* [PATCH net] net/mlx5: fix invalid structure access
@ 2022-05-27 11:01 Alexander Lobakin
2022-05-27 22:29 ` Saeed Mahameed
0 siblings, 1 reply; 3+ messages in thread
From: Alexander Lobakin @ 2022-05-27 11:01 UTC (permalink / raw)
To: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni
Cc: Mark Bloch, Maor Gottlieb, netdev, linux-rdma, linux-kernel,
Alexander Lobakin
After pulling latest bpf-next, I started catching the following:
[ 577.465121] general protection fault, probably for non-canonical address 0x47454cd000065c49: 0000 [#1] SMP PTI
[ 577.465173] CPU: 0 PID: 339 Comm: kworker/0:2 Tainted: G I 5.18.0-rc7-bpf-next+ #91
[ 577.465211] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ 577.465249] Workqueue: events work_for_cpu_fn
[ 577.465276] RIP: 0010:next_phys_dev_lag+0x1f/0x100 [mlx5_core]
[ 577.465458] Code: 00 00 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 0f 1f 44 00 00 55 41 57 41 56 53 48 8b 9f f8 02 00 00 48 8b 83 38 03 00 00 31 ed <f6> 40 34 80 0f 84 b3 00 00 00 8b 40 4c 0f c8 a8 10 0f 84 a6 00 00
[ 577.465524] RSP: 0018:ffffbd020750bd58 EFLAGS: 00010246
[ 577.465548] RAX: 47454cd000065c15 RBX: ffff9c7d97bb0310 RCX: 0000000000000003
[ 577.465577] RDX: 0000000000000000 RSI: ffff9c80e7f6a1c0 RDI: ffff9c7daaea3800
[ 577.465606] RBP: 0000000000000000 R08: ffff9c80a396b400 R09: ffff9c80a396b400
[ 577.465634] R10: ffffffff910608e8 R11: ffffffffc0d41a00 R12: ffffbd020750bd80
[ 577.465662] R13: ffff9c7d802a4b40 R14: ffffffffc0d41a00 R15: ffff9c80e7f6a1c0
[ 577.465690] FS: 0000000000000000(0000) GS:ffff9c8890a00000(0000) knlGS:0000000000000000
[ 577.465722] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 577.465748] CR2: 00007fb1baf70fb8 CR3: 0000000b7a010001 CR4: 00000000007706f0
[ 577.465778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 577.465806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 577.465834] PKRU: 55555554
[ 577.465849] Call Trace:
[ 577.465865] <TASK>
[ 577.465881] ? mlx5_get_next_phys_dev_lag+0x80/0x80 [mlx5_core]
[ 577.466039] bus_find_device+0x88/0xc0
[ 577.466062] mlx5_get_next_phys_dev_lag+0x29/0x80 [mlx5_core]
[ 577.466193] mlx5_lag_add_mdev+0x45/0x340 [mlx5_core]
[ 577.466316] mlx5_load+0xf3/0x3c0 [mlx5_core]
[ 577.466436] mlx5_init_one+0x1b9/0x600 [mlx5_core]
[ 577.466557] probe_one+0xa0/0x1c0 [mlx5_core]
[ 577.466676] local_pci_probe+0x44/0xc0
[ 577.466701] work_for_cpu_fn+0x1a/0x40
[ 577.466723] process_one_work+0x1cc/0x380
[ 577.466745] worker_thread+0x2eb/0x400
[ 577.466766] ? worker_clr_flags+0x80/0x80
[ 577.466786] kthread+0xcc/0x100
[ 577.466804] ? kthread_blkcg+0x40/0x40
[ 577.466823] ret_from_fork+0x22/0x30
[ 577.466847] </TASK>
[ 577.466860] Modules linked in: mlx5_core(+) psample mlxfw tls pci_hyperv_intf qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp irdma coretemp kvm_intel ib_uverbs iTCO_wdt kvm intel_pmc_bxt irqbypass ib_core iTCO_vendor_support rapl intel_cstate ipmi_ssif ice i40e intel_uncore i2c_i801 mei_me joydev pcspkr ioatdma mei lpc_ich intel_pch_thermal i2c_smbus dca acpi_ipmi ipmi_si acpi_pad acpi_power_meter zram xfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ast drm_vram_helper drm_ttm_helper ttm wmi pkcs8_key_parser fuse ipmi_devintf ipmi_msghandler
[ 577.468965] ---[ end trace 0000000000000000 ]---
More precisely, sometimes it was nullptr deref at address 0x00000034
and sometimes general protection fault.
