linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: qianfanguijin@163.com
To: linux-sunxi@lists.linux.dev
Cc: Rob Herring <robh+dt@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	qianfan Zhao <qianfanguijin@163.com>
Subject: [PATCH v3 1/2] ARM: dts: sun8i-r40: add opp table for cpu
Date: Thu, 12 May 2022 15:18:57 +0800	[thread overview]
Message-ID: <20220512071858.10805-1-qianfanguijin@163.com> (raw)

From: qianfan Zhao <qianfanguijin@163.com>

OPP table value is get from allwinner lichee linux-3.10 kernel driver

Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
---
Changes in v3:
- remove "allwinner-r40" compatible from allowlist.
- split dts in two part.

 arch/arm/boot/dts/sun8i-r40.dtsi | 47 ++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 291f4784e86c..90de119095fa 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -54,6 +54,41 @@ / {
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -84,24 +119,36 @@ cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
 		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 		};
 	};
 
-- 
2.25.1


             reply	other threads:[~2022-05-12  7:19 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-12  7:18 qianfanguijin [this message]
2022-05-12  7:18 ` [PATCH v3 2/2] ARM: dts: sun8i-r40: Add "cpu-supply" node for sun8i-r40 based board qianfanguijin
2022-05-13  7:38   ` Maxime Ripard
2022-05-13  7:48     ` qianfan
2022-05-13  8:15       ` Maxime Ripard
2022-05-13  8:23         ` qianfan
2022-05-16  7:53           ` Maxime Ripard
2022-05-16 15:39             ` Chen-Yu Tsai
2022-05-12  7:29 ` [PATCH v3 1/2] ARM: dts: sun8i-r40: add opp table for cpu Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220512071858.10805-1-qianfanguijin@163.com \
    --to=qianfanguijin@163.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mripard@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=viresh.kumar@linaro.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).