* [PATCH] dt-bindings: input: use generic node names
@ 2022-05-24 9:31 Krzysztof Kozlowski
2022-05-24 11:11 ` Andreas Kemnade
` (3 more replies)
0 siblings, 4 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-24 9:31 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Jeff LaBundy,
linux-input, devicetree, linux-kernel
Cc: Krzysztof Kozlowski, Andreas Kemnade
Devicetree specification expects nodes to have generic names, if
possible, so replace custom ones with something generic. For gpio-keys,
the more popular format is "key-xxx" instead of "xxx-key", so choose the
first one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Cc: Andreas Kemnade <andreas@kemnade.info>
---
.../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 4 ++--
Documentation/devicetree/bindings/input/gpio-keys.yaml | 4 ++--
Documentation/devicetree/bindings/input/iqs269a.yaml | 2 +-
Documentation/devicetree/bindings/input/iqs626a.yaml | 2 +-
.../devicetree/bindings/input/microchip,cap11xx.yaml | 2 +-
5 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 878464f128dc..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -57,7 +57,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- mpr121@5a {
+ touchkey@5a {
compatible = "fsl,mpr121-touchkey";
reg = <0x5a>;
interrupt-parent = <&gpio1>;
@@ -77,7 +77,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- mpr121@5a {
+ touchkey@5a {
compatible = "fsl,mpr121-touchkey";
reg = <0x5a>;
poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 7fe1966ea28a..93f601c58984 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -127,13 +127,13 @@ examples:
compatible = "gpio-keys";
autorepeat;
- up {
+ key-up {
label = "GPIO Key UP";
linux,code = <103>;
gpios = <&gpio1 0 1>;
};
- down {
+ key-down {
label = "GPIO Key DOWN";
linux,code = <108>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 9c154e5e1a91..d84d69f5455d 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -475,7 +475,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- iqs269a@44 {
+ touch@44 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
index 0cb736c541c9..dd727befe564 100644
--- a/Documentation/devicetree/bindings/input/iqs626a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -751,7 +751,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- iqs626a@44 {
+ touch@44 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index d5d6bced3148..96358b12f9b2 100644
--- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -112,7 +112,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- cap1188@28 {
+ touch@28 {
compatible = "microchip,cap1188";
interrupt-parent = <&gpio1>;
interrupts = <0 0>;
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] dt-bindings: input: use generic node names
2022-05-24 9:31 [PATCH] dt-bindings: input: use generic node names Krzysztof Kozlowski
@ 2022-05-24 11:11 ` Andreas Kemnade
2022-05-24 11:28 ` Krzysztof Kozlowski
2022-05-26 2:20 ` Rob Herring
` (2 subsequent siblings)
3 siblings, 1 reply; 7+ messages in thread
From: Andreas Kemnade @ 2022-05-24 11:11 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Jeff LaBundy,
linux-input, devicetree, linux-kernel
Hi,
On Tue, 24 May 2022 11:31:36 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
> index 7fe1966ea28a..93f601c58984 100644
> --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
> +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
> @@ -127,13 +127,13 @@ examples:
> compatible = "gpio-keys";
> autorepeat;
>
> - up {
> + key-up {
> label = "GPIO Key UP";
> linux,code = <103>;
> gpios = <&gpio1 0 1>;
> };
>
> - down {
> + key-down {
> label = "GPIO Key DOWN";
> linux,code = <108>;
> interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
hmm, what about changing
patternProperties:
".*":
to enforce this format instead of allowing anything?
Regards,
Andreas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] dt-bindings: input: use generic node names
2022-05-24 11:11 ` Andreas Kemnade
@ 2022-05-24 11:28 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-24 11:28 UTC (permalink / raw)
To: Andreas Kemnade
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, Jeff LaBundy,
linux-input, devicetree, linux-kernel
On 24/05/2022 13:11, Andreas Kemnade wrote:
> Hi,
>
> On Tue, 24 May 2022 11:31:36 +0200
> Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
>
>> diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
>> index 7fe1966ea28a..93f601c58984 100644
>> --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
>> +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
>> @@ -127,13 +127,13 @@ examples:
>> compatible = "gpio-keys";
>> autorepeat;
>>
>> - up {
>> + key-up {
>> label = "GPIO Key UP";
>> linux,code = <103>;
>> gpios = <&gpio1 0 1>;
>> };
>>
>> - down {
>> + key-down {
>> label = "GPIO Key DOWN";
>> linux,code = <108>;
>> interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> hmm, what about changing
> patternProperties:
> ".*":
>
> to enforce this format instead of allowing anything?