Bisect has lead to commit bc4c2f2e0179 ("net/mlx5: Lag, filter non
compatible devices"). However, turned out that those added cap
checks only revealed the already present problem:
mlx5_get_next_dev() doesn't perform any checks if a device belongs
to the mlx5 auxbus, starting dereferencing it as a structure
embedded into &mlx5_adev right from the start. Simple debug print
says the following:
[ 145.960793] irdma.gen_1 i40e.iwarp.0: next auxdev
[ 145.960800] irdma.gen_1 i40e.iwarp.0: no caps
[ 145.960804] irdma.gen_1 i40e.iwarp.1: next auxdev
[ 145.960807] irdma.gen_1 i40e.iwarp.1: no caps
[ 145.960810] irdma ice.roce.0: next auxdev
[ 145.960813] irdma ice.roce.0: no caps
[ 145.960816] irdma ice.roce.1: next auxdev
[ 145.960819] irdma ice.roce.1: no caps
[ 145.960822] irdma ice.roce.2: next auxdev
[ 145.960824] irdma ice.roce.2: no caps
[ 146.224222] irdma.gen_1 i40e.iwarp.0: next auxdev
[ 146.224228] irdma.gen_1 i40e.iwarp.0: no caps
[ 146.224231] irdma.gen_1 i40e.iwarp.1: next auxdev
[ 146.224233] irdma.gen_1 i40e.iwarp.1: no caps
[ 146.224236] irdma ice.roce.0: next auxdev
[ 146.224239] irdma ice.roce.0: no caps
[ 146.224243] irdma ice.roce.1: next auxdev
[ 146.224245] irdma ice.roce.1: no caps
[ 146.224247] irdma ice.roce.2: next auxdev
[ 146.224250] irdma ice.roce.2: no caps
[ 146.224252] auxiliary mlx5_core.eth.0: next auxdev
[ 146.735499] irdma.gen_1 i40e.iwarp.0: next auxdev
[ 146.735506] irdma.gen_1 i40e.iwarp.0: no caps
[ 146.735511] irdma.gen_1 i40e.iwarp.1: next auxdev
[ 146.735514] irdma.gen_1 i40e.iwarp.1: no caps
[ 146.735517] irdma ice.roce.0: next auxdev
[ 146.735520] irdma ice.roce.0: no caps
[ 146.735523] irdma ice.roce.1: next auxdev
[ 146.735525] irdma ice.roce.1: no caps
[ 146.735528] irdma ice.roce.2: next auxdev
[ 146.735530] irdma ice.roce.2: no caps
[ 146.735533] auxiliary mlx5_core.eth.0: next auxdev
[ 146.735537] auxiliary mlx5_core.rdma.0: next auxdev
[ 146.735540] auxiliary mlx5_core.eth.1: next auxdev
[ 146.735543] auxiliary mlx5_core.rdma.1: next auxdev
It was only a good luck previously that this wasn't triggering any
other faults. It is also not common I guess to have several auxbus
drivers on one machine :)
Anyways, fix this by filtering the devices passed from
bus_find_device(). In case with mlx5, they all have "mlx5_core"
prefix defined by %MLX5_ADEV_NAME, so use it here. The results:
[ 833.042660] auxiliary mlx5_core.eth.0: next auxdev
[ 833.042666] auxiliary mlx5_core.rdma.0: next auxdev
[ 833.042670] auxiliary mlx5_core.eth.1: next auxdev
[ 833.042673] auxiliary mlx5_core.rdma.1: next auxdev
[ 833.558869] auxiliary mlx5_core.eth.0: next auxdev
[ 833.558876] auxiliary mlx5_core.rdma.0: next auxdev
[ 833.558880] auxiliary mlx5_core.eth.1: next auxdev
[ 833.558882] auxiliary mlx5_core.rdma.1: next auxdev
[ 833.558886] auxiliary mlx5_core.eth.2: next auxdev
Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
Fixes: bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
---
drivers/net/ethernet/mellanox/mlx5/core/dev.c | 20 +++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
index 11f7c03ae81b..b9d13184ed7c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
@@ -573,16 +573,28 @@ static int _next_phys_dev(struct mlx5_core_dev *mdev,
static int next_phys_dev(struct device *dev, const void *data)
{
- struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
- struct mlx5_core_dev *mdev = madev->mdev;
+ const struct mlx5_adev *madev;
+ struct mlx5_core_dev *mdev;
+
+ if (!strstarts(dev_name(dev), MLX5_ADEV_NAME))
+ return 0;
+
+ madev = container_of(dev, struct mlx5_adev, adev.dev);
+ mdev = madev->mdev;
return _next_phys_dev(mdev, data);
}
static int next_phys_dev_lag(struct device *dev, const void *data)
{
- struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
- struct mlx5_core_dev *mdev = madev->mdev;
+ const struct mlx5_adev *madev;
