[PATCH v4 0/2] sched/fair: Wake task within the cluster when possible

[PATCH v4 0/2] sched/fair: Wake task within the cluster when possible

[Yicong Yang]

This is the follow-up work to support cluster scheduler. Previously
we have added cluster level in the scheduler for both ARM64[1] and
X86[2] to support load balance between clusters to bring more memory
bandwidth and decrease cache contention. This patchset, on the other
hand, takes care of wake-up path by giving CPUs within the same cluster
a try before scanning the whole LLC to benefit those tasks communicating
with each other.

[1] 778c558f49a2 ("sched: Add cluster scheduler level in core and related Kconfig for ARM64")
[2] 66558b730f25 ("sched: Add cluster scheduler level for x86")

Change since v3:
- fix compile error when !CONFIG_SCHED_CLUSTER, reported by lkp test.
Link: https://lore.kernel.org/lkml/20220608095758.60504-1-yangyicong@hisilicon.com/

Change since v2:
- leverage SIS_PROP to suspend redundant scanning when LLC is overloaded
- remove the ping-pong suppression
- address the comment from Tim, thanks.
Link: https://lore.kernel.org/lkml/20220126080947.4529-1-yangyicong@hisilicon.com/

Change since v1:
- regain the performance data based on v5.17-rc1
- rename cpus_share_cluster to cpus_share_resources per Vincent and Gautham, thanks!
Link: https://lore.kernel.org/lkml/20211215041149.73171-1-yangyicong@hisilicon.com/

Barry Song (2):
  sched: Add per_cpu cluster domain info and cpus_share_resources API
  sched/fair: Scan cluster before scanning LLC in wake-up path

 include/linux/sched/sd_flags.h |  7 ++++++
 include/linux/sched/topology.h |  8 ++++++-
 kernel/sched/core.c            | 12 ++++++++++
 kernel/sched/fair.c            | 44 +++++++++++++++++++++++++++++++---
 kernel/sched/sched.h           |  2 ++
 kernel/sched/topology.c        | 15 ++++++++++++
 6 files changed, 84 insertions(+), 4 deletions(-)

-- 
2.24.0

[PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Yicong Yang]

From: Barry Song <song.bao.hua@hisilicon.com>

Add per-cpu cluster domain info and cpus_share_resources() API.
This is the preparation for the optimization of select_idle_cpu()
on platforms with cluster scheduler level.

Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
---
 include/linux/sched/sd_flags.h |  7 +++++++
 include/linux/sched/topology.h |  8 +++++++-
 kernel/sched/core.c            | 12 ++++++++++++
 kernel/sched/sched.h           |  2 ++
 kernel/sched/topology.c        | 15 +++++++++++++++
 5 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/include/linux/sched/sd_flags.h b/include/linux/sched/sd_flags.h
index 57bde66d95f7..42ed454e8b18 100644
--- a/include/linux/sched/sd_flags.h
+++ b/include/linux/sched/sd_flags.h
@@ -109,6 +109,13 @@ SD_FLAG(SD_ASYM_CPUCAPACITY_FULL, SDF_SHARED_PARENT | SDF_NEEDS_GROUPS)
  */
 SD_FLAG(SD_SHARE_CPUCAPACITY, SDF_SHARED_CHILD | SDF_NEEDS_GROUPS)
 
+/*
+ * Domain members share CPU cluster (LLC tags or L2 cache)
+ *
+ * NEEDS_GROUPS: Clusters are shared between groups.
+ */
+SD_FLAG(SD_CLUSTER, SDF_NEEDS_GROUPS)
+
 /*
  * Domain members share CPU package resources (i.e. caches)
  *
diff --git a/include/linux/sched/topology.h b/include/linux/sched/topology.h
index 56cffe42abbc..df489a1db6b7 100644
--- a/include/linux/sched/topology.h
+++ b/include/linux/sched/topology.h
@@ -45,7 +45,7 @@ static inline int cpu_smt_flags(void)
 #ifdef CONFIG_SCHED_CLUSTER
 static inline int cpu_cluster_flags(void)
 {
-	return SD_SHARE_PKG_RESOURCES;
+	return SD_CLUSTER | SD_SHARE_PKG_RESOURCES;
 }
 #endif
 
@@ -178,6 +178,7 @@ cpumask_var_t *alloc_sched_domains(unsigned int ndoms);
 void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms);
 
 bool cpus_share_cache(int this_cpu, int that_cpu);
+bool cpus_share_resources(int this_cpu, int that_cpu);
 
 typedef const struct cpumask *(*sched_domain_mask_f)(int cpu);
 typedef int (*sched_domain_flags_f)(void);
@@ -231,6 +232,11 @@ static inline bool cpus_share_cache(int this_cpu, int that_cpu)
 	return true;
 }
 
+static inline bool cpus_share_resources(int this_cpu, int that_cpu)
+{
+	return true;
+}
+
 #endif	/* !CONFIG_SMP */
 
 #if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index bfa7452ca92e..79a6f012b0cf 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3808,6 +3808,18 @@ bool cpus_share_cache(int this_cpu, int that_cpu)
 	return per_cpu(sd_llc_id, this_cpu) == per_cpu(sd_llc_id, that_cpu);
 }
 
+/*
+ * Whether CPUs are share cache resources, which means LLC on non-cluster
+ * machines and LLC tag or L2 on machines with clusters.
+ */
+bool cpus_share_resources(int this_cpu, int that_cpu)
+{
+	if (this_cpu == that_cpu)
+		return true;
+
+	return per_cpu(sd_share_id, this_cpu) == per_cpu(sd_share_id, that_cpu);
+}
+
 static inline bool ttwu_queue_cond(int cpu, int wake_flags)
 {
 	/*
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 01259611beb9..b9bcfcf8d14d 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
 DECLARE_PER_CPU(int, sd_llc_size);
 DECLARE_PER_CPU(int, sd_llc_id);
+DECLARE_PER_CPU(int, sd_share_id);
 DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
+DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index 05b6c2ad90b9..0595827d481d 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
 DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
 DEFINE_PER_CPU(int, sd_llc_size);
 DEFINE_PER_CPU(int, sd_llc_id);
+DEFINE_PER_CPU(int, sd_share_id);
+DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
 DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
 DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
 DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
@@ -689,6 +691,18 @@ static void update_top_cache_domain(int cpu)
 	per_cpu(sd_llc_id, cpu) = id;
 	rcu_assign_pointer(per_cpu(sd_llc_shared, cpu), sds);
 
+	sd = lowest_flag_domain(cpu, SD_CLUSTER);
+	if (sd)
+		id = cpumask_first(sched_domain_span(sd));
+	rcu_assign_pointer(per_cpu(sd_cluster, cpu), sd);
+
+	/*
+	 * This assignment should be placed after the sd_llc_id as
+	 * we want this id equals to cluster id on cluster machines
+	 * but equals to LLC id on non-Cluster machines.
+	 */
+	per_cpu(sd_share_id, cpu) = id;
+
 	sd = lowest_flag_domain(cpu, SD_NUMA);
 	rcu_assign_pointer(per_cpu(sd_numa, cpu), sd);
 
@@ -1532,6 +1546,7 @@ static struct cpumask		***sched_domains_numa_masks;
  */
 #define TOPOLOGY_SD_FLAGS		\
 	(SD_SHARE_CPUCAPACITY	|	\
+	 SD_CLUSTER		|	\
 	 SD_SHARE_PKG_RESOURCES |	\
 	 SD_NUMA		|	\
 	 SD_ASYM_PACKING)
-- 
2.24.0

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Tim Chen]

On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
> 
>  
> +/*
> + * Whether CPUs are share cache resources, which means LLC on non-cluster
> + * machines and LLC tag or L2 on machines with clusters.
> + */
> +bool cpus_share_resources(int this_cpu, int that_cpu)

Suggest cpus_share_lowest_cache to be a bit more informative

> +{
> +	if (this_cpu == that_cpu)
> +		return true;
> +
> +	return per_cpu(sd_share_id, this_cpu) == per_cpu(sd_share_id, that_cpu);
> +}
> +
>  static inline bool ttwu_queue_cond(int cpu, int wake_flags)
>  {
>  	/*
> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> index 01259611beb9..b9bcfcf8d14d 100644
> --- a/kernel/sched/sched.h
> +++ b/kernel/sched/sched.h
> @@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>  DECLARE_PER_CPU(int, sd_llc_size);
>  DECLARE_PER_CPU(int, sd_llc_id);
> +DECLARE_PER_CPU(int, sd_share_id);
>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
> diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
> index 05b6c2ad90b9..0595827d481d 100644
> --- a/kernel/sched/topology.c
> +++ b/kernel/sched/topology.c
> @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>  DEFINE_PER_CPU(int, sd_llc_size);
>  DEFINE_PER_CPU(int, sd_llc_id);
> +DEFINE_PER_CPU(int, sd_share_id);

Some minor nits about the name of "sd_share_id".  
It is not quite obvious what it is.  

Maybe something like sd_lowest_cache_id to denote
it is the id of lowest shared cache domain between CPU. 

Otherwise the patch looks good to me.  You can add

Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>

Tim

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Yicong Yang]

On 2022/6/10 6:28, Tim Chen wrote:
> On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
>>
>>  
>> +/*
>> + * Whether CPUs are share cache resources, which means LLC on non-cluster
>> + * machines and LLC tag or L2 on machines with clusters.
>> + */
>> +bool cpus_share_resources(int this_cpu, int that_cpu)
> 
> Suggest cpus_share_lowest_cache to be a bit more informative
> 
>> +{
>> +	if (this_cpu == that_cpu)
>> +		return true;
>> +
>> +	return per_cpu(sd_share_id, this_cpu) == per_cpu(sd_share_id, that_cpu);
>> +}
>> +
>>  static inline bool ttwu_queue_cond(int cpu, int wake_flags)
>>  {
>>  	/*
>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>> index 01259611beb9..b9bcfcf8d14d 100644
>> --- a/kernel/sched/sched.h
>> +++ b/kernel/sched/sched.h
>> @@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>  DECLARE_PER_CPU(int, sd_llc_size);
>>  DECLARE_PER_CPU(int, sd_llc_id);
>> +DECLARE_PER_CPU(int, sd_share_id);
>>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>> diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
>> index 05b6c2ad90b9..0595827d481d 100644
>> --- a/kernel/sched/topology.c
>> +++ b/kernel/sched/topology.c
>> @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>  DEFINE_PER_CPU(int, sd_llc_size);
>>  DEFINE_PER_CPU(int, sd_llc_id);
>> +DEFINE_PER_CPU(int, sd_share_id);
> 
> Some minor nits about the name of "sd_share_id".  
> It is not quite obvious what it is.  
> 
> Maybe something like sd_lowest_cache_id to denote
> it is the id of lowest shared cache domain between CPU. 
> 

Thanks for the suggestion! Since Vincent and Gautham have suggested this in v1 [1], I'd like
to wait a bit before changing to this to see if they have any comment.

> Otherwise the patch looks good to me.  You can add
> 
> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
> 

Thanks.

[1] https://lore.kernel.org/lkml/CAKfTPtBKLDyNPXg7uLbQ3jUnEwppfC+E29=oJ1tWzzqHsNpApw@mail.gmail.com/

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[K Prateek Nayak]

Hello Yicong,

I replied to the v3 of the series by mistake!
(https://lore.kernel.org/lkml/0b065646-5b05-cbdb-b20c-e1dfef3f4d79@amd.com/)
But rest assured all the analysis discussed there was done with
the v4 patch series. I'll add the same observations below so we
can continue discussion on v4.

We are observing some serious regression with tbench with this patch
series applied. The issue doesn't seem to be related to the actual 
functionality of the patch but how the patch changes the per CPU
variable layout.

Discussed below are the results from running tbench on a dual
socket Zen3 (2 x 64C/128T) configured in different NPS modes.

NPS Modes are used to logically divide single socket into
multiple NUMA region.
Following is the NUMA configuration for each NPS mode on the system:

NPS1: Each socket is a NUMA node.
    Total 2 NUMA nodes in the dual socket machine.

    Node 0: 0-63,   128-191
    Node 1: 64-127, 192-255

NPS2: Each socket is further logically divided into 2 NUMA regions.
    Total 4 NUMA nodes exist over 2 socket.
   
    Node 0: 0-31,   128-159
    Node 1: 32-63,  160-191
    Node 2: 64-95,  192-223
    Node 3: 96-127, 223-255

NPS4: Each socket is logically divided into 4 NUMA regions.
    Total 8 NUMA nodes exist over 2 socket.
   
    Node 0: 0-15,    128-143
    Node 1: 16-31,   144-159
    Node 2: 32-47,   160-175
    Node 3: 48-63,   176-191
    Node 4: 64-79,   192-207
    Node 5: 80-95,   208-223
    Node 6: 96-111,  223-231
    Node 7: 112-127, 232-255

Benchmark Results:

Kernel versions:
- tip:      5.19.0-rc2 tip sched/core
- cluster:  5.19.0-rc2 tip sched/core + both the patches of the series

When we started testing, the tip was at:
commit: f3dd3f674555 "sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle"

* - Data points of concern

~~~~~~
tbench
~~~~~~

NPS1

Clients:       tip                     cluster
    1    444.41 (0.00 pct)       439.27 (-1.15 pct)
    2    879.23 (0.00 pct)       831.49 (-5.42 pct)     *
    4    1648.83 (0.00 pct)      1608.07 (-2.47 pct)
    8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)    *
   16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)   *
   32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)   *
   64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)  *
  128    30795.27 (0.00 pct)     30861.34 (0.21 pct)
  256    25138.43 (0.00 pct)     24711.90 (-1.69 pct)
  512    51287.93 (0.00 pct)     51855.55 (1.10 pct)
 1024    53176.97 (0.00 pct)     52554.55 (-1.17 pct)

NPS2

Clients:       tip                     cluster
    1    445.45 (0.00 pct)       441.75 (-0.83 pct)
    2    869.24 (0.00 pct)       845.61 (-2.71 pct)
    4    1644.28 (0.00 pct)      1586.49 (-3.51 pct)
    8    3120.83 (0.00 pct)      2967.01 (-4.92 pct) 	*
   16    5972.29 (0.00 pct)      5208.58 (-12.78 pct)   *
   32    11776.38 (0.00 pct)     10229.53 (-13.13 pct)  *
   64    20933.15 (0.00 pct)     17033.45 (-18.62 pct)  *
  128    32195.00 (0.00 pct)     29507.85 (-8.34 pct)   *
  256    24641.52 (0.00 pct)     27225.00 (10.48 pct)
  512    50806.96 (0.00 pct)     51377.50 (1.12 pct)
 1024    51993.96 (0.00 pct)     50773.35 (-2.34 pct)

NPS4

Clients:      tip                   cluster
    1    442.10 (0.00 pct)       435.06 (-1.59 pct)
    2    870.94 (0.00 pct)       858.64 (-1.41 pct)
    4    1615.30 (0.00 pct)      1607.27 (-0.49 pct)
    8    3195.95 (0.00 pct)      3020.63 (-5.48 pct)    *
   16    5937.41 (0.00 pct)      5719.87 (-3.66 pct)
   32    11800.41 (0.00 pct)     11229.65 (-4.83 pct)	*
   64    20844.71 (0.00 pct)     20432.79 (-1.97 pct)
  128    31003.62 (0.00 pct)     29441.20 (-5.03 pct)   *
  256    27476.37 (0.00 pct)     25857.30 (-5.89 pct)   * [Know to have run to run variance]
  512    52276.72 (0.00 pct)     51659.16 (-1.18 pct)
 1024    51372.10 (0.00 pct)     51026.87 (-0.67 pct)

Note: tbench results for 256 workers are known to have
run to run variation on the test machine. Any regression
seen for the data point can be safely ignored.

