[PATCH v3 0/4] PM / devfreq: Add cpu based scaling support to passive governor

[PATCH v3 0/4] PM / devfreq: Add cpu based scaling support to passive governor

[Chanwoo Choi]

The devfreq passive governor has already supported the devfreq parent device
for coupling the frequency change if some hardware have the constraints
such as power sharing and so on.

Add cpu based scaling support to passive governor with required-opp property.
It uses the cpufreq notifier to catch the frequency change timing of cpufreq
and get the next frequency according to new cpu frequency by using required-opp
property. It is based on patch[1] and then just code clean-up by myself.

Make the common code for both passive_devfreq and passive_cpufreq
parent type to remove the duplicate code.

[1] [RFC,v2] PM / devfreq: Add cpu based scaling support to passive_governor
- https://lore.kernel.org/patchwork/patch/1101049/

Changes from v2:
: https://patchwork.kernel.org/project/linux-pm/cover/20220507150145.531864-1-cw00.choi@samsung.com/
- Drop the following patch ("PM / devfreq: passive: Update frequency when start governor")
- Move p_data->this initialization into cpufreq_passive_regiser_notifier()

Changes from v1:
: https://patchwork.kernel.org/project/linux-pm/cover/20210617060546.26933-1-cw00.choi@samsung.com/
- Rename cpu_data variable to parent_cpu_data to avoid build fail
- Use for_each_possible_cpu macro when register cpufreq transition notifier
- Add missing exception handling when cpufreq_passive_register_notifier is failed
- Keep cpufreq_policy for posible cpus instead of NR_CPU in order to avoid
  the memory waste when NR_CPU is too high.
- Add reviewed-by tag of Matthias Kaehlcke for patch1


Chanwoo Choi (3):
  PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
  PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
  PM / devfreq: passive: Keep cpufreq_policy for possible cpus

Saravana Kannan (1):
  PM / devfreq: Add cpu based scaling support to passive governor

 drivers/devfreq/devfreq.c          |  20 +-
 drivers/devfreq/governor.h         |  27 ++
 drivers/devfreq/governor_passive.c | 400 ++++++++++++++++++++++++-----
 include/linux/devfreq.h            |  17 +-
 4 files changed, 387 insertions(+), 77 deletions(-)

-- 
2.25.1

[PATCH v3 1/4] PM / devfreq: Export devfreq_get_freq_range symbol within devfreq

[Chanwoo Choi]

In order to get frequency range within devfreq governors,
export devfreq_get_freq_range symbol within devfreq.

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/devfreq.c  | 20 ++++++++++++--------
 drivers/devfreq/governor.h |  2 ++
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index a525a609dfc6..01474daf4548 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -112,16 +112,16 @@ static unsigned long find_available_max_freq(struct devfreq *devfreq)
 }
 
 /**
- * get_freq_range() - Get the current freq range
+ * devfreq_get_freq_range() - Get the current freq range
  * @devfreq:	the devfreq instance
  * @min_freq:	the min frequency
  * @max_freq:	the max frequency
  *
  * This takes into consideration all constraints.
  */
-static void get_freq_range(struct devfreq *devfreq,
-			   unsigned long *min_freq,
-			   unsigned long *max_freq)
+void devfreq_get_freq_range(struct devfreq *devfreq,
+			    unsigned long *min_freq,
+			    unsigned long *max_freq)
 {
 	unsigned long *freq_table = devfreq->profile->freq_table;
 	s32 qos_min_freq, qos_max_freq;
@@ -158,6 +158,7 @@ static void get_freq_range(struct devfreq *devfreq,
 	if (*min_freq > *max_freq)
 		*min_freq = *max_freq;
 }
+EXPORT_SYMBOL(devfreq_get_freq_range);
 
 /**
  * devfreq_get_freq_level() - Lookup freq_table for the frequency
@@ -418,7 +419,7 @@ int devfreq_update_target(struct devfreq *devfreq, unsigned long freq)
 	err = devfreq->governor->get_target_freq(devfreq, &freq);
 	if (err)
 		return err;
-	get_freq_range(devfreq, &min_freq, &max_freq);
+	devfreq_get_freq_range(devfreq, &min_freq, &max_freq);
 
 	if (freq < min_freq) {
 		freq = min_freq;
@@ -785,6 +786,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 {
 	struct devfreq *devfreq;
 	struct devfreq_governor *governor;
+	unsigned long min_freq, max_freq;
 	int err = 0;
 
 	if (!dev || !profile || !governor_name) {
@@ -849,6 +851,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
 		goto err_dev;
 	}
 
+	devfreq_get_freq_range(devfreq, &min_freq, &max_freq);
+
 	devfreq->suspend_freq = dev_pm_opp_get_suspend_opp_freq(dev);
 	devfreq->opp_table = dev_pm_opp_get_opp_table(dev);
 	if (IS_ERR(devfreq->opp_table))
@@ -1587,7 +1591,7 @@ static ssize_t min_freq_show(struct device *dev, struct device_attribute *attr,
 	unsigned long min_freq, max_freq;
 
 	mutex_lock(&df->lock);
-	get_freq_range(df, &min_freq, &max_freq);
+	devfreq_get_freq_range(df, &min_freq, &max_freq);
 	mutex_unlock(&df->lock);
 
 	return sprintf(buf, "%lu\n", min_freq);
@@ -1641,7 +1645,7 @@ static ssize_t max_freq_show(struct device *dev, struct device_attribute *attr,
 	unsigned long min_freq, max_freq;
 
 	mutex_lock(&df->lock);
-	get_freq_range(df, &min_freq, &max_freq);
+	devfreq_get_freq_range(df, &min_freq, &max_freq);
 	mutex_unlock(&df->lock);
 
