linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Clément Léger" <clement.leger@bootlin.com>
To: Alan Stern <stern@rowland.harvard.edu>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] usb: host: ohci-at91: add support to enter suspend using SMC
Date: Mon,  6 Jun 2022 16:18:02 +0200	[thread overview]
Message-ID: <20220606141802.165252-1-clement.leger@bootlin.com> (raw)

When Linux is running under OP-TEE, the SFR is set as secured and thus
the AT91_OHCIICR_USB_SUSPEND register isn't accessible. Add a SMC to
do the appropriate call to suspend the controller.
The SMC id is fetched from the device-tree property
"microchip,suspend-smc-id". if present, then the syscon regmap is not
used to enter suspend and a SMC is issued.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
---
 drivers/usb/host/ohci-at91.c | 69 ++++++++++++++++++++++++------------
 1 file changed, 46 insertions(+), 23 deletions(-)

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a24aea3d2759..e73fda4af278 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -13,6 +13,7 @@
  * This file is licenced under the GPL.
  */
 
+#include <linux/arm-smccc.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/gpio/consumer.h>
@@ -55,6 +56,7 @@ struct ohci_at91_priv {
 	bool clocked;
 	bool wakeup;		/* Saved wake-up state for resume */
 	struct regmap *sfr_regmap;
+	u32 smc_id;
 };
 /* interface and function clocks; sometimes also an AHB clock */
 
@@ -135,6 +137,19 @@ static void at91_stop_hc(struct platform_device *pdev)
 
 static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
 
+static u32 at91_dt_suspend_smc(struct device *dev)
+{
+	u32 smc_id;
+
+	if (!dev->of_node)
+		return 0;
+
+	if (of_property_read_u32(dev->of_node, "microchip,suspend-smc-id", &smc_id))
+		return 0;
+
+	return smc_id;
+}
+
 static struct regmap *at91_dt_syscon_sfr(void)
 {
 	struct regmap *regmap;
@@ -215,9 +230,13 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 		goto err;
 	}
 
-	ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
-	if (!ohci_at91->sfr_regmap)
-		dev_dbg(dev, "failed to find sfr node\n");
+	ohci_at91->smc_id = at91_dt_suspend_smc(dev);
+	if (!ohci_at91->smc_id)  {
+		dev_dbg(dev, "failed to find sfr suspend smc id, using regmap\n");
+		ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
+		if (!ohci_at91->sfr_regmap)
+			dev_dbg(dev, "failed to find sfr node\n");
+	}
 
 	board = hcd->self.controller->platform_data;
 	ohci = hcd_to_ohci(hcd);
@@ -303,24 +322,30 @@ static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
 	return length;
 }
 
-static int ohci_at91_port_suspend(struct regmap *regmap, u8 set)
+static int ohci_at91_port_suspend(struct ohci_at91_priv *ohci_at91, u8 set)
 {
+	struct regmap *regmap = ohci_at91->sfr_regmap;
 	u32 regval;
 	int ret;
 
-	if (!regmap)
-		return 0;
+	if (regmap) {
+		ret = regmap_read(regmap, AT91_SFR_OHCIICR, &regval);
+		if (ret)
+			return ret;
 
-	ret = regmap_read(regmap, AT91_SFR_OHCIICR, &regval);
-	if (ret)
-		return ret;
+		if (set)
+			regval |= AT91_OHCIICR_USB_SUSPEND;
+		else
+			regval &= ~AT91_OHCIICR_USB_SUSPEND;
 
-	if (set)
-		regval |= AT91_OHCIICR_USB_SUSPEND;
-	else
-		regval &= ~AT91_OHCIICR_USB_SUSPEND;
+		regmap_write(regmap, AT91_SFR_OHCIICR, regval);
+	} else if (ohci_at91->smc_id) {
+		struct arm_smccc_res res;
 
-	regmap_write(regmap, AT91_SFR_OHCIICR, regval);
+		arm_smccc_smc(ohci_at91->smc_id, set, 0, 0, 0, 0, 0, 0, &res);
+		if (res.a0)
+			return -EINVAL;
+	}
 
 	return 0;
 }
@@ -357,9 +382,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		case USB_PORT_FEAT_SUSPEND:
 			dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
-			if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
-				ohci_at91_port_suspend(ohci_at91->sfr_regmap,
-						       1);
+			if (valid_port(wIndex)) {
+				ohci_at91_port_suspend(ohci_at91, 1);
 				return 0;
 			}
 			break;
@@ -400,9 +424,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		case USB_PORT_FEAT_SUSPEND:
 			dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
-			if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
-				ohci_at91_port_suspend(ohci_at91->sfr_regmap,
-						       0);
+			if (valid_port(wIndex)) {
+				ohci_at91_port_suspend(ohci_at91, 0);
 				return 0;
 			}
 			break;
@@ -630,10 +653,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
 		/* flush the writes */
 		(void) ohci_readl (ohci, &ohci->regs->control);
 		msleep(1);
-		ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
+		ohci_at91_port_suspend(ohci_at91, 1);
 		at91_stop_clock(ohci_at91);
 	} else {
-		ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1);
+		ohci_at91_port_suspend(ohci_at91, 1);
 	}
 
 	return ret;
@@ -645,7 +668,7 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 	struct usb_hcd	*hcd = dev_get_drvdata(dev);
 	struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
 
-	ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0);
+	ohci_at91_port_suspend(ohci_at91, 0);
 
 	if (ohci_at91->wakeup)
 		disable_irq_wake(hcd->irq);
-- 
2.36.1


             reply	other threads:[~2022-06-06 14:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-06 14:18 Clément Léger [this message]
2022-06-06 18:12 ` [PATCH] usb: host: ohci-at91: add support to enter suspend using SMC Alan Stern
2022-06-07  7:07   ` Clément Léger
2022-06-07 13:22     ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220606141802.165252-1-clement.leger@bootlin.com \
    --to=clement.leger@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).