* [PATCH V2 0/3] arm64: add i.MX93 support
@ 2022-05-03 12:29 Peng Fan (OSS)
2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS)
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Peng Fan (OSS) @ 2022-05-03 12:29 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer
Cc: kernel, festevam, linux-imx, devicetree, linux-kernel,
linux-arm-kernel, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
V2:
Update License
Add i.MX93 dtsi and 11x11 evk board support
The required bindings and drivers has already been in tree.
There arem checkpatch error for the pin header files as other i.MX pin
pin header files.
Peng Fan (3):
arm64: dts: freescale: Add i.MX93 dtsi support
arm64: dts: freescale: add i.MX93 11x11 EVK basic support
arm64: defconfig: enable i.MX93 clk & pinctrl
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/imx93-11x11-evk.dts | 130 ++++
arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 ++++++++++++++++++
arch/arm64/boot/dts/freescale/imx93.dtsi | 337 ++++++++++
arch/arm64/configs/defconfig | 2 +
5 files changed, 1093 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h
create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi
--
2.25.1
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support 2022-05-03 12:29 [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan (OSS) @ 2022-05-03 12:29 ` Peng Fan (OSS) 2022-05-05 3:19 ` Rob Herring 2022-05-05 8:44 ` Shawn Guo 2022-05-03 12:29 ` [PATCH V2 2/3] arm64: dts: freescale: add i.MX93 11x11 EVK basic support Peng Fan (OSS) ` (2 subsequent siblings) 3 siblings, 2 replies; 11+ messages in thread From: Peng Fan (OSS) @ 2022-05-03 12:29 UTC (permalink / raw) To: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer Cc: kernel, festevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, Peng Fan From: Peng Fan <peng.fan@nxp.com> The i.MX 93 applications processors are the first in the i.MX portfolio to integrate the scalable Arm Cortex-A55 core, bringing performance and energy efficiency to Linux-based edge applications and the Arm Ethos-U65 microNPU, enabling developers to create more capable, cost-effective and energy-efficient ML applications. Add the basic dtsi support for i.MX93. Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx93.dtsi | 337 ++++++++++ 2 files changed, 960 insertions(+) create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi diff --git a/arch/arm64/boot/dts/freescale/imx93-pinfunc.h b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h new file mode 100755 index 000000000000..4298a145f8a9 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-pinfunc.h @@ -0,0 +1,623 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright 2022 NXP + */ + +#ifndef __DTS_IMX93_PINFUNC_H +#define __DTS_IMX93_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01B0 0x03D8 0x0 0x0 +#define MX93_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01B0 0x0000 0x1 0x0 +#define MX93_PAD_DAP_TDI__CAN2_TX 0x0000 0x01B0 0x0000 0x3 0x0 +#define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01B0 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01B0 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01B0 0x0430 0x6 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01B4 0x03DC 0x0 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01B4 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01B4 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01B4 0x0000 0x6 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01B8 0x03D4 0x0 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01B8 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01B8 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01B8 0x042C 0x6 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000C 0x01BC 0x0000 0x0 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000C 0x01BC 0x0000 0x1 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000C 0x01BC 0x0364 0x3 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000C 0x01BC 0x0000 0x4 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000C 0x01BC 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x01BC 0x0434 0x6 0x0 +#define MX93_PAD_GPIO_IO00__GPIO2_IO00 0x0010 0x01C0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01C0 0x03E4 0x11 0x0 +#define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01C0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01C0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01C0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01C0 0x0434 0x5 0x1 +#define MX93_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01C0 0x03EC 0x16 0x0 +#define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00 0x0010 0x01C0 0x036C 0x7 0x0 +#define MX93_PAD_GPIO_IO01__GPIO2_IO01 0x0014 0x01C4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01C4 0x03E0 0x11 0x0 +#define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00 0x0014 0x01C4 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01C4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01C4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01C4 0x0430 0x5 0x1 +#define MX93_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01C4 0x03E8 0x16 0x0 +#define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01 0x0014 0x01C4 0x0370 0x7 0x0 +#define MX93_PAD_GPIO_IO02__GPIO2_IO02 0x0018 0x01C8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01C8 0x0000 0x11 0x0 +#define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01C8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01C8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01C8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01C8 0x042C 0x5 0x1 +#define MX93_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01C8 0x03F4 0x16 0x0 +#define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02 0x0018 0x01C8 0x0374 0x7 0x0 +#define MX93_PAD_GPIO_IO03__GPIO2_IO03 0x001C 0x01CC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x01CC 0x0000 0x11 0x0 +#define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001C 0x01CC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001C 0x01CC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x001C 0x01CC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO03__LPUART5_RTS_B 0x001C 0x01CC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x01CC 0x03F0 0x16 0x0 +#define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03 0x001C 0x01CC 0x0378 0x7 0x0 +#define MX93_PAD_GPIO_IO04__GPIO2_IO04 0x0020 0x01D0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01D0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO04__PDM_CLK 0x0020 0x01D0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x0020 0x01D0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01D0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01D0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01D0 0x03F4 0x16 0x1 +#define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04 0x0020 0x01D0 0x037C 0x7 0x0 +#define MX93_PAD_GPIO_IO05__GPIO2_IO05 0x0024 0x01D4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01D4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00 0x0024 0x01D4 0x0438 0x2 0x0 +#define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x0024 0x01D4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01D4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01D4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01D4 0x03F0 0x16 0x1 +#define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05 0x0024 0x01D4 0x0380 0x7 0x0 +#define MX93_PAD_GPIO_IO06__GPIO2_IO06 0x0028 0x01D8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01D8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01 0x0028 0x01D8 0x043C 0x2 0x0 +#define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x0028 0x01D8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01D8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01D8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01D8 0x03FC 0x16 0x0 +#define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06 0x0028 0x01D8 0x0384 0x7 0x0 +#define MX93_PAD_GPIO_IO07__GPIO2_IO07 0x002C 0x01DC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO07__LPSPI3_PCS1 0x002C 0x01DC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA01 0x002C 0x01DC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x002C 0x01DC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO07__LPSPI7_SCK 0x002C 0x01DC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x002C 0x01DC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x01DC 0x03F8 0x16 0x0 +#define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07 0x002C 0x01DC 0x0388 0x7 0x0 +#define MX93_PAD_GPIO_IO08__GPIO2_IO08 0x0030 0x01E0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01E0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA02 0x0030 0x01E0 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x0030 0x01E0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01E0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01E0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01E0 0x03FC 0x16 0x1 +#define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08 0x0030 0x01E0 0x038C 0x7 0x0 +#define MX93_PAD_GPIO_IO09__GPIO2_IO09 0x0034 0x01E4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01E4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA03 0x0034 0x01E4 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x0034 0x01E4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01E4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01E4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01E4 0x03F8 0x16 0x1 +#define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09 0x0034 0x01E4 0x0390 0x7 0x0 +#define MX93_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01E8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01E8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA04 0x0038 0x01E8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x0038 0x01E8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01E8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01E8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01E8 0x0404 0x16 0x0 +#define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01E8 0x0394 0x7 0x0 +#define MX93_PAD_GPIO_IO11__GPIO2_IO11 0x003C 0x01EC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO11__LPSPI3_SCK 0x003C 0x01EC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA05 0x003C 0x01EC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x003C 0x01EC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO11__TPM5_EXTCLK 0x003C 0x01EC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x003C 0x01EC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x01EC 0x0400 0x16 0x0 +#define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003C 0x01EC 0x0398 0x7 0x0 +#define MX93_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01F0 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01F0 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02 0x0040 0x01F0 0x0440 0x2 0x0 +#define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x0040 0x01F0 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01F0 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01F0 