[PATCH 0/3] ARM: s3c: Kconfig: Style cleanups

[PATCH 0/3] ARM: s3c: Kconfig: Style cleanups

[Juerg Haefliger]

The majority of the Kconfig files use a single tab for basic indentation
and a single tab followed by two whitespaces for help text indentation.
Fix the lines that don't follow this convention.

While at it, add missing trailing comments to endif statements and replace
tabs before comments with whitespaces (which seems to be more common).

Juerg Haefliger (3):
  ARM: s3c: Kconfig: Fix indentation
  ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
  ARM: s3c: Kconfig.s3c64xx: Fix indentation

 arch/arm/mach-s3c/Kconfig         | 14 +++++++-------
 arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
 arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 3 files changed, 27 insertions(+), 29 deletions(-)

-- 
2.32.0

[PATCH 1/3] ARM: s3c: Kconfig: Fix indentation

[Juerg Haefliger]

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 arch/arm/mach-s3c/Kconfig | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 1899fc3f44fd..860df703f696 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -43,12 +43,12 @@ config SAMSUNG_ATAGS
 	def_bool n
 	depends on ATAGS
 	help
-	   This option enables ATAGS based boot support code for
-	   Samsung platforms, including static platform devices, legacy
-	   clock, timer and interrupt initialization, etc.
+	  This option enables ATAGS based boot support code for
+	  Samsung platforms, including static platform devices, legacy
+	  clock, timer and interrupt initialization, etc.
 
-	   Platforms that support only DT based boot need not to select
-	   this option.
+	  Platforms that support only DT based boot need not to select
+	  this option.
 
 if SAMSUNG_ATAGS
 
@@ -102,7 +102,7 @@ config S3C_DEV_HSMMC3
 config S3C_DEV_HWMON
 	bool
 	help
-	    Compile in platform device definitions for HWMON
+	  Compile in platform device definitions for HWMON
 
 config S3C_DEV_I2C1
 	bool
@@ -194,7 +194,7 @@ config S3C64XX_DEV_SPI0
 config SAMSUNG_DEV_TS
 	bool
 	help
-	    Common in platform device definitions for touchscreen device
+	  Common in platform device definitions for touchscreen device
 
 config SAMSUNG_DEV_KEYPAD
 	bool
-- 
2.32.0

[PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs

[Juerg Haefliger]

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

While add it, replace tabs before comments with whitespaces and squeeze
multiple empty lines.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
index 000e3e234f71..a7625e772905 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -17,8 +17,6 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
-
-
 menu "Samsung S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -268,7 +266,7 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-endif	# CPU_S3C2410
+endif # CPU_S3C2410
 
 config S3C2412_PM_SLEEP
 	bool
@@ -342,7 +340,7 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-endif	# CPU_S3C2412
+endif # CPU_S3C2412
 
 if CPU_S3C2416
 
@@ -390,7 +388,7 @@ config MACH_S3C2416_DT
 	  Note: This is under development and not all peripherals can be supported
 	  with this machine file.
 
-endif	# CPU_S3C2416
+endif # CPU_S3C2416
 
 if CPU_S3C2440 || CPU_S3C2442
 
@@ -419,7 +417,7 @@ config S3C2440_PLL_16934400
 	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
+endif # CPU_S3C2440 || CPU_S3C2442
 
 if CPU_S3C2440
 
@@ -515,7 +513,7 @@ config SMDK2440_CPU2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 
-endif	# CPU_S3C2440
+endif # CPU_S3C2440
 
 if CPU_S3C2442
 
@@ -535,7 +533,7 @@ config MACH_NEO1973_GTA02
 	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
@@ -547,9 +545,9 @@ config MACH_RX1950
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
-	   Say Y here if you're using HP iPAQ rx1950
+	  Say Y here if you're using HP iPAQ rx1950
 
-endif	# CPU_S3C2442
+endif # CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
@@ -558,7 +556,7 @@ config S3C2443_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations
 
-endif	# CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
 
@@ -571,13 +569,13 @@ config MACH_SMDK2443
 	help
 	  Say Y here if you are using an SMDK2443
 
