* [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
@ 2022-04-28 9:16 Pali Rohár
2022-04-28 13:10 ` Guenter Roeck
0 siblings, 1 reply; 5+ messages in thread
From: Pali Rohár @ 2022-04-28 9:16 UTC (permalink / raw)
To: Wim Van Sebroeck, Guenter Roeck, Rob Herring
Cc: linux-watchdog, devicetree, linux-kernel
On some boards is WDI logic of max6370 chip connected via GPIO. So extend
max63xx_wdt driver and DTS schema to allow specifying WDI logic via GPIO.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
.../bindings/watchdog/maxim,max63xx.yaml | 4 +++
drivers/watchdog/max63xx_wdt.c | 28 +++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
index ab9641e845db..a97aa0135ef9 100644
--- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
+++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
@@ -27,6 +27,10 @@ properties:
description: This is a 1-byte memory-mapped address
maxItems: 1
+ gpios:
+ description: Optional GPIO used for controlling WDI when WDI bit is not mapped to memory
+ maxItems: 1
+
required:
- compatible
- reg
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
index 9e1541cfae0d..eaf00c3f06a5 100644
--- a/drivers/watchdog/max63xx_wdt.c
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/property.h>
+#include <linux/gpio/consumer.h>
#define DEFAULT_HEARTBEAT 60
#define MAX_HEARTBEAT 60
@@ -53,6 +54,9 @@ struct max63xx_wdt {
void __iomem *base;
spinlock_t lock;
+ /* GPIOs */
+ struct gpio_desc *gpio_wdi;
+
/* WDI and WSET bits write access routines */
void (*ping)(struct max63xx_wdt *wdt);
void (*set)(struct max63xx_wdt *wdt, u8 set);
@@ -158,6 +162,17 @@ static const struct watchdog_info max63xx_wdt_info = {
.identity = "max63xx Watchdog",
};
+static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
+{
+ spin_lock(&wdt->lock);
+
+ gpiod_set_value_cansleep(wdt->gpio_wdi, 1);
+ udelay(1);
+ gpiod_set_value_cansleep(wdt->gpio_wdi, 0);
+
+ spin_unlock(&wdt->lock);
+}
+
static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
{
u8 val;
@@ -225,6 +240,19 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
return -EINVAL;
}
+ wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
+ if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT) {
+ if (PTR_ERR(wdt->gpio_wdi) != -EPROBE_DEFER)
+ dev_err(dev, "unable to request gpio: %ld\n",
+ PTR_ERR(wdt->gpio_wdi));
+ return PTR_ERR(wdt->gpio_wdi);
+ }
+
+ if (!IS_ERR(wdt->gpio_wdi))
+ wdt->ping = max63xx_gpio_ping;
+ else
+ wdt->gpio_wdi = NULL;
+
err = max63xx_mmap_init(pdev, wdt);
if (err)
return err;
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
2022-04-28 9:16 [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO Pali Rohár
@ 2022-04-28 13:10 ` Guenter Roeck
2022-04-28 14:32 ` Pali Rohár
0 siblings, 1 reply; 5+ messages in thread
From: Guenter Roeck @ 2022-04-28 13:10 UTC (permalink / raw)
To: Pali Rohár, Wim Van Sebroeck, Rob Herring
Cc: linux-watchdog, devicetree, linux-kernel
On 4/28/22 02:16, Pali Rohár wrote:
> On some boards is WDI logic of max6370 chip connected via GPIO. So extend
> max63xx_wdt driver and DTS schema to allow specifying WDI logic via GPIO.
>
> Signed-off-by: Pali Rohár <pali@kernel.org>
How is that different to just using the gpio watchdog driver ?