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01F0 0x0404 0x16 0x1 +#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01F0 0x0450 0x7 0x0 +#define MX93_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01F4 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01F4 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03 0x0044 0x01F4 0x0444 0x2 0x0 +#define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x0044 0x01F4 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01F4 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01F4 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01F4 0x0400 0x16 0x1 +#define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01F4 0x039C 0x7 0x0 +#define MX93_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01F8 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01F8 0x041C 0x1 0x0 +#define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06 0x0048 0x01F8 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01F8 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01F8 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01F8 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01F8 0x0428 0x6 0x0 +#define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01F8 0x03A0 0x7 0x0 +#define MX93_PAD_GPIO_IO15__GPIO2_IO15 0x004C 0x01FC 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x01FC 0x0418 0x1 0x0 +#define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07 0x004C 0x01FC 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004C 0x01FC 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x004C 0x01FC 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO15__LPUART8_RTS_B 0x004C 0x01FC 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x01FC 0x0424 0x6 0x0 +#define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004C 0x01FC 0x03A4 0x7 0x0 +#define MX93_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02 0x0050 0x0200 0x0440 0x2 0x1 +#define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x0414 0x4 0x0 +#define MX93_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0420 0x6 0x0 +#define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03A8 0x7 0x0 +#define MX93_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA08 0x0054 0x0204 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13 0x0054 0x0204 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO17__LPUART3_RTS_B 0x0054 0x0204 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO17__LPSPI4_PCS1 0x0054 0x0204 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03AC 0x7 0x0 +#define MX93_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x044C 0x1 0x0 +#define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09 0x0058 0x0208 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO18__LPSPI4_PCS0 0x0058 0x0208 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03B0 0x7 0x0 +#define MX93_PAD_GPIO_IO19__GPIO2_IO19 0x005C 0x020C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x020C 0x0450 0x1 0x1 +#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03 0x005C 0x020C 0x0444 0x2 0x1 +#define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005C 0x020C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO19__LPSPI5_SIN 0x005C 0x020C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO19__LPSPI4_SIN 0x005C 0x020C 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO19__TPM6_CH2 0x005C 0x020C 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x005C 0x020C 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x0060 0x0210 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00 0x0060 0x0210 0x0438 0x2 0x1 +#define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO20__TPM3_CH1 0x0060 0x0210 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO20__FLEXIO1_FLEXIO20 0x0060 0x0210 0x03B4 0x7 0x0 +#define MX93_PAD_GPIO_IO21__GPIO2_IO21 0x0064 0x0214 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO21__SAI3_TX_DATA00 0x0064 0x0214 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO21__PDM_CLK 0x0064 0x0214 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17 0x0064 0x0214 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x044C 0x7 0x1 +#define MX93_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x0458 0x1 0x0 +#define MX93_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x0454 0x2 0x0 +#define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x03EC 0x16 0x1 +#define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03B8 0x7 0x0 +#define MX93_PAD_GPIO_IO23__GPIO2_IO23 0x006C 0x021C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x021C 0x045C 0x1 0x0 +#define MX93_PAD_GPIO_IO23__SPDIF_OUT 0x006C 0x021C 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006C 0x021C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO23__TPM6_CH1 0x006C 0x021C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x021C 0x03E8 0x16 0x1 +#define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006C 0x021C 0x03BC 0x7 0x0 +#define MX93_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x0460 0x1 0x0 +#define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x5 0x0 +#define MX93_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03C0 0x7 0x0 +#define MX93_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x0464 0x1 0x0 +#define MX93_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x2 0x0 +#define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03D4 0x5 0x1 +#define MX93_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03C4 0x7 0x0 +#define MX93_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x0468 0x1 0x0 +#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01 0x0078 0x0228 0x043C 0x2 0x1 +#define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03D8 0x5 0x1 +#define MX93_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO27__GPIO2_IO27 0x007C 0x022C 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x022C 0x046C 0x1 0x0 +#define MX93_PAD_GPIO_IO27__CAN2_RX 0x007C 0x022C 0x0364 0x2 0x1 +#define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007C 0x022C 0x0000 0x3 0x0 +#define MX93_PAD_GPIO_IO27__TPM6_CH3 0x007C 0x022C 0x0000 0x4 0x0 +#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x022C 0x03DC 0x5 0x1 +#define MX93_PAD_GPIO_IO27__LPSPI5_PCS1 0x007C 0x022C 0x0000 0x6 0x0 +#define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007C 0x022C 0x03C8 0x7 0x0 +#define MX93_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03E4 0x11 0x1 +#define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x7 0x0 +#define MX93_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x0 0x0 +#define MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03E0 0x11 0x1 +#define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x7 0x0 +#define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x0088 0x0238 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x008C 0x023C 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2 0x008C 0x023C 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008C 0x023C 0x03C8 0x4 0x1 +#define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x5 0x0 +#define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x0 0x0 +#define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x4 0x0 +#define MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x0098 0x0248 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03CC 0x2 0x0 +#define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00 0x0098 0x0248 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_MDC__GPIO4_IO00 0x0098 0x0248 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009C 0x024C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009C 0x024C 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_MDIO__I3C2_SDA 0x009C 0x024C 0x03D0 0x2 0x0 +#define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009C 0x024C 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01 0x009C 0x024C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x009C 0x024C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x00A0 0x0250 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD3__CAN2_TX 0x00A0 0x0250 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_TD3__HSIOMIX_OTG_ID2 0x00A0 0x0250 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD3__FLEXIO2_FLEXIO02 0x00A0 0x0250 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD3__GPIO4_IO02 0x00A0 0x0250 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x00A4 0x0254 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x00A4 0x0254 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TD2__CAN2_RX 0x00A4 0x0254 0x0364 0x2 0x2 +#define MX93_PAD_ENET1_TD2__HSIOMIX_OTG_OC2 0x00A4 0x0254 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD2__FLEXIO2_FLEXIO03 0x00A4 0x0254 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD2__GPIO4_IO03 0x00A4 0x0254 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x00A8 0x0258 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD1__LPUART3_RTS_B 0x00A8 0x0258 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TD1__I3C2_PUR 0x00A8 0x0258 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_TD1__HSIOMIX_OTG_OC1 0x00A8 0x0258 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_TD1__FLEXIO2_FLEXIO04 0x00A8 0x0258 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD1__GPIO4_IO04 0x00A8 0x0258 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TD1__I3C2_PUR_B 0x00A8 0x0258 0x0000 0x6 0x0 +#define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00AC 0x025C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TD0__LPUART3_TX 0x00AC 0x025C 0x041C 0x1 0x1 +#define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05 0x00AC 0x025C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TD0__GPIO4_IO05 0x00AC 0x025C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00B0 0x0260 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TX_CTL__LPUART3_DTR_B 0x00B0 0x0260 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO06 0x00B0 0x0260 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TX_CTL__GPIO4_IO06 0x00B0 0x0260 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x00B4 0x0264 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_TXC__ENET_QOS_TX_ER 0x00B4 0x0264 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_TXC__FLEXIO2_FLEXIO07 0x00B4 0x0264 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_TXC__GPIO4_IO07 0x00B4 0x0264 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x00B8 0x0268 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RX_CTL__LPUART3_DSR_B 0x00B8 0x0268 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2 0x00B8 0x0268 0x0000 0x3 0x0 +#define MX93_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO08 0x00B8 0x0268 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RX_CTL__GPIO4_IO08 0x00B8 0x0268 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x00BC 0x026C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x00BC 0x026C 0x0000 0x1 0x0 +#define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09 0x00BC 0x026C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RXC__GPIO4_IO09 0x00BC 0x026C 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00C0 0x0270 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD0__LPUART3_RX 