From: nick.hawkins@hpe.com
To: verdun@hpe.com, nick@hpe.com, joel@jms.id.au, arnd@arndb.de,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Nick Hawkins <nick.hawkins@hpe.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
linux-watchdog@vger.kernel.org
Subject: [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog
Date: Mon, 2 May 2022 15:40:45 -0500 [thread overview]
Message-ID: <20220502204050.88316-3-nick.hawkins@hpe.com> (raw)
In-Reply-To: <20220502204050.88316-1-nick.hawkins@hpe.com>
From: Nick Hawkins <nick.hawkins@hpe.com>
Adding support for the HPE GXP Watchdog. The GXP asic contains a full
compliment of timers one of which is the watchdog timer. The watchdog
timer is 16 bit and has 10ms resolution. The watchdog is created as a
child device of timer since the same register range is used.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
---
v6:
* No code change.
* Fixed commit subject line to match the ones in log.
* Adjusted commit message to be closer to 75 chars per line.
v5:
* Fixed version log
* Added details to Kconfig for module support.
* Adjusted commit messaged
v4:
* Made watchdog a child of timer as they share the same register region
per change request on dtsi.
* Removed extra parenthesis
* Fixed u8 u32 u64 usage
* Fixed alignment issue
* Reconfigured conditional statement for interrupt setup
* Removed unused gxp_wdt_remove function
v3:
* Put into proper patchset format
v2:
* No change
---
drivers/watchdog/Kconfig | 11 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/gxp-wdt.c | 166 +++++++++++++++++++++++++++++++++++++
3 files changed, 178 insertions(+)
create mode 100644 drivers/watchdog/gxp-wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c4e82a8d863f..a591cc6aa152 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1820,6 +1820,17 @@ config RALINK_WDT
help
Hardware driver for the Ralink SoC Watchdog Timer.
+config GXP_WATCHDOG
+ tristate "HPE GXP watchdog support"
+ depends on ARCH_HPE_GXP
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in HPE GXP SoCs.
+
+ To compile this driver as a module, choose M here.
+ The module will be called gxp-wdt.
+
config MT7621_WDT
tristate "Mediatek SoC watchdog"
select WATCHDOG_CORE
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f7da867e8782..e2acf3a0d0fc 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
obj-$(CONFIG_ARM_SMC_WATCHDOG) += arm_smc_wdt.o
+obj-$(CONFIG_GXP_WATCHDOG) += gxp-wdt.o
obj-$(CONFIG_VISCONTI_WATCHDOG) += visconti_wdt.o
obj-$(CONFIG_MSC313E_WATCHDOG) += msc313e_wdt.o
obj-$(CONFIG_APPLE_WATCHDOG) += apple_wdt.o
diff --git a/drivers/watchdog/gxp-wdt.c b/drivers/watchdog/gxp-wdt.c
new file mode 100644
index 000000000000..f45ab9a826d6
--- /dev/null
+++ b/drivers/watchdog/gxp-wdt.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define MASK_WDGCS_ENABLE 0x01
+#define MASK_WDGCS_RELOAD 0x04
+#define MASK_WDGCS_NMIEN 0x08
+#define MASK_WDGCS_WARN 0x80
+
+#define WDT_MAX_TIMEOUT_MS 655000
+#define WDT_DEFAULT_TIMEOUT 30
+#define SECS_TO_WDOG_TICKS(x) ((x) * 100)
+#define WDOG_TICKS_TO_SECS(x) ((x) / 100)
+
+#define GXP_WDT_CNT_OFS 0x10
+#define GXP_WDT_CTRL_OFS 0x16
+
+struct gxp_wdt {
+ void __iomem *base;
+ struct watchdog_device wdd;
+};
+
+static void gxp_wdt_enable_reload(struct gxp_wdt *drvdata)
+{
+ u8 val;
+
+ val = readb(drvdata->base + GXP_WDT_CTRL_OFS);
+ val |= (MASK_WDGCS_ENABLE | MASK_WDGCS_RELOAD);
+ writeb(val, drvdata->base + GXP_WDT_CTRL_OFS);
+}
+
+static int gxp_wdt_start(struct watchdog_device *wdd)
+{
+ struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+
+ writew(SECS_TO_WDOG_TICKS(wdd->timeout), drvdata->base + GXP_WDT_CNT_OFS);
+ gxp_wdt_enable_reload(drvdata);
+ return 0;
+}
+
+static int gxp_wdt_stop(struct watchdog_device *wdd)
+{
+ struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+ u8 val;
+
+ val = readb_relaxed(drvdata->base + GXP_WDT_CTRL_OFS);
+ val &= ~MASK_WDGCS_ENABLE;
+ writeb(val, drvdata->base + GXP_WDT_CTRL_OFS);
+ return 0;
+}
+
+static int gxp_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+ u32 actual;
+
+ wdd->timeout = timeout;
+ actual = min(timeout, wdd->max_hw_heartbeat_ms / 1000);
+ writew(SECS_TO_WDOG_TICKS(actual), drvdata->base + GXP_WDT_CNT_OFS);