The behavior is consistent for both tip and patched kernel
across multiple runs of tbench.

~~~~~~~~~~~~~~~~~~~~
Analysis done so far
~~~~~~~~~~~~~~~~~~~~

To root cause this issue quicker, we have focused on 8 to 64 clients
data points with the machine running in NPS1 mode.

- Even on disabling HW prefetcher, the behavior remains consistent
  signifying HW prefetcher is not the cause of the problem.

- Bisecting:

When we ran the tests with only Patch 1 of the series, the
regression was visible and the numbers were worse.

Clients:       tip                     cluster              Patch 1 Only
    8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3018.63 (-7.51 pct)
   16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    4869.26 (-18.99 pct)
   32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    8159.60 (-32.33 pct)
   64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   13161.92 (-38.08 pct)

We further bisected the hunks to narrow down the cause to the per CPU
variable declarations. 


On 6/9/2022 5:36 PM, Yicong Yang wrote:
> 
> [..snip..]
>
> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> index 01259611beb9..b9bcfcf8d14d 100644
> --- a/kernel/sched/sched.h
> +++ b/kernel/sched/sched.h
> @@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>  DECLARE_PER_CPU(int, sd_llc_size);
>  DECLARE_PER_CPU(int, sd_llc_id);
> +DECLARE_PER_CPU(int, sd_share_id);
>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);

The main reason for the regression seems to be the above declarations.
The regression seem to go away if we do one of the following:

- Declare sd_share_id and sd_cluster using DECLARE_PER_CPU_READ_MOSTLY()
  instead of DECLARE_PER_CPU() and change the corresponding definition
  below to DEFINE_PER_CPU_READ_MOSTLY().

  Clients:       tip                     Patch 1           Patch 1 (READ_MOSTLY)
    8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3237.33 (-0.56 pct)
   16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    5914.53 (-2.92 pct)
   32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11536.05 (3.40 pct)
   64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   21162.33 (0.67 pct)

- Convert sd_share_id and sd_cluster to static arrays.
  
  Clients:       tip                    Patch 1            Patch 1 (Static Array)
    8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3203.27 (-1.61 pct)
   16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    6198.35 (1.73 pct)
   32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11385.76 (2.05 pct)
   64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   21919.80 (4.28 pct)

- Move the declarations of sd_share_id and sd_cluster to the top

  Clients:       tip                    Patch 1            Patch 1 (Declarion on Top)
    8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3072.30 (-5.63 pct)
   16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    5586.59 (-8.30 pct)
   32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11184.17 (0.24 pct)
   64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   20289.70 (-3.47 pct)

Unfortunately, none of these are complete solutions. For example, using
DECLARE_PER_CPU_READ_MOSTLY() with both patches applied reduces the regression
but doesn't eliminate it entirely:

   Clients:     tip                     cluster           cluster (READ_MOSTLY)  
    1      444.41 (0.00 pct)       439.27 (-1.15 pct)      435.95 (-1.90 pct)
    2      879.23 (0.00 pct)       831.49 (-5.42 pct)      842.09 (-4.22 pct)
    4      1648.83 (0.00 pct)      1608.07 (-2.47 pct)     1598.77 (-3.03 pct)
    8      3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3090.86 (-5.29 pct)	*
   16      6011.19 (0.00 pct)      5360.28 (-10.82 pct)    5360.28 (-10.82 pct)	*
   32      12058.31 (0.00 pct)     8769.08 (-27.27 pct)    11083.66 (-8.08 pct)	*
   64      21258.21 (0.00 pct)     19021.09 (-10.52 pct)   20984.30 (-1.28 pct)
  128      30795.27 (0.00 pct)     30861.34 (0.21 pct)     30735.20 (-0.19 pct)
  256      25138.43 (0.00 pct)     24711.90 (-1.69 pct)    24021.21 (-4.44 pct)
  512      51287.93 (0.00 pct)     51855.55 (1.10 pct)     51672.73 (0.75 pct)
 1024      53176.97 (0.00 pct)     52554.55 (-1.17 pct)    52620.02 (-1.04 pct)

We are still trying to root cause the underlying issue that
brought about such drastic regression in tbench performance. 

>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
> diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
> index 05b6c2ad90b9..0595827d481d 100644
> --- a/kernel/sched/topology.c
> +++ b/kernel/sched/topology.c
> @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>  DEFINE_PER_CPU(int, sd_llc_size);
>  DEFINE_PER_CPU(int, sd_llc_id);
> +DEFINE_PER_CPU(int, sd_share_id);
> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>
>  [..snip..]
>

We would like some time to investigate this issue and root cause
the reason for this regression.
--
Thanks and Regards,
Prateek

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Gautham R. Shenoy]

On Wed, Jun 15, 2022 at 07:49:22PM +0530, K Prateek Nayak wrote:

[..snip..]

> 
> - Bisecting:
> 
> When we ran the tests with only Patch 1 of the series, the
> regression was visible and the numbers were worse.
> 
> Clients:       tip                     cluster              Patch 1 Only
>     8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3018.63 (-7.51 pct)
>    16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    4869.26 (-18.99 pct)
>    32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    8159.60 (-32.33 pct)
>    64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   13161.92 (-38.08 pct)
> 
> We further bisected the hunks to narrow down the cause to the per CPU
> variable declarations. 
> 
> 
> >
> > diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> > index 01259611beb9..b9bcfcf8d14d 100644
> > --- a/kernel/sched/sched.h
> > +++ b/kernel/sched/sched.h
> > @@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
> >  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
> >  DECLARE_PER_CPU(int, sd_llc_size);
> >  DECLARE_PER_CPU(int, sd_llc_id);
> > +DECLARE_PER_CPU(int, sd_share_id);
> >  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> > +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
> 
> The main reason for the regression seems to be the above declarations.

I think you meant that the regressions are due to the DEFINE_PER_CPU()
instances from the following hunk:

> > @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
> >  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
> >  DEFINE_PER_CPU(int, sd_llc_size);
> >  DEFINE_PER_CPU(int, sd_llc_id);
> > +DEFINE_PER_CPU(int, sd_share_id);
> > +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
> >  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> >  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
> >  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
> >


The System.map diff for these variables between tip vs tip +
cluster-sched-v4 on your test system looks as follows:

 0000000000020520 D sd_asym_packing
 0000000000020528 D sd_numa
-0000000000020530 D sd_llc_shared
-0000000000020538 D sd_llc_id
-000000000002053c D sd_llc_size
-0000000000020540 D sd_llc
+0000000000020530 D sd_cluster
+0000000000020538 D sd_llc_shared
+0000000000020540 D sd_share_id
+0000000000020544 D sd_llc_id
+0000000000020548 D sd_llc_size
+0000000000020550 D sd_llc

The allocations are in the reverse-order of the definitions.

That perhaps explains why you no longer see the regression when you
define the sd_share_id and sd_cluster per-cpu definitions at the
beginning as indicated by the following

> - Move the declarations of sd_share_id and sd_cluster to the top
> 
>   Clients:       tip                    Patch 1            Patch 1 (Declarion on Top)
>     8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3072.30 (-5.63 pct)
>    16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    5586.59 (-8.30 pct)
>    32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11184.17 (0.24 pct)
>    64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   20289.70 (-3.47 pct)


--
Thanks and Regards
gautham.

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Yicong Yang]

On 2022/6/15 23:43, Gautham R. Shenoy wrote:
> On Wed, Jun 15, 2022 at 07:49:22PM +0530, K Prateek Nayak wrote:
> 
> [..snip..]
> 
>>
>> - Bisecting:
>>
>> When we ran the tests with only Patch 1 of the series, the
>> regression was visible and the numbers were worse.
>>
>> Clients:       tip                     cluster              Patch 1 Only
>>     8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3018.63 (-7.51 pct)
>>    16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    4869.26 (-18.99 pct)
>>    32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    8159.60 (-32.33 pct)
>>    64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   13161.92 (-38.08 pct)
>>
>> We further bisected the hunks to narrow down the cause to the per CPU
>> variable declarations. 
>>
>>
>>>
>>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>>> index 01259611beb9..b9bcfcf8d14d 100644
>>> --- a/kernel/sched/sched.h
>>> +++ b/kernel/sched/sched.h
>>> @@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>  DECLARE_PER_CPU(int, sd_llc_size);
>>>  DECLARE_PER_CPU(int, sd_llc_id);
>>> +DECLARE_PER_CPU(int, sd_share_id);
>>>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>
>> The main reason for the regression seems to be the above declarations.
> 
> I think you meant that the regressions are due to the DEFINE_PER_CPU()
> instances from the following hunk:
> 
>>> @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>  DEFINE_PER_CPU(int, sd_llc_size);
>>>  DEFINE_PER_CPU(int, sd_llc_id);
>>> +DEFINE_PER_CPU(int, sd_share_id);
>>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>
> 
> 
> The System.map diff for these variables between tip vs tip +
> cluster-sched-v4 on your test system looks as follows:
> 
>  0000000000020520 D sd_asym_packing
>  0000000000020528 D sd_numa
> -0000000000020530 D sd_llc_shared
> -0000000000020538 D sd_llc_id
> -000000000002053c D sd_llc_size
> -0000000000020540 D sd_llc
> +0000000000020530 D sd_cluster
> +0000000000020538 D sd_llc_shared

looks like below are in another cacheline (for 64B cacheline)?
while previous sd_llc_id and sd_llc_shared are in the same.

> +0000000000020540 D sd_share_id
> +0000000000020544 D sd_llc_id
> +0000000000020548 D sd_llc_size
> +0000000000020550 D sd_llc
> 
> The allocations are in the reverse-order of the definitions.
> 
> That perhaps explains why you no longer see the regression when you
> define the sd_share_id and sd_cluster per-cpu definitions at the
> beginning as indicated by the following
> 
>> - Move the declarations of sd_share_id and sd_cluster to the top
>>
>>   Clients:       tip                    Patch 1            Patch 1 (Declarion on Top)
>>     8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3072.30 (-5.63 pct)
>>    16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    5586.59 (-8.30 pct)
>>    32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11184.17 (0.24 pct)
>>    64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   20289.70 (-3.47 pct)
> 
> 
> --
> Thanks and Regards
> gautham.
> .
> 

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Yicong Yang]

Hi Prateek,

Seems my previous reply is in the wrong format so the server rejected it..just repost..

Thanks a lot for the test!

