[PATCH 1/4] clk: qcom: clk-hfpll: use poll_timeout macro

[Ansuel Smith <ansuelsmth@gmail.com>]

Use regmap_read_poll_timeout macro instead of do-while structure to tidy
things up. Also set a timeout to prevent any sort of system stall.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/clk/qcom/clk-hfpll.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c
index e847d586a73a..7dd17c184b69 100644
--- a/drivers/clk/qcom/clk-hfpll.c
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -72,13 +72,16 @@ static void __clk_hfpll_enable(struct clk_hw *hw)
 	regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
 
 	/* Wait for PLL to lock. */
-	if (hd->status_reg) {
-		do {
-			regmap_read(regmap, hd->status_reg, &val);
-		} while (!(val & BIT(hd->lock_bit)));
-	} else {
+	if (hd->status_reg)
+		/*
+		 * Busy wait. Should never timeout, we add a timeout to
+		 * prevent any sort of stall.
+		 */
+		regmap_read_poll_timeout(regmap, hd->status_reg, val,
+					 !(val & BIT(hd->lock_bit)), 0,
+					 100 * USEC_PER_MSEC);
+	else
 		udelay(60);
-	}
 
 	/* Enable PLL output. */
 	regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
-- 
2.34.1