+ struct mlx5_core_dev *mdev;
+
+ if (!strstarts(dev_name(dev), MLX5_ADEV_NAME))
+ return 0;
+
+ madev = container_of(dev, struct mlx5_adev, adev.dev);
+ mdev = madev->mdev;
if (!MLX5_CAP_GEN(mdev, vport_group_manager) ||
!MLX5_CAP_GEN(mdev, lag_master) ||
--
2.36.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net] net/mlx5: fix invalid structure access
2022-05-27 11:01 [PATCH net] net/mlx5: fix invalid structure access Alexander Lobakin
@ 2022-05-27 22:29 ` Saeed Mahameed
2022-05-30 9:53 ` Alexander Lobakin
0 siblings, 1 reply; 3+ messages in thread
From: Saeed Mahameed @ 2022-05-27 22:29 UTC (permalink / raw)
To: Alexander Lobakin
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Mark Bloch, Maor Gottlieb, netdev, linux-rdma, linux-kernel
On 27 May 13:01, Alexander Lobakin wrote:
>After pulling latest bpf-next, I started catching the following:
>
>[ 577.465121] general protection fault, probably for non-canonical address 0x47454cd000065c49: 0000 [#1] SMP PTI
>[ 577.465173] CPU: 0 PID: 339 Comm: kworker/0:2 Tainted: G I 5.18.0-rc7-bpf-next+ #91
>[ 577.465211] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
>[ 577.465249] Workqueue: events work_for_cpu_fn
>[ 577.465276] RIP: 0010:next_phys_dev_lag+0x1f/0x100 [mlx5_core]
>[ 577.465458] Code: 00 00 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 0f 1f 44 00 00 55 41 57 41 56 53 48 8b 9f f8 02 00 00 48 8b 83 38 03 00 00 31 ed <f6> 40 34 80 0f 84 b3 00 00 00 8b 40 4c 0f c8 a8 10 0f 84 a6 00 00
>[ 577.465524] RSP: 0018:ffffbd020750bd58 EFLAGS: 00010246
>[ 577.465548] RAX: 47454cd000065c15 RBX: ffff9c7d97bb0310 RCX: 0000000000000003
>[ 577.465577] RDX: 0000000000000000 RSI: ffff9c80e7f6a1c0 RDI: ffff9c7daaea3800
>[ 577.465606] RBP: 0000000000000000 R08: ffff9c80a396b400 R09: ffff9c80a396b400
>[ 577.465634] R10: ffffffff910608e8 R11: ffffffffc0d41a00 R12: ffffbd020750bd80
>[ 577.465662] R13: ffff9c7d802a4b40 R14: ffffffffc0d41a00 R15: ffff9c80e7f6a1c0
>[ 577.465690] FS: 0000000000000000(0000) GS:ffff9c8890a00000(0000) knlGS:0000000000000000
>[ 577.465722] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>[ 577.465748] CR2: 00007fb1baf70fb8 CR3: 0000000b7a010001 CR4: 00000000007706f0
>[ 577.465778] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>[ 577.465806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
>[ 577.465834] PKRU: 55555554
>[ 577.465849] Call Trace:
>[ 577.465865] <TASK>
>[ 577.465881] ? mlx5_get_next_phys_dev_lag+0x80/0x80 [mlx5_core]
>[ 577.466039] bus_find_device+0x88/0xc0
>[ 577.466062] mlx5_get_next_phys_dev_lag+0x29/0x80 [mlx5_core]
>[ 577.466193] mlx5_lag_add_mdev+0x45/0x340 [mlx5_core]
>[ 577.466316] mlx5_load+0xf3/0x3c0 [mlx5_core]
>[ 577.466436] mlx5_init_one+0x1b9/0x600 [mlx5_core]
>[ 577.466557] probe_one+0xa0/0x1c0 [mlx5_core]
>[ 577.466676] local_pci_probe+0x44/0xc0
>[ 577.466701] work_for_cpu_fn+0x1a/0x40
>[ 577.466723] process_one_work+0x1cc/0x380
>[ 577.466745] worker_thread+0x2eb/0x400
>[ 577.466766] ? worker_clr_flags+0x80/0x80
>[ 577.466786] kthread+0xcc/0x100
>[ 577.466804] ? kthread_blkcg+0x40/0x40
>[ 577.466823] ret_from_fork+0x22/0x30
>[ 577.466847] </TASK>
>[ 577.466860] Modules linked in: mlx5_core(+) psample mlxfw tls pci_hyperv_intf qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp irdma coretemp kvm_intel ib_uverbs iTCO_wdt kvm intel_pmc_bxt irqbypass ib_core iTCO_vendor_support rapl intel_cstate ipmi_ssif ice i40e intel_uncore i2c_i801 mei_me joydev pcspkr ioatdma mei lpc_ich intel_pch_thermal i2c_smbus dca acpi_ipmi ipmi_si acpi_pad acpi_power_meter zram xfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ast drm_vram_helper drm_ttm_helper ttm wmi pkcs8_key_parser fuse ipmi_devintf ipmi_msghandler
>[ 577.468965] ---[ end trace 0000000000000000 ]---
>
>More precisely, sometimes it was nullptr deref at address 0x00000034
>and sometimes general protection fault.
