* [PATCH v11 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
2022-05-23 7:40 [PATCH v11 0/3] mmc: mediatek: add support for SDIO async IRQ Axe Yang
@ 2022-05-23 7:40 ` Axe Yang
2022-05-23 9:32 ` AngeloGioacchino Del Regno
2022-05-23 7:40 ` [PATCH v11 2/3] mmc: core: Add support for SDIO wakeup interrupt Axe Yang
2022-05-23 7:40 ` [PATCH v11 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ Axe Yang
2 siblings, 1 reply; 6+ messages in thread
From: Axe Yang @ 2022-05-23 7:40 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring, Chaotian Jing, Matthias Brugger, Adrian Hunter
Cc: Yoshihiro Shimoda, Satya Tangirala, Andy Shevchenko,
Wolfram Sang, Axe Yang, Lucas Stach, Eric Biggers,
Andrew Jeffery, Stephen Boyd, Kiwoong Kim, Yue Hu, Tian Tao,
angelogioacchino.delregno, linux-mmc, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek,
Project_Global_Chrome_Upstream_Group
Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
This feature allow SDIO devices alarm asynchronous interrupt to host
even when host stop providing clock to SDIO card. An extra wakeup
interrupt and pinctrl states for SDIO DAT1 pin state switching are
required in this scenario.
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
.../devicetree/bindings/mmc/mtk-sd.yaml | 50 ++++++++++++++++++-
1 file changed, 49 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 2a2e9fa8c188..e83bf10281d6 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -72,12 +72,27 @@ properties:
- const: ahb_cg
interrupts:
- maxItems: 1
+ description:
+ Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+ interrupt is required and be configured as wakeup source irq.
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: msdc
+ - const: sdio_wakeup
pinctrl-names:
+ description:
+ Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+ will be switched between GPIO mode and SDIO DAT1 mode, state_eint and state_dat1 are
+ mandatory in this scenarios.
+ minItems: 2
items:
- const: default
- const: state_uhs
+ - const: state_eint
pinctrl-0:
description:
@@ -89,6 +104,11 @@ properties:
should contain uhs mode pin ctrl.
maxItems: 1
+ pinctrl-2:
+ description:
+ should switch dat1 pin to GPIO mode.
+ maxItems: 1
+
assigned-clocks:
description:
PLL of the source clock.
@@ -208,4 +228,32 @@ examples:
mediatek,hs400-cmd-resp-sel-rising;
};
+ mmc3: mmc@11260000 {
+ compatible = "mediatek,mt8173-mmc";
+ reg = <0x11260000 0x1000>;
+ clock-names = "source", "hclk";
+ clocks = <&pericfg CLK_PERI_MSDC30_3>,
+ <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+ interrupt-names = "msdc", "sdio_wakeup";
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+ <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default", "state_uhs", "state_eint";
+ pinctrl-0 = <&mmc2_pins_default>;
+ pinctrl-1 = <&mmc2_pins_uhs>;
+ pinctrl-2 = <&mmc2_pins_eint>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr104;
+ keep-power-in-suspend;
+ wakeup-source;
+ cap-sdio-irq;
+ no-mmc;
+ no-sd;
+ non-removable;
+ vmmc-supply = <&sdio_fixed_3v3>;
+ vqmmc-supply = <&mt6397_vgp3_reg>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ };
+
...
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v11 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties
2022-05-23 7:40 ` [PATCH v11 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties Axe Yang
@ 2022-05-23 9:32 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 6+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-05-23 9:32 UTC (permalink / raw)
To: Axe Yang, Ulf Hansson, Rob Herring, Chaotian Jing,
Matthias Brugger, Adrian Hunter
Cc: Yoshihiro Shimoda, Satya Tangirala, Andy Shevchenko,
Wolfram Sang, Lucas Stach, Eric Biggers, Andrew Jeffery,
Stephen Boyd, Kiwoong Kim, Yue Hu, Tian Tao, linux-mmc,
devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
Project_Global_Chrome_Upstream_Group
Il 23/05/22 09:40, Axe Yang ha scritto:
> Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
> This feature allow SDIO devices alarm asynchronous interrupt to host
> even when host stop providing clock to SDIO card. An extra wakeup
> interrupt and pinctrl states for SDIO DAT1 pin state switching are
> required in this scenario.