Guenter
> ---
> .../bindings/watchdog/maxim,max63xx.yaml | 4 +++
> drivers/watchdog/max63xx_wdt.c | 28 +++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> index ab9641e845db..a97aa0135ef9 100644
> --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> @@ -27,6 +27,10 @@ properties:
> description: This is a 1-byte memory-mapped address
> maxItems: 1
>
> + gpios:
> + description: Optional GPIO used for controlling WDI when WDI bit is not mapped to memory
> + maxItems: 1
> +
> required:
> - compatible
> - reg
> diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
> index 9e1541cfae0d..eaf00c3f06a5 100644
> --- a/drivers/watchdog/max63xx_wdt.c
> +++ b/drivers/watchdog/max63xx_wdt.c
> @@ -27,6 +27,7 @@
> #include <linux/io.h>
> #include <linux/slab.h>
> #include <linux/property.h>
> +#include <linux/gpio/consumer.h>
>
> #define DEFAULT_HEARTBEAT 60
> #define MAX_HEARTBEAT 60
> @@ -53,6 +54,9 @@ struct max63xx_wdt {
> void __iomem *base;
> spinlock_t lock;
>
> + /* GPIOs */
> + struct gpio_desc *gpio_wdi;
> +
> /* WDI and WSET bits write access routines */
> void (*ping)(struct max63xx_wdt *wdt);
> void (*set)(struct max63xx_wdt *wdt, u8 set);
> @@ -158,6 +162,17 @@ static const struct watchdog_info max63xx_wdt_info = {
> .identity = "max63xx Watchdog",
> };
>
> +static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
> +{
> + spin_lock(&wdt->lock);
> +
> + gpiod_set_value_cansleep(wdt->gpio_wdi, 1);
> + udelay(1);
> + gpiod_set_value_cansleep(wdt->gpio_wdi, 0);
> +
> + spin_unlock(&wdt->lock);
> +}
> +
> static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
> {
> u8 val;
> @@ -225,6 +240,19 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> + wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
> + if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT) {
> + if (PTR_ERR(wdt->gpio_wdi) != -EPROBE_DEFER)
> + dev_err(dev, "unable to request gpio: %ld\n",
> + PTR_ERR(wdt->gpio_wdi));
> + return PTR_ERR(wdt->gpio_wdi);
> + }
> +
> + if (!IS_ERR(wdt->gpio_wdi))
> + wdt->ping = max63xx_gpio_ping;
> + else
> + wdt->gpio_wdi = NULL;
> +
> err = max63xx_mmap_init(pdev, wdt);
> if (err)
> return err;
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
2022-04-28 13:10 ` Guenter Roeck
@ 2022-04-28 14:32 ` Pali Rohár
2022-04-28 15:29 ` Guenter Roeck
0 siblings, 1 reply; 5+ messages in thread
From: Pali Rohár @ 2022-04-28 14:32 UTC (permalink / raw)
To: Guenter Roeck
Cc: Wim Van Sebroeck, Rob Herring, linux-watchdog, devicetree, linux-kernel
On Thursday 28 April 2022 06:10:56 Guenter Roeck wrote:
> On 4/28/22 02:16, Pali Rohár wrote:
> > On some boards is WDI logic of max6370 chip connected via GPIO. So extend
> > max63xx_wdt driver and DTS schema to allow specifying WDI logic via GPIO.
> >
> > Signed-off-by: Pali Rohár <pali@kernel.org>
>
> How is that different to just using the gpio watchdog driver ?
GPIO watchdog driver does not support max6370 memory mapped
configuration.
With this change, max6370 can use memory mapped space for watchdog
configuration and GPIO WDI for pinging.