>Bisect has lead to commit bc4c2f2e0179 ("net/mlx5: Lag, filter non
>compatible devices"). However, turned out that those added cap
>checks only revealed the already present problem:
>mlx5_get_next_dev() doesn't perform any checks if a device belongs
>to the mlx5 auxbus, starting dereferencing it as a structure
>embedded into &mlx5_adev right from the start. Simple debug print
>says the following:
>
>[ 145.960793] irdma.gen_1 i40e.iwarp.0: next auxdev
>[ 145.960800] irdma.gen_1 i40e.iwarp.0: no caps
>[ 145.960804] irdma.gen_1 i40e.iwarp.1: next auxdev
>[ 145.960807] irdma.gen_1 i40e.iwarp.1: no caps
>[ 145.960810] irdma ice.roce.0: next auxdev
>[ 145.960813] irdma ice.roce.0: no caps
>[ 145.960816] irdma ice.roce.1: next auxdev
>[ 145.960819] irdma ice.roce.1: no caps
>[ 145.960822] irdma ice.roce.2: next auxdev
>[ 145.960824] irdma ice.roce.2: no caps
>[ 146.224222] irdma.gen_1 i40e.iwarp.0: next auxdev
>[ 146.224228] irdma.gen_1 i40e.iwarp.0: no caps
>[ 146.224231] irdma.gen_1 i40e.iwarp.1: next auxdev
>[ 146.224233] irdma.gen_1 i40e.iwarp.1: no caps
>[ 146.224236] irdma ice.roce.0: next auxdev
>[ 146.224239] irdma ice.roce.0: no caps
>[ 146.224243] irdma ice.roce.1: next auxdev
>[ 146.224245] irdma ice.roce.1: no caps
>[ 146.224247] irdma ice.roce.2: next auxdev
>[ 146.224250] irdma ice.roce.2: no caps
>[ 146.224252] auxiliary mlx5_core.eth.0: next auxdev
>[ 146.735499] irdma.gen_1 i40e.iwarp.0: next auxdev
>[ 146.735506] irdma.gen_1 i40e.iwarp.0: no caps
>[ 146.735511] irdma.gen_1 i40e.iwarp.1: next auxdev
>[ 146.735514] irdma.gen_1 i40e.iwarp.1: no caps
>[ 146.735517] irdma ice.roce.0: next auxdev
>[ 146.735520] irdma ice.roce.0: no caps
>[ 146.735523] irdma ice.roce.1: next auxdev
>[ 146.735525] irdma ice.roce.1: no caps
>[ 146.735528] irdma ice.roce.2: next auxdev
>[ 146.735530] irdma ice.roce.2: no caps
>[ 146.735533] auxiliary mlx5_core.eth.0: next auxdev
>[ 146.735537] auxiliary mlx5_core.rdma.0: next auxdev
>[ 146.735540] auxiliary mlx5_core.eth.1: next auxdev
>[ 146.735543] auxiliary mlx5_core.rdma.1: next auxdev
>
>It was only a good luck previously that this wasn't triggering any
>other faults. It is also not common I guess to have several auxbus
>drivers on one machine :)
>Anyways, fix this by filtering the devices passed from
>bus_find_device(). In case with mlx5, they all have "mlx5_core"
>prefix defined by %MLX5_ADEV_NAME, so use it here. The results:
>
>[ 833.042660] auxiliary mlx5_core.eth.0: next auxdev
>[ 833.042666] auxiliary mlx5_core.rdma.0: next auxdev
>[ 833.042670] auxiliary mlx5_core.eth.1: next auxdev
>[ 833.042673] auxiliary mlx5_core.rdma.1: next auxdev
>[ 833.558869] auxiliary mlx5_core.eth.0: next auxdev
>[ 833.558876] auxiliary mlx5_core.rdma.0: next auxdev
>[ 833.558880] auxiliary mlx5_core.eth.1: next auxdev
>[ 833.558882] auxiliary mlx5_core.rdma.1: next auxdev
>[ 833.558886] auxiliary mlx5_core.eth.2: next auxdev
>
>Fixes: a925b5e309c9 ("net/mlx5: Register mlx5 devices to auxiliary virtual bus")
>Fixes: bc4c2f2e0179 ("net/mlx5: Lag, filter non compatible devices")
>Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
>---
> drivers/net/ethernet/mellanox/mlx5/core/dev.c | 20 +++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
>index 11f7c03ae81b..b9d13184ed7c 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
>@@ -573,16 +573,28 @@ static int _next_phys_dev(struct mlx5_core_dev *mdev,
>
> static int next_phys_dev(struct device *dev, const void *data)
> {
>- struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
>- struct mlx5_core_dev *mdev = madev->mdev;
>+ const struct mlx5_adev *madev;
>+ struct mlx5_core_dev *mdev;
>+
>+ if (!strstarts(dev_name(dev), MLX5_ADEV_NAME))
>+ return 0;
>+
>+ madev = container_of(dev, struct mlx5_adev, adev.dev);
>+ mdev = madev->mdev;
We have a similar patch that is being reviewed internally.