 	return sprintf(buf, "%lu\n", max_freq);
@@ -1955,7 +1959,7 @@ static int devfreq_summary_show(struct seq_file *s, void *data)
 
 		mutex_lock(&devfreq->lock);
 		cur_freq = devfreq->previous_freq;
-		get_freq_range(devfreq, &min_freq, &max_freq);
+		devfreq_get_freq_range(devfreq, &min_freq, &max_freq);
 		timer = devfreq->profile->timer;
 
 		if (IS_SUPPORTED_ATTR(devfreq->governor->attrs, POLLING_INTERVAL))
diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
index 002a7d67e39d..b0dbfee8bbf2 100644
--- a/drivers/devfreq/governor.h
+++ b/drivers/devfreq/governor.h
@@ -89,6 +89,8 @@ int devm_devfreq_add_governor(struct device *dev,
 
 int devfreq_update_status(struct devfreq *devfreq, unsigned long freq);
 int devfreq_update_target(struct devfreq *devfreq, unsigned long freq);
+void devfreq_get_freq_range(struct devfreq *devfreq, unsigned long *min_freq,
+			    unsigned long *max_freq);
 
 static inline int devfreq_update_stats(struct devfreq *df)
 {
-- 
2.25.1

[PATCH v3 2/4] PM / devfreq: Add cpu based scaling support to passive governor

[Chanwoo Choi]

From: Saravana Kannan <skannan@codeaurora.org>

Many CPU architectures have caches that can scale independent of the
CPUs. Frequency scaling of the caches is necessary to make sure that the
cache is not a performance bottleneck that leads to poor performance and
power. The same idea applies for RAM/DDR.

To achieve this, this patch adds support for cpu based scaling to the
passive governor. This is accomplished by taking the current frequency
of each CPU frequency domain and then adjust the frequency of the cache
(or any devfreq device) based on the frequency of the CPUs. It listens
to CPU frequency transition notifiers to keep itself up to date on the
current CPU frequency.

To decide the frequency of the device, the governor does one of the
following:
* Derives the optimal devfreq device opp from required-opps property of
  the parent cpu opp_table.

* Scales the device frequency in proportion to the CPU frequency. So, if
  the CPUs are running at their max frequency, the device runs at its
  max frequency. If the CPUs are running at their min frequency, the
  device runs at its min frequency. It is interpolated for frequencies
  in between.

Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
[Sibi: Integrated cpu-freqmap governor into passive_governor]
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[Chanwoo: Fix conflict with latest code and cleanup code]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/governor.h         |  22 +++
 drivers/devfreq/governor_passive.c | 297 +++++++++++++++++++++++++++--
 include/linux/devfreq.h            |  17 +-
 3 files changed, 322 insertions(+), 14 deletions(-)

diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
index b0dbfee8bbf2..335c4a491254 100644
--- a/drivers/devfreq/governor.h
+++ b/drivers/devfreq/governor.h
@@ -47,6 +47,28 @@
 #define DEVFREQ_GOV_ATTR_POLLING_INTERVAL		BIT(0)
 #define DEVFREQ_GOV_ATTR_TIMER				BIT(1)
 
+/**
+ * struct devfreq_cpu_data - Hold the per-cpu data
+ * @dev:	reference to cpu device.
+ * @first_cpu:	the cpumask of the first cpu of a policy.
+ * @opp_table:	reference to cpu opp table.
+ * @cur_freq:	the current frequency of the cpu.
+ * @min_freq:	the min frequency of the cpu.
+ * @max_freq:	the max frequency of the cpu.
+ *
+ * This structure stores the required cpu_data of a cpu.
+ * This is auto-populated by the governor.
+ */
+struct devfreq_cpu_data {
+	struct device *dev;
+	unsigned int first_cpu;
+
+	struct opp_table *opp_table;
+	unsigned int cur_freq;
+	unsigned int min_freq;
+	unsigned int max_freq;
+};
+
 /**
  * struct devfreq_governor - Devfreq policy governor
  * @node:		list node - contains registered devfreq governors
diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index fc09324a03e0..3fba05beaf24 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -8,11 +8,84 @@
  */
 
 #include <linux/module.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/devfreq.h>
 #include "governor.h"
 
-static int devfreq_passive_get_target_freq(struct devfreq *devfreq,
+#define HZ_PER_KHZ	1000
+
+static unsigned long get_target_freq_by_required_opp(struct device *p_dev,
+						struct opp_table *p_opp_table,
+						struct opp_table *opp_table,
+						unsigned long freq)
+{
+	struct dev_pm_opp *opp = NULL, *p_opp = NULL;
+
+	if (!p_dev || !p_opp_table || !opp_table || !freq)
+		return 0;
+
+	p_opp = devfreq_recommended_opp(p_dev, &freq, 0);
+	if (IS_ERR(p_opp))
+		return 0;
+
+	opp = dev_pm_opp_xlate_required_opp(p_opp_table, opp_table, p_opp);
+	dev_pm_opp_put(p_opp);
+
+	if (IS_ERR(opp))
+		return 0;
+
+	freq = dev_pm_opp_get_freq(opp);
+	dev_pm_opp_put(opp);
+
+	return freq;
+}
+
+static int get_target_freq_with_cpufreq(struct devfreq *devfreq,
+					unsigned long *target_freq)
+{
+	struct devfreq_passive_data *p_data =
+				(struct devfreq_passive_data *)devfreq->data;
+	struct devfreq_cpu_data *parent_cpu_data;
+	unsigned long cpu, cpu_cur, cpu_min, cpu_max, cpu_percent;
+	unsigned long dev_min, dev_max;
+	unsigned long freq = 0;
+
+	for_each_online_cpu(cpu) {
+		parent_cpu_data = p_data->parent_cpu_data[cpu];
+		if (!parent_cpu_data || parent_cpu_data->first_cpu != cpu)
+			continue;
+
+		/* Get target freq via required opps */
+		cpu_cur = parent_cpu_data->cur_freq * HZ_PER_KHZ;
+		freq = get_target_freq_by_required_opp(parent_cpu_data->dev,
+					parent_cpu_data->opp_table,
+					devfreq->opp_table, cpu_cur);
+		if (freq) {
+			*target_freq = max(freq, *target_freq);
+			continue;
+		}
+
+		/* Use interpolation if required opps is not available */
+		devfreq_get_freq_range(devfreq, &dev_min, &dev_max);
+
+		cpu_min = parent_cpu_data->min_freq;
+		cpu_max = parent_cpu_data->max_freq;
+		cpu_cur = parent_cpu_data->cur_freq;
+
+		cpu_percent = ((cpu_cur - cpu_min) * 100) / (cpu_max - cpu_min);
+		freq = dev_min + mult_frac(dev_max - dev_min, cpu_percent, 100);
+
+		*target_freq = max(freq, *target_freq);
+	}
+
+	return 0;
+}
+
+static int get_target_freq_with_devfreq(struct devfreq *devfreq,
 					unsigned long *freq)
 {
 	struct devfreq_passive_data *p_data
@@ -99,6 +172,184 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq,
 	return 0;
 }
 