> Guenter
>
> > ---
> > .../bindings/watchdog/maxim,max63xx.yaml | 4 +++
> > drivers/watchdog/max63xx_wdt.c | 28 +++++++++++++++++++
> > 2 files changed, 32 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> > index ab9641e845db..a97aa0135ef9 100644
> > --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> > +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> > @@ -27,6 +27,10 @@ properties:
> > description: This is a 1-byte memory-mapped address
> > maxItems: 1
> > + gpios:
> > + description: Optional GPIO used for controlling WDI when WDI bit is not mapped to memory
> > + maxItems: 1
> > +
> > required:
> > - compatible
> > - reg
> > diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
> > index 9e1541cfae0d..eaf00c3f06a5 100644
> > --- a/drivers/watchdog/max63xx_wdt.c
> > +++ b/drivers/watchdog/max63xx_wdt.c
> > @@ -27,6 +27,7 @@
> > #include <linux/io.h>
> > #include <linux/slab.h>
> > #include <linux/property.h>
> > +#include <linux/gpio/consumer.h>
> > #define DEFAULT_HEARTBEAT 60
> > #define MAX_HEARTBEAT 60
> > @@ -53,6 +54,9 @@ struct max63xx_wdt {
> > void __iomem *base;
> > spinlock_t lock;
> > + /* GPIOs */
> > + struct gpio_desc *gpio_wdi;
> > +
> > /* WDI and WSET bits write access routines */
> > void (*ping)(struct max63xx_wdt *wdt);
> > void (*set)(struct max63xx_wdt *wdt, u8 set);
> > @@ -158,6 +162,17 @@ static const struct watchdog_info max63xx_wdt_info = {
> > .identity = "max63xx Watchdog",
> > };
> > +static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
> > +{
> > + spin_lock(&wdt->lock);
> > +
> > + gpiod_set_value_cansleep(wdt->gpio_wdi, 1);
> > + udelay(1);
> > + gpiod_set_value_cansleep(wdt->gpio_wdi, 0);
> > +
> > + spin_unlock(&wdt->lock);
> > +}
> > +
> > static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
> > {
> > u8 val;
> > @@ -225,6 +240,19 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
> > return -EINVAL;
> > }
> > + wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
> > + if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT) {
> > + if (PTR_ERR(wdt->gpio_wdi) != -EPROBE_DEFER)
> > + dev_err(dev, "unable to request gpio: %ld\n",
> > + PTR_ERR(wdt->gpio_wdi));
> > + return PTR_ERR(wdt->gpio_wdi);
> > + }
> > +
> > + if (!IS_ERR(wdt->gpio_wdi))
> > + wdt->ping = max63xx_gpio_ping;
> > + else
> > + wdt->gpio_wdi = NULL;
> > +
> > err = max63xx_mmap_init(pdev, wdt);
> > if (err)
> > return err;
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
2022-04-28 14:32 ` Pali Rohár
@ 2022-04-28 15:29 ` Guenter Roeck
2022-04-28 18:25 ` Pali Rohár
0 siblings, 1 reply; 5+ messages in thread
From: Guenter Roeck @ 2022-04-28 15:29 UTC (permalink / raw)
To: Pali Rohár
Cc: Wim Van Sebroeck, Rob Herring, linux-watchdog, devicetree, linux-kernel
On 4/28/22 07:32, Pali Rohár wrote:
> On Thursday 28 April 2022 06:10:56 Guenter Roeck wrote:
>> On 4/28/22 02:16, Pali Rohár wrote:
>>> On some boards is WDI logic of max6370 chip connected via GPIO. So extend
>>> max63xx_wdt driver and DTS schema to allow specifying WDI logic via GPIO.
>>>
>>> Signed-off-by: Pali Rohár <pali@kernel.org>
>>
>> How is that different to just using the gpio watchdog driver ?
>
> GPIO watchdog driver does not support max6370 memory mapped
> configuration.
>
> With this change, max6370 can use memory mapped space for watchdog
> configuration and GPIO WDI for pinging.
>
Ok, that makes sense. Comments below.
Thanks,
Guenter
>> Guenter
>>
>>> ---
>>> .../bindings/watchdog/maxim,max63xx.yaml | 4 +++
>>> drivers/watchdog/max63xx_wdt.c | 28 +++++++++++++++++++
>>> 2 files changed, 32 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
>>> index ab9641e845db..a97aa0135ef9 100644
>>> --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
>>> +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
>>> @@ -27,6 +27,10 @@ properties:
>>> description: This is a 1-byte memory-mapped address
>>> maxItems: 1
>>> + gpios:
>>> + description: Optional GPIO used for controlling WDI when WDI bit is not mapped to memory
>>> + maxItems: 1
>>> +
>>> required:
>>> - compatible
>>> - reg
Devicetree patches needs to be separate.