>
> Signed-off-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v11 2/3] mmc: core: Add support for SDIO wakeup interrupt
2022-05-23 7:40 [PATCH v11 0/3] mmc: mediatek: add support for SDIO async IRQ Axe Yang
2022-05-23 7:40 ` [PATCH v11 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties Axe Yang
@ 2022-05-23 7:40 ` Axe Yang
2022-05-23 7:40 ` [PATCH v11 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ Axe Yang
2 siblings, 0 replies; 6+ messages in thread
From: Axe Yang @ 2022-05-23 7:40 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring, Chaotian Jing, Matthias Brugger, Adrian Hunter
Cc: Yoshihiro Shimoda, Satya Tangirala, Andy Shevchenko,
Wolfram Sang, Axe Yang, Lucas Stach, Eric Biggers,
Andrew Jeffery, Stephen Boyd, Kiwoong Kim, Yue Hu, Tian Tao,
angelogioacchino.delregno, linux-mmc, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek,
Project_Global_Chrome_Upstream_Group
If wakeup-source flag is set in host dts node, parse EAI information
from SDIO CCCR interrupt externsion segment for in-band wakeup. If
async interrupt is supported by SDIO card then enable it and set
enable_async_irq flag in sdio_cccr structure to 1. The parse flow is
implemented in sdio_read_cccr().
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
drivers/mmc/core/sdio.c | 14 ++++++++++++++
include/linux/mmc/card.h | 8 +++++++-
include/linux/mmc/sdio.h | 5 +++++
3 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 25799accf8a0..165d8b3c3a96 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -226,6 +226,20 @@ static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
if (data & SDIO_DRIVE_SDTD)
card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, &data);
+ if (ret)
+ goto out;
+
+ if (data & SDIO_INTERRUPT_EXT_SAI) {
+ data |= SDIO_INTERRUPT_EXT_EAI;
+ ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT,
+ data, NULL);
+ if (ret)
+ goto out;
+
+ card->cccr.enable_async_irq = 1;
+ }
}
/* if no uhs mode ensure we check for high speed */
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 37f975875102..968650c0b345 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -219,7 +219,8 @@ struct sdio_cccr {
wide_bus:1,
high_power:1,
high_speed:1,
- disable_cd:1;
+ disable_cd:1,
+ enable_async_irq:1;
};
struct sdio_cis {
@@ -343,6 +344,11 @@ static inline bool mmc_large_sector(struct mmc_card *card)
return card->ext_csd.data_sector_size == 4096;
}
+static inline int mmc_card_enable_async_irq(struct mmc_card *card)
+{
+ return card->cccr.enable_async_irq;
+}
+
bool mmc_card_is_blockaddr(struct mmc_card *card);
#define mmc_card_mmc(c) ((c)->type == MMC_TYPE_MMC)
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 2a05d1ac4f0e..1ef400f28642 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -159,6 +159,11 @@
#define SDIO_DTSx_SET_TYPE_A (1 << SDIO_DRIVE_DTSx_SHIFT)
#define SDIO_DTSx_SET_TYPE_C (2 << SDIO_DRIVE_DTSx_SHIFT)
#define SDIO_DTSx_SET_TYPE_D (3 << SDIO_DRIVE_DTSx_SHIFT)
+
+#define SDIO_CCCR_INTERRUPT_EXT 0x16
+#define SDIO_INTERRUPT_EXT_SAI (1 << 0)
+#define SDIO_INTERRUPT_EXT_EAI (1 << 1)
+
/*
* Function Basic Registers (FBR)
*/
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v11 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ
2022-05-23 7:40 [PATCH v11 0/3] mmc: mediatek: add support for SDIO async IRQ Axe Yang
2022-05-23 7:40 ` [PATCH v11 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties Axe Yang
2022-05-23 7:40 ` [PATCH v11 2/3] mmc: core: Add support for SDIO wakeup interrupt Axe Yang
@ 2022-05-23 7:40 ` Axe Yang
2022-05-23 9:32 ` AngeloGioacchino Del Regno
2 siblings, 1 reply; 6+ messages in thread
From: Axe Yang @ 2022-05-23 7:40 UTC (permalink / raw)
To: Ulf Hansson, Rob Herring, Chaotian Jing, Matthias Brugger, Adrian Hunter
Cc: Yoshihiro Shimoda, Satya Tangirala, Andy Shevchenko,
Wolfram Sang, Axe Yang, Lucas Stach, Eric Biggers,
Andrew Jeffery, Stephen Boyd, Kiwoong Kim, Yue Hu, Tian Tao,
angelogioacchino.delregno, linux-mmc, devicetree, linux-kernel,
linux-arm-kernel, linux-mediatek,
Project_Global_Chrome_Upstream_Group, Yong Mao
Add support for eint IRQ when MSDC is used as an SDIO host. This
feature requires SDIO device support async IRQ function. With this
feature, SDIO host can be awakened by SDIO card in suspend state,
without additional pin.
MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
resume, switch GPIO function back to DAT1 mode then turn on clock.
Some device tree property should be added or modified in MSDC node
to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since
this feature depends on asynchronous interrupts, "wakeup-source",
"keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and
the interrupts list should be extended(the interrupt named with
sdio_wakeup):
&mmcX {
...
interrupt-names = "msdc", "sdio_wakeup";
interrupts-extended = <...>,
<&pio xxx IRQ_TYPE_LEVEL_LOW>;
...
pinctrl-names = "default", "state_uhs", "state_eint";
...
pinctrl-2 = <&mmc2_pins_eint>;
...
cap-sdio-irq;
keep-power-in-suspend;
wakeup-source;
...
};
Co-developed-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
---
drivers/mmc/host/mtk-sd.c | 80 ++++++++++++++++++++++++++++++++++++---
1 file changed, 74 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 195dc897188b..1233adb1bd0c 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2014-2015 MediaTek Inc.
+ * Copyright (c) 2014-2015, 2022 MediaTek Inc.
* Author: Chaotian.Jing <chaotian.jing@mediatek.com>
*/
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -440,8 +441,10 @@ struct msdc_host {
struct pinctrl *pinctrl;
struct pinctrl_state *pins_default;
struct pinctrl_state *pins_uhs;
+ struct pinctrl_state *pins_eint;
struct delayed_work req_timeout;
int irq; /* host interrupt */
+ int eint_irq; /* interrupt from sdio device for waking up system */
struct reset_control *reset;
struct clk *src_clk; /* msdc source clock */
@@ -1520,17 +1523,41 @@ static void __msdc_enable_sdio_irq(struct msdc_host *host, int enb)
static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
{
- unsigned long flags;
struct msdc_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ int ret;
spin_lock_irqsave(&host->lock, flags);
__msdc_enable_sdio_irq(host, enb);
spin_unlock_irqrestore(&host->lock, flags);
- if (enb)
- pm_runtime_get_noresume(host->dev);
- else
- pm_runtime_put_noidle(host->dev);
+ if (mmc_card_enable_async_irq(mmc->card) && host->pins_eint) {
+ if (enb) {
+ pinctrl_select_state(host->pinctrl, host->pins_eint);
+ ret = dev_pm_set_dedicated_wake_irq_reverse(host->dev, host->eint_irq);
+
+ if (ret) {
+ dev_err(host->dev, "Failed to register SDIO wakeup irq!\n");
+ host->pins_eint = NULL;
+ pm_runtime_get_noresume(host->dev);
+ } else {
+ dev_info(host->dev, "SDIO eint irq: %d!\n", host->eint_irq);
+ device_init_wakeup(host->dev, true);
+ }
+
+ pinctrl_select_state(host->pinctrl, host->pins_uhs);
+ } else {
+ dev_pm_clear_wake_irq(host->dev);
+ }
+ } else {
+ if (enb) {
+ /* Ensure host->pins_eint is NULL */
+ kfree(host->pins_eint);
+ pm_runtime_get_noresume(host->dev);
+ } else {
+ pm_runtime_put_noidle(host->dev);
+ }
+ }
}
static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
@@ -2631,6 +2658,19 @@ static int msdc_drv_probe(struct platform_device *pdev)
goto host_free;
}
+ /* Support for SDIO eint irq ? */
+ if ((mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) && (mmc->pm_caps & MMC_PM_KEEP_POWER)) {
+ host->eint_irq = platform_get_irq_byname(pdev, "sdio_wakeup");
+ if (host->eint_irq > 0) {
+ host->pins_eint = pinctrl_lookup_state(host->pinctrl, "state_eint");
+ if (IS_ERR(host->pins_eint)) {
+ dev_err_probe(&pdev->dev, PTR_ERR(host->pins_eint),
+ "Cannot find pinctrl eint!\n");
+ host->pins_eint = NULL;
+ }
+ }
+ }
+
msdc_of_property_parse(pdev, host);
host->dev = &pdev->dev;