+static int devfreq_passive_get_target_freq(struct devfreq *devfreq,
+					   unsigned long *freq)
+{
+	struct devfreq_passive_data *p_data =
+				(struct devfreq_passive_data *)devfreq->data;
+	int ret;
+
+	if (!p_data)
+		return -EINVAL;
+
+	/*
+	 * If the devfreq device with passive governor has the specific method
+	 * to determine the next frequency, should use the get_target_freq()
+	 * of struct devfreq_passive_data.
+	 */
+	if (p_data->get_target_freq)
+		return p_data->get_target_freq(devfreq, freq);
+
+	switch (p_data->parent_type) {
+	case DEVFREQ_PARENT_DEV:
+		ret = get_target_freq_with_devfreq(devfreq, freq);
+		break;
+	case CPUFREQ_PARENT_DEV:
+		ret = get_target_freq_with_cpufreq(devfreq, freq);
+		break;
+	default:
+		ret = -EINVAL;
+		dev_err(&devfreq->dev, "Invalid parent type\n");
+		break;
+	}
+
+	return ret;
+}
+
+static int cpufreq_passive_notifier_call(struct notifier_block *nb,
+					 unsigned long event, void *ptr)
+{
+	struct devfreq_passive_data *p_data =
+			container_of(nb, struct devfreq_passive_data, nb);
+	struct devfreq *devfreq = (struct devfreq *)p_data->this;
+	struct devfreq_cpu_data *parent_cpu_data;
+	struct cpufreq_freqs *freqs = ptr;
+	unsigned int cur_freq;
+	int ret;
+
+	if (event != CPUFREQ_POSTCHANGE || !freqs ||
+		!p_data->parent_cpu_data[freqs->policy->cpu])
+		return 0;
+
+	parent_cpu_data = p_data->parent_cpu_data[freqs->policy->cpu];
+	if (parent_cpu_data->cur_freq == freqs->new)
+		return 0;
+
+	cur_freq = parent_cpu_data->cur_freq;
+	parent_cpu_data->cur_freq = freqs->new;
+
+	mutex_lock(&devfreq->lock);
+	ret = devfreq_update_target(devfreq, freqs->new);
+	mutex_unlock(&devfreq->lock);
+	if (ret) {
+		parent_cpu_data->cur_freq = cur_freq;
+		dev_err(&devfreq->dev, "failed to update the frequency.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
+{
+	struct devfreq_passive_data *p_data
+			= (struct devfreq_passive_data *)devfreq->data;
+	struct devfreq_cpu_data *parent_cpu_data;
+	int cpu, ret;
+
+	if (p_data->nb.notifier_call) {
+		ret = cpufreq_unregister_notifier(&p_data->nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+		if (ret < 0)
+			return ret;
+	}
+
+	for_each_possible_cpu(cpu) {
+		parent_cpu_data = p_data->parent_cpu_data[cpu];
+		if (!parent_cpu_data)
+			continue;
+
+		if (parent_cpu_data->opp_table)
+			dev_pm_opp_put_opp_table(parent_cpu_data->opp_table);
+		kfree(parent_cpu_data);
+	}
+
+	return 0;
+}
+
+static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
+{
+	struct devfreq_passive_data *p_data
+			= (struct devfreq_passive_data *)devfreq->data;
+	struct device *dev = devfreq->dev.parent;
+	struct opp_table *opp_table = NULL;
+	struct devfreq_cpu_data *parent_cpu_data;
+	struct cpufreq_policy *policy;
+	struct device *cpu_dev;
+	unsigned int cpu;
+	int ret;
+
+	if (!p_data->this)
+		p_data->this = devfreq;
+
+	p_data->nb.notifier_call = cpufreq_passive_notifier_call;
+	ret = cpufreq_register_notifier(&p_data->nb, CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(dev, "failed to register cpufreq notifier\n");
+		p_data->nb.notifier_call = NULL;
+		goto err;
+	}
+
+	for_each_possible_cpu(cpu) {
+		if (p_data->parent_cpu_data[cpu])
+			continue;
+
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy) {
+			ret = -EPROBE_DEFER;
+			goto err;
+		}
+
+		parent_cpu_data = kzalloc(sizeof(*parent_cpu_data),
+						GFP_KERNEL);
+		if (!parent_cpu_data) {
+			ret = -ENOMEM;
+			goto err_put_policy;
+		}
+
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			dev_err(dev, "failed to get cpu device\n");
+			ret = -ENODEV;
+			goto err_free_cpu_data;
+		}
+
+		opp_table = dev_pm_opp_get_opp_table(cpu_dev);
+		if (IS_ERR(opp_table)) {
+			dev_err(dev, "failed to get opp_table of cpu%d\n", cpu);
+			ret = PTR_ERR(opp_table);
+			goto err_free_cpu_data;
+		}
+
+		parent_cpu_data->dev = cpu_dev;
+		parent_cpu_data->opp_table = opp_table;
+		parent_cpu_data->first_cpu = cpumask_first(policy->related_cpus);
+		parent_cpu_data->cur_freq = policy->cur;
+		parent_cpu_data->min_freq = policy->cpuinfo.min_freq;
+		parent_cpu_data->max_freq = policy->cpuinfo.max_freq;
+
+		p_data->parent_cpu_data[cpu] = parent_cpu_data;
+		cpufreq_cpu_put(policy);
+	}
+
+	mutex_lock(&devfreq->lock);
+	ret = devfreq_update_target(devfreq, 0L);
+	mutex_unlock(&devfreq->lock);
+	if (ret)
+		dev_err(dev, "failed to update the frequency\n");
+
+	return ret;
+
+err_free_cpu_data:
+	kfree(parent_cpu_data);
+err_put_policy:
+	cpufreq_cpu_put(policy);
+err:
+	WARN_ON(cpufreq_passive_unregister_notifier(devfreq));
+
+	return ret;
+}
+
 static int devfreq_passive_notifier_call(struct notifier_block *nb,
 				unsigned long event, void *ptr)
 {
@@ -131,30 +382,52 @@ static int devfreq_passive_notifier_call(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static int devfreq_passive_event_handler(struct devfreq *devfreq,
-				unsigned int event, void *data)
+static int devfreq_passive_unregister_notifier(struct devfreq *devfreq)
+{
+	struct devfreq_passive_data *p_data
+			= (struct devfreq_passive_data *)devfreq->data;
+	struct devfreq *parent = (struct devfreq *)p_data->parent;
+	struct notifier_block *nb = &p_data->nb;
+
+	return devfreq_unregister_notifier(parent, nb, DEVFREQ_TRANSITION_NOTIFIER);
+}
+
+static int devfreq_passive_register_notifier(struct devfreq *devfreq)
 {
 	struct devfreq_passive_data *p_data
 			= (struct devfreq_passive_data *)devfreq->data;
 	struct devfreq *parent = (struct devfreq *)p_data->parent;
 	struct notifier_block *nb = &p_data->nb;
-	int ret = 0;
 
