Re: [PATCH v3 03/23] dt-bindings: ata: ahci-platform: Clarify common AHCI props constraints

[Serge Semin <fancer.lancer@gmail.com>]

On Tue, May 17, 2022 at 02:14:09PM -0500, Rob Herring wrote:
> On Thu, May 12, 2022 at 02:17:50AM +0300, Serge Semin wrote:
> > Indeed in accordance with what is imeplemtned in the AHCI paltform driver
> > and the way the AHCI DT nodes are defined in the DT files we can add the
> > next AHCI DT properties constraints: AHCI CSR ID is fixed to 'ahci', PHY
> > name is fixed to 'sata-phy', AHCI controller can't have more than 32 ports
> > by design.
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > 
> > Changelog v2:
> > - This is a new patch created after rebasing v1 onto the 5.18-rc3 kernel.
> > ---
> >  .../devicetree/bindings/ata/ahci-common.yaml      | 15 ++++++++++-----
> >  1 file changed, 10 insertions(+), 5 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > index 620042ca12e7..a7d1a8353de3 100644
> > --- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > +++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
> > @@ -31,6 +31,8 @@ properties:
> >  
> >    reg-names:
> >      description: CSR space IDs
> > +    contains:
> > +      const: ahci
> 

> Okay, with this it makes sense to keep. The others still should go.

Ok.

-Sergey

> 
> >  
> >    interrupts:
> >      description:
> > @@ -71,14 +73,13 @@ properties:
> >      maxItems: 1
> >  
> >    phy-names:
> > -    maxItems: 1
> > +    const: sata-phy
> >  
> >    ports-implemented:
> >      $ref: '/schemas/types.yaml#/definitions/uint32'
> >      description:
> >        Mask that indicates which ports the HBA supports. Useful if PI is not
> >        programmed by the BIOS, which is true for some embedded SoC's.
> > -    maximum: 0x1f
> >  
> >  patternProperties:
> >    "^sata-port@[0-9a-f]+$":
> > @@ -89,8 +90,12 @@ patternProperties:
> >  
> >      properties:
> >        reg:
> > -        description: AHCI SATA port identifier
> > -        maxItems: 1
> > +        description:
> > +          AHCI SATA port identifier. By design AHCI controller can't have
> > +          more than 32 ports due to the CAP.NP fields and PI register size
> > +          constraints.
> > +        minimum: 0
> > +        maximum: 31
> >  
> >        phys:
> >          description: Individual AHCI SATA port PHY
> > @@ -98,7 +103,7 @@ patternProperties:
> >  
> >        phy-names:
> >          description: AHCI SATA port PHY ID
> > -        maxItems: 1
> > +        const: sata-phy
> >  
> >        target-supply:
> >          description: Power regulator for SATA port target device
> > -- 
> > 2.35.1
> > 
> >