>>> diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
>>> index 9e1541cfae0d..eaf00c3f06a5 100644
>>> --- a/drivers/watchdog/max63xx_wdt.c
>>> +++ b/drivers/watchdog/max63xx_wdt.c
>>> @@ -27,6 +27,7 @@
>>> #include <linux/io.h>
>>> #include <linux/slab.h>
>>> #include <linux/property.h>
>>> +#include <linux/gpio/consumer.h>
>>> #define DEFAULT_HEARTBEAT 60
>>> #define MAX_HEARTBEAT 60
>>> @@ -53,6 +54,9 @@ struct max63xx_wdt {
>>> void __iomem *base;
>>> spinlock_t lock;
>>> + /* GPIOs */
>>> + struct gpio_desc *gpio_wdi;
>>> +
>>> /* WDI and WSET bits write access routines */
>>> void (*ping)(struct max63xx_wdt *wdt);
>>> void (*set)(struct max63xx_wdt *wdt, u8 set);
>>> @@ -158,6 +162,17 @@ static const struct watchdog_info max63xx_wdt_info = {
>>> .identity = "max63xx Watchdog",
>>> };
>>> +static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
>>> +{
>>> + spin_lock(&wdt->lock);
>>> +
>>> + gpiod_set_value_cansleep(wdt->gpio_wdi, 1);
>>> + udelay(1);
>>> + gpiod_set_value_cansleep(wdt->gpio_wdi, 0);
>>> +
>>> + spin_unlock(&wdt->lock);
>>> +}
>>> +
>>> static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
>>> {
>>> u8 val;
>>> @@ -225,6 +240,19 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
>>> return -EINVAL;
>>> }
>>> + wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
>>> + if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT) {
>>> + if (PTR_ERR(wdt->gpio_wdi) != -EPROBE_DEFER)
>>> + dev_err(dev, "unable to request gpio: %ld\n",
>>> + PTR_ERR(wdt->gpio_wdi));
Please use dev_err_probe().
>>> + return PTR_ERR(wdt->gpio_wdi);
>>> + }
>>> +
>>> + if (!IS_ERR(wdt->gpio_wdi))
>>> + wdt->ping = max63xx_gpio_ping;
>>> + else
>>> + wdt->gpio_wdi = NULL;
Why set gpio_wdi to NULL? It isn't used if the ping function is not set.
>>> +
>>> err = max63xx_mmap_init(pdev, wdt);
Doesn't this override the gpio ping function set above ?
>>> if (err)
>>> return err;
>>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO
2022-04-28 15:29 ` Guenter Roeck
@ 2022-04-28 18:25 ` Pali Rohár
0 siblings, 0 replies; 5+ messages in thread
From: Pali Rohár @ 2022-04-28 18:25 UTC (permalink / raw)
To: Guenter Roeck
Cc: Wim Van Sebroeck, Rob Herring, linux-watchdog, devicetree, linux-kernel
On Thursday 28 April 2022 08:29:52 Guenter Roeck wrote:
> On 4/28/22 07:32, Pali Rohár wrote:
> > On Thursday 28 April 2022 06:10:56 Guenter Roeck wrote:
> > > On 4/28/22 02:16, Pali Rohár wrote:
> > > > On some boards is WDI logic of max6370 chip connected via GPIO. So extend
> > > > max63xx_wdt driver and DTS schema to allow specifying WDI logic via GPIO.
> > > >
> > > > Signed-off-by: Pali Rohár <pali@kernel.org>
> > >
> > > How is that different to just using the gpio watchdog driver ?
> >
> > GPIO watchdog driver does not support max6370 memory mapped
> > configuration.
> >
> > With this change, max6370 can use memory mapped space for watchdog
> > configuration and GPIO WDI for pinging.
> >
>
> Ok, that makes sense. Comments below.
>
> Thanks,
> Guenter
>
> > > Guenter
> > >
> > > > ---
> > > > .../bindings/watchdog/maxim,max63xx.yaml | 4 +++
> > > > drivers/watchdog/max63xx_wdt.c | 28 +++++++++++++++++++
> > > > 2 files changed, 32 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> > > > index ab9641e845db..a97aa0135ef9 100644
> > > > --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> > > > +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
> > > > @@ -27,6 +27,10 @@ properties:
> > > > description: This is a 1-byte memory-mapped address
> > > > maxItems: 1
> > > > + gpios:
> > > > + description: Optional GPIO used for controlling WDI when WDI bit is not mapped to memory
> > > > + maxItems: 1
> > > > +
> > > > required:
> > > > - compatible
> > > > - reg
>
> Devicetree patches needs to be separate.