On 2022/6/15 22:19, K Prateek Nayak wrote:
> Hello Yicong,
> 
> I replied to the v3 of the series by mistake!
> (https://lore.kernel.org/lkml/0b065646-5b05-cbdb-b20c-e1dfef3f4d79@amd.com/)
> But rest assured all the analysis discussed there was done with
> the v4 patch series. I'll add the same observations below so we
> can continue discussion on v4.
> 
> We are observing some serious regression with tbench with this patch
> series applied. The issue doesn't seem to be related to the actual 
> functionality of the patch but how the patch changes the per CPU
> variable layout.
> 
> Discussed below are the results from running tbench on a dual
> socket Zen3 (2 x 64C/128T) configured in different NPS modes.
> 
> NPS Modes are used to logically divide single socket into
> multiple NUMA region.
> Following is the NUMA configuration for each NPS mode on the system:
> 
> NPS1: Each socket is a NUMA node.
>     Total 2 NUMA nodes in the dual socket machine.
> 
>     Node 0: 0-63,   128-191
>     Node 1: 64-127, 192-255
> 
> NPS2: Each socket is further logically divided into 2 NUMA regions.
>     Total 4 NUMA nodes exist over 2 socket.
>    
>     Node 0: 0-31,   128-159
>     Node 1: 32-63,  160-191
>     Node 2: 64-95,  192-223
>     Node 3: 96-127, 223-255
> 
> NPS4: Each socket is logically divided into 4 NUMA regions.
>     Total 8 NUMA nodes exist over 2 socket.
>    
>     Node 0: 0-15,    128-143
>     Node 1: 16-31,   144-159
>     Node 2: 32-47,   160-175
>     Node 3: 48-63,   176-191
>     Node 4: 64-79,   192-207
>     Node 5: 80-95,   208-223
>     Node 6: 96-111,  223-231
>     Node 7: 112-127, 232-255
> 
> Benchmark Results:
> 
> Kernel versions:
> - tip:      5.19.0-rc2 tip sched/core
> - cluster:  5.19.0-rc2 tip sched/core + both the patches of the series
> 
> When we started testing, the tip was at:
> commit: f3dd3f674555 "sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle"
> 
> * - Data points of concern
> 
> ~~~~~~
> tbench
> ~~~~~~
> 
> NPS1
> 
> Clients:       tip                     cluster
>     1    444.41 (0.00 pct)       439.27 (-1.15 pct)
>     2    879.23 (0.00 pct)       831.49 (-5.42 pct)     *
>     4    1648.83 (0.00 pct)      1608.07 (-2.47 pct)
>     8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)    *
>    16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)   *
>    32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)   *
>    64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)  *
>   128    30795.27 (0.00 pct)     30861.34 (0.21 pct)
>   256    25138.43 (0.00 pct)     24711.90 (-1.69 pct)
>   512    51287.93 (0.00 pct)     51855.55 (1.10 pct)
>  1024    53176.97 (0.00 pct)     52554.55 (-1.17 pct)
> 
> NPS2
> 
> Clients:       tip                     cluster
>     1    445.45 (0.00 pct)       441.75 (-0.83 pct)
>     2    869.24 (0.00 pct)       845.61 (-2.71 pct)
>     4    1644.28 (0.00 pct)      1586.49 (-3.51 pct)
>     8    3120.83 (0.00 pct)      2967.01 (-4.92 pct) 	*
>    16    5972.29 (0.00 pct)      5208.58 (-12.78 pct)   *
>    32    11776.38 (0.00 pct)     10229.53 (-13.13 pct)  *
>    64    20933.15 (0.00 pct)     17033.45 (-18.62 pct)  *
>   128    32195.00 (0.00 pct)     29507.85 (-8.34 pct)   *
>   256    24641.52 (0.00 pct)     27225.00 (10.48 pct)
>   512    50806.96 (0.00 pct)     51377.50 (1.12 pct)
>  1024    51993.96 (0.00 pct)     50773.35 (-2.34 pct)
> 
> NPS4
> 
> Clients:      tip                   cluster
>     1    442.10 (0.00 pct)       435.06 (-1.59 pct)
>     2    870.94 (0.00 pct)       858.64 (-1.41 pct)
>     4    1615.30 (0.00 pct)      1607.27 (-0.49 pct)
>     8    3195.95 (0.00 pct)      3020.63 (-5.48 pct)    *
>    16    5937.41 (0.00 pct)      5719.87 (-3.66 pct)
>    32    11800.41 (0.00 pct)     11229.65 (-4.83 pct)	*
>    64    20844.71 (0.00 pct)     20432.79 (-1.97 pct)
>   128    31003.62 (0.00 pct)     29441.20 (-5.03 pct)   *
>   256    27476.37 (0.00 pct)     25857.30 (-5.89 pct)   * [Know to have run to run variance]
>   512    52276.72 (0.00 pct)     51659.16 (-1.18 pct)
>  1024    51372.10 (0.00 pct)     51026.87 (-0.67 pct)
> 
> Note: tbench results for 256 workers are known to have
> run to run variation on the test machine. Any regression
> seen for the data point can be safely ignored.
> 
> The behavior is consistent for both tip and patched kernel
> across multiple runs of tbench.
> 
> ~~~~~~~~~~~~~~~~~~~~
> Analysis done so far
> ~~~~~~~~~~~~~~~~~~~~
> 
> To root cause this issue quicker, we have focused on 8 to 64 clients
> data points with the machine running in NPS1 mode.
> 
> - Even on disabling HW prefetcher, the behavior remains consistent
>   signifying HW prefetcher is not the cause of the problem.
> 
> - Bisecting:
> 
> When we ran the tests with only Patch 1 of the series, the
> regression was visible and the numbers were worse.
> 
> Clients:       tip                     cluster              Patch 1 Only
>     8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3018.63 (-7.51 pct)
>    16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    4869.26 (-18.99 pct)
>    32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    8159.60 (-32.33 pct)
>    64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   13161.92 (-38.08 pct)
> 
> We further bisected the hunks to narrow down the cause to the per CPU
> variable declarations. 
> 
> 
> On 6/9/2022 5:36 PM, Yicong Yang wrote:
>>
>> [..snip..]
>>
>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>> index 01259611beb9..b9bcfcf8d14d 100644
>> --- a/kernel/sched/sched.h
>> +++ b/kernel/sched/sched.h
>> @@ -1753,7 +1753,9 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>  DECLARE_PER_CPU(int, sd_llc_size);
>>  DECLARE_PER_CPU(int, sd_llc_id);
>> +DECLARE_PER_CPU(int, sd_share_id);
>>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
> 
> The main reason for the regression seems to be the above declarations.
> The regression seem to go away if we do one of the following:
> 
> - Declare sd_share_id and sd_cluster using DECLARE_PER_CPU_READ_MOSTLY()
>   instead of DECLARE_PER_CPU() and change the corresponding definition
>   below to DEFINE_PER_CPU_READ_MOSTLY().
> 
>   Clients:       tip                     Patch 1           Patch 1 (READ_MOSTLY)
>     8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3237.33 (-0.56 pct)
>    16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    5914.53 (-2.92 pct)
>    32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11536.05 (3.40 pct)
>    64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   21162.33 (0.67 pct)
> 
> - Convert sd_share_id and sd_cluster to static arrays.
>   
>   Clients:       tip                    Patch 1            Patch 1 (Static Array)
>     8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3203.27 (-1.61 pct)
>    16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    6198.35 (1.73 pct)
>    32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11385.76 (2.05 pct)
>    64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   21919.80 (4.28 pct)
> 
> - Move the declarations of sd_share_id and sd_cluster to the top
> 
>   Clients:       tip                    Patch 1            Patch 1 (Declarion on Top)
>     8      3255.69 (0.00 pct)      3018.63 (-7.28 pct)     3072.30 (-5.63 pct)
>    16      6092.67 (0.00 pct)      4869.26 (-20.08 pct)    5586.59 (-8.30 pct)
>    32      11156.56 (0.00 pct)     8159.60 (-26.86 pct)    11184.17 (0.24 pct)
>    64      21019.97 (0.00 pct)     13161.92 (-37.38 pct)   20289.70 (-3.47 pct)
> 
> Unfortunately, none of these are complete solutions. For example, using
> DECLARE_PER_CPU_READ_MOSTLY() with both patches applied reduces the regression
> but doesn't eliminate it entirely:
> 
>    Clients:     tip                     cluster           cluster (READ_MOSTLY)  
>     1      444.41 (0.00 pct)       439.27 (-1.15 pct)      435.95 (-1.90 pct)
>     2      879.23 (0.00 pct)       831.49 (-5.42 pct)      842.09 (-4.22 pct)
>     4      1648.83 (0.00 pct)      1608.07 (-2.47 pct)     1598.77 (-3.03 pct)
>     8      3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3090.86 (-5.29 pct)	*
>    16      6011.19 (0.00 pct)      5360.28 (-10.82 pct)    5360.28 (-10.82 pct)	*
>    32      12058.31 (0.00 pct)     8769.08 (-27.27 pct)    11083.66 (-8.08 pct)	*
>    64      21258.21 (0.00 pct)     19021.09 (-10.52 pct)   20984.30 (-1.28 pct)
>   128      30795.27 (0.00 pct)     30861.34 (0.21 pct)     30735.20 (-0.19 pct)
>   256      25138.43 (0.00 pct)     24711.90 (-1.69 pct)    24021.21 (-4.44 pct)
>   512      51287.93 (0.00 pct)     51855.55 (1.10 pct)     51672.73 (0.75 pct)
>  1024      53176.97 (0.00 pct)     52554.55 (-1.17 pct)    52620.02 (-1.04 pct)
> 
> We are still trying to root cause the underlying issue that
> brought about such drastic regression in tbench performance. 
> 
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>> diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
>> index 05b6c2ad90b9..0595827d481d 100644
>> --- a/kernel/sched/topology.c
>> +++ b/kernel/sched/topology.c
>> @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>  DEFINE_PER_CPU(int, sd_llc_size);
>>  DEFINE_PER_CPU(int, sd_llc_id);
>> +DEFINE_PER_CPU(int, sd_share_id);
>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>
>>  [..snip..]
>>
> 
> We would like some time to investigate this issue and root cause
> the reason for this regression.

One significant difference I can see for now is that Kunpeng 920 is a non-SMT machine while Zen3
is a SMT machine. So in the select_idle_sibling() path we won't use sd_llc_shared. Since sd_share_id
and sd_cluster are inserted between sd_llc_id and sd_llc_shared which are both used in the path on
your test, I guess the change of the layout may affect something like the cache behaviour.

Can you also test with SMT disabled? Or change the layout a bit to see if there's any difference,
like:

 DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
 DEFINE_PER_CPU(int, sd_llc_size);
 DEFINE_PER_CPU(int, sd_llc_id);
 DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
+DEFINE_PER_CPU(int, sd_share_id);
+DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
 DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
 DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);

I need to further look into it and have some tests on a SMT machine. Would you mind to share
the kernel config as well? I'd like to compare the config as well.

Thanks,
Yicong

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[K Prateek Nayak]

[-- Attachment #1: Type: text/plain, Size: 6584 bytes --]

Hello Yicong,

On 6/16/2022 1:25 PM, Yicong Yang wrote:
> Hi Prateek,
> 
> Seems my previous reply is in the wrong format so the server rejected it..just repost..
> 
> Thanks a lot for the test!

Thank you for looking into it and suggesting further steps
for debugging the issue.

>> [..snip..]
>>
>> We are still trying to root cause the underlying issue that
>> brought about such drastic regression in tbench performance. 
>>
>>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>>> diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
>>> index 05b6c2ad90b9..0595827d481d 100644
>>> --- a/kernel/sched/topology.c
>>> +++ b/kernel/sched/topology.c
>>> @@ -664,6 +664,8 @@ static void destroy_sched_domains(struct sched_domain *sd)
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>  DEFINE_PER_CPU(int, sd_llc_size);
>>>  DEFINE_PER_CPU(int, sd_llc_id);
>>> +DEFINE_PER_CPU(int, sd_share_id);
>>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>
>>>  [..snip..]
>>>
>>
>> We would like some time to investigate this issue and root cause
>> the reason for this regression.
> 
> One significant difference I can see for now is that Kunpeng 920 is a non-SMT machine while Zen3
> is a SMT machine. So in the select_idle_sibling() path we won't use sd_llc_shared. Since sd_share_id
> and sd_cluster are inserted between sd_llc_id and sd_llc_shared which are both used in the path on
> your test, I guess the change of the layout may affect something like the cache behaviour.
> 
> Can you also test with SMT disabled?

Following are results on 2 x 64C Zen3 machine with SMT disabled in BIOS:

Clients:      tip                tip + Patch 1 only        tip + both patches        tip + both patches (Move declaration to top of block)
    1    456.35 (0.00 pct)       455.26 (-0.23 pct)        449.19 (-1.56 pct)        444.95 (-2.49 pct)
    2    887.44 (0.00 pct)       881.23 (-0.69 pct)        854.28 (-3.73 pct)        878.32 (-1.02 pct)
    4    1693.37 (0.00 pct)      1616.95 (-4.51 pct)       1635.48 (-3.41 pct)       1631.13 (-3.67 pct)
    8    3212.89 (0.00 pct)      3033.79 (-5.57 pct)   *   3135.47 (-2.40 pct)       3234.27 (0.66 pct)
   16    6234.92 (0.00 pct)      5201.92 (-16.56 pct)  *   5530.89 (-11.29 pct)  *   5912.84 (-5.16 pct)    *
   32    12237.45 (0.00 pct)     8156.19 (-33.35 pct)  *   10959.70 (-10.44 pct) *   11810.84 (-3.48 pct)
   64    24020.17 (0.00 pct)     13164.27 (-45.19 pct) *   14578.70 (-39.30 pct) *   21266.73 (-11.46 pct)  *
  128    34633.95 (0.00 pct)     32629.42 (-5.78 pct)  *   31811.74 (-8.14 pct)  *   28707.32 (-17.11 pct)  *
  256    34310.04 (0.00 pct)     37271.34 (8.63 pct)       34086.25 (-0.65 pct)      29466.42 (-14.11 pct)  *
  512    35216.68 (0.00 pct)     36763.77 (4.39 pct)       35632.86 (1.18 pct)       31823.27 (-9.63 pct)   *

As you can see the regression still exists. even with only first patch
of the series applied on top of the tip. Moving the declarations around
to top helps some cases but we are having troubles at the saturation
point with the move.

Following is the diff for "Move declaration to top of block":

--
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index e9f3dc6dcbf4..97a3895416ab 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1750,12 +1750,12 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
 	return sd;
 }
 
+DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
+DECLARE_PER_CPU(int, sd_share_id);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
 DECLARE_PER_CPU(int, sd_llc_size);
 DECLARE_PER_CPU(int, sd_llc_id);
-DECLARE_PER_CPU(int, sd_share_id);
 DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
-DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
 DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
--

The System-map of each kernel is as follows:

- On "tip"

0000000000020518 D sd_asym_cpucapacity
0000000000020520 D sd_asym_packing
0000000000020528 D sd_numa
0000000000020530 D sd_llc_shared
0000000000020538 D sd_llc_id
000000000002053c D sd_llc_size
-------------------------------------------- 64B Cacheline Boundary
0000000000020540 D sd_llc

- On "tip + Patch 1 only" and "tip + both patches"

0000000000020518 D sd_asym_cpucapacity
0000000000020520 D sd_asym_packing
0000000000020528 D sd_numa
0000000000020530 D sd_cluster     <-----
0000000000020538 D sd_llc_shared
-------------------------------------------- 64B Cacheline Boundary
0000000000020540 D sd_share_id    <-----
0000000000020544 D sd_llc_id
0000000000020548 D sd_llc_size
0000000000020550 D sd_llc


- On "tip + both patches (Move declaration to top)"

0000000000020518 D sd_asym_cpucapacity
0000000000020520 D sd_asym_packing
0000000000020528 D sd_numa
0000000000020530 D sd_llc_shared
0000000000020538 D sd_llc_id
000000000002053c D sd_llc_size
-------------------------------------------- 64B Cacheline Boundary
0000000000020540 D sd_llc
0000000000020548 D sd_share_id    <-----
0000000000020550 D sd_cluster     <-----

> Or change the layout a bit to see if there's any difference,
> like:
> 
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>  DEFINE_PER_CPU(int, sd_llc_size);
>  DEFINE_PER_CPU(int, sd_llc_id);
>  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> +DEFINE_PER_CPU(int, sd_share_id);
> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
> 
> I need to further look into it and have some tests on a SMT machine. Would you mind to share
> the kernel config as well? I'd like to compare the config as well.

I've attached the kernel config used to build the test kernel
to this mail.

> 
> Thanks,
> Yicong

We are trying to debug the issue using perf and find an optimal
arrangement of the per cpu declarations to get the relevant data
used in the wakeup path on the same 64B cache line.

We'll keep you posted of out finding. Let me know if you need
anything else in the meantime.
--
Thanks and Regards,
Prateek

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 161263 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.19.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90400
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23400
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23400
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=121
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-testing-sched-cluster"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem

CONFIG_PREEMPT_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
CONFIG_PREEMPT_DYNAMIC=y
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_PSI=y
# CONFIG_PSI_DEFAULT_DISABLED is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RCU=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=m
# CONFIG_IKCONFIG_PROC is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
CONFIG_UCLAMP_TASK=y
CONFIG_UCLAMP_BUCKETS_COUNT=5
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_UCLAMP_TASK_GROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
CONFIG_IOSF_MBI_DEBUG=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_512GB=y
CONFIG_XEN_PV_SMP=y
CONFIG_XEN_PV_DOM0=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_PVHVM_GUEST=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_PVH=y
CONFIG_XEN_DOM0=y
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
CONFIG_PVH=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
CONFIG_ACRN_GUEST=y
# CONFIG_INTEL_TDX_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_BOOT_VESA_SUPPORT=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=m
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_PERF_EVENTS_AMD_UNCORE=y
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_X86_MEM_ENCRYPT=y
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
# CONFIG_KEXEC_SIG_FORCE is not set
CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
CONFIG_ACPI_DEBUGGER=y
CONFIG_ACPI_DEBUGGER_USER=y
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_HMAT=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
# CONFIG_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_PRMT=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=y
# CONFIG_X86_AMD_PSTATE is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_CPU_IDLE_GOV_TEO=y
CONFIG_CPU_IDLE_GOV_HALTPOLL=y
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_ISA_BUS=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32_ABI is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_WERROR=y
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
# CONFIG_KVM_XEN is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_KRETPROBE_ON_RETHOOK=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_CC_PLATFORM=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_RQ_ALLOC_TIME=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_CGROUP_IOCOST=y
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_AIX_PARTITION=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_DEFAULT_ON is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
CONFIG_SLUB_CPU_PARTIAL=y
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_DEVICE_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
# CONFIG_CMA_SYSFS is not set
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_VM_GET_PAGE_PROT=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_PTE_MARKER=y
CONFIG_PTE_MARKER_UFFD_WP=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_IPV6_ILA is not set
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_IPV6_SEG6_BPF=y
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_NETLINK_ACCT=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NETFILTER_NETLINK_OSF is not set
CONFIG_NF_CONNTRACK=y
# CONFIG_NF_LOG_SYSLOG is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_SECMARK is not set
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CONNTRACK_LABELS is not set
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_MASQUERADE=y
# CONFIG_NF_TABLES is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XTABLES_COMPAT=y

#
# Xtables combined modules
#
# CONFIG_NETFILTER_XT_MARK is not set
# CONFIG_NETFILTER_XT_CONNMARK is not set

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
CONFIG_NETFILTER_XT_NAT=m
# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ECN is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration

# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
# CONFIG_NF_SOCKET_IPV4 is not set
# CONFIG_NF_TPROXY_IPV4 is not set
# CONFIG_NF_DUP_IPV4 is not set
# CONFIG_NF_LOG_ARP is not set
# CONFIG_NF_LOG_IPV4 is not set
# CONFIG_NF_REJECT_IPV4 is not set
CONFIG_IP_NF_IPTABLES=m
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_SYNPROXY is not set
CONFIG_IP_NF_NAT=m
# CONFIG_IP_NF_TARGET_MASQUERADE is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not set
# CONFIG_IP_NF_ARPTABLES is not set
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
# CONFIG_NF_TPROXY_IPV6 is not set
# CONFIG_NF_DUP_IPV6 is not set
# CONFIG_NF_REJECT_IPV6 is not set
# CONFIG_NF_LOG_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=y
# CONFIG_NF_CONNTRACK_BRIDGE is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_BPFILTER=y
# CONFIG_BPFILTER_UMH is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_SAMPLE is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
# CONFIG_NET_ACT_MPLS is not set
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_ACT_GATE is not set
CONFIG_NET_TC_SKB_EXT=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_MPLS=y
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_MPLS_ROUTING is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
CONFIG_NET_NCSI=y
CONFIG_NCSI_OEM_CMD_GET_MAC=y
# CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
CONFIG_EISA_PCI_EISA=y
CONFIG_EISA_VIRTUAL_ROOT=y
CONFIG_EISA_NAMES=y
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
CONFIG_PCIE_PTM=y
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_PF_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#
# CONFIG_VMD is not set