+
+ return 0;
+}
+
+static unsigned int gxp_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+ struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+ u32 val = readw(drvdata->base + GXP_WDT_CNT_OFS);
+
+ return WDOG_TICKS_TO_SECS(val);
+}
+
+static int gxp_wdt_ping(struct watchdog_device *wdd)
+{
+ struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+
+ gxp_wdt_enable_reload(drvdata);
+ return 0;
+}
+
+static int gxp_restart(struct watchdog_device *wdd, unsigned long action,
+ void *data)
+{
+ struct gxp_wdt *drvdata = watchdog_get_drvdata(wdd);
+
+ writew(10, drvdata->base + GXP_WDT_CNT_OFS);
+ gxp_wdt_enable_reload(drvdata);
+ mdelay(100);
+ return 0;
+}
+
+static const struct watchdog_ops gxp_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = gxp_wdt_start,
+ .stop = gxp_wdt_stop,
+ .ping = gxp_wdt_ping,
+ .set_timeout = gxp_wdt_set_timeout,
+ .get_timeleft = gxp_wdt_get_timeleft,
+ .restart = gxp_restart,
+};
+
+static const struct watchdog_info gxp_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+ .identity = "HPE GXP Watchdog timer",
+};
+
+static int gxp_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct gxp_wdt *drvdata;
+ int err;
+ u8 val;
+
+ drvdata = devm_kzalloc(dev, sizeof(struct gxp_wdt), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ drvdata->base = (void __iomem *)dev->platform_data;
+
+ drvdata->wdd.info = &gxp_wdt_info;
+ drvdata->wdd.ops = &gxp_wdt_ops;
+ drvdata->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
+ drvdata->wdd.parent = dev;
+ drvdata->wdd.timeout = WDT_DEFAULT_TIMEOUT;
+
+ watchdog_set_drvdata(&drvdata->wdd, drvdata);
+ watchdog_set_nowayout(&drvdata->wdd, WATCHDOG_NOWAYOUT);
+
+ val = readb(drvdata->base + GXP_WDT_CTRL_OFS);
+
+ if (val & MASK_WDGCS_ENABLE)
+ set_bit(WDOG_HW_RUNNING, &drvdata->wdd.status);
+
+ watchdog_set_restart_priority(&drvdata->wdd, 128);
+
+ watchdog_stop_on_reboot(&drvdata->wdd);
+ err = devm_watchdog_register_device(dev, &drvdata->wdd);
+ if (err) {
+ dev_err(dev, "Failed to register watchdog device");
+ return err;
+ }
+
+ dev_info(dev, "HPE GXP watchdog timer");
+
+ return 0;
+}
+
+static struct platform_driver gxp_wdt_driver = {
+ .probe = gxp_wdt_probe,
+ .driver = {
+ .name = "gxp-wdt",
+ },
+};
+module_platform_driver(gxp_wdt_driver);
+
+MODULE_AUTHOR("Nick Hawkins <nick.hawkins@hpe.com>");
+MODULE_AUTHOR("Jean-Marie Verdun <verdun@hpe.com>");
+MODULE_DESCRIPTION("Driver for GXP watchdog timer");
--
2.17.1
next prev parent reply other threads:[~2022-05-02 20:39 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-02 20:40 [PATCH v6 1/8] ARM: hpe: Introduce the HPE GXP architecture nick.hawkins
2022-05-02 20:40 ` [PATCH v6 2/8] ARM: configs: multi_v7_defconfig: Add HPE GXP ARCH nick.hawkins
2022-05-02 20:40 ` nick.hawkins [this message]
2022-05-03 2:19 ` [PATCH v6 3/8] watchdog: hpe-wdt: Introduce HPE GXP Watchdog Guenter Roeck
2022-05-03 16:22 ` Hawkins, Nick
2022-05-03 16:53 ` Guenter Roeck
2022-05-03 18:51 ` Arnd Bergmann
2022-05-04 16:25 ` Hawkins, Nick
2022-05-05 21:29 ` Guenter Roeck
2022-05-02 20:40 ` [PATCH v6 4/8] clocksource/drivers/timer-gxp: Add HPE GXP Timer nick.hawkins
2022-05-03 10:34 ` Arnd Bergmann
2022-05-02 20:40 ` [PATCH v6 5/8] dt-bindings: timer: hpe,gxp-timer: Creation nick.hawkins
2022-05-03 9:58 ` Krzysztof Kozlowski
2022-05-03 17:39 ` Rob Herring
2022-05-02 20:40 ` [PATCH v6 6/8] dt-bindings: arm: hpe: add GXP Support nick.hawkins
2022-05-03 9:59 ` Krzysztof Kozlowski
2022-05-03 17:40 ` Rob Herring
2022-05-02 20:40 ` [PATCH v6 7/8] ARM: dts: Introduce HPE GXP Device tree nick.hawkins
2022-05-03 10:00 ` Krzysztof Kozlowski
2022-05-03 14:08 ` Hawkins, Nick
2022-05-03 10:45 ` Arnd Bergmann
2022-05-03 15:07 ` Hawkins, Nick
2022-05-03 18:19 ` Arnd Bergmann
2022-05-02 20:40 ` [PATCH v6 8/8] MAINTAINERS: Introduce HPE GXP Architecture nick.hawkins
2022-05-03 10:05 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220502204050.88316-3-nick.hawkins@hpe.com \
--to=nick.hawkins@hpe.com \
--cc=arnd@arndb.de \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=nick@hpe.com \
--cc=verdun@hpe.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).