 	if (!parent)
 		return -EPROBE_DEFER;
 
+	nb->notifier_call = devfreq_passive_notifier_call;
+	return devfreq_register_notifier(parent, nb, DEVFREQ_TRANSITION_NOTIFIER);
+}
+
+static int devfreq_passive_event_handler(struct devfreq *devfreq,
+				unsigned int event, void *data)
+{
+	struct devfreq_passive_data *p_data
+			= (struct devfreq_passive_data *)devfreq->data;
+	int ret = -EINVAL;
+
+	if (!p_data)
+		return -EINVAL;
+
 	switch (event) {
 	case DEVFREQ_GOV_START:
-		if (!p_data->this)
-			p_data->this = devfreq;
-
-		nb->notifier_call = devfreq_passive_notifier_call;
-		ret = devfreq_register_notifier(parent, nb,
-					DEVFREQ_TRANSITION_NOTIFIER);
+		if (p_data->parent_type == DEVFREQ_PARENT_DEV)
+			ret = devfreq_passive_register_notifier(devfreq);
+		else if (p_data->parent_type == CPUFREQ_PARENT_DEV)
+			ret = cpufreq_passive_register_notifier(devfreq);
 		break;
 	case DEVFREQ_GOV_STOP:
-		WARN_ON(devfreq_unregister_notifier(parent, nb,
-					DEVFREQ_TRANSITION_NOTIFIER));
+		if (p_data->parent_type == DEVFREQ_PARENT_DEV)
+			WARN_ON(devfreq_passive_unregister_notifier(devfreq));
+		else if (p_data->parent_type == CPUFREQ_PARENT_DEV)
+			WARN_ON(cpufreq_passive_unregister_notifier(devfreq));
 		break;
 	default:
 		break;
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index 142474b4af96..ccebb5c84d62 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -38,6 +38,7 @@ enum devfreq_timer {
 
 struct devfreq;
 struct devfreq_governor;
+struct devfreq_cpu_data;
 struct thermal_cooling_device;
 
 /**
@@ -288,6 +289,11 @@ struct devfreq_simple_ondemand_data {
 #endif
 
 #if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE)
+enum devfreq_parent_dev_type {
+	DEVFREQ_PARENT_DEV,
+	CPUFREQ_PARENT_DEV,
+};
+
 /**
  * struct devfreq_passive_data - ``void *data`` fed to struct devfreq
  *	and devfreq_add_device
@@ -299,8 +305,11 @@ struct devfreq_simple_ondemand_data {
  *			using governors except for passive governor.
  *			If the devfreq device has the specific method to decide
  *			the next frequency, should use this callback.
- * @this:	the devfreq instance of own device.
- * @nb:		the notifier block for DEVFREQ_TRANSITION_NOTIFIER list
+ + * @parent_type	parent type of the device.
+ + * @this:		the devfreq instance of own device.
+ + * @nb:		the notifier block for DEVFREQ_TRANSITION_NOTIFIER or
+ *			CPUFREQ_TRANSITION_NOTIFIER list.
+ + * @cpu_data:		the state min/max/current frequency of all online cpu's
  *
  * The devfreq_passive_data have to set the devfreq instance of parent
  * device with governors except for the passive governor. But, don't need to
@@ -314,9 +323,13 @@ struct devfreq_passive_data {
 	/* Optional callback to decide the next frequency of passvice device */
 	int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
 