0x00C0 0x0270 0x0418 0x1 0x1 +#define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00C0 0x0270 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD0__GPIO4_IO10 0x00C0 0x0270 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00C4 0x0274 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B 0x00C4 0x0274 0x0414 0x1 0x1 +#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1 0x00C4 0x0274 0x0408 0x3 0x0 +#define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00C4 0x0274 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD1__GPIO4_IO11 0x00C4 0x0274 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00C8 0x0278 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2 0x00C8 0x0278 0x040C 0x3 0x0 +#define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00C8 0x0278 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD2__GPIO4_IO12 0x00C8 0x0278 0x0000 0x5 0x0 +#define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00CC 0x027C 0x0000 0x0 0x0 +#define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00CC 0x027C 0x0000 0x2 0x0 +#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3 0x00CC 0x027C 0x0410 0x3 0x0 +#define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00CC 0x027C 0x0000 0x4 0x0 +#define MX93_PAD_ENET1_RD3__GPIO4_IO13 0x00CC 0x027C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_MDC__ENET1_MDC 0x00D0 0x0280 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_MDC__LPUART4_DCB_B 0x00D0 0x0280 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_MDC__SAI2_RX_SYNC 0x00D0 0x0280 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_MDC__FLEXIO2_FLEXIO14 0x00D0 0x0280 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_MDC__GPIO4_IO14 0x00D0 0x0280 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x00D4 0x0284 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_MDIO__LPUART4_RIN_B 0x00D4 0x0284 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_MDIO__SAI2_RX_BCLK 0x00D4 0x0284 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15 0x00D4 0x0284 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x00D4 0x0284 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD3__SAI2_RX_DATA00 0x00D8 0x0288 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD3__FLEXIO2_FLEXIO16 0x00D8 0x0288 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD3__GPIO4_IO16 0x00D8 0x0288 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x00D8 0x0288 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x00DC 0x028C 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x00DC 0x028C 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TD2__SAI2_RX_DATA01 0x00DC 0x028C 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD2__FLEXIO2_FLEXIO17 0x00DC 0x028C 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD2__GPIO4_IO17 0x00DC 0x028C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x00E0 0x0290 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD1__LPUART4_RTS_B 0x00E0 0x0290 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TD1__SAI2_RX_DATA02 0x00E0 0x0290 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00E0 0x0290 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD1__GPIO4_IO18 0x00E0 0x0290 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x00E4 0x0294 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TD0__LPUART4_TX 0x00E4 0x0294 0x0428 0x1 0x1 +#define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03 0x00E4 0x0294 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00E4 0x0294 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TD0__GPIO4_IO19 0x00E4 0x0294 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x00E8 0x0298 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TX_CTL__LPUART4_DTR_B 0x00E8 0x0298 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TX_CTL__SAI2_TX_SYNC 0x00E8 0x0298 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20 0x00E8 0x0298 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TX_CTL__GPIO4_IO20 0x00E8 0x0298 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x00EC 0x029C 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_TXC__ENET1_TX_ER 0x00EC 0x029C 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_TXC__SAI2_TX_BCLK 0x00EC 0x029C 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_TXC__FLEXIO2_FLEXIO21 0x00EC 0x029C 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_TXC__GPIO4_IO21 0x00EC 0x029C 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x00F0 0x02A0 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RX_CTL__LPUART4_DSR_B 0x00F0 0x02A0 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RX_CTL__SAI2_TX_DATA00 0x00F0 0x02A0 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22 0x00F0 0x02A0 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RX_CTL__GPIO4_IO22 0x00F0 0x02A0 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x00F4 0x02A4 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x00F4 0x02A4 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RXC__SAI2_TX_DATA01 0x00F4 0x02A4 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00F4 0x02A4 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RXC__GPIO4_IO23 0x00F4 0x02A4 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x00F8 0x02A8 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD0__LPUART4_RX 0x00F8 0x02A8 0x0424 0x1 0x1 +#define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02 0x00F8 0x02A8 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00F8 0x02A8 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD0__GPIO4_IO24 0x00F8 0x02A8 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x00FC 0x02AC 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD1__SPDIF_IN 0x00FC 0x02AC 0x0454 0x1 0x1 +#define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03 0x00FC 0x02AC 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00FC 0x02AC 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD1__GPIO4_IO25 0x00FC 0x02AC 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x0100 0x02B0 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02B0 0x0420 0x1 0x1 +#define MX93_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02B0 0x0000 0x2 0x0 +#define MX93_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02B0 0x0000 0x3 0x0 +#define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02B0 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02B0 0x0000 0x5 0x0 +#define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x0104 0x02B4 0x0000 0x0 0x0 +#define MX93_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02B4 0x0000 0x1 0x0 +#define MX93_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02B4 0x0454 0x2 0x2 +#define MX93_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02B4 0x0000 0x3 0x0 +#define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02B4 0x0000 0x4 0x0 +#define MX93_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02B4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_CLK__FLEXIO1_FLEXIO08 0x0108 0x02B8 0x038C 0x4 0x1 +#define MX93_PAD_SD1_CLK__GPIO3_IO08 0x0108 0x02B8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_CLK__USDHC1_CLK 0x0108 0x02B8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_CMD__USDHC1_CMD 0x010C 0x02BC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_CMD__FLEXIO1_FLEXIO09 0x010C 0x02BC 0x0390 0x4 0x1 +#define MX93_PAD_SD1_CMD__GPIO3_IO09 0x010C 0x02BC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x0110 0x02C0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA0__FLEXIO1_FLEXIO10 0x0110 0x02C0 0x0394 0x4 0x1 +#define MX93_PAD_SD1_DATA0__GPIO3_IO10 0x0110 0x02C0 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x0114 0x02C4 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA1__FLEXIO1_FLEXIO11 0x0114 0x02C4 0x0398 0x4 0x1 +#define MX93_PAD_SD1_DATA1__GPIO3_IO11 0x0114 0x02C4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT 0x0114 0x02C4 0x0000 0x6 0x0 +#define MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x0118 0x02C8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA2__FLEXIO1_FLEXIO12 0x0118 0x02C8 0x0000 0x4 0x0 +#define MX93_PAD_SD1_DATA2__GPIO3_IO12 0x0118 0x02C8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY 0x0118 0x02C8 0x0000 0x6 0x0 +#define MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x011C 0x02CC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x011C 0x02CC 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA3__FLEXIO1_FLEXIO13 0x011C 0x02CC 0x039C 0x4 0x1 +#define MX93_PAD_SD1_DATA3__GPIO3_IO13 0x011C 0x02CC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x0120 0x02D0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04 0x0120 0x02D0 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA4__FLEXIO1_FLEXIO14 0x0120 0x02D0 0x03A0 0x4 0x1 +#define MX93_PAD_SD1_DATA4__GPIO3_IO14 0x0120 0x02D0 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x0124 0x02D4 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05 0x0124 0x02D4 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA5__USDHC1_RESET_B 0x0124 0x02D4 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA5__FLEXIO1_FLEXIO15 0x0124 0x02D4 0x03A4 0x4 0x1 +#define MX93_PAD_SD1_DATA5__GPIO3_IO15 0x0124 0x02D4 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x0128 0x02D8 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06 0x0128 0x02D8 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA6__USDHC1_CD_B 0x0128 0x02D8 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA6__FLEXIO1_FLEXIO16 0x0128 0x02D8 0x03A8 0x4 0x1 +#define MX93_PAD_SD1_DATA6__GPIO3_IO16 0x0128 0x02D8 0x0000 0x5 0x0 +#define MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x012C 0x02DC 0x0000 0x0 0x0 +#define MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07 0x012C 0x02DC 0x0000 0x1 0x0 +#define MX93_PAD_SD1_DATA7__USDHC1_WP 0x012C 0x02DC 0x0000 0x2 0x0 +#define MX93_PAD_SD1_DATA7__FLEXIO1_FLEXIO17 0x012C 0x02DC 0x03AC 0x4 0x1 +#define MX93_PAD_SD1_DATA7__GPIO3_IO17 0x012C 0x02DC 0x0000 0x5 0x0 +#define MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x0130 0x02E0 0x0000 0x0 0x0 +#define MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x0130 0x02E0 0x0000 0x1 0x0 +#define MX93_PAD_SD1_STROBE__FLEXIO1_FLEXIO18 0x0130 0x02E0 0x03B0 0x4 0x1 +#define MX93_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02E0 0x0000 0x5 0x0 +#define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02E4 0x0000 0x0 0x0 +#define MX93_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02E4 0x0000 0x1 0x0 +#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02E4 0x0410 0x2 0x1 +#define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02E4 0x0000 0x4 0x0 +#define MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02E4 0x0000 0x5 0x0 +#define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02E4 0x0368 0x6 0x0 +#define MX93_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02E8 0x0458 0x0 0x1 +#define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02E8 0x0000 0x1 0x0 +#define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02E8 0x03B4 0x4 0x1 +#define MX93_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02E8 0x0000 0x5 0x0 +#define MX93_PAD_SD3_CMD__USDHC3_CMD 0x013C 0x02EC 