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_EP=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
CONFIG_PCIE_DW_PLAT_EP=y
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
# CONFIG_PCI_EPF_TEST is not set
# CONFIG_PCI_EPF_NTB is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
# CONFIG_RAPIDIO_TSI721 is not set
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
# CONFIG_RAPIDIO_ENUM_BASIC is not set
# CONFIG_RAPIDIO_CHMAN is not set
# CONFIG_RAPIDIO_MPORT_CDEV is not set

#
# RapidIO Switch drivers
#
# CONFIG_RAPIDIO_CPS_XX is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# end of RapidIO Switch drivers

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_FW_LOADER_COMPRESS=y
CONFIG_FW_LOADER_COMPRESS_XZ=y
# CONFIG_FW_LOADER_COMPRESS_ZSTD is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_HMEM_REPORTING=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_SOFT_RESERVE=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_APPLE_PROPERTIES=y
CONFIG_RESET_ATTACK_MITIGATION=y
CONFIG_EFI_RCI2_TABLE=y
# CONFIG_EFI_DISABLE_PCI_DMA is not set
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_VERBOSE_ERRORS is not set
# CONFIG_NVME_HWMON is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
CONFIG_SRAM=y
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_XEN_SCSI_FRONTEND is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_VIRTIO is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_UNSTRIPED is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set
# CONFIG_DM_AUDIT is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_RIONET is not set
CONFIG_TUN=y
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL3 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_CX_ECAT is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
# CONFIG_CAVIUM_PTP is not set
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CIRRUS=y
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
# CONFIG_DM9051 is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
# CONFIG_FUN_ETH is not set
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
# CONFIG_IGC is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_OCTEON_EP is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
# CONFIG_SFC_SIENA is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
CONFIG_LED_TRIGGER_PHY=y
CONFIG_FIXED_PHY=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_ADIN1100_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_AT803X_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_DP83TD510_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set

#
# MDIO Multiplexers
#

#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers

CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_FILTER=y
# CONFIG_PPP_MPPE is not set
CONFIG_PPP_MULTILINK=y
# CONFIG_PPPOE is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_ATH5K_PCI=y
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
CONFIG_WAN=y
# CONFIG_HDLC is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

CONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_XEN_NETDEV_BACKEND is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
CONFIG_ISDN=y
# CONFIG_MISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_LEDS is not set
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_TWL4030 is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_JOYSTICK_PSXPAD_SPI is not set
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_88PM860X is not set
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMA140 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DA9034 is not set
# CONFIG_TOUCHSCREEN_DA9052 is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_ILITEK is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
CONFIG_TOUCHSCREEN_ELAN=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MSG2638 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_IMAGIS is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM831X is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_PCAP is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
# CONFIG_TOUCHSCREEN_ZINITIX is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_88PM860X_ONKEY is not set
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_MAX77693_HAPTIC is not set
# CONFIG_INPUT_MAX8925_ONKEY is not set
# CONFIG_INPUT_MAX8997_HAPTIC is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
# CONFIG_INPUT_TWL4030_VIBRA is not set
# CONFIG_INPUT_TWL6040_VIBRA is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_DA9052_ONKEY is not set
# CONFIG_INPUT_DA9055_ONKEY is not set
# CONFIG_INPUT_DA9063_ONKEY is not set
# CONFIG_INPUT_WM831X_ON is not set
# CONFIG_INPUT_PCAP is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
CONFIG_LDISC_AUTOLOAD=y

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
CONFIG_SERIAL_8250_PERICOM=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_KGDB_NMI=y
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_TTY_PRINTK=y
CONFIG_TTY_PRINTK_LEVEL=6
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_BA431 is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
# CONFIG_NVRAM is not set
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_UV_MMTIMER is not set
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_CHT_WC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
# CONFIG_I2C_DESIGNWARE_AMDPSP is not set
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_INTEL_PCI is not set
# CONFIG_SPI_INTEL_PLATFORM is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set

#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPI_SLAVE=y
# CONFIG_SPI_SLAVE_TIME is not set
# CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
# CONFIG_PTP_1588_CLOCK_KVM is not set
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_SX150X=y

#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_104_DIO_48E is not set
# CONFIG_GPIO_104_IDIO_16 is not set
# CONFIG_GPIO_104_IDI_48 is not set
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_GPIO_MM is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# CONFIG_GPIO_ADP5520 is not set
# CONFIG_GPIO_CRYSTAL_COVE is not set
# CONFIG_GPIO_DA9052 is not set
# CONFIG_GPIO_DA9055 is not set
CONFIG_GPIO_PALMAS=y
CONFIG_GPIO_RC5T583=y
CONFIG_GPIO_TPS6586X=y
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_TWL4030 is not set
# CONFIG_GPIO_TWL6040 is not set
# CONFIG_GPIO_WM831X is not set
# CONFIG_GPIO_WM8350 is not set
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
# end of USB GPIO expanders

#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers

# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_RESTART=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_MAX8925_POWER is not set
# CONFIG_WM831X_BACKUP is not set
# CONFIG_WM831X_POWER is not set
# CONFIG_WM8350_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_DA9030 is not set
# CONFIG_BATTERY_DA9052 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX14577 is not set
# CONFIG_CHARGER_MAX77693 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24190 is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DRIVETEMP is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_DA9052_ADC is not set
# CONFIG_SENSORS_DA9055 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_FTSTEUTATES is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SY7636A is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_WM8350 is not set
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_WMI_EC is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
CONFIG_THERMAL_STATISTICS=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_THERMAL_EMULATION=y

#
# Intel thermal drivers
#
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_X86_PKG_TEMP_THERMAL is not set
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_INTEL_HFI_THERMAL is not set
# end of Intel thermal drivers

CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_DA9063_WATCHDOG is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WM831X_WATCHDOG is not set
# CONFIG_WM8350_WATCHDOG is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_TWL4030_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_EBC_C384_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
# CONFIG_XEN_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9062 is not set
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
CONFIG_INTEL_SOC_PMIC=y
CONFIG_INTEL_SOC_PMIC_CHTWC=y
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_EZX_PCAP=y
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
CONFIG_MFD_RC5T583=y
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SIMPLE_MFD_I2C is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
CONFIG_MFD_LP8788=y
# CONFIG_MFD_TI_LMU is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
CONFIG_MFD_TPS65912_SPI=y
CONFIG_TWL4030_CORE=y
CONFIG_MFD_TWL4030_AUDIO=y
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers

CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
# CONFIG_REGULATOR_AD5398 is not set
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_REGULATOR_AS3711 is not set
# CONFIG_REGULATOR_DA903X is not set
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
# CONFIG_REGULATOR_DA9210 is not set
# CONFIG_REGULATOR_DA9211 is not set
# CONFIG_REGULATOR_FAN53555 is not set
# CONFIG_REGULATOR_GPIO is not set
# CONFIG_REGULATOR_ISL9305 is not set
# CONFIG_REGULATOR_ISL6271A is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_LP3972 is not set
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LP8788 is not set
# CONFIG_REGULATOR_LTC3589 is not set
# CONFIG_REGULATOR_LTC3676 is not set
# CONFIG_REGULATOR_MAX14577 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_MAX8893 is not set
# CONFIG_REGULATOR_MAX8925 is not set
# CONFIG_REGULATOR_MAX8952 is not set
# CONFIG_REGULATOR_MAX8997 is not set
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX20086 is not set
# CONFIG_REGULATOR_MAX77693 is not set
# CONFIG_REGULATOR_MAX77826 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PCA9450 is not set
# CONFIG_REGULATOR_PCAP is not set
# CONFIG_REGULATOR_PV88060 is not set
# CONFIG_REGULATOR_PV88080 is not set
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
# CONFIG_REGULATOR_RC5T583 is not set
# CONFIG_REGULATOR_RT4801 is not set
# CONFIG_REGULATOR_RT5190A is not set
# CONFIG_REGULATOR_RT5759 is not set
# CONFIG_REGULATOR_RT6160 is not set
# CONFIG_REGULATOR_RT6245 is not set
# CONFIG_REGULATOR_RTQ2134 is not set
# CONFIG_REGULATOR_RTMV20 is not set
# CONFIG_REGULATOR_RTQ6752 is not set
# CONFIG_REGULATOR_SLG51000 is not set
# CONFIG_REGULATOR_SY7636A is not set
# CONFIG_REGULATOR_TPS51632 is not set
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65090 is not set
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
# CONFIG_REGULATOR_TPS6586X is not set
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_TPS65912 is not set
# CONFIG_REGULATOR_TWL4030 is not set
# CONFIG_REGULATOR_WM831X is not set
# CONFIG_REGULATOR_WM8350 is not set
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_GPIO is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
# CONFIG_DRM_DEBUG_MODESET_LOCK is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_GEM_SHMEM_HELPER=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
CONFIG_DRM_MGAG200=m
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_PANEL_MIPI_DBI is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN_FRONTEND is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA903X is not set
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_AAT2870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
# CONFIG_BACKLIGHT_LP8788 is not set
# CONFIG_BACKLIGHT_PANDORA is not set
# CONFIG_BACKLIGHT_AS3711 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
CONFIG_HID_PID=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# end of USB HID Boot Protocol drivers
# end of USB HID support

#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_LED_TRIG=y
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
# CONFIG_USB_MON is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DBGCAP=y
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PLATFORM=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
# CONFIG_USB_XEN_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y

#
# Gadget/Dual-role mode requires USB Gadget support to be enabled
#
# CONFIG_USB_DWC2_PCI is not set
# CONFIG_USB_DWC2_DEBUG is not set
# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
CONFIG_USB_ROLE_SWITCH=y
# CONFIG_USB_ROLES_INTEL_XHCI is not set
CONFIG_MMC=y
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_CQHCI is not set
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_LP8788 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM831X_STATUS is not set
# CONFIG_LEDS_WM8350 is not set
# CONFIG_LEDS_DA903X is not set
# CONFIG_LEDS_DA9052 is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_ADP5520 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_MAX8997 is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_CPU=y
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I7CORE is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_SBRIDGE is not set
# CONFIG_EDAC_SKX is not set
# CONFIG_EDAC_I10NM is not set
# CONFIG_EDAC_PND2 is not set
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_88PM860X is not set
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_LP8788 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_MAX8925 is not set
# CONFIG_RTC_DRV_MAX8998 is not set
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_PALMAS is not set
# CONFIG_RTC_DRV_TPS6586X is not set
# CONFIG_RTC_DRV_TPS65910 is not set
# CONFIG_RTC_DRV_RC5T583 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_DA9052 is not set
# CONFIG_RTC_DRV_DA9055 is not set
# CONFIG_RTC_DRV_DA9063 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_WM831X is not set
# CONFIG_RTC_DRV_WM8350 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_PCAP is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options

CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_HT16K33 is not set
# CONFIG_LCD2S is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
# CONFIG_UIO is not set
CONFIG_VFIO=y
CONFIG_VFIO_IOMMU_TYPE1=y
CONFIG_VFIO_VIRQFD=y
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=y
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=y
CONFIG_VFIO_PCI_VGA=y
CONFIG_VFIO_PCI_IGD=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=y
CONFIG_VIRT_DRIVERS=y
CONFIG_VMGENID=y
# CONFIG_VBOXGUEST is not set
# CONFIG_NITRO_ENCLAVES is not set
# CONFIG_ACRN_HSM is not set
# CONFIG_EFI_SECRET is not set
CONFIG_SEV_GUEST=m
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=y
# CONFIG_VIRTIO_MEM is not set
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y
CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
# CONFIG_XEN_DEV_EVTCHN is not set
CONFIG_XEN_BACKEND=y
# CONFIG_XENFS is not set
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
CONFIG_XEN_GRANT_DMA_ALLOC=y
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PCIDEV_BACKEND is not set
# CONFIG_XEN_PVCALLS_FRONTEND is not set
# CONFIG_XEN_PVCALLS_BACKEND is not set
# CONFIG_XEN_PRIVCMD is not set
CONFIG_XEN_ACPI_PROCESSOR=y
CONFIG_XEN_MCE_LOG=y
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_HAVE_VPMU=y
CONFIG_XEN_UNPOPULATED_ALLOC=y
# CONFIG_XEN_VIRTIO is not set
# end of Xen driver support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
CONFIG_STAGING=y
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_RTS5208 is not set
# CONFIG_FB_SM750 is not set
CONFIG_STAGING_MEDIA=y
# CONFIG_LTE_GDM724X is not set
# CONFIG_FB_TFT is not set
# CONFIG_KS7010 is not set
# CONFIG_PI433 is not set
# CONFIG_FIELDBUS_DEV is not set
# CONFIG_QLGE is not set

#
# VME Device Drivers
#
# CONFIG_VME_USER is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
# CONFIG_MXM_WMI is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACER_WMI is not set
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
# CONFIG_ADV_SWBUTTON is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ASUS_WMI is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_WIRELESS_HOTKEY is not set
# CONFIG_HP_WMI is not set
# CONFIG_IBM_RTL is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_IFS is not set
# CONFIG_INTEL_SAR_INT1092 is not set
# CONFIG_INTEL_SKL_INT3472 is not set
CONFIG_INTEL_PMC_CORE=y

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
# CONFIG_INTEL_WMI_THUNDERBOLT is not set

#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control

# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_VSEC is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_MSI_WMI is not set
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_LG_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_SYSTEM76_ACPI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_SERIAL_MULTI_INSTANTIATE is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_X86_ANDROID_TABLETS is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
CONFIG_PMC_ATOM=y
CONFIG_CHROME_PLATFORMS=y
# CONFIG_CHROMEOS_ACPI is not set
# CONFIG_CHROMEOS_LAPTOP is not set
# CONFIG_CHROMEOS_PSTORE is not set
# CONFIG_CHROMEOS_TBMC is not set
# CONFIG_CROS_EC is not set
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
# CONFIG_CHROMEOS_PRIVACY_SCREEN is not set
CONFIG_MELLANOX_PLATFORM=y
# CONFIG_MLXREG_HOTPLUG is not set
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
# CONFIG_NVSW_SN2201 is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_AGGREGATOR is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_WM831X is not set
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_CLK_TWL6040 is not set
# CONFIG_COMMON_CLK_PALMAS is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not set
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_IOMMU_SVA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_SVM=y
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_IRQ_REMAP=y
# CONFIG_VIRTIO_IOMMU is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
# CONFIG_REMOTEPROC_CDEV is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
# CONFIG_EXTCON_FSA9480 is not set
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_INTEL_INT3496 is not set
# CONFIG_EXTCON_INTEL_CHT_WC is not set
# CONFIG_EXTCON_MAX14577 is not set
# CONFIG_EXTCON_MAX3355 is not set
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX77843 is not set
# CONFIG_EXTCON_MAX8997 is not set
# CONFIG_EXTCON_PALMAS is not set
# CONFIG_EXTCON_PTN5150 is not set
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
# CONFIG_EXTCON_USBC_TUSB320 is not set
CONFIG_MEMORY=y
# CONFIG_IIO is not set
# CONFIG_NTB is not set
CONFIG_VME_BUS=y