+	/* Should set the type of parent device */
+	enum devfreq_parent_dev_type parent_type;
+
 	/* For passive governor's internal use. Don't need to set them */
 	struct devfreq *this;
 	struct notifier_block nb;
+	struct devfreq_cpu_data *parent_cpu_data[NR_CPUS];
 };
 #endif
 
-- 
2.25.1

Re: [PATCH v3 2/4] PM / devfreq: Add cpu based scaling support to passive governor

[Chanwoo Choi]

On 22. 5. 9. 21:03, Chanwoo Choi wrote:
> - * @this:	the devfreq instance of own device.
> - * @nb:		the notifier block for DEVFREQ_TRANSITION_NOTIFIER list
> + + * @parent_type	parent type of the device.
> + + * @this:		the devfreq instance of own device.
> + + * @nb:		the notifier block for DEVFREQ_TRANSITION_NOTIFIER or
> + *			CPUFREQ_TRANSITION_NOTIFIER list.
> + + * @cpu_data:		the state min/max/current frequency of all online cpu's

There are some mistake with unneeded '+'. It will be fixed on next
version but anyway it doesn't affect the passive governor operation.

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 3/4] PM / devfreq: passive: Reduce duplicate code when passive_devfreq case

[Chanwoo Choi]

In order to keep the consistent coding style between passive_devfreq
and passive_cpufreq, use common code for handling required opp property.
Also remove the unneed conditional statement and unify the comment
of both passive_devfreq and passive_cpufreq when getting the target frequency.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/governor_passive.c | 66 ++++--------------------------
 1 file changed, 8 insertions(+), 58 deletions(-)

diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index 3fba05beaf24..db02f5219684 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -92,65 +92,16 @@ static int get_target_freq_with_devfreq(struct devfreq *devfreq,
 			= (struct devfreq_passive_data *)devfreq->data;
 	struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent;
 	unsigned long child_freq = ULONG_MAX;
-	struct dev_pm_opp *opp, *p_opp;
 	int i, count;
 
-	/*
-	 * If the devfreq device with passive governor has the specific method
-	 * to determine the next frequency, should use the get_target_freq()
-	 * of struct devfreq_passive_data.
-	 */
-	if (p_data->get_target_freq)
-		return p_data->get_target_freq(devfreq, freq);
+	/* Get target freq via required opps */
+	child_freq = get_target_freq_by_required_opp(parent_devfreq->dev.parent,
+						parent_devfreq->opp_table,
+						devfreq->opp_table, *freq);
+	if (child_freq)
+		goto out;
 
-	/*
-	 * If the parent and passive devfreq device uses the OPP table,
-	 * get the next frequency by using the OPP table.
-	 */
-
-	/*
-	 * - parent devfreq device uses the governors except for passive.
-	 * - passive devfreq device uses the passive governor.
-	 *
-	 * Each devfreq has the OPP table. After deciding the new frequency
-	 * from the governor of parent devfreq device, the passive governor
-	 * need to get the index of new frequency on OPP table of parent
-	 * device. And then the index is used for getting the suitable
-	 * new frequency for passive devfreq device.
-	 */
-	if (!devfreq->profile || !devfreq->profile->freq_table
-		|| devfreq->profile->max_state <= 0)
-		return -EINVAL;
-
-	/*
-	 * The passive governor have to get the correct frequency from OPP
-	 * list of parent device. Because in this case, *freq is temporary
-	 * value which is decided by ondemand governor.
-	 */
-	if (devfreq->opp_table && parent_devfreq->opp_table) {
-		p_opp = devfreq_recommended_opp(parent_devfreq->dev.parent,
-						freq, 0);
-		if (IS_ERR(p_opp))
-			return PTR_ERR(p_opp);
-
-		opp = dev_pm_opp_xlate_required_opp(parent_devfreq->opp_table,
-						    devfreq->opp_table, p_opp);
-		dev_pm_opp_put(p_opp);
-
-		if (IS_ERR(opp))
-			goto no_required_opp;
-
-		*freq = dev_pm_opp_get_freq(opp);
-		dev_pm_opp_put(opp);
-
-		return 0;
-	}
-
-no_required_opp:
-	/*
-	 * Get the OPP table's index of decided frequency by governor
-	 * of parent device.
-	 */
+	/* Use interpolation if required opps is not available */
 	for (i = 0; i < parent_devfreq->profile->max_state; i++)
 		if (parent_devfreq->profile->freq_table[i] == *freq)
 			break;
@@ -158,7 +109,6 @@ static int get_target_freq_with_devfreq(struct devfreq *devfreq,
 	if (i == parent_devfreq->profile->max_state)
 		return -EINVAL;
 
-	/* Get the suitable frequency by using index of parent device. */
 	if (i < devfreq->profile->max_state) {
 		child_freq = devfreq->profile->freq_table[i];
 	} else {
@@ -166,7 +116,7 @@ static int get_target_freq_with_devfreq(struct devfreq *devfreq,
 		child_freq = devfreq->profile->freq_table[count - 1];
 	}
 
-	/* Return the suitable frequency for passive device. */
+out:
 	*freq = child_freq;
 
 	return 0;
-- 
2.25.1

[PATCH v3 4/4] PM / devfreq: passive: Keep cpufreq_policy for possible cpus

[Chanwoo Choi]