-endif	# CPU_S3C2443
+endif # CPU_S3C2443
 
 config PM_H1940
 	bool
 	help
 	  Internal node for H1940 and related PM
 
-endmenu	# Samsung S3C24XX SoCs Support
+endmenu # "Samsung S3C24XX SoCs Support"
 
-endif	# ARCH_S3C24XX
+endif # ARCH_S3C24XX
-- 
2.32.0

[PATCH 3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation

[Juerg Haefliger]

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
---
 arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index af01675d8769..bbaa8ff3367b 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -99,7 +99,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -109,7 +109,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -200,7 +200,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -209,7 +209,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -255,7 +255,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -287,21 +287,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
-- 
2.32.0

RE: [PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs

[Alim Akhtar]

Thanks Juerg for your patch.

>-----Original Message-----
>From: Juerg Haefliger [mailto:juerg.haefliger@canonical.com]
>Sent: Monday, May 23, 2022 12:13 PM
>To: krzysztof.kozlowski@linaro.org; alim.akhtar@samsung.com;
>linux@armlinux.org.uk; linux-arm-kernel@lists.infradead.org; linux-samsung-
>soc@vger.kernel.org
>Cc: linux-kernel@vger.kernel.org; Juerg Haefliger <juergh@canonical.com>
>Subject: [PATCH 2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace
>some tabs
>
>The convention for indentation seems to be a single tab. Help text is
further
>indented by an additional two whitespaces. Fix the lines that violate these
>rules.
>
>While add it, replace tabs before comments with whitespaces and squeeze
>multiple empty lines.
>
>Signed-off-by: Juerg Haefliger <juergh@canonical.com>
>---
> arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
> 1 file changed, 12 insertions(+), 14 deletions(-)
>
>diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-
>s3c/Kconfig.s3c24xx
>index 000e3e234f71..a7625e772905 100644
>--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
>+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
>@@ -17,8 +17,6 @@ config PLAT_S3C24XX
> 	help
> 	  Base platform code for any Samsung S3C24XX device
>
>-
>-
> menu "Samsung S3C24XX SoCs Support"
>
> comment "S3C24XX SoCs"
>@@ -268,7 +266,7 @@ config MACH_VR1000
> 	help
> 	  Say Y here if you are using the Thorcom VR1000 board.
>
>-endif	# CPU_S3C2410
>+endif # CPU_S3C2410
>
> config S3C2412_PM_SLEEP
> 	bool
>@@ -342,7 +340,7 @@ config MACH_VSTMS
> 	help
> 	  Say Y here if you are using an VSTMS board
>
>-endif	# CPU_S3C2412
>+endif # CPU_S3C2412
>
> if CPU_S3C2416
>
>@@ -390,7 +388,7 @@ config MACH_S3C2416_DT
> 	  Note: This is under development and not all peripherals can be
>supported
> 	  with this machine file.
>
>-endif	# CPU_S3C2416
>+endif # CPU_S3C2416
>
> if CPU_S3C2440 || CPU_S3C2442
>
>@@ -419,7 +417,7 @@ config S3C2440_PLL_16934400
> 	default y if S3C24XX_PLL
> 	help
> 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
>-endif
>+endif # CPU_S3C2440 || CPU_S3C2442
>

This change is more then what commit message tells, so please mention these
in the commit message as well
Rest looks fine to me.