Ok.
> > > > diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
> > > > index 9e1541cfae0d..eaf00c3f06a5 100644
> > > > --- a/drivers/watchdog/max63xx_wdt.c
> > > > +++ b/drivers/watchdog/max63xx_wdt.c
> > > > @@ -27,6 +27,7 @@
> > > > #include <linux/io.h>
> > > > #include <linux/slab.h>
> > > > #include <linux/property.h>
> > > > +#include <linux/gpio/consumer.h>
> > > > #define DEFAULT_HEARTBEAT 60
> > > > #define MAX_HEARTBEAT 60
> > > > @@ -53,6 +54,9 @@ struct max63xx_wdt {
> > > > void __iomem *base;
> > > > spinlock_t lock;
> > > > + /* GPIOs */
> > > > + struct gpio_desc *gpio_wdi;
> > > > +
> > > > /* WDI and WSET bits write access routines */
> > > > void (*ping)(struct max63xx_wdt *wdt);
> > > > void (*set)(struct max63xx_wdt *wdt, u8 set);
> > > > @@ -158,6 +162,17 @@ static const struct watchdog_info max63xx_wdt_info = {
> > > > .identity = "max63xx Watchdog",
> > > > };
> > > > +static void max63xx_gpio_ping(struct max63xx_wdt *wdt)
> > > > +{
> > > > + spin_lock(&wdt->lock);
> > > > +
> > > > + gpiod_set_value_cansleep(wdt->gpio_wdi, 1);
> > > > + udelay(1);
> > > > + gpiod_set_value_cansleep(wdt->gpio_wdi, 0);
> > > > +
> > > > + spin_unlock(&wdt->lock);
> > > > +}
> > > > +
> > > > static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
> > > > {
> > > > u8 val;
> > > > @@ -225,6 +240,19 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
> > > > return -EINVAL;
> > > > }
> > > > + wdt->gpio_wdi = devm_gpiod_get(dev, NULL, GPIOD_FLAGS_BIT_DIR_OUT);
> > > > + if (IS_ERR(wdt->gpio_wdi) && PTR_ERR(wdt->gpio_wdi) != -ENOENT) {
> > > > + if (PTR_ERR(wdt->gpio_wdi) != -EPROBE_DEFER)
> > > > + dev_err(dev, "unable to request gpio: %ld\n",
> > > > + PTR_ERR(wdt->gpio_wdi));
>
> Please use dev_err_probe().
Ok.
> > > > + return PTR_ERR(wdt->gpio_wdi);
> > > > + }
> > > > +
> > > > + if (!IS_ERR(wdt->gpio_wdi))
> > > > + wdt->ping = max63xx_gpio_ping;
> > > > + else
> > > > + wdt->gpio_wdi = NULL;
>
> Why set gpio_wdi to NULL? It isn't used if the ping function is not set.
I thought that it would be more safer to have NULL value stored in
pointer variable as opposite of some non-NULL value used for the error
reporting. But I can remove this part of the code.
> > > > +
> > > > err = max63xx_mmap_init(pdev, wdt);
>
> Doesn't this override the gpio ping function set above ?
Yes, it does. I forgot to amend local change to this patch. wdt->ping
has to be changed to gpio_ping _after_ max63xx_mmap_init call.
I will fix all those issues in v2.
> > > > if (err)
> > > > return err;
> > >
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-04-28 18:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-28 9:16 [PATCH] watchdog: max63xx_wdt: Add support for specifying WDI logic via GPIO Pali Rohár
2022-04-28 13:10 ` Guenter Roeck
2022-04-28 14:32 ` Pali Rohár
2022-04-28 15:29 ` Guenter Roeck
2022-04-28 18:25 ` Pali Rohár
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).