The passive governor requires the cpu data to get the next target frequency
of devfreq device if depending on cpu. In order to reduce the unnecessary
memory data, keep cpufreq_policy data for possible cpus instead of NR_CPU.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/governor.h         |  3 ++
 drivers/devfreq/governor_passive.c | 73 ++++++++++++++++++++++++------
 include/linux/devfreq.h            |  4 +-
 3 files changed, 63 insertions(+), 17 deletions(-)

diff --git a/drivers/devfreq/governor.h b/drivers/devfreq/governor.h
index 335c4a491254..0adfebc0467a 100644
--- a/drivers/devfreq/governor.h
+++ b/drivers/devfreq/governor.h
@@ -49,6 +49,7 @@
 
 /**
  * struct devfreq_cpu_data - Hold the per-cpu data
+ * @node:	list node
  * @dev:	reference to cpu device.
  * @first_cpu:	the cpumask of the first cpu of a policy.
  * @opp_table:	reference to cpu opp table.
@@ -60,6 +61,8 @@
  * This is auto-populated by the governor.
  */
 struct devfreq_cpu_data {
+	struct list_head node;
+
 	struct device *dev;
 	unsigned int first_cpu;
 
diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index db02f5219684..331e93b9eb8d 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -18,6 +18,22 @@
 
 #define HZ_PER_KHZ	1000
 
+static struct devfreq_cpu_data *
+get_parent_cpu_data(struct devfreq_passive_data *p_data,
+		    struct cpufreq_policy *policy)
+{
+	struct devfreq_cpu_data *parent_cpu_data;
+
+	if (!p_data || !policy)
+		return NULL;
+
+	list_for_each_entry(parent_cpu_data, &p_data->cpu_data_list, node)
+		if (parent_cpu_data->first_cpu == cpumask_first(policy->related_cpus))
+			return parent_cpu_data;
+
+	return NULL;
+}
+
 static unsigned long get_target_freq_by_required_opp(struct device *p_dev,
 						struct opp_table *p_opp_table,
 						struct opp_table *opp_table,
@@ -50,14 +66,24 @@ static int get_target_freq_with_cpufreq(struct devfreq *devfreq,
 	struct devfreq_passive_data *p_data =
 				(struct devfreq_passive_data *)devfreq->data;
 	struct devfreq_cpu_data *parent_cpu_data;
+	struct cpufreq_policy *policy;
 	unsigned long cpu, cpu_cur, cpu_min, cpu_max, cpu_percent;
 	unsigned long dev_min, dev_max;
 	unsigned long freq = 0;
+	int ret = 0;
 
 	for_each_online_cpu(cpu) {
-		parent_cpu_data = p_data->parent_cpu_data[cpu];
-		if (!parent_cpu_data || parent_cpu_data->first_cpu != cpu)
+		policy = cpufreq_cpu_get(cpu);
+		if (!policy) {
+			ret = -EINVAL;
+			continue;
+		}
+
+		parent_cpu_data = get_parent_cpu_data(p_data, policy);
+		if (!parent_cpu_data) {
+			cpufreq_cpu_put(policy);
 			continue;
+		}
 
 		/* Get target freq via required opps */
 		cpu_cur = parent_cpu_data->cur_freq * HZ_PER_KHZ;
@@ -66,6 +92,7 @@ static int get_target_freq_with_cpufreq(struct devfreq *devfreq,
 					devfreq->opp_table, cpu_cur);
 		if (freq) {
 			*target_freq = max(freq, *target_freq);
+			cpufreq_cpu_put(policy);
 			continue;
 		}
 
@@ -80,9 +107,10 @@ static int get_target_freq_with_cpufreq(struct devfreq *devfreq,
 		freq = dev_min + mult_frac(dev_max - dev_min, cpu_percent, 100);
 
 		*target_freq = max(freq, *target_freq);
+		cpufreq_cpu_put(policy);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int get_target_freq_with_devfreq(struct devfreq *devfreq,
@@ -167,12 +195,11 @@ static int cpufreq_passive_notifier_call(struct notifier_block *nb,
 	unsigned int cur_freq;
 	int ret;
 
-	if (event != CPUFREQ_POSTCHANGE || !freqs ||
-		!p_data->parent_cpu_data[freqs->policy->cpu])
+	if (event != CPUFREQ_POSTCHANGE || !freqs)
 		return 0;
 
-	parent_cpu_data = p_data->parent_cpu_data[freqs->policy->cpu];
-	if (parent_cpu_data->cur_freq == freqs->new)
+	parent_cpu_data = get_parent_cpu_data(p_data, freqs->policy);
+	if (!parent_cpu_data || parent_cpu_data->cur_freq == freqs->new)
 		return 0;
 
 	cur_freq = parent_cpu_data->cur_freq;
@@ -195,7 +222,7 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
 	struct devfreq_passive_data *p_data
 			= (struct devfreq_passive_data *)devfreq->data;
 	struct devfreq_cpu_data *parent_cpu_data;
-	int cpu, ret;
+	int cpu, ret = 0;
 
 	if (p_data->nb.notifier_call) {
 		ret = cpufreq_unregister_notifier(&p_data->nb,
@@ -205,16 +232,26 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
 	}
 
 	for_each_possible_cpu(cpu) {
-		parent_cpu_data = p_data->parent_cpu_data[cpu];
-		if (!parent_cpu_data)
+		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
+		if (!policy) {
+			ret = -EINVAL;
 			continue;
+		}
 
+		parent_cpu_data = get_parent_cpu_data(p_data, policy);
+		if (!parent_cpu_data) {
+			cpufreq_cpu_put(policy);
+			continue;
+		}
+
+		list_del(&parent_cpu_data->node);
 		if (parent_cpu_data->opp_table)
 			dev_pm_opp_put_opp_table(parent_cpu_data->opp_table);
 		kfree(parent_cpu_data);
+		cpufreq_cpu_put(policy);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
@@ -232,6 +269,9 @@ static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
 	if (!p_data->this)
 		p_data->this = devfreq;
 