> if CPU_S3C2440
>
>@@ -515,7 +513,7 @@ config SMDK2440_CPU2440
> 	default y if ARCH_S3C2440
> 	select S3C2440_XTAL_16934400
>
>-endif	# CPU_S3C2440
>+endif # CPU_S3C2440
>
> if CPU_S3C2442
>
>@@ -535,7 +533,7 @@ config MACH_NEO1973_GTA02
> 	select S3C24XX_PWM
> 	select S3C_DEV_USB_HOST
> 	help
>-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM
>Phone
>+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM
>+Phone
>
> config MACH_RX1950
> 	bool "HP iPAQ rx1950"
>@@ -547,9 +545,9 @@ config MACH_RX1950
> 	select S3C24XX_PWM
> 	select S3C_DEV_NAND
> 	help
>-	   Say Y here if you're using HP iPAQ rx1950
>+	  Say Y here if you're using HP iPAQ rx1950
>
>-endif	# CPU_S3C2442
>+endif # CPU_S3C2442
>
> if CPU_S3C2443 || CPU_S3C2416
>
>@@ -558,7 +556,7 @@ config S3C2443_SETUP_SPI
> 	help
> 	  Common setup code for SPI GPIO configurations
>
>-endif	# CPU_S3C2443 || CPU_S3C2416
>+endif # CPU_S3C2443 || CPU_S3C2416
>
> if CPU_S3C2443
>
>@@ -571,13 +569,13 @@ config MACH_SMDK2443
> 	help
> 	  Say Y here if you are using an SMDK2443
>
>-endif	# CPU_S3C2443
>+endif # CPU_S3C2443
>
> config PM_H1940
> 	bool
> 	help
> 	  Internal node for H1940 and related PM
>
>-endmenu	# Samsung S3C24XX SoCs Support
>+endmenu # "Samsung S3C24XX SoCs Support"
>
>-endif	# ARCH_S3C24XX
>+endif # ARCH_S3C24XX
>--
>2.32.0

Re: [PATCH 0/3] ARM: s3c: Kconfig: Style cleanups

[Krzysztof Kozlowski]

On Mon, 23 May 2022 08:42:49 +0200, Juerg Haefliger wrote:
> The majority of the Kconfig files use a single tab for basic indentation
> and a single tab followed by two whitespaces for help text indentation.
> Fix the lines that don't follow this convention.
> 
> While at it, add missing trailing comments to endif statements and replace
> tabs before comments with whitespaces (which seems to be more common).
> 
> [...]

Applied, thanks!

[1/3] ARM: s3c: Kconfig: Fix indentation
      https://git.kernel.org/krzk/linux/c/076702da7e8a2472f8ac86f1179ddcc5e90febae
[3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
      (no commit info)

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Re: [PATCH 0/3] ARM: s3c: Kconfig: Style cleanups

[Krzysztof Kozlowski]

On 06/06/2022 11:13, Krzysztof Kozlowski wrote:
> On Mon, 23 May 2022 08:42:49 +0200, Juerg Haefliger wrote:
>> The majority of the Kconfig files use a single tab for basic indentation
>> and a single tab followed by two whitespaces for help text indentation.
>> Fix the lines that don't follow this convention.
>>
>> While at it, add missing trailing comments to endif statements and replace
>> tabs before comments with whitespaces (which seems to be more common).
>>
>> [...]
> 
> Applied, thanks!
> 
> [1/3] ARM: s3c: Kconfig: Fix indentation
>       https://git.kernel.org/krzk/linux/c/076702da7e8a2472f8ac86f1179ddcc5e90febae
> [3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
>       (no commit info)

...And dropped. This does not pass checkpatch. Please be sure you run
scripts/checkpatch on your contributions.

WARNING: From:/Signed-off-by: email address mismatch: 'From: Juerg
Haefliger <juerg.haefliger@canonical.com>' != 'Signed-off-by: Juerg
Haefliger <juergh@canonical.com>'


Best regards,
Krzysztof

Re: [PATCH 0/3] ARM: s3c: Kconfig: Style cleanups

[Juerg Haefliger]

[-- Attachment #1: Type: text/plain, Size: 1325 bytes --]

On Mon, 6 Jun 2022 11:14:28 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> On 06/06/2022 11:13, Krzysztof Kozlowski wrote:
> > On Mon, 23 May 2022 08:42:49 +0200, Juerg Haefliger wrote:  
> >> The majority of the Kconfig files use a single tab for basic indentation
> >> and a single tab followed by two whitespaces for help text indentation.
> >> Fix the lines that don't follow this convention.
> >>
> >> While at it, add missing trailing comments to endif statements and replace
> >> tabs before comments with whitespaces (which seems to be more common).
> >>
> >> [...]  
> > 
> > Applied, thanks!
> > 
> > [1/3] ARM: s3c: Kconfig: Fix indentation
> >       https://git.kernel.org/krzk/linux/c/076702da7e8a2472f8ac86f1179ddcc5e90febae
> > [3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
> >       (no commit info)  
> 
> ...And dropped. This does not pass checkpatch. Please be sure you run
> scripts/checkpatch on your contributions.