It will cause a lot, a lot of warnings, so first these would need to be
fixed in every DTS. That's also doable, might help if these gpio-keys
bindings need any other object like property.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] dt-bindings: input: use generic node names
2022-05-24 9:31 [PATCH] dt-bindings: input: use generic node names Krzysztof Kozlowski
2022-05-24 11:11 ` Andreas Kemnade
@ 2022-05-26 2:20 ` Rob Herring
2022-05-27 22:44 ` Jeff LaBundy
2022-05-28 20:41 ` Dmitry Torokhov
3 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2022-05-26 2:20 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Andreas Kemnade, linux-input, linux-kernel, Krzysztof Kozlowski,
devicetree, Rob Herring, Dmitry Torokhov, Jeff LaBundy
On Tue, 24 May 2022 11:31:36 +0200, Krzysztof Kozlowski wrote:
> Devicetree specification expects nodes to have generic names, if
> possible, so replace custom ones with something generic. For gpio-keys,
> the more popular format is "key-xxx" instead of "xxx-key", so choose the
> first one.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Cc: Andreas Kemnade <andreas@kemnade.info>
> ---
> .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 4 ++--
> Documentation/devicetree/bindings/input/gpio-keys.yaml | 4 ++--
> Documentation/devicetree/bindings/input/iqs269a.yaml | 2 +-
> Documentation/devicetree/bindings/input/iqs626a.yaml | 2 +-
> .../devicetree/bindings/input/microchip,cap11xx.yaml | 2 +-
> 5 files changed, 7 insertions(+), 7 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] dt-bindings: input: use generic node names
2022-05-24 9:31 [PATCH] dt-bindings: input: use generic node names Krzysztof Kozlowski
2022-05-24 11:11 ` Andreas Kemnade
2022-05-26 2:20 ` Rob Herring
@ 2022-05-27 22:44 ` Jeff LaBundy
2022-05-29 14:21 ` Krzysztof Kozlowski
2022-05-28 20:41 ` Dmitry Torokhov
3 siblings, 1 reply; 7+ messages in thread
From: Jeff LaBundy @ 2022-05-27 22:44 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, linux-input,
devicetree, linux-kernel, Andreas Kemnade
Hi Krzysztof,
On Tue, May 24, 2022 at 11:31:36AM +0200, Krzysztof Kozlowski wrote:
> Devicetree specification expects nodes to have generic names, if
> possible, so replace custom ones with something generic. For gpio-keys,
> the more popular format is "key-xxx" instead of "xxx-key", so choose the
> first one.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Cc: Andreas Kemnade <andreas@kemnade.info>
> ---
> .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 4 ++--
> Documentation/devicetree/bindings/input/gpio-keys.yaml | 4 ++--
> Documentation/devicetree/bindings/input/iqs269a.yaml | 2 +-
> Documentation/devicetree/bindings/input/iqs626a.yaml | 2 +-
For iqs*a.yaml:
Acked-by: Jeff LaBundy <jeff@labundy.com>
Does there happen to be a list of preferred names based on device
function, or is it simply a matter of what seems to be most common?