+	p_data->cpu_data_list
+		= (struct list_head)LIST_HEAD_INIT(p_data->cpu_data_list);
+
 	p_data->nb.notifier_call = cpufreq_passive_notifier_call;
 	ret = cpufreq_register_notifier(&p_data->nb, CPUFREQ_TRANSITION_NOTIFIER);
 	if (ret) {
@@ -241,15 +281,18 @@ static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
 	}
 
 	for_each_possible_cpu(cpu) {
-		if (p_data->parent_cpu_data[cpu])
-			continue;
-
 		policy = cpufreq_cpu_get(cpu);
 		if (!policy) {
 			ret = -EPROBE_DEFER;
 			goto err;
 		}
 
+		parent_cpu_data = get_parent_cpu_data(p_data, policy);
+		if (parent_cpu_data) {
+			cpufreq_cpu_put(policy);
+			continue;
+		}
+
 		parent_cpu_data = kzalloc(sizeof(*parent_cpu_data),
 						GFP_KERNEL);
 		if (!parent_cpu_data) {
@@ -278,7 +321,7 @@ static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
 		parent_cpu_data->min_freq = policy->cpuinfo.min_freq;
 		parent_cpu_data->max_freq = policy->cpuinfo.max_freq;
 
-		p_data->parent_cpu_data[cpu] = parent_cpu_data;
+		list_add_tail(&parent_cpu_data->node, &p_data->cpu_data_list);
 		cpufreq_cpu_put(policy);
 	}
 
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index ccebb5c84d62..2fca831db564 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -309,7 +309,7 @@ enum devfreq_parent_dev_type {
  + * @this:		the devfreq instance of own device.
  + * @nb:		the notifier block for DEVFREQ_TRANSITION_NOTIFIER or
  *			CPUFREQ_TRANSITION_NOTIFIER list.
- + * @cpu_data:		the state min/max/current frequency of all online cpu's
+ + * @cpu_data_list:	the cpufreq_policy list of all possible cpus.
  *
  * The devfreq_passive_data have to set the devfreq instance of parent
  * device with governors except for the passive governor. But, don't need to
@@ -329,7 +329,7 @@ struct devfreq_passive_data {
 	/* For passive governor's internal use. Don't need to set them */
 	struct devfreq *this;
 	struct notifier_block nb;
-	struct devfreq_cpu_data *parent_cpu_data[NR_CPUS];
+	struct list_head cpu_data_list;
 };
 #endif
 
-- 
2.25.1

Re: [PATCH v3 0/4] PM / devfreq: Add cpu based scaling support to passive governor

[Chen-Yu Tsai]

On Mon, May 9, 2022 at 8:03 PM Chanwoo Choi <cwchoi00@gmail.com> wrote:
>
> The devfreq passive governor has already supported the devfreq parent device
> for coupling the frequency change if some hardware have the constraints
> such as power sharing and so on.
>
> Add cpu based scaling support to passive governor with required-opp property.
> It uses the cpufreq notifier to catch the frequency change timing of cpufreq
> and get the next frequency according to new cpu frequency by using required-opp
> property. It is based on patch[1] and then just code clean-up by myself.
>
> Make the common code for both passive_devfreq and passive_cpufreq
> parent type to remove the duplicate code.
>
> [1] [RFC,v2] PM / devfreq: Add cpu based scaling support to passive_governor
> - https://lore.kernel.org/patchwork/patch/1101049/
>
> Changes from v2:
> : https://patchwork.kernel.org/project/linux-pm/cover/20220507150145.531864-1-cw00.choi@samsung.com/
> - Drop the following patch ("PM / devfreq: passive: Update frequency when start governor")
> - Move p_data->this initialization into cpufreq_passive_regiser_notifier()
>
> Changes from v1:
> : https://patchwork.kernel.org/project/linux-pm/cover/20210617060546.26933-1-cw00.choi@samsung.com/
> - Rename cpu_data variable to parent_cpu_data to avoid build fail
> - Use for_each_possible_cpu macro when register cpufreq transition notifier
> - Add missing exception handling when cpufreq_passive_register_notifier is failed
> - Keep cpufreq_policy for posible cpus instead of NR_CPU in order to avoid
>   the memory waste when NR_CPU is too high.
> - Add reviewed-by tag of Matthias Kaehlcke for patch1
>
>
> Chanwoo Choi (3):
>   PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
>   PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
>   PM / devfreq: passive: Keep cpufreq_policy for possible cpus
>
> Saravana Kannan (1):
>   PM / devfreq: Add cpu based scaling support to passive governor

Tested-by: Chen-Yu Tsai <wenst@chromium.org>

on next-20220509 in conjunction with the MediaTek cpufreq [1], CCI devfreq [2]
& SVS [3] series, as well as some fix-ups [4]. AFAICT the CCI devfreq device
is reacting and making frequency changes.


Regards
ChenYu

[1] https://lore.kernel.org/all/20220422075239.16437-1-rex-bc.chen@mediatek.com/
[2] https://lore.kernel.org/all/20220408052150.22536-1-johnson.wang@mediatek.com/
[3] https://lore.kernel.org/all/20220420102044.10832-1-roger.lu@mediatek.com/
[4] https://github.com/wens/linux/commits/mt8183-cpufreq-cci-svs-test

Re: [PATCH v3 0/4] PM / devfreq: Add cpu based scaling support to passive governor

[Chanwoo Choi]

