration Arnd Bergmann
2022-04-19 16:37 ` [PATCH 27/48] input: touchscreen: mainstone: sync with zylonite driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 28/48] Input: touchscreen: use wrapper for pxa2xx ac97 registers Arnd Bergmann
2022-04-19 16:37 ` [PATCH 29/48] Input: wm97xx - switch to using threaded IRQ Arnd Bergmann
2022-04-19 16:37 ` [PATCH 30/48] Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Arnd Bergmann
2022-04-19 16:37 ` [PATCH 31/48] ASoC: pxa: use pdev resource for FIFO regs Arnd Bergmann
2022-04-19 16:37 ` [PATCH 32/48] ASoC: pxa: ac97: use normal MMIO accessors Arnd Bergmann
2022-04-19 16:37 ` [PATCH 33/48] ASoC: pxa: i2s: " Arnd Bergmann
2022-04-19 16:37 ` [PATCH 34/48] ARM: pxa: pcmcia: move smemc configuration back to arch Arnd Bergmann
2022-04-19 16:37 ` [PATCH 35/48] ARM: pxa: remove get_clk_frequency_khz() Arnd Bergmann
2022-04-19 16:37 ` [PATCH 36/48] cpufreq: pxa3: move clk register access to clk driver Arnd Bergmann
2022-04-19 16:37 ` [PATCH 37/48] ARM: pxa: move smemc register access from clk to platform Arnd Bergmann
2022-04-19 16:38 ` [PATCH 38/48] ARM: pxa: move clk register definitions to driver Arnd Bergmann
2022-04-19 16:38 ` [PATCH 39/48] power: tosa: simplify probe function Arnd Bergmann
2022-04-19 16:38 ` [PATCH 40/48] ARM: pxa: tosa: use gpio lookup for battery Arnd Bergmann
2022-04-20 13:43   ` Sebastian Reichel
2022-04-20 13:48     ` Arnd Bergmann
2022-05-07 12:37   ` Linus Walleij
2022-04-19 16:38 ` [PATCH 41/48] ARM: pxa: remove unused mach/bitfield.h Arnd Bergmann
2022-04-19 16:38 ` [PATCH 42/48] ARM: mmp: remove tavorevb board support Arnd Bergmann
2022-04-19 16:38 ` [PATCH 43/48] ARM: mmp: rename pxa_register_device Arnd Bergmann
2022-04-19 16:38 ` [PATCH 44/48] ARM: pxa: move plat-pxa to drivers/soc/ Arnd Bergmann
2022-04-19 16:38 ` [PATCH 45/48] ARM: PXA: fix multi-cpu build of xsc3 Arnd Bergmann
2022-04-19 16:38 ` [PATCH 46/48] ARM: pxa: move mach/*.h to mach-pxa/ Arnd Bergmann
2022-04-19 16:38 ` [PATCH 47/48] ARM: pxa: remove support for MTD_XIP Arnd Bergmann
2022-04-19 16:38 ` [PATCH 48/48] ARM: pxa: convert to multiplatform Arnd Bergmann
2022-04-21 15:29 ` [PATCH v2 00/48] ARM: PXA multiplatform support Arnd Bergmann
2022-04-22 17:05 ` Guenter Roeck
2022-04-22 19:16   ` Arnd Bergmann
2022-04-22 20:55     ` Guenter Roeck
2022-04-22 22:04       ` Arnd Bergmann
2022-04-22 23:18         ` Guenter Roeck
2022-04-22 23:41         ` Guenter Roeck
2022-04-23 19:55           ` Arnd Bergmann
2022-04-24  2:09             ` Guenter Roeck
2022-04-24  8:52               ` Arnd Bergmann
2022-04-24 15:28                 ` Guenter Roeck
2022-04-24 18:48                   ` Arnd Bergmann
2022-04-28 13:44                     ` Arnd Bergmann
2022-04-28 16:49                       ` Guenter Roeck
2022-04-29 17:48                       ` Guenter Roeck
2022-04-29 20:23                         ` Guenter Roeck
2022-04-29 21:46                           ` Arnd Bergmann
2022-04-29 23:09                             ` Guenter Roeck
2022-04-30  8:04                               ` Arnd Bergmann
2022-04-30 12:41                                 ` Guenter Roeck
2022-04-30 13:32                                   ` Arnd Bergmann
2022-04-30 14:23                                     ` Arnd Bergmann
2022-05-02 16:26                                       ` Guenter Roeck
2022-05-02 19:21                                         ` Arnd Bergmann
2022-05-02 20:35                                           ` Guenter Roeck
2022-05-02 21:03                                             ` Arnd Bergmann
2022-05-03  2:55                                               ` Guenter Roeck
2022-05-03  7:17                                                 ` Arnd Bergmann
2022-05-03 14:04                                                   ` Guenter Roeck
2022-05-03 14:29                                                     ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAK8P3a1H-74Q1CzqW_Q=7g0KGkcd+TY3HTBbbE27XhXmfJhrRA@mail.gmail.com' \
    --to=arnd@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=daniel@zonque.org \
    --cc=deller@gmx.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@dominikbrodowski.net \
    --cc=lkundrak@v3.sk \
    --cc=lost.distance@yahoo.com \
    --cc=marek.vasut@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=patches@opensource.cirrus.com \
    --cc=philipp.zabel@gmail.com \
    --cc=rafael@kernel.org \
    --cc=robert.jarzmik@free.fr \
    --cc=sboyd@kernel.org \
    --cc=slapin@ossfans.org \
    --cc=sleep_walker@suse.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).