0x045C 0x0 0x1 +#define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013C 0x02EC 0x0000 0x1 0x0 +#define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013C 0x02EC 0x0000 0x4 0x0 +#define MX93_PAD_SD3_CMD__GPIO3_IO21 0x013C 0x02EC 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02F0 0x0460 0x0 0x1 +#define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x0140 0x02F0 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02F0 0x03B8 0x4 0x1 +#define MX93_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02F0 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02F4 0x0464 0x0 0x1 +#define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x0144 0x02F4 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02F4 0x03BC 0x4 0x1 +#define MX93_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02F4 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02F8 0x0468 0x0 0x1 +#define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x0148 0x02F8 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02F8 0x03C0 0x4 0x1 +#define MX93_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02F8 0x0000 0x5 0x0 +#define MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x014C 0x02FC 0x046C 0x0 0x1 +#define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x014C 0x02FC 0x0000 0x1 0x0 +#define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014C 0x02FC 0x03C4 0x4 0x1 +#define MX93_PAD_SD3_DATA3__GPIO3_IO25 0x014C 0x02FC 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03CC 0x2 0x1 +#define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00 0x0150 0x0300 0x036C 0x4 0x1 +#define MX93_PAD_SD2_CD_B__GPIO3_IO00 0x0150 0x0300 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03D0 0x2 0x1 +#define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01 0x0154 0x0304 0x0370 0x4 0x1 +#define MX93_PAD_SD2_CLK__GPIO3_IO01 0x0154 0x0304 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x6 0x0 +#define MX93_PAD_SD2_CMD__USDHC2_CMD 0x0158 0x0308 0x0000 0x0 0x0 +#define MX93_PAD_SD2_CMD__ENET1_1588_EVENT0_IN 0x0158 0x0308 0x0000 0x1 0x0 +#define MX93_PAD_SD2_CMD__I3C2_PUR 0x0158 0x0308 0x0000 0x2 0x0 +#define MX93_PAD_SD2_CMD__I3C2_PUR_B 0x0158 0x0308 0x0000 0x3 0x0 +#define MX93_PAD_SD2_CMD__FLEXIO1_FLEXIO02 0x0158 0x0308 0x0374 0x4 0x1 +#define MX93_PAD_SD2_CMD__GPIO3_IO02 0x0158 0x0308 0x0000 0x5 0x0 +#define MX93_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1 0x0158 0x0308 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x015C 0x030C 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA0__ENET1_1588_EVENT0_OUT 0x015C 0x030C 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA0__CAN2_TX 0x015C 0x030C 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA0__FLEXIO1_FLEXIO03 0x015C 0x030C 0x0378 0x4 0x1 +#define MX93_PAD_SD2_DATA0__GPIO3_IO03 0x015C 0x030C 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2 0x015C 0x030C 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x0160 0x0310 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA1__ENET1_1588_EVENT1_IN 0x0160 0x0310 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA1__CAN2_RX 0x0160 0x0310 0x0364 0x2 0x3 +#define MX93_PAD_SD2_DATA1__FLEXIO1_FLEXIO04 0x0160 0x0310 0x037C 0x4 0x1 +#define MX93_PAD_SD2_DATA1__GPIO3_IO04 0x0160 0x0310 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT 0x0160 0x0310 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x0164 0x0314 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA2__ENET1_1588_EVENT1_OUT 0x0164 0x0314 0x0000 0x1 0x0 +#define MX93_PAD_SD2_DATA2__MQS2_RIGHT 0x0164 0x0314 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA2__FLEXIO1_FLEXIO05 0x0164 0x0314 0x0380 0x4 0x1 +#define MX93_PAD_SD2_DATA2__GPIO3_IO05 0x0164 0x0314 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x6 0x0 +#define MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x0 0x0 +#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0408 0x1 0x1 +#define MX93_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x2 0x0 +#define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06 0x0168 0x0318 0x0384 0x4 0x1 +#define MX93_PAD_SD2_DATA3__GPIO3_IO06 0x0168 0x0318 0x0000 0x5 0x0 +#define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x6 0x0 +#define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016C 0x031C 0x0000 0x0 0x0 +#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016C 0x031C 0x040C 0x1 0x1 +#define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07 0x016C 0x031C 0x0388 0x4 0x1 +#define MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x016C 0x031C 0x0000 0x5 0x0 +#define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016C 0x031C 0x0000 0x6 0x0 +#define MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x0000 0x10 0x0 +#define MX93_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x1 0x0 +#define MX93_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x2 0x0 +#define MX93_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x3 0x0 +#define MX93_PAD_I2C1_SCL__GPIO1_IO00 0x0170 0x0320 0x0000 0x5 0x0 +#define MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x0000 0x10 0x0 +#define MX93_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x1 0x0 +#define MX93_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x2 0x0 +#define MX93_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x3 0x0 +#define MX93_PAD_I2C1_SDA__GPIO1_IO01 0x0174 0x0324 0x0000 0x5 0x0 +#define MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x0000 0x10 0x0 +#define MX93_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x1 0x0 +#define MX93_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x2 0x0 +#define MX93_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x3 0x0 +#define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x4 0x0 +#define MX93_PAD_I2C2_SCL__GPIO1_IO02 0x0178 0x0328 0x0000 0x5 0x0 +#define MX93_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x6 0x0 +#define MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x017C 0x032C 0x0000 0x10 0x0 +#define MX93_PAD_I2C2_SDA__LPUART2_RIN_B 0x017C 0x032C 0x0000 0x2 0x0 +#define MX93_PAD_I2C2_SDA__TPM2_CH3 0x017C 0x032C 0x0000 0x3 0x0 +#define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017C 0x032C 0x0000 0x4 0x0 +#define MX93_PAD_I2C2_SDA__GPIO1_IO03 0x017C 0x032C 0x0000 0x5 0x0 +#define MX93_PAD_UART1_RXD__LPUART1_RX 0x0180 0x0330 0x0000 0x0 0x0 +#define MX93_PAD_UART1_RXD__S400_UART_RX 0x0180 0x0330 0x0000 0x1 0x0 +#define MX93_PAD_UART1_RXD__LPSPI2_SIN 0x0180 0x0330 0x0000 0x2 0x0 +#define MX93_PAD_UART1_RXD__TPM1_CH0 0x0180 0x0330 0x0000 0x3 0x0 +#define MX93_PAD_UART1_RXD__GPIO1_IO04 0x0180 0x0330 0x0000 0x5 0x0 +#define MX93_PAD_UART1_TXD__LPUART1_TX 0x0184 0x0334 0x0000 0x0 0x0 +#define MX93_PAD_UART1_TXD__S400_UART_TX 0x0184 0x0334 0x0000 0x1 0x0 +#define MX93_PAD_UART1_TXD__LPSPI2_PCS0 0x0184 0x0334 0x0000 0x2 0x0 +#define MX93_PAD_UART1_TXD__TPM1_CH1 0x0184 0x0334 0x0000 0x3 0x0 +#define MX93_PAD_UART1_TXD__GPIO1_IO05 0x0184 0x0334 0x0000 0x5 0x0 +#define MX93_PAD_UART2_RXD__LPUART2_RX 0x0188 0x0338 0x0000 0x0 0x0 +#define MX93_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0000 0x1 0x0 +#define MX93_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0000 0x2 0x0 +#define MX93_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x3 0x0 +#define MX93_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x0448 0x4 0x0 +#define MX93_PAD_UART2_RXD__GPIO1_IO06 0x0188 0x0338 0x0000 0x5 0x0 +#define MX93_PAD_UART2_TXD__LPUART2_TX 0x018C 0x033C 0x0000 0x0 0x0 +#define MX93_PAD_UART2_TXD__LPUART1_RTS_B 0x018C 0x033C 0x0000 0x1 0x0 +#define MX93_PAD_UART2_TXD__LPSPI2_SCK 0x018C 0x033C 0x0000 0x2 0x0 +#define MX93_PAD_UART2_TXD__TPM1_CH3 0x018C 0x033C 0x0000 0x3 0x0 +#define MX93_PAD_UART2_TXD__GPIO1_IO07 0x018C 0x033C 0x0000 0x5 0x0 +#define MX93_PAD_PDM_CLK__PDM_CLK 0x0190 0x0340 0x0000 0x0 0x0 +#define MX93_PAD_PDM_CLK__MQS1_LEFT 0x0190 0x0340 0x0000 0x1 0x0 +#define MX93_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x4 0x0 +#define MX93_PAD_PDM_CLK__GPIO1_IO08 0x0190 0x0340 0x0000 0x5 0x0 +#define MX93_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x6 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x0194 0x0344 0x0438 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x1 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0000 0x2 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x3 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x4 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x0194 0x0344 0x0000 0x5 0x0 +#define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x6 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x0198 0x0348 0x043C 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI 0x0198 0x0348 0x0000 0x1 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0000 0x2 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x3 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3 0x0198 0x0348 0x0000 0x4 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x0198 0x0348 0x0000 0x5 0x0 +#define MX93_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1 0x0198 0x0348 0x0368 0x6 0x1 +#define MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x019C 0x034C 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXFS__SAI1_TX_DATA01 0x019C 0x034C 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXFS__LPSPI1_PCS0 0x019C 0x034C 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXFS__LPUART2_DTR_B 0x019C 0x034C 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXFS__MQS1_LEFT 0x019C 0x034C 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x019C 0x034C 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x01A0 0x0350 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXC__LPUART2_CTS_B 0x01A0 0x0350 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x01A0 0x0350 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXC__LPUART1_DSR_B 0x01A0 0x0350 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXC__CAN1_RX 0x01A0 0x0350 0x0360 0x4 0x1 +#define MX93_PAD_SAI1_TXC__GPIO1_IO12 0x01A0 0x0350 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x01A4 0x0354 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x01A4 0x0354 0x0000 0x1 0x0 +#define MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x01A4 0x0354 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_TXD0__LPUART1_DTR_B 0x01A4 0x0354 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_TXD0__CAN1_TX 0x01A4 0x0354 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x01A4 0x0354 0x0000 0x5 0x0 +#define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x01A8 0x0358 0x0000 0x0 0x0 +#define MX93_PAD_SAI1_RXD0__SAI1_MCLK 0x01A8 0x0358 0x0448 0x1 0x1 +#define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01A8 0x0358 0x0000 0x2 0x0 +#define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01A8 0x0358 0x0000 0x3 0x0 +#define MX93_PAD_SAI1_RXD0__MQS1_RIGHT 0x01A8 0x0358 0x0000 0x4 0x0 +#define MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x01A8 0x0358 0x0000 0x5 0x0 +#define MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x01AC 0x035C 0x0000 0x0 0x0 +#define MX93_PAD_WDOG_ANY__GPIO1_IO15 0x01AC 0x035C 0x0000 0x5 0x0 + +#endif /* __DTS_IMX93_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi new file mode 100644 index 000000000000..ae8daffe3492 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +#include <dt-bindings/clock/imx93-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx93-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + serial5 = &lpuart6; + serial6 = &lpuart7; + serial7 = &lpuart8; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + A55_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + A55_1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + }; + + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,no-tick-in-suspend; + interrupt-parent = <&gic>; + }; + + gic: interrupt-controller@48000000 { + compatible = "arm,gic-v3"; + reg = <0 0x48000000 0 0x10000>, + <0 0x48040000 0 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x80000000>, + <0x28000000 0x0 0x28000000 0x10000000>; + + aips1: bus@44000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x44000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu1: mailbox@44230000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x44230000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + system_counter: timer@44290000 { + compatible = "nxp,sysctr-timer"; + reg = <0x44290000 0x30000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; + + lpuart1: serial@44380000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x44380000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART1_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@44390000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x44390000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART2_GATE>; + clock-names = "ipg"; + status = "okay"; + }; + + iomuxc: pinctrl@443c0000 { + compatible = "fsl,imx93-iomuxc"; + reg = <0x443c0000 0x10000>; + }; + + clk: clock-controller@44450000 { + compatible = "fsl,imx93-ccm"; + reg = <0x44450000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; + clock-names = "osc_32k", "osc_24m", "clk_ext1"; + status = "okay"; + }; + + anatop: anatop@44480000 { + compatible = "fsl,imx93-anatop", "syscon"; + reg = <0x44480000 0x10000>; + }; + }; + + aips2: bus@42000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mu2: mailbox@42440000 { + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; + reg = <0x42440000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lpuart3: serial@42570000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42570000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART3_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@42580000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42580000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART4_GATE>; + clock-names = "ipg"; + status = "okay"; + }; + + lpuart5: serial@42590000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42590000 0x1000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART5_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart6: serial@425a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x425a0000 0x1000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART6_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart7: serial@42690000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x42690000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART7_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart8: serial@426a0000 { + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; + reg = <0x426a0000 0x1000>; + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPUART8_GATE>; + clock-names = "ipg"; + status = "disabled"; + }; + }; + + aips3: bus@42800000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x42800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usdhc1: mmc@42850000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42850000 0x10000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC1_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <8>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc2: mmc@42860000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x42860000 0x10000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC2_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + + usdhc3: mmc@428b0000 { + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; + reg = <0x428b0000 0x10000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_USDHC3_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + status = "disabled"; + }; + }; + + gpio2: gpio@43810000 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43810080 0x1000>, <0x43810040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@43820000 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43820080 0x1000>, <0x43820040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@43830000 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43830080 0x1000>, <0x43830040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio1: gpio@47400000 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x47400080 0x1000>, <0x47400040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + }; +}; -- 2.25.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support 2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS) @ 2022-05-05 3:19 ` Rob Herring 2022-05-05 8:44 ` Shawn Guo 1 sibling, 0 replies; 11+ messages in thread From: Rob Herring @ 2022-05-05 3:19 UTC (permalink / raw) To: Peng Fan (OSS) Cc: Peng Fan, kernel, linux-imx, robh+dt, s.hauer, shawnguo, krzysztof.kozlowski+dt, devicetree, linux-kernel, linux-arm-kernel, festevam On Tue, 03 May 2022 20:29:49 +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > The i.MX 93 applications processors are the first in the i.MX portfolio > to integrate the scalable Arm Cortex-A55 core, bringing performance > and energy efficiency to Linux-based edge applications and the > Arm Ethos-U65 microNPU, enabling developers to create more capable, > cost-effective and energy-efficient ML applications. > > Add the basic dtsi support for i.MX93. > > Signed-off-by: Peng Fan <peng.fan@nxp.com> > --- > arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 ++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx93.dtsi | 337 ++++++++++ > 2 files changed, 960 insertions(+) > create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support 2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS) 2022-05-05 3:19 ` Rob Herring @ 2022-05-05 8:44 ` Shawn Guo 2022-05-07 6:46 ` Peng Fan 1 sibling, 1 reply; 11+ messages in thread From: Shawn Guo @ 2022-05-05 8:44 UTC (permalink / raw) To: Peng Fan (OSS) Cc: robh+dt, krzysztof.kozlowski+dt, s.hauer, kernel, festevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, Peng Fan On Tue, May 03, 2022 at 08:29:49PM +0800, Peng Fan (OSS) wrote: ... > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi > new file mode 100644 > index 000000000000..ae8daffe3492 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi > @@ -0,0 +1,337 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2022 NXP > + */ > + > +#include <dt-bindings/clock/imx93-clock.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +#include "imx93-pinfunc.h" > + > +/ { > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + mmc0 = &usdhc1; > + mmc1 = &usdhc2; > + mmc2 = &usdhc3; > + serial0 = &lpuart1; > + serial1 = &lpuart2; > + serial2 = &lpuart3; > + serial3 = &lpuart4; > + serial4 = &lpuart5; > + serial5 = &lpuart6; > + serial6 = &lpuart7; > + serial7 = &lpuart8; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + A55_0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x0>; > + enable-method = "psci"; > + #cooling-cells = <2>; > + }; > + > + A55_1: cpu@100 { > + device_type = "cpu"; > + compatible = "arm,cortex-a55"; > + reg = <0x100>; > + enable-method = "psci"; > + #cooling-cells = <2>; > + }; > + > + }; > + > + osc_32k: clock-osc-32k { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "osc_32k"; > + }; > + > + osc_24m: clock-osc-24m { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + clock-output-names = "osc_24m"; > + }; > + > + clk_ext1: clock-ext1 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <133000000>; > + clock-output-names = "clk_ext1"; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; > + clock-frequency = <24000000>; > + arm,no-tick-in-suspend; > + interrupt-parent = <&gic>; > + }; > + > + gic: interrupt-controller@48000000 { > + compatible = "arm,gic-v3"; > + reg = <0 0x48000000 0 0x10000>, > + <0 0x48040000 0 0xc0000>; > + #interrupt-cells = <3>; > + interrupt-controller; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + }; > + > + soc@0 { Why do we need unit-address '@0' here? > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x0 0x0 0x0 0x80000000>, > + <0x28000000 0x0 0x28000000 0x10000000>; > + > + aips1: bus@44000000 { > + compatible = "fsl,aips-bus", "simple-bus"; > + reg = <0x44000000 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + mu1: mailbox@44230000 { > + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; > + reg = <0x44230000 0x10000>; > + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; > + #mbox-cells = <2>; > + status = "disabled"; > + }; > + > + system_counter: timer@44290000 { > + compatible = "nxp,sysctr-timer"; > + reg = <0x44290000 0x30000>; > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&osc_24m>; > + clock-names = "per"; > + }; > + > + lpuart1: serial@44380000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x44380000 0x1000>; > + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART1_GATE>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart2: serial@44390000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x44390000 0x1000>; > + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART2_GATE>; > + clock-names = "ipg"; > + status = "okay"; We only use "okay" status to flip "disabled" device at board level. > + }; > + > + iomuxc: pinctrl@443c0000 { > + compatible = "fsl,imx93-iomuxc"; > + reg = <0x443c0000 0x10000>; > + }; > + > + clk: clock-controller@44450000 { > + compatible = "fsl,imx93-ccm"; > + reg = <0x44450000 0x10000>; > + #clock-cells = <1>; > + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; > + clock-names = "osc_32k", "osc_24m", "clk_ext1"; > + status = "okay"; > + }; > + > + anatop: anatop@44480000 { > + compatible = "fsl,imx93-anatop", "syscon"; > + reg = <0x44480000 0x10000>; > + }; > + }; > + > + aips2: bus@42000000 { > + compatible = "fsl,aips-bus", "simple-bus"; > + reg = <0x42000000 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + mu2: mailbox@42440000 { > + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; > + reg = <0x42440000 0x10000>; > + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; > + #mbox-cells = <2>; > + status = "disabled"; > + }; > + > + lpuart3: serial@42570000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x42570000 0x1000>; > + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART3_GATE>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart4: serial@42580000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x42580000 0x1000>; > + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART4_GATE>; > + clock-names = "ipg"; > + status = "okay"; > + }; > + > + lpuart5: serial@42590000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x42590000 