linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rahul T R <r-ravikumar@ti.com>
To: <robh+dt@kernel.org>, <nm@ti.com>, <vigneshr@ti.com>,
	<kishon@ti.com>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <lee.jones@linaro.org>, <rogerq@kernel.org>,
	<devicetree@vger.kernel.org>, <kristo@kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <s-anna@ti.com>,
	Sinthu Raja <sinthu.raja@ti.com>, Rahul T R <r-ravikumar@ti.com>
Subject: [PATCH 3/3] arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header
Date: Fri, 27 May 2022 14:05:56 +0530	[thread overview]
Message-ID: <20220527083556.18864-4-r-ravikumar@ti.com> (raw)
In-Reply-To: <20220527083556.18864-1-r-ravikumar@ti.com>

From: Sinthu Raja <sinthu.raja@ti.com>

Add pinmux required to bring out
i2c5, ehrpwm 2 and 3 and gpios on
40 pin RPi header on sk board

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 89 ++++++++++++++++++++++----
 1 file changed, 78 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index 98a55778f3fe..b913b18ae133 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -400,6 +400,57 @@
 			J721E_IOPAD(0x124, PIN_INPUT, 7) /* (Y24) PRG0_PRU1_GPO9.GPIO0_72 */
 		>;
 	};
+
+	main_i2c5_pins_default: main-i2c5-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x150, PIN_INPUT_PULLUP, 2) /* (Y26) PRG0_MDIO0_MDIO.I2C5_SCL */
+			J721E_IOPAD(0x154, PIN_INPUT_PULLUP, 2) /* (AA27) PRG0_MDIO0_MDC.I2C5_SDA */
+		>;
+	};
+
+	rpi_header_gpio0_pins_default: rpi-header-gpio0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x01c, PIN_INPUT, 7) /* (AD22) PRG1_PRU0_GPO6.GPIO0_7 */
+			J721E_IOPAD(0x120, PIN_INPUT, 7) /* (AA28) PRG0_PRU1_GPO8.GPIO0_71 */
+			J721E_IOPAD(0x14c, PIN_INPUT, 7) /* (AA29) PRG0_PRU1_GPO19.GPIO0_82 */
+			J721E_IOPAD(0x02c, PIN_INPUT, 7) /* (AD21) PRG1_PRU0_GPO10.GPIO0_11 */
+			J721E_IOPAD(0x198, PIN_INPUT, 7) /* (V25) RGMII6_TD1.GPIO0_101 */
+			J721E_IOPAD(0x1b0, PIN_INPUT, 7) /* (W24) RGMII6_RD1.GPIO0_107 */
+			J721E_IOPAD(0x1a0, PIN_INPUT, 7) /* (W29) RGMII6_TXC.GPIO0_103 */
+			J721E_IOPAD(0x008, PIN_INPUT, 7) /* (AG22) PRG1_PRU0_GPO1.GPIO0_2 */
+			J721E_IOPAD(0x1d0, PIN_INPUT, 7) /* (AA3) SPI0_D1.GPIO0_115 */
+			J721E_IOPAD(0x11c, PIN_INPUT, 7) /* (AA24) PRG0_PRU1_GPO7.GPIO0_70 */
+			J721E_IOPAD(0x148, PIN_INPUT, 7) /* (AA26) PRG0_PRU1_GPO18.GPIO0_81 */
+			J721E_IOPAD(0x004, PIN_INPUT, 7) /* (AC23) PRG1_PRU0_GPO0.GPIO0_1 */
+			J721E_IOPAD(0x014, PIN_INPUT, 7) /* (AH23) PRG1_PRU0_GPO4.GPIO0_5 */
+			J721E_IOPAD(0x020, PIN_INPUT, 7) /* (AE20) PRG1_PRU0_GPO7.GPIO0_8 */
+			J721E_IOPAD(0x19c, PIN_INPUT, 7) /* (W27) RGMII6_TD0.GPIO0_102 */
+			J721E_IOPAD(0x1b4, PIN_INPUT, 7) /* (W25) RGMII6_RD0.GPIO0_108 */
+			J721E_IOPAD(0x188, PIN_INPUT, 7) /* (Y28) RGMII6_TX_CTL.GPIO0_97 */
+			J721E_IOPAD(0x00c, PIN_INPUT, 7) /* (AF22) PRG1_PRU0_GPO2.GPIO0_3 */
+			J721E_IOPAD(0x010, PIN_INPUT, 7) /* (AJ23) PRG1_PRU0_GPO3.GPIO0_4 */
+		>;
+	};
+
+	rpi_header_gpio1_pins_default: rpi-header-gpio1-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x234, PIN_INPUT, 7) /* (U3) EXT_REFCLK1.GPIO1_12 */
+		>;
+	};
+
+	rpi_header_ehrpwm2_pins_default: rpi-header-ehrpwm2-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x178, PIN_INPUT, 6) /* (U27) RGMII5_RD3.EHRPWM2_A */
+			J721E_IOPAD(0x17c, PIN_INPUT, 6) /* (U24) RGMII5_RD2.EHRPWM2_B */
+		>;
+	};
+
+	rpi_header_ehrpwm3_pins_default: rpi-header-ehrpwm3-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x18c, PIN_INPUT, 6) /* (V23) RGMII6_RX_CTL.EHRPWM3_A */
+			J721E_IOPAD(0x190, PIN_INPUT, 6) /* (W23) RGMII6_TD3.EHRPWM3_B */
+		>;
+	};
 };
 
 &wkup_pmx0 {
@@ -631,11 +682,6 @@
 	status = "disabled";
 };
 
-&main_i2c5 {
-	/* Brought out on RPi Header */
-	status = "disabled";
-};
-
 &main_i2c6 {
 	/* Unused */
 	status = "disabled";
@@ -1138,18 +1184,39 @@
 	status = "disabled";
 };
 
-&main_ehrpwm2 {
+&main_ehrpwm4 {
 	status = "disabled";
 };
 
-&main_ehrpwm3 {
+&main_ehrpwm5 {
 	status = "disabled";
 };
 
-&main_ehrpwm4 {
-	status = "disabled";
+&main_gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio0_pins_default>;
 };
 
-&main_ehrpwm5 {
-	status = "disabled";
+&main_gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_gpio1_pins_default>;
+};
+
+&main_i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c5_pins_default>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_ehrpwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_ehrpwm2_pins_default>;
+	status = "okay";
+};
+
+&main_ehrpwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rpi_header_ehrpwm3_pins_default>;
+	status = "okay";
 };
-- 
2.17.1


      parent reply	other threads:[~2022-05-27  8:38 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-27  8:35 [PATCH 0/3] Enable RPi header on j721e sk Rahul T R
2022-05-27  8:35 ` [PATCH 1/3] dt-bindings: mfd: ti,j721e-system-controller: Add clock property Rahul T R
2022-05-29 14:14   ` Krzysztof Kozlowski
2022-05-30  7:33     ` Rahul T R
2022-05-27  8:35 ` [PATCH 2/3] arm64: dts: ti: k3-j721e-*: Add dts nodes for EHRPWMs Rahul T R
2022-05-27  8:35 ` Rahul T R [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220527083556.18864-4-r-ravikumar@ti.com \
    --to=r-ravikumar@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=s-anna@ti.com \
    --cc=sinthu.raja@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).