I did and the check passed but email aliases don't work well in this scenario.
Will fix and resubmit.

...Juerg


> WARNING: From:/Signed-off-by: email address mismatch: 'From: Juerg
> Haefliger <juerg.haefliger@canonical.com>' != 'Signed-off-by: Juerg
> Haefliger <juergh@canonical.com>'
> 
> 
> Best regards,
> Krzysztof


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH 0/3 v3] ARM: s3c: Kconfig: Style cleanups

[Juerg Haefliger]

The majority of the Kconfig files use a single tab for basic indentation
and a single tab followed by two whitespaces for help text indentation.
Fix the lines that don't follow this convention.

While at it, add missing trailing comments to endif statements and replace
tabs before comments with whitespaces (which seems to be more common).

v3:
  - Match sob and author email addresses.
  - Rebase to next-20220609.
v2 (patch 2 only):
  - Mention additional changes in the commit message.

Juerg Haefliger (3):
  ARM: s3c: Kconfig: Fix indentation
  ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
  ARM: s3c: Kconfig.s3c64xx: Fix indentation

 arch/arm/mach-s3c/Kconfig         | 14 +++++++-------
 arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
 arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 3 files changed, 27 insertions(+), 29 deletions(-)

-- 
2.32.0

[PATCH 1/3 v3] ARM: s3c: Kconfig: Fix indentation

[Juerg Haefliger]

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
---
 arch/arm/mach-s3c/Kconfig | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 54548c051402..a64143574546 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -43,12 +43,12 @@ config SAMSUNG_ATAGS
 	def_bool n
 	depends on ATAGS
 	help
-	   This option enables ATAGS based boot support code for
-	   Samsung platforms, including static platform devices, legacy
-	   clock, timer and interrupt initialization, etc.
+	  This option enables ATAGS based boot support code for
+	  Samsung platforms, including static platform devices, legacy
+	  clock, timer and interrupt initialization, etc.
 
-	   Platforms that support only DT based boot need not to select
-	   this option.
+	  Platforms that support only DT based boot need not to select
+	  this option.
 
 if SAMSUNG_ATAGS
 
@@ -102,7 +102,7 @@ config S3C_DEV_HSMMC3
 config S3C_DEV_HWMON
 	bool
 	help
-	    Compile in platform device definitions for HWMON
+	  Compile in platform device definitions for HWMON
 
 config S3C_DEV_I2C1
 	bool
@@ -194,7 +194,7 @@ config S3C64XX_DEV_SPI0
 config SAMSUNG_DEV_TS
 	bool
 	help
-	    Common in platform device definitions for touchscreen device
+	  Common in platform device definitions for touchscreen device
 
 config SAMSUNG_DEV_KEYPAD
 	bool
-- 
2.32.0

[PATCH 2/3 v3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs

[Juerg Haefliger]

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

While add it, replace tabs before comments with whitespaces (which seems to
be more common), add a missing trailing endif comment and squeeze multiple
empty lines.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
---
v2:
  Mention additional changes in the commit message.  
---
 arch/arm/mach-s3c/Kconfig.s3c24xx | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
index 662c5aec2ea3..ba8f4f7101de 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c24xx
@@ -37,8 +37,6 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
-
-
 menu "Samsung S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -293,7 +291,7 @@ config MACH_VR1000
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
-endif	# CPU_S3C2410
+endif # CPU_S3C2410
 
 config S3C2412_PM_SLEEP
 	bool
@@ -367,7 +365,7 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-endif	# CPU_S3C2412
+endif # CPU_S3C2412
 
 if CPU_S3C2416
 
@@ -415,7 +413,7 @@ config MACH_S3C2416_DT
 	  Note: This is under development and not all peripherals can be supported
 	  with this machine file.
 
