From: Sathvika Vasireddy <sv@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, jpoimboe@redhat.com,
peterz@infradead.org, mbenes@suse.cz, aik@ozlabs.ru,
mpe@ellerman.id.au, christophe.leroy@csgroup.eu,
rostedt@goodmis.org, naveen.n.rao@linux.vnet.ibm.com,
sv@linux.ibm.com
Subject: [RFC PATCH 3/4] objtool/powerpc: Enable objtool to be built on ppc
Date: Mon, 23 May 2022 23:25:47 +0530 [thread overview]
Message-ID: <20220523175548.922671-4-sv@linux.ibm.com> (raw)
In-Reply-To: <20220523175548.922671-1-sv@linux.ibm.com>
This patch adds [stub] implementations for required
functions, inorder to enable objtool build on powerpc.
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
---
arch/powerpc/Kconfig | 1 +
tools/objtool/arch/powerpc/Build | 2 +
tools/objtool/arch/powerpc/decode.c | 73 +++++++++++++++++++
.../arch/powerpc/include/arch/cfi_regs.h | 11 +++
tools/objtool/arch/powerpc/include/arch/elf.h | 8 ++
.../arch/powerpc/include/arch/endianness.h | 9 +++
.../arch/powerpc/include/arch/special.h | 21 ++++++
tools/objtool/arch/powerpc/special.c | 19 +++++
8 files changed, 144 insertions(+)
create mode 100644 tools/objtool/arch/powerpc/Build
create mode 100644 tools/objtool/arch/powerpc/decode.c
create mode 100644 tools/objtool/arch/powerpc/include/arch/cfi_regs.h
create mode 100644 tools/objtool/arch/powerpc/include/arch/elf.h
create mode 100644 tools/objtool/arch/powerpc/include/arch/endianness.h
create mode 100644 tools/objtool/arch/powerpc/include/arch/special.h
create mode 100644 tools/objtool/arch/powerpc/special.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 174edabb74fa..732a3f91ee5e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -232,6 +232,7 @@ config PPC
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_NMI if PERF_EVENTS || (PPC64 && PPC_BOOK3S)
select HAVE_OPTPROBES
+ select HAVE_OBJTOOL if PPC64
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if PPC64
select HAVE_PERF_REGS
diff --git a/tools/objtool/arch/powerpc/Build b/tools/objtool/arch/powerpc/Build
new file mode 100644
index 000000000000..d24d5636a5b8
--- /dev/null
+++ b/tools/objtool/arch/powerpc/Build
@@ -0,0 +1,2 @@
+objtool-y += decode.o
+objtool-y += special.o
diff --git a/tools/objtool/arch/powerpc/decode.c b/tools/objtool/arch/powerpc/decode.c
new file mode 100644
index 000000000000..e3b77a6ce357
--- /dev/null
+++ b/tools/objtool/arch/powerpc/decode.c
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <objtool/check.h>
+#include <objtool/elf.h>
+#include <objtool/arch.h>
+#include <objtool/warn.h>
+#include <objtool/builtin.h>
+
+unsigned long arch_dest_reloc_offset(int addend)
+{
+ return addend;
+}
+
+bool arch_callee_saved_reg(unsigned char reg)
+{
+ return false;
+}
+
+int arch_decode_hint_reg(u8 sp_reg, int *base)
+{
+ return 0;
+}
+
+const char *arch_nop_insn(int len)
+{
+ return NULL;
+}
+
+const char *arch_ret_insn(int len)
+{
+ return NULL;
+}
+
+int arch_decode_instruction(struct objtool_file *file, const struct section *sec,
+ unsigned long offset, unsigned int maxlen,
+ unsigned int *len, enum insn_type *type,
+ unsigned long *immediate,
+ struct list_head *ops_list)
+{
+ u32 insn;
+
+ *immediate = 0;
+ memcpy(&insn, sec->data->d_buf+offset, 4);
+ *len = 4;
+ *type = INSN_OTHER;
+
+ return 0;
+}
+
+unsigned long arch_jump_destination(struct instruction *insn)
+{
+ return insn->offset + insn->immediate;
+}
+
+void arch_initial_func_cfi_state(struct cfi_init_state *state)
+{
+ int i;
+
+ for (i = 0; i < CFI_NUM_REGS; i++) {
+ state->regs[i].base = CFI_UNDEFINED;
+ state->regs[i].offset = 0;
+ }
+
+ /* initial CFA (call frame address) */
+ state->cfa.base = CFI_SP;
+ state->cfa.offset = 0;
+
+ /* initial LR (return address) */
+ state->regs[CFI_RA].base = CFI_CFA;
+ state->regs[CFI_RA].offset = 0;
+}
diff --git a/tools/objtool/arch/powerpc/include/arch/cfi_regs.h b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
new file mode 100644
index 000000000000..59638ebeafc8
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/cfi_regs.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_CFI_REGS_H