I don't like comparing strings to match devices. Also this could cause mlx5
unwanted aux devices to be matched, e.g mlx5e, mlx5_ib, mlx5v, etc .., since
they all share the same prefix ? yes, no ?
We also have another patch/approach that is comparing drivers:
if (dev->driver != curr->device->driver)
return NULL;
But also this is under discussion.
I think the whole design of this function is wrong, it's being used to match
devices of type mlx5_core_dev which are pci devices, but it is using aux class
to lookup! It works since we always have some aux devices hanging on top of
mlx5_core pci devs and since all of them share the same wrapper structure
"mlx5_adev" we find the corresponding mdev "mlx5_core_dev" sort of correctly.
>
> return _next_phys_dev(mdev, data);
> }
>
> static int next_phys_dev_lag(struct device *dev, const void *data)
> {
>- struct mlx5_adev *madev = container_of(dev, struct mlx5_adev, adev.dev);
>- struct mlx5_core_dev *mdev = madev->mdev;
>+ const struct mlx5_adev *madev;
>+ struct mlx5_core_dev *mdev;
>+
>+ if (!strstarts(dev_name(dev), MLX5_ADEV_NAME))
>+ return 0;
>+
>+ madev = container_of(dev, struct mlx5_adev, adev.dev);
>+ mdev = madev->mdev;
>
> if (!MLX5_CAP_GEN(mdev, vport_group_manager) ||
> !MLX5_CAP_GEN(mdev, lag_master) ||
>--
>2.36.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH net] net/mlx5: fix invalid structure access
2022-05-27 22:29 ` Saeed Mahameed
@ 2022-05-30 9:53 ` Alexander Lobakin
0 siblings, 0 replies; 3+ messages in thread
From: Alexander Lobakin @ 2022-05-30 9:53 UTC (permalink / raw)
To: Saeed Mahameed
Cc: Alexander Lobakin, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Mark Bloch, Maor Gottlieb, netdev, linux-rdma,
linux-kernel
From: Saeed Mahameed <saeed@kernel.org>
Date: Fri, 27 May 2022 15:29:05 -0700
> On 27 May 13:01, Alexander Lobakin wrote:
> >After pulling latest bpf-next, I started catching the following:
[...]
> We have a similar patch that is being reviewed internally.
> I don't like comparing strings to match devices. Also this could cause mlx5
> unwanted aux devices to be matched, e.g mlx5e, mlx5_ib, mlx5v, etc .., since
> they all share the same prefix ? yes, no ?
>
> We also have another patch/approach that is comparing drivers:
>
> if (dev->driver != curr->device->driver)
> return NULL;
>
> But also this is under discussion.
Ok, I spotted that implementation in your repo at korg, hope it will
hit mainline trees soon.
>
> I think the whole design of this function is wrong, it's being used to match
> devices of type mlx5_core_dev which are pci devices, but it is using aux class
> to lookup! It works since we always have some aux devices hanging on top of
> mlx5_core pci devs and since all of them share the same wrapper structure
> "mlx5_adev" we find the corresponding mdev "mlx5_core_dev" sort of correctly.
[...]
> >--
> >2.36.1
Thanks,
Al
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-05-30 9:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-27 11:01 [PATCH net] net/mlx5: fix invalid structure access Alexander Lobakin
2022-05-27 22:29 ` Saeed Mahameed
2022-05-30 9:53 ` Alexander Lobakin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).