#
# VME Bridge Drivers
#
# CONFIG_VME_CA91CX42 is not set
# CONFIG_VME_TSI148 is not set
# CONFIG_VME_FAKE is not set

#
# VME Board Drivers
#
# CONFIG_VMIVME_7805 is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
CONFIG_PWM_CRC=y
# CONFIG_PWM_DWC is not set
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
CONFIG_PWM_LPSS_PLATFORM=y
# CONFIG_PWM_PCA9685 is not set
# CONFIG_PWM_TWL is not set
# CONFIG_PWM_TWL_LED is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
CONFIG_RESET_CONTROLLER=y
# CONFIG_RESET_TI_SYSCON is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
CONFIG_IDLE_INJECT=y
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
CONFIG_RAS_CEC=y
# CONFIG_RAS_CEC_DEBUG is not set
# CONFIG_USB4 is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_LIBNVDIMM=y
# CONFIG_BLK_DEV_PMEM is not set
CONFIG_ND_CLAIM=y
CONFIG_BTT=y
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
# CONFIG_DEV_DAX_HMEM is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_ZONEFS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
CONFIG_FS_VERITY=y
# CONFIG_FS_VERITY_DEBUG is not set
CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_PROC_CPU_RESCTRL=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=y
CONFIG_ECRYPT_FS_MESSAGING=y
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
CONFIG_UNICODE=y
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_TRUSTED_KEYS_TPM=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=0
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
CONFIG_SECURITY_SMACK=y
# CONFIG_SECURITY_SMACK_BRINGUP is not set
CONFIG_SECURITY_SMACK_NETFILTER=y
CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
# CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_PLATFORM_KEYRING=y
# CONFIG_INTEGRITY_MACHINE_KEYRING is not set
CONFIG_LOAD_UEFI_KEYS=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_APPRAISE_MODSIG=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_EXTRA_SMACK_XATTRS=y
CONFIG_EVM_ADD_XATTRS=y
# CONFIG_EVM_LOAD_X509 is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_APPARMOR=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,integrity,apparmor"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_CRYPTD=m
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=m

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_ESSIV is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_KDF800108_CTR=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
# CONFIG_CRYPTO_DEV_CCP_CRYPTO is not set
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
CONFIG_SECONDARY_TRUSTED_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_SYSTEM_REVOCATION_LIST=y
CONFIG_SYSTEM_REVOCATION_KEYS=""
# CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=y
CONFIG_PACKING=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_COHERENT_POOL=y
CONFIG_DMA_CMA=y
# CONFIG_DMA_PERNUMA_CMA is not set

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_6x10=y
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONT_TER16x32=y
# CONFIG_FONT_6x8 is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACK_HASH_ORDER=20
CONFIG_SBITMAP=y
# end of Library routines

CONFIG_ASN1_ENCODER=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_NONE is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_BTF is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_FRAME_POINTER=y
CONFIG_OBJTOOL=y
CONFIG_STACK_VALIDATION=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_HONOUR_BLOCKLIST=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_KGDB_LOW_LEVEL_TRAP=y
CONFIG_KGDB_KDB=y
CONFIG_KDB_DEFAULT_ENABLE=0x1
CONFIG_KDB_KEYBOARD=y
CONFIG_KDB_CONTINUE_CATASTROPHIC=0
CONFIG_ARCH_HAS_EARLY_DEBUG=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
CONFIG_PAGE_POISONING=y
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=20
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_RETHOOK=y
CONFIG_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
# CONFIG_FPROBE is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
CONFIG_MMIOTRACE=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS is not set
# CONFIG_SAMPLE_TRACE_PRINTK is not set
# CONFIG_SAMPLE_FTRACE_DIRECT is not set
# CONFIG_SAMPLE_FTRACE_DIRECT_MULTI is not set
# CONFIG_SAMPLE_TRACE_ARRAY is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_KDB is not set
# CONFIG_SAMPLE_LIVEPATCH is not set
# CONFIG_SAMPLE_CONFIGFS is not set
# CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set
# CONFIG_SAMPLE_WATCHDOG is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set

#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
# CONFIG_UNWINDER_ORC is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
CONFIG_ARCH_USE_MEMTEST=y
CONFIG_MEMTEST=y
# end of Kernel Testing and Coverage
# end of Kernel hacking

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Tim Chen]

On Fri, 2022-06-17 at 17:50 +0530, K Prateek Nayak wrote:
> 
> 
> --
> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> index e9f3dc6dcbf4..97a3895416ab 100644
> --- a/kernel/sched/sched.h
> +++ b/kernel/sched/sched.h
> @@ -1750,12 +1750,12 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>  	return sd;
>  }
>  
> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
> +DECLARE_PER_CPU(int, sd_share_id);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>  DECLARE_PER_CPU(int, sd_llc_size);
>  DECLARE_PER_CPU(int, sd_llc_id);
> -DECLARE_PER_CPU(int, sd_share_id);
>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> -DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
> --
> 
> The System-map of each kernel is as follows:
> 
> - On "tip"
> 
> 0000000000020518 D sd_asym_cpucapacity
> 0000000000020520 D sd_asym_packing
> 0000000000020528 D sd_numa
> 0000000000020530 D sd_llc_shared
> 0000000000020538 D sd_llc_id
> 000000000002053c D sd_llc_size
> -------------------------------------------- 64B Cacheline Boundary
> 0000000000020540 D sd_llc
> 
> - On "tip + Patch 1 only" and "tip + both patches"
> 
> 0000000000020518 D sd_asym_cpucapacity
> 0000000000020520 D sd_asym_packing
> 0000000000020528 D sd_numa
> 0000000000020530 D sd_cluster     <-----
> 0000000000020538 D sd_llc_shared
> -------------------------------------------- 64B Cacheline Boundary
> 0000000000020540 D sd_share_id    <-----
> 0000000000020544 D sd_llc_id
> 0000000000020548 D sd_llc_size
> 0000000000020550 D sd_llc
> 
> 
> - On "tip + both patches (Move declaration to top)"
> 
> 0000000000020518 D sd_asym_cpucapacity
> 0000000000020520 D sd_asym_packing
> 0000000000020528 D sd_numa
> 0000000000020530 D sd_llc_shared
> 0000000000020538 D sd_llc_id
> 000000000002053c D sd_llc_size
> -------------------------------------------- 64B Cacheline Boundary
> 0000000000020540 D sd_llc

Wonder if it will help to try keep sd_llc and sd_llc_size into the same
cache line.  They are both used in the wake up path. 


> 0000000000020548 D sd_share_id    <-----
> 0000000000020550 D sd_cluster     <-----
> 
> > Or change the layout a bit to see if there's any difference,
> > like:
> > 
> >  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
> >  DEFINE_PER_CPU(int, sd_llc_size);
> >  DEFINE_PER_CPU(int, sd_llc_id);
> >  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
> > +DEFINE_PER_CPU(int, sd_share_id);
> > +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
> >  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
> >  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
> > 
> > I need to further look into it and have some tests on a SMT machine. Would you mind to share
> > the kernel config as well? I'd like to compare the config as well.
> 
> I've attached the kernel config used to build the test kernel
> to this mail.
> 
> > Thanks,
> > Yicong
> 
> We are trying to debug the issue using perf and find an optimal
> arrangement of the per cpu declarations to get the relevant data
> used in the wakeup path on the same 64B cache line.

A check of perf c2c profile difference between tip and the move new declarations to
the top case could be useful.  It may give some additional clues of possibel 
false sharing issues.

Tim

> 
> We'll keep you posted of out finding. Let me know if you need
> anything else in the meantime.
> --
> Thanks and Regards,
> Prateek

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[K Prateek Nayak]

Hello Tim,

Thank you for looking into this.

On 6/17/2022 10:20 PM, Tim Chen wrote:
> On Fri, 2022-06-17 at 17:50 +0530, K Prateek Nayak wrote:
>>
>>
>> --
>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>> index e9f3dc6dcbf4..97a3895416ab 100644
>> --- a/kernel/sched/sched.h
>> +++ b/kernel/sched/sched.h
>> @@ -1750,12 +1750,12 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>  	return sd;
>>  }
>>  
>> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>> +DECLARE_PER_CPU(int, sd_share_id);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>  DECLARE_PER_CPU(int, sd_llc_size);
>>  DECLARE_PER_CPU(int, sd_llc_id);
>> -DECLARE_PER_CPU(int, sd_share_id);
>>  DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>> -DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>  DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>> --
>>
>> The System-map of each kernel is as follows:
>>
>> - On "tip"
>>
>> 0000000000020518 D sd_asym_cpucapacity
>> 0000000000020520 D sd_asym_packing
>> 0000000000020528 D sd_numa
>> 0000000000020530 D sd_llc_shared
>> 0000000000020538 D sd_llc_id
>> 000000000002053c D sd_llc_size
>> -------------------------------------------- 64B Cacheline Boundary
>> 0000000000020540 D sd_llc
>>
>> - On "tip + Patch 1 only" and "tip + both patches"
>>
>> 0000000000020518 D sd_asym_cpucapacity
>> 0000000000020520 D sd_asym_packing
>> 0000000000020528 D sd_numa
>> 0000000000020530 D sd_cluster     <-----
>> 0000000000020538 D sd_llc_shared
>> -------------------------------------------- 64B Cacheline Boundary
>> 0000000000020540 D sd_share_id    <-----
>> 0000000000020544 D sd_llc_id
>> 0000000000020548 D sd_llc_size
>> 0000000000020550 D sd_llc
>>
>>
>> - On "tip + both patches (Move declaration to top)"
>>
>> 0000000000020518 D sd_asym_cpucapacity
>> 0000000000020520 D sd_asym_packing
>> 0000000000020528 D sd_numa
>> 0000000000020530 D sd_llc_shared
>> 0000000000020538 D sd_llc_id
>> 000000000002053c D sd_llc_size
>> -------------------------------------------- 64B Cacheline Boundary
>> 0000000000020540 D sd_llc
> 
> Wonder if it will help to try keep sd_llc and sd_llc_size into the same
> cache line.  They are both used in the wake up path.

We are still evaluating keeping which set of variables on the same
cache line will provide the best results.

I would have expected the two kernel variants - "tip" and the
"tip + both patches (Move declaration to top)" - to give similar results
as their System map for all the old variables remain the same and the
addition of "sd_share_id" and "sd_cluster: fit in the gap after "sd_llc".
However, now we see a regression for higher number of client.

This probably hints that access to "sd_cluster" variable in Patch 2 and
bringing in the extra cache line could be responsible for the regression
we see with "tip + both patches (Move declaration to top)"

>
> 
>> 0000000000020548 D sd_share_id    <-----
>> 0000000000020550 D sd_cluster     <-----
>>
>>> Or change the layout a bit to see if there's any difference,
>>> like:
>>>
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>  DEFINE_PER_CPU(int, sd_llc_size);
>>>  DEFINE_PER_CPU(int, sd_llc_id);
>>>  DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>> +DEFINE_PER_CPU(int, sd_share_id);
>>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>  DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>
>>> I need to further look into it and have some tests on a SMT machine. Would you mind to share
>>> the kernel config as well? I'd like to compare the config as well.
>>
>> I've attached the kernel config used to build the test kernel
>> to this mail.
>>
>>> Thanks,
>>> Yicong
>>
>> We are trying to debug the issue using perf and find an optimal
>> arrangement of the per cpu declarations to get the relevant data
>> used in the wakeup path on the same 64B cache line.
> 
> A check of perf c2c profile difference between tip and the move new declarations to
> the top case could be useful.  It may give some additional clues of possibel 
> false sharing issues.

Thank you for the suggestion. We are currently looking at perf counter
data to see how the cache efficiency has changed between the two kernels.
We suspect that the need for the data in the other cache line too in the
wakeup path is resulting in higher cache misses in the levels closer to
the core.

I don't think it is a false sharing problem as these per CPU data are
set when the system first boots up and will only be change again during
a CPU hotplug operation. However, it might be beneficial to see the c2c
profile if perf counters don't indicate anything out of the ordinary.

> 
> Tim
> 
>>
>> We'll keep you posted of out finding. Let me know if you need
>> anything else in the meantime.
>> --
>> Thanks and Regards,
>> Prateek
> 
--
Thanks and Regards,
Prateek

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Abel Wu]

On 6/20/22 7:20 PM, K Prateek Nayak Wrote:
> Hello Tim,
> 
> Thank you for looking into this.
> 
> On 6/17/2022 10:20 PM, Tim Chen wrote:
>> On Fri, 2022-06-17 at 17:50 +0530, K Prateek Nayak wrote:
>>>
>>>
>>> --
>>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>>> index e9f3dc6dcbf4..97a3895416ab 100644
>>> --- a/kernel/sched/sched.h
>>> +++ b/kernel/sched/sched.h
>>> @@ -1750,12 +1750,12 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>>   	return sd;
>>>   }
>>>   
>>> +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>> +DECLARE_PER_CPU(int, sd_share_id);
>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>   DECLARE_PER_CPU(int, sd_llc_size);
>>>   DECLARE_PER_CPU(int, sd_llc_id);
>>> -DECLARE_PER_CPU(int, sd_share_id);
>>>   DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>> -DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>>> --
>>>
>>> The System-map of each kernel is as follows:
>>>
>>> - On "tip"
>>>
>>> 0000000000020518 D sd_asym_cpucapacity
>>> 0000000000020520 D sd_asym_packing
>>> 0000000000020528 D sd_numa
>>> 0000000000020530 D sd_llc_shared
>>> 0000000000020538 D sd_llc_id
>>> 000000000002053c D sd_llc_size
>>> -------------------------------------------- 64B Cacheline Boundary
>>> 0000000000020540 D sd_llc
>>>
>>> - On "tip + Patch 1 only" and "tip + both patches"
>>>
>>> 0000000000020518 D sd_asym_cpucapacity
>>> 0000000000020520 D sd_asym_packing
>>> 0000000000020528 D sd_numa
>>> 0000000000020530 D sd_cluster     <-----
>>> 0000000000020538 D sd_llc_shared
>>> -------------------------------------------- 64B Cacheline Boundary
>>> 0000000000020540 D sd_share_id    <-----
>>> 0000000000020544 D sd_llc_id
>>> 0000000000020548 D sd_llc_size
>>> 0000000000020550 D sd_llc
>>>
>>>
>>> - On "tip + both patches (Move declaration to top)"
>>>
>>> 0000000000020518 D sd_asym_cpucapacity
>>> 0000000000020520 D sd_asym_packing
>>> 0000000000020528 D sd_numa
>>> 0000000000020530 D sd_llc_shared
>>> 0000000000020538 D sd_llc_id
>>> 000000000002053c D sd_llc_size
>>> -------------------------------------------- 64B Cacheline Boundary
>>> 0000000000020540 D sd_llc
>>
>> Wonder if it will help to try keep sd_llc and sd_llc_size into the same
>> cache line.  They are both used in the wake up path.
> 
> We are still evaluating keeping which set of variables on the same
> cache line will provide the best results.
> 
> I would have expected the two kernel variants - "tip" and the
> "tip + both patches (Move declaration to top)" - to give similar results
> as their System map for all the old variables remain the same and the
> addition of "sd_share_id" and "sd_cluster: fit in the gap after "sd_llc".
> However, now we see a regression for higher number of client.
> 
> This probably hints that access to "sd_cluster" variable in Patch 2 and
> bringing in the extra cache line could be responsible for the regression
> we see with "tip + both patches (Move declaration to top)"
> 
>>
>>
>>> 0000000000020548 D sd_share_id    <-----
>>> 0000000000020550 D sd_cluster     <-----
>>>
>>>> Or change the layout a bit to see if there's any difference,
>>>> like:
>>>>
>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>>   DEFINE_PER_CPU(int, sd_llc_size);
>>>>   DEFINE_PER_CPU(int, sd_llc_id);
>>>>   DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>> +DEFINE_PER_CPU(int, sd_share_id);
>>>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>>
>>>> I need to further look into it and have some tests on a SMT machine. Would you mind to share
>>>> the kernel config as well? I'd like to compare the config as well.
>>>
>>> I've attached the kernel config used to build the test kernel
>>> to this mail.
>>>
>>>> Thanks,
>>>> Yicong
>>>
>>> We are trying to debug the issue using perf and find an optimal
>>> arrangement of the per cpu declarations to get the relevant data
>>> used in the wakeup path on the same 64B cache line.
>>
>> A check of perf c2c profile difference between tip and the move new declarations to
>> the top case could be useful.  It may give some additional clues of possibel
>> false sharing issues.
> 
> Thank you for the suggestion. We are currently looking at perf counter
> data to see how the cache efficiency has changed between the two kernels.
> We suspect that the need for the data in the other cache line too in the
> wakeup path is resulting in higher cache misses in the levels closer to
> the core.
> 
> I don't think it is a false sharing problem as these per CPU data are
> set when the system first boots up and will only be change again during
> a CPU hotplug operation. However, it might be beneficial to see the c2c
> profile if perf counters don't indicate anything out of the ordinary.
> 

Would it be possible if any other frequent-written variables share
same cacheline with these per-cpu data causing false sharing? What
about making all these sd_* data DEFINE_PER_CPU_READ_MOSTLY?