+#define _OBJTOOL_CFI_REGS_H
+
+#define CFI_BP 1
+#define CFI_SP CFI_BP
+#define CFI_RA 32
+#define CFI_NUM_REGS 33
+
+#endif
diff --git a/tools/objtool/arch/powerpc/include/arch/elf.h b/tools/objtool/arch/powerpc/include/arch/elf.h
new file mode 100644
index 000000000000..3c8ebb7d2a6b
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/elf.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef _OBJTOOL_ARCH_ELF
+#define _OBJTOOL_ARCH_ELF
+
+#define R_NONE R_PPC_NONE
+
+#endif /* _OBJTOOL_ARCH_ELF */
diff --git a/tools/objtool/arch/powerpc/include/arch/endianness.h b/tools/objtool/arch/powerpc/include/arch/endianness.h
new file mode 100644
index 000000000000..7c362527da20
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/endianness.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _ARCH_ENDIANNESS_H
+#define _ARCH_ENDIANNESS_H
+
+#include <endian.h>
+
+#define __TARGET_BYTE_ORDER __LITTLE_ENDIAN
+
+#endif /* _ARCH_ENDIANNESS_H */
diff --git a/tools/objtool/arch/powerpc/include/arch/special.h b/tools/objtool/arch/powerpc/include/arch/special.h
new file mode 100644
index 000000000000..ffef9ada7133
--- /dev/null
+++ b/tools/objtool/arch/powerpc/include/arch/special.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _PPC_ARCH_SPECIAL_H
+#define _PPC_ARCH_SPECIAL_H
+
+#define EX_ENTRY_SIZE 8
+#define EX_ORIG_OFFSET 0
+#define EX_NEW_OFFSET 4
+
+#define JUMP_ENTRY_SIZE 16
+#define JUMP_ORIG_OFFSET 0
+#define JUMP_NEW_OFFSET 4
+#define JUMP_KEY_OFFSET 8
+
+#define ALT_ENTRY_SIZE 12
+#define ALT_ORIG_OFFSET 0
+#define ALT_NEW_OFFSET 4
+#define ALT_FEATURE_OFFSET 8
+#define ALT_ORIG_LEN_OFFSET 10
+#define ALT_NEW_LEN_OFFSET 11
+
+#endif /* _PPC_ARCH_SPECIAL_H */
diff --git a/tools/objtool/arch/powerpc/special.c b/tools/objtool/arch/powerpc/special.c
new file mode 100644
index 000000000000..e3e75cbab858
--- /dev/null
+++ b/tools/objtool/arch/powerpc/special.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <string.h>
+
+#include <objtool/special.h>
+#include <objtool/builtin.h>
+
+
+bool arch_support_alt_relocation(struct special_alt *special_alt,
+ struct instruction *insn,
+ struct reloc *reloc)
+{
+ return false;
+}
+
+struct reloc *arch_find_switch_table(struct objtool_file *file,
+ struct instruction *insn)
+{
+ return NULL;
+}
--
2.25.1
next prev parent reply other threads:[~2022-05-23 18:49 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-23 17:55 [RFC PATCH 0/4] objtool: Enable and implement --mcount option on powerpc Sathvika Vasireddy
2022-05-23 17:55 ` [RFC PATCH 1/4] objtool: Add --mnop as an option to --mcount Sathvika Vasireddy
2022-05-24 8:54 ` Christophe Leroy
2022-05-24 10:15 ` Naveen N. Rao
2022-05-24 10:20 ` Christophe Leroy
2022-05-24 10:31 ` Naveen N. Rao
2022-05-25 11:36 ` Peter Zijlstra
2022-05-26 11:51 ` Naveen N. Rao
2022-05-23 17:55 ` [RFC PATCH 2/4] objtool: Enable objtool to run only on files with ftrace enabled Sathvika Vasireddy
2022-05-24 8:57 ` Christophe Leroy
2022-05-24 10:53 ` Sathvika Vasireddy
2022-05-24 13:28 ` Christophe Leroy
2022-05-23 17:55 ` Sathvika Vasireddy [this message]
2022-05-24 9:13 ` [RFC PATCH 3/4] objtool/powerpc: Enable objtool to be built on ppc Christophe Leroy
2022-05-23 17:55 ` [RFC PATCH 4/4] objtool/powerpc: Add --mcount specific implementation Sathvika Vasireddy
2022-05-24 9:35 ` Christophe Leroy
2022-05-24 11:00 ` Sathvika Vasireddy
2022-05-24 13:33 ` Christophe Leroy
2022-05-25 17:27 ` Christophe Leroy
2022-05-31 6:20 ` Christophe Leroy
2022-06-16 13:34 ` Naveen N. Rao
2022-06-16 13:40 ` Christophe Leroy
2022-06-16 13:57 ` Peter Zijlstra
2022-06-16 14:06 ` Christophe Leroy
2022-06-17 14:04 ` Naveen N. Rao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220523175548.922671-4-sv@linux.ibm.com \
--to=sv@linux.ibm.com \
--cc=aik@ozlabs.ru \
--cc=christophe.leroy@csgroup.eu \
--cc=jpoimboe@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mbenes@suse.cz \
--cc=mpe@ellerman.id.au \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).