> .../devicetree/bindings/input/microchip,cap11xx.yaml | 2 +-
> 5 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
> index 878464f128dc..5139af287d3e 100644
> --- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
> +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
> @@ -57,7 +57,7 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> - mpr121@5a {
> + touchkey@5a {
> compatible = "fsl,mpr121-touchkey";
> reg = <0x5a>;
> interrupt-parent = <&gpio1>;
> @@ -77,7 +77,7 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> - mpr121@5a {
> + touchkey@5a {
> compatible = "fsl,mpr121-touchkey";
> reg = <0x5a>;
> poll-interval = <20>;
> diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
> index 7fe1966ea28a..93f601c58984 100644
> --- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
> +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
> @@ -127,13 +127,13 @@ examples:
> compatible = "gpio-keys";
> autorepeat;
>
> - up {
> + key-up {
> label = "GPIO Key UP";
> linux,code = <103>;
> gpios = <&gpio1 0 1>;
> };
>
> - down {
> + key-down {
> label = "GPIO Key DOWN";
> linux,code = <108>;
> interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
> index 9c154e5e1a91..d84d69f5455d 100644
> --- a/Documentation/devicetree/bindings/input/iqs269a.yaml
> +++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
> @@ -475,7 +475,7 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> - iqs269a@44 {
> + touch@44 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
> index 0cb736c541c9..dd727befe564 100644
> --- a/Documentation/devicetree/bindings/input/iqs626a.yaml
> +++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
> @@ -751,7 +751,7 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> - iqs626a@44 {
> + touch@44 {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
> index d5d6bced3148..96358b12f9b2 100644
> --- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
> +++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
> @@ -112,7 +112,7 @@ examples:
> #address-cells = <1>;
> #size-cells = <0>;
>
> - cap1188@28 {
> + touch@28 {
> compatible = "microchip,cap1188";
> interrupt-parent = <&gpio1>;
> interrupts = <0 0>;
> --
> 2.34.1
>
Kind regards,
Jeff LaBundy
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] dt-bindings: input: use generic node names
2022-05-24 9:31 [PATCH] dt-bindings: input: use generic node names Krzysztof Kozlowski
` (2 preceding siblings ...)
2022-05-27 22:44 ` Jeff LaBundy
@ 2022-05-28 20:41 ` Dmitry Torokhov
3 siblings, 0 replies; 7+ messages in thread
From: Dmitry Torokhov @ 2022-05-28 20:41 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Krzysztof Kozlowski, Jeff LaBundy, linux-input,
devicetree, linux-kernel, Andreas Kemnade
On Tue, May 24, 2022 at 11:31:36AM +0200, Krzysztof Kozlowski wrote:
> Devicetree specification expects nodes to have generic names, if
> possible, so replace custom ones with something generic. For gpio-keys,
> the more popular format is "key-xxx" instead of "xxx-key", so choose the
> first one.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
Applied, thank you.
--
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] dt-bindings: input: use generic node names
2022-05-27 22:44 ` Jeff LaBundy
@ 2022-05-29 14:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-05-29 14:21 UTC (permalink / raw)
To: Jeff LaBundy
Cc: Dmitry Torokhov, Rob Herring, Krzysztof Kozlowski, linux-input,
devicetree, linux-kernel, Andreas Kemnade
On 28/05/2022 00:44, Jeff LaBundy wrote:
> Hi Krzysztof,
>
> On Tue, May 24, 2022 at 11:31:36AM +0200, Krzysztof Kozlowski wrote:
>> Devicetree specification expects nodes to have generic names, if
>> possible, so replace custom ones with something generic. For gpio-keys,
>> the more popular format is "key-xxx" instead of "xxx-key", so choose the
>> first one.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> ---
>>
>> Cc: Andreas Kemnade <andreas@kemnade.info>
>> ---
>> .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 4 ++--
>> Documentation/devicetree/bindings/input/gpio-keys.yaml | 4 ++--
>> Documentation/devicetree/bindings/input/iqs269a.yaml | 2 +-
>> Documentation/devicetree/bindings/input/iqs626a.yaml | 2 +-
>
> For iqs*a.yaml:
>
> Acked-by: Jeff LaBundy <jeff@labundy.com>
>
> Does there happen to be a list of preferred names based on device
> function, or is it simply a matter of what seems to be most common?
Devicetree spec has examples of names, but of course it does not cover
many of cases. Here I chosen mixture of device function and most common
(e.g. touch for touch controller).
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-05-29 14:21 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-24 9:31 [PATCH] dt-bindings: input: use generic node names Krzysztof Kozlowski
2022-05-24 11:11 ` Andreas Kemnade
2022-05-24 11:28 ` Krzysztof Kozlowski
2022-05-26 2:20 ` Rob Herring
2022-05-27 22:44 ` Jeff LaBundy
2022-05-29 14:21 ` Krzysztof Kozlowski
2022-05-28 20:41 ` Dmitry Torokhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).