-endif	# CPU_S3C2416
+endif # CPU_S3C2416
 
 if CPU_S3C2440 || CPU_S3C2442
 
@@ -444,7 +442,7 @@ config S3C2440_PLL_16934400
 	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif
+endif # CPU_S3C2440 || CPU_S3C2442
 
 if CPU_S3C2440
 
@@ -540,7 +538,7 @@ config SMDK2440_CPU2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 
-endif	# CPU_S3C2440
+endif # CPU_S3C2440
 
 if CPU_S3C2442
 
@@ -559,7 +557,7 @@ config MACH_NEO1973_GTA02
 	select POWER_SUPPLY
 	select S3C_DEV_USB_HOST
 	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
@@ -570,9 +568,9 @@ config MACH_RX1950
 	select S3C2440_XTAL_16934400
 	select S3C_DEV_NAND
 	help
-	   Say Y here if you're using HP iPAQ rx1950
+	  Say Y here if you're using HP iPAQ rx1950
 
-endif	# CPU_S3C2442
+endif # CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
@@ -581,7 +579,7 @@ config S3C2443_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations
 
-endif	# CPU_S3C2443 || CPU_S3C2416
+endif # CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443
 
@@ -594,13 +592,13 @@ config MACH_SMDK2443
 	help
 	  Say Y here if you are using an SMDK2443
 
-endif	# CPU_S3C2443
+endif # CPU_S3C2443
 
 config PM_H1940
 	bool
 	help
 	  Internal node for H1940 and related PM
 
-endmenu	# Samsung S3C24XX SoCs Support
+endmenu # "Samsung S3C24XX SoCs Support"
 
-endif	# ARCH_S3C24XX
+endif # ARCH_S3C24XX
-- 
2.32.0

[PATCH 3/3 v3] ARM: s3c: Kconfig.s3c64xx: Fix indentation

[Juerg Haefliger]

The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.

Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
---
arch/arm/mach-s3c/Kconfig.s3c64xx | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 2b27bff4d928..bfc222f5bcd9 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -104,7 +104,7 @@ config S3C64XX_SETUP_SDHCI_GPIO
 config S3C64XX_SETUP_SPI
 	bool
 	help
-	 Common setup code for SPI GPIO configurations
+	  Common setup code for SPI GPIO configurations
 
 config S3C64XX_SETUP_USB_PHY
 	bool
@@ -114,7 +114,7 @@ config S3C64XX_SETUP_USB_PHY
 # S36400 Macchine support
 
 config MACH_SMDK6400
-       bool "SMDK6400"
+	bool "SMDK6400"
 	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
@@ -205,7 +205,7 @@ config SMDK6410_SD_CH0
 	bool "Use channel 0 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON7 (channel 0) as the MMC/SD slot, as
+	  Select CON7 (channel 0) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -214,7 +214,7 @@ config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
 	help
-          Select CON6 (channel 1) as the MMC/SD slot, as
+	  Select CON6 (channel 1) as the MMC/SD slot, as
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
@@ -260,7 +260,7 @@ config MACH_NCP
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	help
-          Machine support for the Samsung NCP
+	  Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
@@ -292,21 +292,21 @@ config MACH_SMARTQ
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
 	help
-	    Shared machine support for SmartQ 5/7
+	  Shared machine support for SmartQ 5/7
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 5
+	  Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
 	depends on ATAGS
 	select MACH_SMARTQ
 	help
-	    Machine support for the SmartQ 7
+	  Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
-- 
2.32.0

Re: [PATCH 0/3 v3] ARM: s3c: Kconfig: Style cleanups

[Krzysztof Kozlowski]

On Thu, 9 Jun 2022 10:21:51 +0200, Juerg Haefliger wrote:
> The majority of the Kconfig files use a single tab for basic indentation
> and a single tab followed by two whitespaces for help text indentation.
> Fix the lines that don't follow this convention.
> 
> While at it, add missing trailing comments to endif statements and replace
> tabs before comments with whitespaces (which seems to be more common).
> 
> [...]

Applied, thanks!

[1/3] ARM: s3c: Kconfig: Fix indentation
      https://git.kernel.org/krzk/linux/c/1afde294a99d3dd2a2aa4e28d15590755927f66e
[2/3] ARM: s3c: Kconfig.s3c24xx: Fix indentation and replace some tabs
      https://git.kernel.org/krzk/linux/c/48bf4b8497419f5b9a29da19c72e00dc2b8d498c
[3/3] ARM: s3c: Kconfig.s3c64xx: Fix indentation
      https://git.kernel.org/krzk/linux/c/d1065293010a010261f0b1478daff40d5a3dc241

Best regards,
-- 
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>