@@ -2845,6 +2885,12 @@ static int __maybe_unused msdc_runtime_suspend(struct device *dev)
struct msdc_host *host = mmc_priv(mmc);
msdc_save_reg(host);
+
+ if (sdio_irq_claimed(mmc) && host->pins_eint) {
+ disable_irq(host->irq);
+ pinctrl_select_state(host->pinctrl, host->pins_eint);
+ sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ }
msdc_gate_clock(host);
return 0;
}
@@ -2860,12 +2906,19 @@ static int __maybe_unused msdc_runtime_resume(struct device *dev)
return ret;
msdc_restore_reg(host);
+
+ if (sdio_irq_claimed(mmc) && host->pins_eint) {
+ sdr_set_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
+ pinctrl_select_state(host->pinctrl, host->pins_uhs);
+ enable_irq(host->irq);
+ }
return 0;
}
static int __maybe_unused msdc_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct msdc_host *host = mmc_priv(mmc);
int ret;
if (mmc->caps2 & MMC_CAP2_CQE) {
@@ -2874,11 +2927,26 @@ static int __maybe_unused msdc_suspend(struct device *dev)
return ret;
}
+ if (sdio_irq_claimed(mmc) && host->pins_eint) {
+ pm_runtime_put_sync_suspend(dev);
+
+ return 0;
+ }
+
return pm_runtime_force_suspend(dev);
}
static int __maybe_unused msdc_resume(struct device *dev)
{
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct msdc_host *host = mmc_priv(mmc);
+
+ if (sdio_irq_claimed(mmc) && host->pins_eint) {
+ pm_runtime_get_sync(dev);
+
+ return 0;
+ }
+
return pm_runtime_force_resume(dev);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v11 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ
2022-05-23 7:40 ` [PATCH v11 3/3] mmc: mediatek: add support for SDIO eint wakup IRQ Axe Yang
@ 2022-05-23 9:32 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 6+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-05-23 9:32 UTC (permalink / raw)
To: Axe Yang, Ulf Hansson, Rob Herring, Chaotian Jing,
Matthias Brugger, Adrian Hunter
Cc: Yoshihiro Shimoda, Satya Tangirala, Andy Shevchenko,
Wolfram Sang, Lucas Stach, Eric Biggers, Andrew Jeffery,
Stephen Boyd, Kiwoong Kim, Yue Hu, Tian Tao, linux-mmc,
devicetree, linux-kernel, linux-arm-kernel, linux-mediatek,
Project_Global_Chrome_Upstream_Group, Yong Mao
Il 23/05/22 09:40, Axe Yang ha scritto:
> Add support for eint IRQ when MSDC is used as an SDIO host. This
> feature requires SDIO device support async IRQ function. With this
> feature, SDIO host can be awakened by SDIO card in suspend state,
> without additional pin.
>
> MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
> turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
> resume, switch GPIO function back to DAT1 mode then turn on clock.
>
> Some device tree property should be added or modified in MSDC node
> to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since
> this feature depends on asynchronous interrupts, "wakeup-source",
> "keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and
> the interrupts list should be extended(the interrupt named with
> sdio_wakeup):
> &mmcX {
> ...
> interrupt-names = "msdc", "sdio_wakeup";
> interrupts-extended = <...>,
> <&pio xxx IRQ_TYPE_LEVEL_LOW>;
> ...
> pinctrl-names = "default", "state_uhs", "state_eint";
> ...
> pinctrl-2 = <&mmc2_pins_eint>;
> ...
> cap-sdio-irq;
> keep-power-in-suspend;
> wakeup-source;
> ...
> };
>
> Co-developed-by: Yong Mao <yong.mao@mediatek.com>
> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> Signed-off-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
^ permalink raw reply [flat|nested] 6+ messages in thread