Hi Chen-Yu,

On Tue, May 10, 2022 at 6:00 PM Chen-Yu Tsai <wenst@chromium.org> wrote:
>
> On Mon, May 9, 2022 at 8:03 PM Chanwoo Choi <cwchoi00@gmail.com> wrote:
> >
> > The devfreq passive governor has already supported the devfreq parent device
> > for coupling the frequency change if some hardware have the constraints
> > such as power sharing and so on.
> >
> > Add cpu based scaling support to passive governor with required-opp property.
> > It uses the cpufreq notifier to catch the frequency change timing of cpufreq
> > and get the next frequency according to new cpu frequency by using required-opp
> > property. It is based on patch[1] and then just code clean-up by myself.
> >
> > Make the common code for both passive_devfreq and passive_cpufreq
> > parent type to remove the duplicate code.
> >
> > [1] [RFC,v2] PM / devfreq: Add cpu based scaling support to passive_governor
> > - https://lore.kernel.org/patchwork/patch/1101049/
> >
> > Changes from v2:
> > : https://patchwork.kernel.org/project/linux-pm/cover/20220507150145.531864-1-cw00.choi@samsung.com/
> > - Drop the following patch ("PM / devfreq: passive: Update frequency when start governor")
> > - Move p_data->this initialization into cpufreq_passive_regiser_notifier()
> >
> > Changes from v1:
> > : https://patchwork.kernel.org/project/linux-pm/cover/20210617060546.26933-1-cw00.choi@samsung.com/
> > - Rename cpu_data variable to parent_cpu_data to avoid build fail
> > - Use for_each_possible_cpu macro when register cpufreq transition notifier
> > - Add missing exception handling when cpufreq_passive_register_notifier is failed
> > - Keep cpufreq_policy for posible cpus instead of NR_CPU in order to avoid
> >   the memory waste when NR_CPU is too high.
> > - Add reviewed-by tag of Matthias Kaehlcke for patch1
> >
> >
> > Chanwoo Choi (3):
> >   PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
> >   PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
> >   PM / devfreq: passive: Keep cpufreq_policy for possible cpus
> >
> > Saravana Kannan (1):
> >   PM / devfreq: Add cpu based scaling support to passive governor
>
> Tested-by: Chen-Yu Tsai <wenst@chromium.org>
>
> on next-20220509 in conjunction with the MediaTek cpufreq [1], CCI devfreq [2]
> & SVS [3] series, as well as some fix-ups [4]. AFAICT the CCI devfreq device
> is reacting and making frequency changes.
>
>
> Regards
> ChenYu
>
> [1] https://lore.kernel.org/all/20220422075239.16437-1-rex-bc.chen@mediatek.com/
> [2] https://lore.kernel.org/all/20220408052150.22536-1-johnson.wang@mediatek.com/
> [3] https://lore.kernel.org/all/20220420102044.10832-1-roger.lu@mediatek.com/
> [4] https://github.com/wens/linux/commits/mt8183-cpufreq-cci-svs-test

Thanks for your test.

-- 
Best Regards,
Chanwoo Choi

Re: [PATCH v3 0/4] PM / devfreq: Add cpu based scaling support to passive governor

[Johnson Wang]

On Mon, 2022-05-09 at 21:03 +0900, Chanwoo Choi wrote:
> The devfreq passive governor has already supported the devfreq parent
> device
> for coupling the frequency change if some hardware have the
> constraints
> such as power sharing and so on.
> 
> Add cpu based scaling support to passive governor with required-opp
> property.
> It uses the cpufreq notifier to catch the frequency change timing of
> cpufreq
> and get the next frequency according to new cpu frequency by using
> required-opp
> property. It is based on patch[1] and then just code clean-up by
> myself.
> 
> Make the common code for both passive_devfreq and passive_cpufreq
> parent type to remove the duplicate code.
> 
> [1] [RFC,v2] PM / devfreq: Add cpu based scaling support to
> passive_governor
> - https://lore.kernel.org/patchwork/patch/1101049/
> 
> Changes from v2:
> : 
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-pm/cover/20220507150145.531864-1-cw00.choi@samsung.com/__;!!CTRNKA9wMg0ARbw!x-hPdV1M41ovWuBCw3cVvayFBaqFZRCtLLqDHeX_iNnzvwmOKQYOVQeD9mBfi7n8okEj$
>  
> - Drop the following patch ("PM / devfreq: passive: Update frequency
> when start governor")
> - Move p_data->this initialization into
> cpufreq_passive_regiser_notifier()
> 
> Changes from v1:
> : 
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-pm/cover/20210617060546.26933-1-cw00.choi@samsung.com/__;!!CTRNKA9wMg0ARbw!x-hPdV1M41ovWuBCw3cVvayFBaqFZRCtLLqDHeX_iNnzvwmOKQYOVQeD9mBfiw3rUNcX$
>  
> - Rename cpu_data variable to parent_cpu_data to avoid build fail
> - Use for_each_possible_cpu macro when register cpufreq transition
> notifier
> - Add missing exception handling when
> cpufreq_passive_register_notifier is failed
> - Keep cpufreq_policy for posible cpus instead of NR_CPU in order to
> avoid
>   the memory waste when NR_CPU is too high.
> - Add reviewed-by tag of Matthias Kaehlcke for patch1
> 
> 
> Chanwoo Choi (3):
>   PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
>   PM / devfreq: passive: Reduce duplicate code when passive_devfreq
> case
>   PM / devfreq: passive: Keep cpufreq_policy for possible cpus
> 
> Saravana Kannan (1):
>   PM / devfreq: Add cpu based scaling support to passive governor
> 
>  drivers/devfreq/devfreq.c          |  20 +-
>  drivers/devfreq/governor.h         |  27 ++
>  drivers/devfreq/governor_passive.c | 400 ++++++++++++++++++++++++---
> --
>  include/linux/devfreq.h            |  17 +-
>  4 files changed, 387 insertions(+), 77 deletions(-)
> 

For this serie:

Tested-by: Johnson Wang <johnson.wang@mediatek.com>


BRs,
Johnson Wang