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[K Prateek Nayak]

Hello Abel,

Thank you for looking into this issue.

tl;dr

We have found two variables that need to be
co-located on the same cache line to restore tbench
performance.

As this issue is unrelated to the functionality of
the patch, it should not hold this patch series from
landing given the performance improvements seen on
systems with CPU clusters.

The results of our analysis are discussed in
detail below.

On 6/20/2022 7:07 PM, Abel Wu wrote:
> 
> On 6/20/22 7:20 PM, K Prateek Nayak Wrote:
>> Hello Tim,
>>
>> Thank you for looking into this.
>>
>> On 6/17/2022 10:20 PM, Tim Chen wrote:
>>> On Fri, 2022-06-17 at 17:50 +0530, K Prateek Nayak wrote:
>>>>
>>>>
>>>> -- 
>>>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>>>> index e9f3dc6dcbf4..97a3895416ab 100644
>>>> --- a/kernel/sched/sched.h
>>>> +++ b/kernel/sched/sched.h
>>>> @@ -1750,12 +1750,12 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>>>       return sd;
>>>>   }
>>>>   +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>> +DECLARE_PER_CPU(int, sd_share_id);
>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>>   DECLARE_PER_CPU(int, sd_llc_size);
>>>>   DECLARE_PER_CPU(int, sd_llc_id);
>>>> -DECLARE_PER_CPU(int, sd_share_id);
>>>>   DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>> -DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>>>> -- 
>>>>
>>>> The System-map of each kernel is as follows:
>>>>
>>>> - On "tip"
>>>>
>>>> 0000000000020518 D sd_asym_cpucapacity
>>>> 0000000000020520 D sd_asym_packing
>>>> 0000000000020528 D sd_numa
>>>> 0000000000020530 D sd_llc_shared
>>>> 0000000000020538 D sd_llc_id
>>>> 000000000002053c D sd_llc_size
>>>> -------------------------------------------- 64B Cacheline Boundary
>>>> 0000000000020540 D sd_llc
>>>>
>>>> - On "tip + Patch 1 only" and "tip + both patches"
>>>>
>>>> 0000000000020518 D sd_asym_cpucapacity
>>>> 0000000000020520 D sd_asym_packing
>>>> 0000000000020528 D sd_numa
>>>> 0000000000020530 D sd_cluster     <-----
>>>> 0000000000020538 D sd_llc_shared
>>>> -------------------------------------------- 64B Cacheline Boundary
>>>> 0000000000020540 D sd_share_id    <-----
>>>> 0000000000020544 D sd_llc_id
>>>> 0000000000020548 D sd_llc_size
>>>> 0000000000020550 D sd_llc
>>>>
>>>>
>>>> - On "tip + both patches (Move declaration to top)"
>>>>
>>>> 0000000000020518 D sd_asym_cpucapacity
>>>> 0000000000020520 D sd_asym_packing
>>>> 0000000000020528 D sd_numa
>>>> 0000000000020530 D sd_llc_shared
>>>> 0000000000020538 D sd_llc_id
>>>> 000000000002053c D sd_llc_size
>>>> -------------------------------------------- 64B Cacheline Boundary
>>>> 0000000000020540 D sd_llc
>>>
>>> Wonder if it will help to try keep sd_llc and sd_llc_size into the same
>>> cache line.  They are both used in the wake up path.
>>
>> We are still evaluating keeping which set of variables on the same
>> cache line will provide the best results.
>>
>> I would have expected the two kernel variants - "tip" and the
>> "tip + both patches (Move declaration to top)" - to give similar results
>> as their System map for all the old variables remain the same and the
>> addition of "sd_share_id" and "sd_cluster: fit in the gap after "sd_llc".
>> However, now we see a regression for higher number of client.
>>
>> This probably hints that access to "sd_cluster" variable in Patch 2 and
>> bringing in the extra cache line could be responsible for the regression
>> we see with "tip + both patches (Move declaration to top)"
>>
>>>
>>>
>>>> 0000000000020548 D sd_share_id    <-----
>>>> 0000000000020550 D sd_cluster     <-----
>>>>
>>>>> Or change the layout a bit to see if there's any difference,
>>>>> like:
>>>>>
>>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>>>   DEFINE_PER_CPU(int, sd_llc_size);
>>>>>   DEFINE_PER_CPU(int, sd_llc_id);
>>>>>   DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>>> +DEFINE_PER_CPU(int, sd_share_id);
>>>>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>>>
>>>>> I need to further look into it and have some tests on a SMT machine. Would you mind to share
>>>>> the kernel config as well? I'd like to compare the config as well.
>>>>
>>>> I've attached the kernel config used to build the test kernel
>>>> to this mail.
>>>>
>>>>> Thanks,
>>>>> Yicong
>>>>
>>>> We are trying to debug the issue using perf and find an optimal
>>>> arrangement of the per cpu declarations to get the relevant data
>>>> used in the wakeup path on the same 64B cache line.
>>>
>>> A check of perf c2c profile difference between tip and the move new declarations to
>>> the top case could be useful.  It may give some additional clues of possibel
>>> false sharing issues.
>>
>> Thank you for the suggestion. We are currently looking at perf counter
>> data to see how the cache efficiency has changed between the two kernels.
>> We suspect that the need for the data in the other cache line too in the
>> wakeup path is resulting in higher cache misses in the levels closer to
>> the core.
>>
>> I don't think it is a false sharing problem as these per CPU data are
>> set when the system first boots up and will only be change again during
>> a CPU hotplug operation. However, it might be beneficial to see the c2c
>> profile if perf counters don't indicate anything out of the ordinary.
>>
> 
> Would it be possible if any other frequent-written variables share
> same cacheline with these per-cpu data causing false sharing? 

This indeed seems to be the case. I'll leave the
detailed analysis below.

> What
> about making all these sd_* data DEFINE_PER_CPU_READ_MOSTLY?
>

Making all the sd_* variables DEFINE_PER_CPU_READ_MOSTLY or
placing all the sd_* variables on the same cache line doesn't
help the regression. In fact, it makes it worse.

Following are the results on different test kernels:
tip				- 5.19.0-rc2 tip
				  (commit: f3dd3f674555 "sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle")
cluster				- tip + both the patches of the series
Patch1				- tip + only Patch 1
align_first (Patch 1) 		- tip + only Patch 1 + all sd_* variables in same cache line
per_cpu_aigned_struct (Patch 1) - tip + only Patch 1 + all sd_* variables part of a per_cpu struct which is cacheline aligned

Clients:       tip                    cluster                 Patch1             align_first (Patch 1)       per_cpu_aigned_struct (Patch 1)
    8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3018.63 (-7.51 pct)     2993.65 (-8.27 pct)         1728.89 (-47.02 pct)
   16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    4869.26 (-18.99 pct)    4820.18 (-19.81 pct)        3840.64 (-36.10 pct)
   32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    8159.60 (-32.33 pct)    7868.82 (-34.74 pct)        7130.19 (-40.86 pct)
   64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   13161.92 (-38.08 pct)   12327.86 (-42.00 pct)       12572.70 (-40.85 pct)

Following is the system map for the kernel variant "align_first (Patch 1)":

--
00000000000204c0 d sugov_cpu
 ------------------------------------------------ 20500 (Cache Line Start)
0000000000020508 d root_cpuacct_cpuusage
0000000000020510 D cpufreq_update_util_data
 ------------------------------------------------ 20540 (Cache Line Start)
0000000000020540 D sd_asym_cpucapacity                  
0000000000020548 D sd_asym_packing                      
0000000000020550 D sd_numa                              
0000000000020558 D sd_cluster                           
0000000000020560 D sd_llc_shared                        
0000000000020568 D sd_share_id                          
000000000002056c D sd_llc_id                            
0000000000020570 D sd_llc_size                          
0000000000020578 D sd_llc                               
 ------------------------------------------------ 20580 (Cache Line Start)
0000000000020580 d wake_up_klogd_work
00000000000205a0 d printk_pending
00000000000205a4 d printk_count_nmi
00000000000205a5 d printk_count
00000000000205a8 d printk_context
 ------------------------------------------------ 205c0 (Cache Line Start)
00000000000205c0 d rcu_tasks_trace__percpu
--

At this point it was clear that one or more sd_* variable needs
to be co-located with the per CPU variables in cache line starting
at 20540. We began moving variable out of the cache line one by one
to see which variable makes the difference as we found out that as
long as root_cpuacct_cpuusage and sd_llc_id are on the same cache
line, the results were equivalent of what we saw on the tip. As both
the variables seem to be accesses very frequently, access to one will
prime the cache line containing the other variable as well leading to
better cache efficiency.

Placing root_cpuacct_cpuusage, sd_llc_id, sd_share_id, sd_llc_shared
and sd_cluster on the same cache line, the results are as follows:

Kernel versions:
tip					- 5.19.0-rc2 tip
cluster					- tip + both the patches of the series
cluster (Custom Layout)			- tip + both the patches of the series + reworked system map
cluster (Custom Layout) + SIS_UTIL	- cluster (Custom Layout) + v4 of SIS_UTIL patchset by Chenyu
					  (https://lore.kernel.org/lkml/20220612163428.849378-1-yu.c.chen@intel.com/)

Clients:      tip                     cluster          cluster (Custom Layout)       cluster (Custom Layout)
                                                                                            + SIS Util
    1    444.41 (0.00 pct)       439.27 (-1.15 pct)      438.06 (-1.42 pct)             447.75 (0.75 pct)
    2    879.23 (0.00 pct)       831.49 (-5.42 pct)      846.98 (-3.66 pct)             871.64 (-0.86 pct)
    4    1648.83 (0.00 pct)      1608.07 (-2.47 pct)     1621.38 (-1.66 pct)            1656.34 (0.45 pct)
    8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3103.40 (-4.91 pct)     *      3227.88 (-1.10 pct)
   16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    5838.04 (-2.88 pct)            6232.92 (3.68 pct)
   32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    11577.73 (-3.98 pct)           11774.10 (-2.35 pct)
   64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   19563.57 (-7.97 pct)    *      22044.93 (3.70 pct)
  128    30795.27 (0.00 pct)     30861.34 (0.21 pct)     31705.47 (2.95 pct)            28986.14 (-5.87 pct)    *
  256    25138.43 (0.00 pct)     24711.90 (-1.69 pct)    23929.42 (-4.80 pct)    *      43984.52 (74.96 pct)    [Known to be unstable without SIS_UTIL]
  512    51287.93 (0.00 pct)     51855.55 (1.10 pct)     52278.33 (1.93 pct)            51511.51 (0.43 pct)
 1024    53176.97 (0.00 pct)     52554.55 (-1.17 pct)    52995.27 (-0.34 pct)           52807.04 (-0.69 pct)

Chenyu's SIS_UTIL patch was merged today in the tip
(commit: 70fb5ccf2ebb "sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg")
and seems to bring back performance to the same level
as seen on the tip used during our testing.

The system map of the tested configuration labelled "Custom Layout"
is as follows:

--
00000000000204c0 d sugov_cpu
 ------------------------------------------------ 20500 (Cache Line Start)
0000000000020508 d root_cpuacct_cpuusage
0000000000020510 D cpufreq_update_util_data
0000000000020518 D sd_llc_id
000000000002051c D sd_share_id
0000000000020520 D sd_llc_shared
0000000000020528 D sd_cluster
0000000000020530 D sd_asym_cpucapacity
0000000000020538 D sd_asym_packing
 ------------------------------------------------ 20540 (Cache Line Start)
0000000000020540 D sd_numa
0000000000020548 D sd_llc_size
0000000000020550 D sd_llc
0000000000020560 d wake_up_klogd_work
 ------------------------------------------------ 20580 (Cache Line Start)
0000000000020580 d printk_pending
0000000000020584 d printk_count_nmi
0000000000020585 d printk_count
0000000000020588 d printk_context
 ------------------------------------------------ 205c0 (Cache Line Start)
00000000000205c0 d rcu_tasks_trace__percpu
--

The System-map is however dependent on multiple factors
such as config options enabled, etc. which can change from
build to build.
Finding a permanent solution to the issue might take
some more time.

Meanwhile, as this is an issue unrelated to the
functionality of this patch, it should not block
the landing of this patch series.
Thank you everyone for your pointers and patience
during this debug.

Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
--
Thanks and Regards,
Prateek

Re: [PATCH v4 1/2] sched: Add per_cpu cluster domain info and cpus_share_resources API

[Yicong Yang]

On 2022/6/28 19:55, K Prateek Nayak wrote:
> Hello Abel,
> 
> Thank you for looking into this issue.
> 
> tl;dr
> 
> We have found two variables that need to be
> co-located on the same cache line to restore tbench
> performance.
> 
> As this issue is unrelated to the functionality of
> the patch, it should not hold this patch series from
> landing given the performance improvements seen on
> systems with CPU clusters.
> 
> The results of our analysis are discussed in
> detail below.
> 
> On 6/20/2022 7:07 PM, Abel Wu wrote:
>>
>> On 6/20/22 7:20 PM, K Prateek Nayak Wrote:
>>> Hello Tim,
>>>
>>> Thank you for looking into this.
>>>
>>> On 6/17/2022 10:20 PM, Tim Chen wrote:
>>>> On Fri, 2022-06-17 at 17:50 +0530, K Prateek Nayak wrote:
>>>>>
>>>>>
>>>>> -- 
>>>>> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
>>>>> index e9f3dc6dcbf4..97a3895416ab 100644
>>>>> --- a/kernel/sched/sched.h
>>>>> +++ b/kernel/sched/sched.h
>>>>> @@ -1750,12 +1750,12 @@ static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
>>>>>       return sd;
>>>>>   }
>>>>>   +DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>>> +DECLARE_PER_CPU(int, sd_share_id);
>>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>>>   DECLARE_PER_CPU(int, sd_llc_size);
>>>>>   DECLARE_PER_CPU(int, sd_llc_id);
>>>>> -DECLARE_PER_CPU(int, sd_share_id);
>>>>>   DECLARE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>>> -DECLARE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>>>   DECLARE_PER_CPU(struct sched_domain __rcu *, sd_asym_cpucapacity);
>>>>> -- 
>>>>>
>>>>> The System-map of each kernel is as follows:
>>>>>
>>>>> - On "tip"
>>>>>
>>>>> 0000000000020518 D sd_asym_cpucapacity
>>>>> 0000000000020520 D sd_asym_packing
>>>>> 0000000000020528 D sd_numa
>>>>> 0000000000020530 D sd_llc_shared
>>>>> 0000000000020538 D sd_llc_id
>>>>> 000000000002053c D sd_llc_size
>>>>> -------------------------------------------- 64B Cacheline Boundary
>>>>> 0000000000020540 D sd_llc
>>>>>
>>>>> - On "tip + Patch 1 only" and "tip + both patches"
>>>>>
>>>>> 0000000000020518 D sd_asym_cpucapacity
>>>>> 0000000000020520 D sd_asym_packing
>>>>> 0000000000020528 D sd_numa
>>>>> 0000000000020530 D sd_cluster     <-----
>>>>> 0000000000020538 D sd_llc_shared
>>>>> -------------------------------------------- 64B Cacheline Boundary
>>>>> 0000000000020540 D sd_share_id    <-----
>>>>> 0000000000020544 D sd_llc_id
>>>>> 0000000000020548 D sd_llc_size
>>>>> 0000000000020550 D sd_llc
>>>>>
>>>>>
>>>>> - On "tip + both patches (Move declaration to top)"
>>>>>
>>>>> 0000000000020518 D sd_asym_cpucapacity
>>>>> 0000000000020520 D sd_asym_packing
>>>>> 0000000000020528 D sd_numa
>>>>> 0000000000020530 D sd_llc_shared
>>>>> 0000000000020538 D sd_llc_id
>>>>> 000000000002053c D sd_llc_size
>>>>> -------------------------------------------- 64B Cacheline Boundary
>>>>> 0000000000020540 D sd_llc
>>>>
>>>> Wonder if it will help to try keep sd_llc and sd_llc_size into the same
>>>> cache line.  They are both used in the wake up path.
>>>
>>> We are still evaluating keeping which set of variables on the same
>>> cache line will provide the best results.
>>>
>>> I would have expected the two kernel variants - "tip" and the
>>> "tip + both patches (Move declaration to top)" - to give similar results
>>> as their System map for all the old variables remain the same and the
>>> addition of "sd_share_id" and "sd_cluster: fit in the gap after "sd_llc".
>>> However, now we see a regression for higher number of client.
>>>
>>> This probably hints that access to "sd_cluster" variable in Patch 2 and
>>> bringing in the extra cache line could be responsible for the regression
>>> we see with "tip + both patches (Move declaration to top)"
>>>
>>>>
>>>>
>>>>> 0000000000020548 D sd_share_id    <-----
>>>>> 0000000000020550 D sd_cluster     <-----
>>>>>
>>>>>> Or change the layout a bit to see if there's any difference,
>>>>>> like:
>>>>>>
>>>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_llc);
>>>>>>   DEFINE_PER_CPU(int, sd_llc_size);
>>>>>>   DEFINE_PER_CPU(int, sd_llc_id);
>>>>>>   DEFINE_PER_CPU(struct sched_domain_shared __rcu *, sd_llc_shared);
>>>>>> +DEFINE_PER_CPU(int, sd_share_id);
>>>>>> +DEFINE_PER_CPU(struct sched_domain __rcu *, sd_cluster);
>>>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_numa);
>>>>>>   DEFINE_PER_CPU(struct sched_domain __rcu *, sd_asym_packing);
>>>>>>
>>>>>> I need to further look into it and have some tests on a SMT machine. Would you mind to share
>>>>>> the kernel config as well? I'd like to compare the config as well.
>>>>>
>>>>> I've attached the kernel config used to build the test kernel
>>>>> to this mail.
>>>>>
>>>>>> Thanks,
>>>>>> Yicong
>>>>>
>>>>> We are trying to debug the issue using perf and find an optimal
>>>>> arrangement of the per cpu declarations to get the relevant data
>>>>> used in the wakeup path on the same 64B cache line.
>>>>
>>>> A check of perf c2c profile difference between tip and the move new declarations to
>>>> the top case could be useful.  It may give some additional clues of possibel
>>>> false sharing issues.
>>>
>>> Thank you for the suggestion. We are currently looking at perf counter
>>> data to see how the cache efficiency has changed between the two kernels.
>>> We suspect that the need for the data in the other cache line too in the
>>> wakeup path is resulting in higher cache misses in the levels closer to
>>> the core.
>>>
>>> I don't think it is a false sharing problem as these per CPU data are
>>> set when the system first boots up and will only be change again during
>>> a CPU hotplug operation. However, it might be beneficial to see the c2c
>>> profile if perf counters don't indicate anything out of the ordinary.
>>>
>>
>> Would it be possible if any other frequent-written variables share
>> same cacheline with these per-cpu data causing false sharing? 
> 
> This indeed seems to be the case. I'll leave the
> detailed analysis below.
> 

The percpu variables seems won't be affected by the non-percpu variables as the
percpu section is already cacheline aligned. arm64's vmlinux.ld.S shows
PERCPU_SECTION(L1_CACHE_BYTES).

>> What
>> about making all these sd_* data DEFINE_PER_CPU_READ_MOSTLY?
>>
> 
> Making all the sd_* variables DEFINE_PER_CPU_READ_MOSTLY or
> placing all the sd_* variables on the same cache line doesn't
> help the regression. In fact, it makes it worse.
> 
> Following are the results on different test kernels:
> tip				- 5.19.0-rc2 tip
> 				  (commit: f3dd3f674555 "sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle")
> cluster				- tip + both the patches of the series
> Patch1				- tip + only Patch 1
> align_first (Patch 1) 		- tip + only Patch 1 + all sd_* variables in same cache line
> per_cpu_aigned_struct (Patch 1) - tip + only Patch 1 + all sd_* variables part of a per_cpu struct which is cacheline aligned
> 
> Clients:       tip                    cluster                 Patch1             align_first (Patch 1)       per_cpu_aigned_struct (Patch 1)
>     8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3018.63 (-7.51 pct)     2993.65 (-8.27 pct)         1728.89 (-47.02 pct)
>    16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    4869.26 (-18.99 pct)    4820.18 (-19.81 pct)        3840.64 (-36.10 pct)
>    32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    8159.60 (-32.33 pct)    7868.82 (-34.74 pct)        7130.19 (-40.86 pct)
>    64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   13161.92 (-38.08 pct)   12327.86 (-42.00 pct)       12572.70 (-40.85 pct)
> 
> Following is the system map for the kernel variant "align_first (Patch 1)":
> 
> --
> 00000000000204c0 d sugov_cpu
>  ------------------------------------------------ 20500 (Cache Line Start)
> 0000000000020508 d root_cpuacct_cpuusage
> 0000000000020510 D cpufreq_update_util_data
>  ------------------------------------------------ 20540 (Cache Line Start)
> 0000000000020540 D sd_asym_cpucapacity                  
> 0000000000020548 D sd_asym_packing                      
> 0000000000020550 D sd_numa                              
> 0000000000020558 D sd_cluster                           
> 0000000000020560 D sd_llc_shared                        
> 0000000000020568 D sd_share_id                          
> 000000000002056c D sd_llc_id                            
> 0000000000020570 D sd_llc_size                          
> 0000000000020578 D sd_llc                               
>  ------------------------------------------------ 20580 (Cache Line Start)
> 0000000000020580 d wake_up_klogd_work
> 00000000000205a0 d printk_pending
> 00000000000205a4 d printk_count_nmi
> 00000000000205a5 d printk_count
> 00000000000205a8 d printk_context
>  ------------------------------------------------ 205c0 (Cache Line Start)
> 00000000000205c0 d rcu_tasks_trace__percpu
> --
> 
> At this point it was clear that one or more sd_* variable needs
> to be co-located with the per CPU variables in cache line starting
> at 20540. We began moving variable out of the cache line one by one
> to see which variable makes the difference as we found out that as
> long as root_cpuacct_cpuusage and sd_llc_id are on the same cache
> line, the results were equivalent of what we saw on the tip. As both
> the variables seem to be accesses very frequently, access to one will
> prime the cache line containing the other variable as well leading to
> better cache efficiency.
> 
> Placing root_cpuacct_cpuusage, sd_llc_id, sd_share_id, sd_llc_shared
> and sd_cluster on the same cache line, the results are as follows:
> 
> Kernel versions:
> tip					- 5.19.0-rc2 tip
> cluster					- tip + both the patches of the series
> cluster (Custom Layout)			- tip + both the patches of the series + reworked system map
> cluster (Custom Layout) + SIS_UTIL	- cluster (Custom Layout) + v4 of SIS_UTIL patchset by Chenyu
> 					  (https://lore.kernel.org/lkml/20220612163428.849378-1-yu.c.chen@intel.com/)
> 
> Clients:      tip                     cluster          cluster (Custom Layout)       cluster (Custom Layout)
>                                                                                             + SIS Util
>     1    444.41 (0.00 pct)       439.27 (-1.15 pct)      438.06 (-1.42 pct)             447.75 (0.75 pct)
>     2    879.23 (0.00 pct)       831.49 (-5.42 pct)      846.98 (-3.66 pct)             871.64 (-0.86 pct)
>     4    1648.83 (0.00 pct)      1608.07 (-2.47 pct)     1621.38 (-1.66 pct)            1656.34 (0.45 pct)
>     8    3263.81 (0.00 pct)      3086.81 (-5.42 pct)     3103.40 (-4.91 pct)     *      3227.88 (-1.10 pct)
>    16    6011.19 (0.00 pct)      5360.28 (-10.82 pct)    5838.04 (-2.88 pct)            6232.92 (3.68 pct)
>    32    12058.31 (0.00 pct)     8769.08 (-27.27 pct)    11577.73 (-3.98 pct)           11774.10 (-2.35 pct)
>    64    21258.21 (0.00 pct)     19021.09 (-10.52 pct)   19563.57 (-7.97 pct)    *      22044.93 (3.70 pct)
>   128    30795.27 (0.00 pct)     30861.34 (0.21 pct)     31705.47 (2.95 pct)            28986.14 (-5.87 pct)    *
>   256    25138.43 (0.00 pct)     24711.90 (-1.69 pct)    23929.42 (-4.80 pct)    *      43984.52 (74.96 pct)    [Known to be unstable without SIS_UTIL]
>   512    51287.93 (0.00 pct)     51855.55 (1.10 pct)     52278.33 (1.93 pct)            51511.51 (0.43 pct)
>  1024    53176.97 (0.00 pct)     52554.55 (-1.17 pct)    52995.27 (-0.34 pct)           52807.04 (-0.69 pct)
> 
> Chenyu's SIS_UTIL patch was merged today in the tip
> (commit: 70fb5ccf2ebb "sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg")
> and seems to bring back performance to the same level
> as seen on the tip used during our testing.
> 
> The system map of the tested configuration labelled "Custom Layout"
> is as follows:
> 
> --
> 00000000000204c0 d sugov_cpu
>  ------------------------------------------------ 20500 (Cache Line Start)
> 0000000000020508 d root_cpuacct_cpuusage
> 0000000000020510 D cpufreq_update_util_data
> 0000000000020518 D sd_llc_id
> 000000000002051c D sd_share_id
> 0000000000020520 D sd_llc_shared
> 0000000000020528 D sd_cluster
> 0000000000020530 D sd_asym_cpucapacity
> 0000000000020538 D sd_asym_packing
>  ------------------------------------------------ 20540 (Cache Line Start)
> 0000000000020540 D sd_numa
> 0000000000020548 D sd_llc_size
> 0000000000020550 D sd_llc
> 0000000000020560 d wake_up_klogd_work
>  ------------------------------------------------ 20580 (Cache Line Start)
> 0000000000020580 d printk_pending
> 0000000000020584 d printk_count_nmi
> 0000000000020585 d printk_count
> 0000000000020588 d printk_context
>  ------------------------------------------------ 205c0 (Cache Line Start)
> 00000000000205c0 d rcu_tasks_trace__percpu
> --
> 

Thanks for the data. It looks sufficient to illustrate the issue. I'm still a little curious that
is it specific on Zen 3? Since I cannot get the Zen 3 machine so I tried to reproduce this on the a
AMD 7742 (2 x 64C/128T) and an Intel 6148 (2 x 40C/80T) machine with your config based on tip/sche/core
of commit f3dd3f674555 "sched: Remove the limitation of WF_ON_CPU on wakelist if wakee cpu is idle".
With cluster's percpu definition patch(the worst case) the root_cpuacct_cpuusage and sd_llc_id are
separated but make little difference to the tbench.

For 7742 with NPS = 1:					
	tip/sched/core				tip/sched/core-cls-percpu				
threads	iter-1	iter-2	iter-3	avg		iter-1	iter-2	iter-3	avg	
1	287.254	285.252	288.29	286.93		288.105	285.884	286.164	286.72   (-0.075%)
2	573.623	570.326	573.67	572.54		577.242	574.257	575.611	575.70   (0.553%)
4	1140.01	1135.54	1137.9	1137.82		1153.45	1146.66	1149.8	1149.97  (1.068%)
8	2232.73	2228.71	2237.47	2232.97		2280.83	2291.94	2287.55	2286.77  (2.409%)
16	4510.65	4465.2	4522.22	4499.36		4551.19	4573.85	4575.78	4566.94  (1.502%)
32	8432.43	8542.35	8404.7	8459.83		8627.4	8712.29	8764.53	8701.41  (2.856%)
64	16404.2	16464.7	15686.4	16185.10	15878.3	15638.3	15735.6	15750.73 (-2.684%)
128	23327.6	22767.4	21017.3	22370.77	23774.9	23733.2	21744.9	23084.33 (3.190%)

layout of core-cls-percpu:
0000000000020508 d root_cpuacct_cpuusage
0000000000020510 D cpufreq_update_util_data
0000000000020518 D sd_asym_cpucapacity
0000000000020520 D sd_asym_packing
0000000000020528 D sd_numa
0000000000020530 D sd_cluster
0000000000020538 D sd_llc_shared
---------------------------------boundary
0000000000020540 D sd_share_id
0000000000020544 D sd_llc_id
0000000000020548 D sd_llc_size
0000000000020550 D sd_llc

For 6148 with SNC disabled:
         tip/sched/core       tip/sched/core-cls-percpu
1        314.44 (   0.00%)      316.68 *   0.71%*
2        630.22 (   0.00%)      633.84 *   0.57%*
4       1260.70 (   0.00%)     1267.32 *   0.52%*
8       2475.31 (   0.00%)     2485.94 *   0.43%*
16      4684.03 (   0.00%)     4682.21 *  -0.04%*
32      7496.28 (   0.00%)     7360.41 *  -1.81%*
64      7981.56 (   0.00%)     7851.73 *  -1.63%*
128    15359.81 (   0.00%)    15255.68 *  -0.68%*
256    15104.31 (   0.00%)    15253.85 *   0.99%*
320    15146.47 (   0.00%)    15151.39 *   0.03%*

layout of core-cls-percpu:
0000000000020508 d root_cpuacct_cpuusage
0000000000020510 D cpufreq_update_util_data
0000000000020518 D sd_asym_cpucapacity
0000000000020520 D sd_asym_packing
0000000000020528 D sd_numa
0000000000020530 D sd_cluster
0000000000020538 D sd_llc_shared
---------------------------------boundary
0000000000020540 D sd_share_id
0000000000020544 D sd_llc_id
0000000000020548 D sd_llc_size
0000000000020550 D sd_llc


> The System-map is however dependent on multiple factors
> such as config options enabled, etc. which can change from
> build to build.
> Finding a permanent solution to the issue might take
> some more time.
> 
> Meanwhile, as this is an issue unrelated to the
> functionality of this patch, it should not block
> the landing of this patch series.
> Thank you everyone for your pointers and patience
> during this debug.
> 
> Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>

Thanks. Then I'll respin the patch.