0x1000>; > + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART5_GATE>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart6: serial@425a0000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x425a0000 0x1000>; > + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART6_GATE>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart7: serial@42690000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x42690000 0x1000>; > + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART7_GATE>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + > + lpuart8: serial@426a0000 { > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; > + reg = <0x426a0000 0x1000>; > + interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_LPUART8_GATE>; > + clock-names = "ipg"; > + status = "disabled"; > + }; > + }; > + > + aips3: bus@42800000 { > + compatible = "fsl,aips-bus", "simple-bus"; > + reg = <0x42800000 0x800000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + usdhc1: mmc@42850000 { > + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; > + reg = <0x42850000 0x10000>; > + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_DUMMY>, > + <&clk IMX93_CLK_DUMMY>, > + <&clk IMX93_CLK_USDHC1_GATE>; > + clock-names = "ipg", "ahb", "per"; > + bus-width = <8>; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + status = "disabled"; > + }; > + > + usdhc2: mmc@42860000 { > + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; > + reg = <0x42860000 0x10000>; > + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_DUMMY>, > + <&clk IMX93_CLK_DUMMY>, > + <&clk IMX93_CLK_USDHC2_GATE>; > + clock-names = "ipg", "ahb", "per"; > + bus-width = <4>; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + status = "disabled"; > + }; > + > + usdhc3: mmc@428b0000 { > + compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; > + reg = <0x428b0000 0x10000>; > + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX93_CLK_DUMMY>, > + <&clk IMX93_CLK_DUMMY>, > + <&clk IMX93_CLK_USDHC3_GATE>; > + clock-names = "ipg", "ahb", "per"; > + bus-width = <4>; > + fsl,tuning-start-tap = <20>; > + fsl,tuning-step= <2>; > + status = "disabled"; > + }; > + }; > + > + gpio2: gpio@43810000 { > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x43810080 0x1000>, <0x43810040 0x40>; 'make W=1 dtbs' gives the following warnings. ../arch/arm64/boot/dts/freescale/imx93.dtsi:289.24-299.5: Warning (simple_bus_reg): /soc@0/gpio@43810000: simple-bus unit address format error, expected "43810080" ../arch/arm64/boot/dts/freescale/imx93.dtsi:301.24-311.5: Warning (simple_bus_reg): /soc@0/gpio@43820000: simple-bus unit address format error, expected "43820080" ../arch/arm64/boot/dts/freescale/imx93.dtsi:313.24-323.5: Warning (simple_bus_reg): /soc@0/gpio@43830000: simple-bus unit address format error, expected "43830080" ../arch/arm64/boot/dts/freescale/imx93.dtsi:325.24-335.5: Warning (simple_bus_reg): /soc@0/gpio@47400000: simple-bus unit address format error, expected "47400080" Shawn > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&iomuxc 0 32 32>; > + }; > + > + gpio3: gpio@43820000 { > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x43820080 0x1000>, <0x43820040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&iomuxc 0 64 32>; > + }; > + > + gpio4: gpio@43830000 { > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x43830080 0x1000>, <0x43830040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&iomuxc 0 96 32>; > + }; > + > + gpio1: gpio@47400000 { > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > + reg = <0x47400080 0x1000>, <0x47400040 0x40>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + gpio-ranges = <&iomuxc 0 0 32>; > + }; > + }; > +}; > -- > 2.25.1 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support 2022-05-05 8:44 ` Shawn Guo @ 2022-05-07 6:46 ` Peng Fan 2022-05-09 21:04 ` Rob Herring 0 siblings, 1 reply; 11+ messages in thread From: Peng Fan @ 2022-05-07 6:46 UTC (permalink / raw) To: Shawn Guo, Peng Fan (OSS) Cc: robh+dt, krzysztof.kozlowski+dt, s.hauer, kernel, festevam, dl-linux-imx, devicetree, linux-kernel, linux-arm-kernel > Subject: Re: [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support > > On Tue, May 03, 2022 at 08:29:49PM +0800, Peng Fan (OSS) wrote: > ... > > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi > > b/arch/arm64/boot/dts/freescale/imx93.dtsi > > new file mode 100644 > > index 000000000000..ae8daffe3492 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi > > @@ -0,0 +1,337 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright 2022 NXP > > + */ > > + > > +#include <dt-bindings/clock/imx93-clock.h> #include > > +<dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > +#include "imx93-pinfunc.h" > > + > > +/ { > > + interrupt-parent = <&gic>; > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + aliases { > > + mmc0 = &usdhc1; > > + mmc1 = &usdhc2; > > + mmc2 = &usdhc3; > > + serial0 = &lpuart1; > > + serial1 = &lpuart2; > > + serial2 = &lpuart3; > > + serial3 = &lpuart4; > > + serial4 = &lpuart5; > > + serial5 = &lpuart6; > > + serial6 = &lpuart7; > > + serial7 = &lpuart8; > > + }; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + A55_0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x0>; > > + enable-method = "psci"; > > + #cooling-cells = <2>; > > + }; > > + > > + A55_1: cpu@100 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a55"; > > + reg = <0x100>; > > + enable-method = "psci"; > > + #cooling-cells = <2>; > > + }; > > + > > + }; > > + > > + osc_32k: clock-osc-32k { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <32768>; > > + clock-output-names = "osc_32k"; > > + }; > > + > > + osc_24m: clock-osc-24m { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <24000000>; > > + clock-output-names = "osc_24m"; > > + }; > > + > > + clk_ext1: clock-ext1 { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <133000000>; > > + clock-output-names = "clk_ext1"; > > + }; > > + > > + psci { > > + compatible = "arm,psci-1.0"; > > + method = "smc"; > > + }; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, > > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>; > > + clock-frequency = <24000000>; > > + arm,no-tick-in-suspend; > > + interrupt-parent = <&gic>; > > + }; > > + > > + gic: interrupt-controller@48000000 { > > + compatible = "arm,gic-v3"; > > + reg = <0 0x48000000 0 0x10000>, > > + <0 0x48040000 0 0xc0000>; > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-parent = <&gic>; > > + }; > > + > > + soc@0 { > > Why do we need unit-address '@0' here? I follow other i.MX dtsi, imx8m[q/m/n/q] all has it. > > > + compatible = "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0x0 0x0 0x0 0x80000000>, > > + <0x28000000 0x0 0x28000000 0x10000000>; > > + > > + aips1: bus@44000000 { > > + compatible = "fsl,aips-bus", "simple-bus"; > > + reg = <0x44000000 0x800000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + mu1: mailbox@44230000 { > > + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; > > + reg = <0x44230000 0x10000>; > > + interrupts = <GIC_SPI 22 > IRQ_TYPE_LEVEL_HIGH>; > > + #mbox-cells = <2>; > > + status = "disabled"; > > + }; > > + > > + system_counter: timer@44290000 { > > + compatible = "nxp,sysctr-timer"; > > + reg = <0x44290000 0x30000>; > > + interrupts = <GIC_SPI 74 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&osc_24m>; > > + clock-names = "per"; > > + }; > > + > > + lpuart1: serial@44380000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x44380000 0x1000>; > > + interrupts = <GIC_SPI 19 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART1_GATE>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + > > + lpuart2: serial@44390000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x44390000 0x1000>; > > + interrupts = <GIC_SPI 20 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART2_GATE>; > > + clock-names = "ipg"; > > + status = "okay"; > > We only use "okay" status to flip "disabled" device at board level. Sure. > > > + }; > > + > > + iomuxc: pinctrl@443c0000 { > > + compatible = "fsl,imx93-iomuxc"; > > + reg = <0x443c0000 0x10000>; > > + }; > > + > > + clk: clock-controller@44450000 { > > + compatible = "fsl,imx93-ccm"; > > + reg = <0x44450000 0x10000>; > > + #clock-cells = <1>; > > + clocks = <&osc_32k>, <&osc_24m>, > <&clk_ext1>; > > + clock-names = "osc_32k", "osc_24m", > "clk_ext1"; > > + status = "okay"; > > + }; > > + > > + anatop: anatop@44480000 { > > + compatible = "fsl,imx93-anatop", "syscon"; > > + reg = <0x44480000 0x10000>; > > + }; > > + }; > > + > > + aips2: bus@42000000 { > > + compatible = "fsl,aips-bus", "simple-bus"; > > + reg = <0x42000000 0x800000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + mu2: mailbox@42440000 { > > + compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; > > + reg = <0x42440000 0x10000>; > > + interrupts = <GIC_SPI 24 > IRQ_TYPE_LEVEL_HIGH>; > > + #mbox-cells = <2>; > > + status = "disabled"; > > + }; > > + > > + lpuart3: serial@42570000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x42570000 0x1000>; > > + interrupts = <GIC_SPI 68 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART3_GATE>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + > > + lpuart4: serial@42580000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x42580000 0x1000>; > > + interrupts = <GIC_SPI 69 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART4_GATE>; > > + clock-names = "ipg"; > > + status = "okay"; > > + }; > > + > > + lpuart5: serial@42590000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x42590000 0x1000>; > > + interrupts = <GIC_SPI 70 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART5_GATE>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + > > + lpuart6: serial@425a0000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x425a0000 0x1000>; > > + interrupts = <GIC_SPI 71 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART6_GATE>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + > > + lpuart7: serial@42690000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x42690000 0x1000>; > > + interrupts = <GIC_SPI 210 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART7_GATE>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + > > + lpuart8: serial@426a0000 { > > + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp- > lpuart"; > > + reg = <0x426a0000 0x1000>; > > + interrupts = <GIC_SPI 211 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_LPUART8_GATE>; > > + clock-names = "ipg"; > > + status = "disabled"; > > + }; > > + }; > > + > > + aips3: bus@42800000 { > > + compatible = "fsl,aips-bus", "simple-bus"; > > + reg = <0x42800000 0x800000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + usdhc1: mmc@42850000 { > > + compatible = "fsl,imx93-usdhc", "fsl,imx8mm- > usdhc"; > > + reg = <0x42850000 0x10000>; > > + interrupts = <GIC_SPI 86 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_DUMMY>, > > + <&clk IMX93_CLK_DUMMY>, > > + <&clk IMX93_CLK_USDHC1_GATE>; > > + clock-names = "ipg", "ahb", "per"; > > + bus-width = <8>; > > + fsl,tuning-start-tap = <20>; > > + fsl,tuning-step= <2>; > > + status = "disabled"; > > + }; > > + > > + usdhc2: mmc@42860000 { > > + compatible = "fsl,imx93-usdhc", "fsl,imx8mm- > usdhc"; > > + reg = <0x42860000 0x10000>; > > + interrupts = <GIC_SPI 87 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_DUMMY>, > > + <&clk IMX93_CLK_DUMMY>, > > + <&clk IMX93_CLK_USDHC2_GATE>; > > + clock-names = "ipg", "ahb", "per"; > > + bus-width = <4>; > > + fsl,tuning-start-tap = <20>; > > + fsl,tuning-step= <2>; > > + status = "disabled"; > > + }; > > + > > + usdhc3: mmc@428b0000 { > > + compatible = "fsl,imx93-usdhc", "fsl,imx8mm- > usdhc"; > > + reg = <0x428b0000 0x10000>; > > + interrupts = <GIC_SPI 205 > IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX93_CLK_DUMMY>, > > + <&clk IMX93_CLK_DUMMY>, > > + <&clk IMX93_CLK_USDHC3_GATE>; > > + clock-names = "ipg", "ahb", "per"; > > + bus-width = <4>; > > + fsl,tuning-start-tap = <20>; > > + fsl,tuning-step= <2>; > > + status = "disabled"; > > + }; > > + }; > > + > > + gpio2: gpio@43810000 { > > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > > + reg = <0x43810080 0x1000>, <0x43810040 0x40>; > > 'make W=1 dtbs' gives the following warnings. > > ../arch/arm64/boot/dts/freescale/imx93.dtsi:289.24-299.5: Warning > (simple_bus_reg): /soc@0/gpio@43810000: simple-bus unit address format > error, expected "43810080" > ../arch/arm64/boot/dts/freescale/imx93.dtsi:301.24-311.5: Warning > (simple_bus_reg): /soc@0/gpio@43820000: simple-bus unit address format > error, expected "43820080" > ../arch/arm64/boot/dts/freescale/imx93.dtsi:313.24-323.5: Warning > (simple_bus_reg): /soc@0/gpio@43830000: simple-bus unit address format > error, expected "43830080" > ../arch/arm64/boot/dts/freescale/imx93.dtsi:325.24-335.5: Warning > (simple_bus_reg): /soc@0/gpio@47400000: simple-bus unit address format > error, expected "47400080" Fix in V3. > > Shawn > > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + gpio-ranges = <&iomuxc 0 32 32>; > > + }; > > + > > + gpio3: gpio@43820000 { > > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > > + reg = <0x43820080 0x1000>, <0x43820040 0x40>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + gpio-ranges = <&iomuxc 0 64 32>; > > + }; > > + > > + gpio4: gpio@43830000 { > > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > > + reg = <0x43830080 0x1000>, <0x43830040 0x40>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + gpio-ranges = <&iomuxc 0 96 32>; > > + }; > > + > > + gpio1: gpio@47400000 { > > + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; > > + reg = <0x47400080 0x1000>, <0x47400040 0x40>; > > + gpio-controller; > > + #gpio-cells = <2>; > > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, > > + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <2>; > > + gpio-ranges = <&iomuxc 0 0 32>; > > + }; > > + }; > > +}; > > -- > > 2.25.1 > > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support 2022-05-07 6:46 ` Peng Fan @ 2022-05-09 21:04 ` Rob Herring 0 siblings, 0 replies; 11+ messages in thread From: Rob Herring @ 2022-05-09 21:04 UTC (permalink / raw) To: Peng Fan Cc: Shawn Guo, Peng Fan (OSS), krzysztof.kozlowski+dt, s.hauer, kernel, festevam, dl-linux-imx, devicetree, linux-kernel, linux-arm-kernel On Sat, May 07, 2022 at 06:46:16AM +0000, Peng Fan wrote: > > Subject: Re: [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support > > > > On Tue, May 03, 2022 at 08:29:49PM +0800, Peng Fan (OSS) wrote: > > ... > > > diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi > > > b/arch/arm64/boot/dts/freescale/imx93.dtsi > > > new file mode 100644 > > > index 000000000000..ae8daffe3492 > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi > > > @@ -0,0 +1,337 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > +/* > > > + * Copyright 2022 NXP > > > + */ > > > + > > > +#include <dt-bindings/clock/imx93-clock.h> #include > > > +<dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> > > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > > + > > > +#include "imx93-pinfunc.h" > > > + > > > +/ { > > > + interrupt-parent = <&gic>; > > > + #address-cells = <2>; > > > + #size-cells = <2>; > > > + > > > + aliases { > > > + mmc0 = &usdhc1; > > > + mmc1 = &usdhc2; > > > + mmc2 = &usdhc3; > > > + serial0 = &lpuart1; > > > + serial1 = &lpuart2; > > > + serial2 = &lpuart3; > > > + serial3 = &lpuart4; > > > + serial4 = &lpuart5; > > > + serial5 = &lpuart6; > > > + serial6 = &lpuart7; > > > + serial7 = &lpuart8; > > > + }; > > > + > > > + cpus { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + A55_0: cpu@0 { > > > + device_type = "cpu"; > > > + compatible = "arm,cortex-a55"; > > > + reg = <0x0>; > > > + enable-method = "psci"; > > > + #cooling-cells = <2>; > > > + }; > > > + > > > + A55_1: cpu@100 { > > > + device_type = "cpu"; > > > + compatible = "arm,cortex-a55"; > > > + reg = <0x100>; > > > + enable-method = "psci"; > > > + #cooling-cells = <2>; > > > + }; > > > + > > > + }; > > > + > > > + osc_32k: clock-osc-32k { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <32768>; > > > + clock-output-names = "osc_32k"; > > > + }; > > > + > > > + osc_24m: clock-osc-24m { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <24000000>; > > > + clock-output-names = "osc_24m"; > > > + }; > > > + > > > + clk_ext1: clock-ext1 { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <133000000>; > > > + clock-output-names = "clk_ext1"; > > > + }; > > > + > > > + psci { > > > + compatible = "arm,psci-1.0"; > > > + method = "smc"; > > > + }; > > > + > > > + timer { > > > + compatible = "arm,armv8-timer"; > > > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | > > IRQ_TYPE_LEVEL_LOW)>, > > > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | > > IRQ_TYPE_LEVEL_LOW)>, > > > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | > > IRQ_TYPE_LEVEL_LOW)>, > > > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | > > IRQ_TYPE_LEVEL_LOW)>; > > > + clock-frequency = <24000000>; > > > + arm,no-tick-in-suspend; > > > + interrupt-parent = <&gic>; > > > + }; > > > + > > > + gic: interrupt-controller@48000000 { > > > + compatible = "arm,gic-v3"; > > > + reg = <0 0x48000000 0 0x10000>, > > > + <0 0x48040000 0 0xc0000>; > > > + #interrupt-cells = <3>; > > > + interrupt-controller; > > > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > > > + interrupt-parent = <&gic>; > > > + }; > > > + > > > + soc@0 { > > > > Why do we need unit-address '@0' here? > > I follow other i.MX dtsi, imx8m[q/m/n/q] all has it. Not a great reason, but yes it is needed. A unit-address should be there if you have 'reg' or 'ranges' and the latter is true here. Rob ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V2 2/3] arm64: dts: freescale: add i.MX93 11x11 EVK basic support 2022-05-03 12:29 [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan (OSS) 2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS) @ 2022-05-03 12:29 ` Peng Fan (OSS) 2022-05-03 12:29 ` [PATCH V2 3/3] arm64: defconfig: enable i.MX93 clk & pinctrl Peng Fan (OSS) 2022-05-05 8:26 ` [PATCH V2 0/3] arm64: add i.MX93 support Shawn Guo 3 siblings, 0 replies; 11+ messages in thread From: Peng Fan (OSS) @ 2022-05-03 12:29 UTC (permalink / raw) To: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer Cc: kernel, festevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, Peng Fan From: Peng Fan <peng.fan@nxp.com> Enable lpuart & SDHC for console and rootfs Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx93-11x11-evk.dts | 130 ++++++++++++++++++ 2 files changed, 131 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index cdf9dfcbe020..562fc1e389a4 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -106,6 +106,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts new file mode 100644 index 000000000000..5ee63e3e4759 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + */ + +/dts-v1/; + +#include "imx93.dtsi" + +/ { + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&mu1 { + status = "okay"; +}; + +&mu2 { + status = "okay"; +}; + +&lpuart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-sdio; + no-mmc; +}; + +&iomuxc { + pinctrl-names = "default"; + status = "okay"; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX93_PAD_UART2_TXD__LPUART2_TX 0x31e + MX93_PAD_UART2_RXD__LPUART2_RX 0x31e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; -- 2.25.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH V2 3/3] arm64: defconfig: enable i.MX93 clk & pinctrl 2022-05-03 12:29 [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan (OSS) 2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS) 2022-05-03 12:29 ` [PATCH V2 2/3] arm64: dts: freescale: add i.MX93 11x11 EVK basic support Peng Fan (OSS) @ 2022-05-03 12:29 ` Peng Fan (OSS) 2022-05-05 8:26 ` [PATCH V2 0/3] arm64: add i.MX93 support Shawn Guo 3 siblings, 0 replies; 11+ messages in thread From: Peng Fan (OSS) @ 2022-05-03 12:29 UTC (permalink / raw) To: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer Cc: kernel, festevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, Peng Fan From: Peng Fan <peng.fan@nxp.com> Enable i.MX93 clk and pinctrl driver for booting the system Signed-off-by: Peng Fan <peng.fan@nxp.com> --- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c79bb743926d..849e997a365e 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -526,6 +526,7 @@ CONFIG_PINCTRL_IMX8QM=y CONFIG_PINCTRL_IMX8QXP=y CONFIG_PINCTRL_IMX8DXL=y CONFIG_PINCTRL_IMX8ULP=y +CONFIG_PINCTRL_IMX93=y CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_IPQ8074=y CONFIG_PINCTRL_IPQ6018=y @@ -1025,6 +1026,7 @@ CONFIG_CLK_IMX8MP=y CONFIG_CLK_IMX8MQ=y CONFIG_CLK_IMX8QXP=y CONFIG_CLK_IMX8ULP=y +CONFIG_CLK_IMX93=y CONFIG_TI_SCI_CLK=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_A53PLL=y -- 2.25.1 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V2 0/3] arm64: add i.MX93 support 2022-05-03 12:29 [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan (OSS) ` (2 preceding siblings ...) 2022-05-03 12:29 ` [PATCH V2 3/3] arm64: defconfig: enable i.MX93 clk & pinctrl Peng Fan (OSS) @ 2022-05-05 8:26 ` Shawn Guo 2022-05-05 8:29 ` Peng Fan 2022-05-05 9:26 ` Peng Fan 3 siblings, 2 replies; 11+ messages in thread From: Shawn Guo @ 2022-05-05 8:26 UTC (permalink / raw) To: Peng Fan (OSS) Cc: robh+dt, krzysztof.kozlowski+dt, s.hauer, kernel, festevam, linux-imx, devicetree, linux-kernel, linux-arm-kernel, Peng Fan Hi Peng, On Tue, May 03, 2022 at 08:29:48PM +0800, Peng Fan (OSS) wrote: > From: Peng Fan <peng.fan@nxp.com> > > > V2: > Update License > > Add i.MX93 dtsi and 11x11 evk board support > > The required bindings and drivers has already been in tree. > There arem checkpatch error for the pin header files as other i.MX pin > pin header files. > > Peng Fan (3): > arm64: dts: freescale: Add i.MX93 dtsi support > arm64: dts: freescale: add i.MX93 11x11 EVK basic support > arm64: defconfig: enable i.MX93 clk & pinctrl Could you check if we can eliminate some (if not all) of the dtbs_check issues below? Shawn DTC arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb CHECK arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'compatible' is a required property From schema: .local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'model' is a required property From schema: .local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44380000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@44000000/serial@44380000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44390000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@44000000/serial@44390000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: pinctrl@443c0000: 'pinctrl-0' is a dependency of 'pinctrl-names' From schema: .local/lib/python3.8/site-packages/dtschema/schemas/pinctrl/pinctrl-consumer.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@44000000/anatop@44480000: failed to match any schema with compatible: ['fsl,imx93-anatop', 'syscon'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42570000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42570000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42580000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42580000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42590000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42590000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@425a0000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@425a0000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42690000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@42690000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@426a0000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050-lpuart'] 'fsl,imx8ulp-lpuart' was expected 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] 'fsl,imx8qxp-lpuart' was expected From schema: Documentation/devicetree/bindings/serial/fsl-lpuart.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: /soc@0/bus@42000000/serial@426a0000: failed to match any schema with compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43810000: interrupts: [[0, 57, 4], [0, 58, 4]] is too long From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43820000: interrupts: [[0, 59, 4], [0, 60, 4]] is too long From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43830000: interrupts: [[0, 189, 4], [0, 190, 4]] is too long From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@47400000: interrupts: [[0, 10, 4], [0, 11, 4]] is too long From schema: Documentation/devicetree/bindings/gpio/gpio-vf610.yaml ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH V2 0/3] arm64: add i.MX93 support 2022-05-05 8:26 ` [PATCH V2 0/3] arm64: add i.MX93 support Shawn Guo @ 2022-05-05 8:29 ` Peng Fan 2022-05-05 9:26 ` Peng Fan 1 sibling, 0 replies; 11+ messages in thread From: Peng Fan @ 2022-05-05 8:29 UTC (permalink / raw) To: Shawn Guo, Peng Fan (OSS) Cc: robh+dt, krzysztof.kozlowski+dt, s.hauer, kernel, festevam, dl-linux-imx, devicetree, linux-kernel, linux-arm-kernel Shawn, > Subject: Re: [PATCH V2 0/3] arm64: add i.MX93 support > > Hi Peng, > > On Tue, May 03, 2022 at 08:29:48PM +0800, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > > > V2: > > Update License > > > > Add i.MX93 dtsi and 11x11 evk board support > > > > The required bindings and drivers has already been in tree. > > There arem checkpatch error for the pin header files as other i.MX pin > > pin header files. > > > > Peng Fan (3): > > arm64: dts: freescale: Add i.MX93 dtsi support > > arm64: dts: freescale: add i.MX93 11x11 EVK basic support > > arm64: defconfig: enable i.MX93 clk & pinctrl > > Could you check if we can eliminate some (if not all) of the dtbs_check issues > below? Sorry for this. Will fix in v3. Thanks, Peng. > > Shawn > > > DTC arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb > CHECK arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'compatible' is a > required property > From schema: .local/lib/python3.8/site- > packages/dtschema/schemas/root-node.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'model' is a required > property > From schema: .local/lib/python3.8/site- > packages/dtschema/schemas/root-node.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44380000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: > repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@44000000/serial@44380000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44390000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: > repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@44000000/serial@44390000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: pinctrl@443c0000: > 'pinctrl-0' is a dependency of 'pinctrl-names' > From schema: .local/lib/python3.8/site- > packages/dtschema/schemas/pinctrl/pinctrl-consumer.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@44000000/anatop@44480000: failed to match any schema with > compatible: ['fsl,imx93-anatop', 'syscon'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42570000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42570000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42580000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42580000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42590000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42590000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@425a0000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@425a0000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42690000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42690000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@426a0000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@426a0000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43810000: > interrupts: [[0, 57, 4], [0, 58, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43820000: > interrupts: [[0, 59, 4], [0, 60, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43830000: > interrupts: [[0, 189, 4], [0, 190, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@47400000: > interrupts: [[0, 10, 4], [0, 11, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml ^ permalink raw reply [flat|nested] 11+ messages in thread
* RE: [PATCH V2 0/3] arm64: add i.MX93 support 2022-05-05 8:26 ` [PATCH V2 0/3] arm64: add i.MX93 support Shawn Guo 2022-05-05 8:29 ` Peng Fan @ 2022-05-05 9:26 ` Peng Fan 1 sibling, 0 replies; 11+ messages in thread From: Peng Fan @ 2022-05-05 9:26 UTC (permalink / raw) To: Shawn Guo, Peng Fan (OSS) Cc: robh+dt, krzysztof.kozlowski+dt, s.hauer, kernel, festevam, dl-linux-imx, devicetree, linux-kernel, linux-arm-kernel Shawn, > Subject: Re: [PATCH V2 0/3] arm64: add i.MX93 support > > Hi Peng, > > On Tue, May 03, 2022 at 08:29:48PM +0800, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@nxp.com> > > > > > > V2: > > Update License > > > > Add i.MX93 dtsi and 11x11 evk board support > > > > The required bindings and drivers has already been in tree. > > There arem checkpatch error for the pin header files as other i.MX pin > > pin header files. > > > > Peng Fan (3): > > arm64: dts: freescale: Add i.MX93 dtsi support > > arm64: dts: freescale: add i.MX93 11x11 EVK basic support > > arm64: defconfig: enable i.MX93 clk & pinctrl > > Could you check if we can eliminate some (if not all) of the dtbs_check issues > below? I just give a check, the fsl,imx93-lpuart strings are in linux-next tree through Greg's branch. With that patch, there will no lpuart warnings as below: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/ commit/?id=77edd0de002813629bb3b6efd336a630fab68aa0 But there is a warning about compatible/model for board, so I'll still send V3. Thanks, Peng. > > Shawn > > > DTC arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb > CHECK arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'compatible' is a > required property > From schema: .local/lib/python3.8/site- > packages/dtschema/schemas/root-node.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: /: 'model' is a required > property > From schema: .local/lib/python3.8/site- > packages/dtschema/schemas/root-node.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44380000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: > repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@44000000/serial@44380000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@44390000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: > repos/korg/imx/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@44000000/serial@44390000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: pinctrl@443c0000: > 'pinctrl-0' is a dependency of 'pinctrl-names' > From schema: .local/lib/python3.8/site- > packages/dtschema/schemas/pinctrl/pinctrl-consumer.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@44000000/anatop@44480000: failed to match any schema with > compatible: ['fsl,imx93-anatop', 'syscon'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42570000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42570000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42580000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42580000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42590000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42590000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@425a0000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@425a0000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@42690000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@42690000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: serial@426a0000: > compatible: 'oneOf' conditional failed, one must be fixed: > ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] is too long > 'fsl,imx93-lpuart' is not one of ['fsl,vf610-lpuart', 'fsl,ls1021a-lpuart', > 'fsl,ls1028a-lpuart', 'fsl,imx7ulp-lpuart', 'fsl,imx8qxp-lpuart', 'fsl,imxrt1050- > lpuart'] > 'fsl,imx8ulp-lpuart' was expected > 'fsl,imx93-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart'] > 'fsl,imx8qxp-lpuart' was expected > From schema: Documentation/devicetree/bindings/serial/fsl- > lpuart.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb:0:0: > /soc@0/bus@42000000/serial@426a0000: failed to match any schema with > compatible: ['fsl,imx93-lpuart', 'fsl,imx7ulp-lpuart'] > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43810000: > interrupts: [[0, 57, 4], [0, 58, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43820000: > interrupts: [[0, 59, 4], [0, 60, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@43830000: > interrupts: [[0, 189, 4], [0, 190, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml > arch/arm64/boot/dts/freescale/imx93-11x11-evk.dtb: gpio@47400000: > interrupts: [[0, 10, 4], [0, 11, 4]] is too long > From schema: Documentation/devicetree/bindings/gpio/gpio- > vf610.yaml ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-05-09 21:04 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-05-03 12:29 [PATCH V2 0/3] arm64: add i.MX93 support Peng Fan (OSS) 2022-05-03 12:29 ` [PATCH V2 1/3] arm64: dts: freescale: Add i.MX93 dtsi support Peng Fan (OSS) 2022-05-05 3:19 ` Rob Herring 2022-05-05 8:44 ` Shawn Guo 2022-05-07 6:46 ` Peng Fan 2022-05-09 21:04 ` Rob Herring 2022-05-03 12:29 ` [PATCH V2 2/3] arm64: dts: freescale: add i.MX93 11x11 EVK basic support Peng Fan (OSS) 2022-05-03 12:29 ` [PATCH V2 3/3] arm64: defconfig: enable i.MX93 clk & pinctrl Peng Fan (OSS) 2022-05-05 8:26 ` [PATCH V2 0/3] arm64: add i.MX93 support Shawn Guo 2022-05-05 8:29 ` Peng Fan 2022-05-05 9:26 ` Peng Fan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).