Regards,
Yicong

[PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Yicong Yang]

From: Barry Song <song.bao.hua@hisilicon.com>

For platforms having clusters like Kunpeng920, CPUs within the same cluster
have lower latency when synchronizing and accessing shared resources like
cache. Thus, this patch tries to find an idle cpu within the cluster of the
target CPU before scanning the whole LLC to gain lower latency.

Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
doesn't consider SMT for this moment.

Testing has been done on Kunpeng920 by pinning tasks to one numa and two
numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.

With this patch, We noticed enhancement on tbench within one numa or cross
two numa.

On numa 0:
                            5.19-rc1                patched
Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*

On numa 0-1:
                            5.19-rc1                patched
Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*

Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
---
 kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 77b2048a9326..6d173e196ad3 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
 
 #endif /* CONFIG_SCHED_SMT */
 
+#ifdef CONFIG_SCHED_CLUSTER
+/*
+ * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
+ */
+static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
+			       int target, int *nr)
+{
+	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
+	int cpu, idle_cpu;
+
+	/* TODO: Support SMT system with cluster topology */
+	if (!sched_smt_active() && sd) {
+		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
+			if (!--*nr)
+				break;
+
+			idle_cpu = __select_idle_cpu(cpu, p);
+			if ((unsigned int)idle_cpu < nr_cpumask_bits)
+				return idle_cpu;
+		}
+
+		cpumask_andnot(cpus, cpus, sched_domain_span(sd));
+	}
+
+	return -1;
+}
+#else
+static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
+			       int target, int *nr)
+{
+	return -1;
+}
+#endif
+
 /*
  * Scan the LLC domain for idle CPUs; this is dynamically regulated by
  * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
@@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
 		time = cpu_clock(this);
 	}
 
+	idle_cpu = scan_cluster(p, cpus, target, &nr);
+	if ((unsigned int)idle_cpu < nr_cpumask_bits)
+		return idle_cpu;
+
 	for_each_cpu_wrap(cpu, cpus, target + 1) {
 		if (has_idle_core) {
 			i = select_idle_core(p, cpu, cpus, &idle_cpu);
@@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
 				return i;
 
 		} else {
-			if (!--nr)
+			if (--nr <= 0)
 				return -1;
 			idle_cpu = __select_idle_cpu(cpu, p);
 			if ((unsigned int)idle_cpu < nr_cpumask_bits)
@@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
 	/*
 	 * If the previous CPU is cache affine and idle, don't be stupid:
 	 */
-	if (prev != target && cpus_share_cache(prev, target) &&
+	if (prev != target && cpus_share_resources(prev, target) &&
 	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
 	    asym_fits_capacity(task_util, prev))
 		return prev;
@@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
 	p->recent_used_cpu = prev;
 	if (recent_used_cpu != prev &&
 	    recent_used_cpu != target &&
-	    cpus_share_cache(recent_used_cpu, target) &&
+	    cpus_share_resources(recent_used_cpu, target) &&
 	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
 	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
 	    asym_fits_capacity(task_util, recent_used_cpu)) {
-- 
2.24.0

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Tim Chen]

On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
> From: Barry Song <song.bao.hua@hisilicon.com>
> 
> For platforms having clusters like Kunpeng920, CPUs within the same cluster
> have lower latency when synchronizing and accessing shared resources like
> cache. Thus, this patch tries to find an idle cpu within the cluster of the
> target CPU before scanning the whole LLC to gain lower latency.
> 
> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
> doesn't consider SMT for this moment.
> 
> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
> 
> With this patch, We noticed enhancement on tbench within one numa or cross
> two numa.
> 
> On numa 0:
>                             5.19-rc1                patched
> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
> 
> On numa 0-1:
>                             5.19-rc1                patched
> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*

Yicong,

Have you tried any workload where tasks don't share data
with each other but have sleep/wakeup?  That's the case
where we actually want to spread the tasks out among the clusters
to void contention for L2 cache.

Will be nice to make sure there's no regression there for
such workload.

Code itself looks good.

Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>

> 
> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> ---
>  kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 41 insertions(+), 3 deletions(-)
> 
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index 77b2048a9326..6d173e196ad3 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
>  
>  #endif /* CONFIG_SCHED_SMT */
>  
> +#ifdef CONFIG_SCHED_CLUSTER
> +/*
> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
> + */
> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> +			       int target, int *nr)
> +{
> +	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
> +	int cpu, idle_cpu;
> +
> +	/* TODO: Support SMT system with cluster topology */
> +	if (!sched_smt_active() && sd) {
> +		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
> +			if (!--*nr)
> +				break;
> +
> +			idle_cpu = __select_idle_cpu(cpu, p);
> +			if ((unsigned int)idle_cpu < nr_cpumask_bits)
> +				return idle_cpu;
> +		}
> +
> +		cpumask_andnot(cpus, cpus, sched_domain_span(sd));
> +	}
> +
> +	return -1;
> +}
> +#else
> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> +			       int target, int *nr)
> +{
> +	return -1;
> +}
> +#endif
> +
>  /*
>   * Scan the LLC domain for idle CPUs; this is dynamically regulated by
>   * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
> @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>  		time = cpu_clock(this);
>  	}
>  
> +	idle_cpu = scan_cluster(p, cpus, target, &nr);
> +	if ((unsigned int)idle_cpu < nr_cpumask_bits)
> +		return idle_cpu;
> +
>  	for_each_cpu_wrap(cpu, cpus, target + 1) {
>  		if (has_idle_core) {
>  			i = select_idle_core(p, cpu, cpus, &idle_cpu);
> @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>  				return i;
>  
>  		} else {
> -			if (!--nr)
> +			if (--nr <= 0)
>  				return -1;
>  			idle_cpu = __select_idle_cpu(cpu, p);
>  			if ((unsigned int)idle_cpu < nr_cpumask_bits)
> @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>  	/*
>  	 * If the previous CPU is cache affine and idle, don't be stupid:
>  	 */
> -	if (prev != target && cpus_share_cache(prev, target) &&
> +	if (prev != target && cpus_share_resources(prev, target) &&
>  	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
>  	    asym_fits_capacity(task_util, prev))
>  		return prev;
> @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>  	p->recent_used_cpu = prev;
>  	if (recent_used_cpu != prev &&
>  	    recent_used_cpu != target &&
> -	    cpus_share_cache(recent_used_cpu, target) &&
> +	    cpus_share_resources(recent_used_cpu, target) &&
>  	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
>  	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
>  	    asym_fits_capacity(task_util, recent_used_cpu)) {

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Barry Song]

On Fri, Jun 10, 2022 at 10:47 AM Tim Chen <tim.c.chen@linux.intel.com> wrote:
>
> On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
> > From: Barry Song <song.bao.hua@hisilicon.com>
> >
> > For platforms having clusters like Kunpeng920, CPUs within the same cluster
> > have lower latency when synchronizing and accessing shared resources like
> > cache. Thus, this patch tries to find an idle cpu within the cluster of the
> > target CPU before scanning the whole LLC to gain lower latency.
> >
> > Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
> > doesn't consider SMT for this moment.
> >
> > Testing has been done on Kunpeng920 by pinning tasks to one numa and two
> > numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
> >
> > With this patch, We noticed enhancement on tbench within one numa or cross
> > two numa.
> >
> > On numa 0:
> >                             5.19-rc1                patched
> > Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
> > Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
> > Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
> > Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
> > Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
> > Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
> > Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
> > Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
> >
> > On numa 0-1:
> >                             5.19-rc1                patched
> > Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
> > Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
> > Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
> > Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
> > Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
> > Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
> > Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
> > Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
> > Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
>
> Yicong,
>
> Have you tried any workload where tasks don't share data
> with each other but have sleep/wakeup?  That's the case
> where we actually want to spread the tasks out among the clusters
> to void contention for L2 cache.

guess there isn't a way to universally win in term of the modifcation of
scheduling policies. The good news is that  as long as LB is still there,
tasks still get a good chance to spread if they stop talking to each other
again and again after a small talk.

if tasks do like spreading but keep in constant touch with each other, we
may have to interfere with them from userspace by openMP, numactl or
taskset etc. as WAKE_AFFINE is always an enemy for this requirement.

>
> Will be nice to make sure there's no regression there for
> such workload.
>
> Code itself looks good.
>
> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
>
> >
> > Tested-by: Yicong Yang <yangyicong@hisilicon.com>
> > Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
> > Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> > ---
> >  kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
> >  1 file changed, 41 insertions(+), 3 deletions(-)
> >
> > diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> > index 77b2048a9326..6d173e196ad3 100644
> > --- a/kernel/sched/fair.c
> > +++ b/kernel/sched/fair.c
> > @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
> >
> >  #endif /* CONFIG_SCHED_SMT */
> >
> > +#ifdef CONFIG_SCHED_CLUSTER
> > +/*
> > + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
> > + */
> > +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> > +                            int target, int *nr)
> > +{
> > +     struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
> > +     int cpu, idle_cpu;
> > +
> > +     /* TODO: Support SMT system with cluster topology */
> > +     if (!sched_smt_active() && sd) {
> > +             for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
> > +                     if (!--*nr)
> > +                             break;
> > +
> > +                     idle_cpu = __select_idle_cpu(cpu, p);
> > +                     if ((unsigned int)idle_cpu < nr_cpumask_bits)
> > +                             return idle_cpu;
> > +             }
> > +
> > +             cpumask_andnot(cpus, cpus, sched_domain_span(sd));
> > +     }
> > +
> > +     return -1;
> > +}
> > +#else
> > +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> > +                            int target, int *nr)
> > +{
> > +     return -1;
> > +}
> > +#endif
> > +
> >  /*
> >   * Scan the LLC domain for idle CPUs; this is dynamically regulated by
> >   * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
> > @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
> >               time = cpu_clock(this);
> >       }
> >
> > +     idle_cpu = scan_cluster(p, cpus, target, &nr);
> > +     if ((unsigned int)idle_cpu < nr_cpumask_bits)
> > +             return idle_cpu;
> > +
> >       for_each_cpu_wrap(cpu, cpus, target + 1) {
> >               if (has_idle_core) {
> >                       i = select_idle_core(p, cpu, cpus, &idle_cpu);
> > @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
> >                               return i;
> >
> >               } else {
> > -                     if (!--nr)
> > +                     if (--nr <= 0)
> >                               return -1;
> >                       idle_cpu = __select_idle_cpu(cpu, p);
> >                       if ((unsigned int)idle_cpu < nr_cpumask_bits)
> > @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
> >       /*
> >        * If the previous CPU is cache affine and idle, don't be stupid:
> >        */
> > -     if (prev != target && cpus_share_cache(prev, target) &&
> > +     if (prev != target && cpus_share_resources(prev, target) &&
> >           (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
> >           asym_fits_capacity(task_util, prev))
> >               return prev;
> > @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
> >       p->recent_used_cpu = prev;
> >       if (recent_used_cpu != prev &&
> >           recent_used_cpu != target &&
> > -         cpus_share_cache(recent_used_cpu, target) &&
> > +         cpus_share_resources(recent_used_cpu, target) &&
> >           (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
> >           cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
> >           asym_fits_capacity(task_util, recent_used_cpu)) {
>

Thanks
Barry

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Yicong Yang]

On 2022/6/10 6:47, Tim Chen wrote:
> On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
>> From: Barry Song <song.bao.hua@hisilicon.com>
>>
>> For platforms having clusters like Kunpeng920, CPUs within the same cluster
>> have lower latency when synchronizing and accessing shared resources like
>> cache. Thus, this patch tries to find an idle cpu within the cluster of the
>> target CPU before scanning the whole LLC to gain lower latency.
>>
>> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
>> doesn't consider SMT for this moment.
>>
>> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
>> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
>>
>> With this patch, We noticed enhancement on tbench within one numa or cross
>> two numa.
>>
>> On numa 0:
>>                             5.19-rc1                patched
>> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
>> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
>> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
>> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
>> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
>> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
>> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
>> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
>>
>> On numa 0-1:
>>                             5.19-rc1                patched
>> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
>> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
>> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
>> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
>> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
>> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
>> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
>> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
>> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
> 
> Yicong,
> 
> Have you tried any workload where tasks don't share data
> with each other but have sleep/wakeup?  That's the case
> where we actually want to spread the tasks out among the clusters
> to void contention for L2 cache.
> 
> Will be nice to make sure there's no regression there for
> such workload.
> 

Any certain workload you'd like me test? I'm willing to do :)

I've tested this patch with MySQL as well (like in v2). This won't hurt
the MySQL case with SIS_PROP but observed some improvement with SIS_UTIL
posted in [1]. We leverage the nr to suppress redundant scanning in the
current approach and seems SIS_UTIL is more efficient in this case.

			 5.19-rc1		   patched	 patched+SIS_UTIL[1]
TPS-16threads		  6215.11	  6172.74 (-0.68%)	  6217.33 (0.04%)
QPS-16threads		124302.21	123454.68 (-0.68%)	124346.52 (0.04%)
avg-lat-16threads	     2.57	     2.59 (-0.65%)	     2.57 (0.00%)
TPS-24threads		  8726.40	  8690.87 (-0.41%)	  8833.08 (1.22%)
QPS-24threads		174527.88	173817.42 (-0.41%)	176661.54 (1.21%)
avg-lat-24threads	     2.75	     2.76 (-0.36%)	     2.71 (1.33%)
TPS-32threads		  9555.42	  9514.86 (-0.42%)	 10010.87 (4.77%)
QPS-32threads		191108.37	190297.28 (-0.42%)	200217.35 (4.55%)
avg-lat-32threads	     3.35	     3.36 (-0.30%)	     3.20 (4.58%)
TPS-64threads		 10290.10	 10324.75 (0.34%)	 10819.77 (5.15%)
QPS-64threads		205802.05	206494.95 (0.34%)	216395.40 (4.90%)
avg-lat-64threads	     6.22	     6.20 (0.38%)	     5.92 (4.88%)


> Code itself looks good.
> 
> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
> 

Thanks.

[1] https://lore.kernel.org/lkml/20220428182442.659294-1-yu.c.chen@intel.com/

>>
>> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
>> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
>> ---
>>  kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
>>  1 file changed, 41 insertions(+), 3 deletions(-)
>>
>> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
>> index 77b2048a9326..6d173e196ad3 100644
>> --- a/kernel/sched/fair.c
>> +++ b/kernel/sched/fair.c
>> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
>>  
>>  #endif /* CONFIG_SCHED_SMT */
>>  
>> +#ifdef CONFIG_SCHED_CLUSTER
>> +/*
>> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
>> + */
>> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
>> +			       int target, int *nr)
>> +{
>> +	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
>> +	int cpu, idle_cpu;
>> +
>> +	/* TODO: Support SMT system with cluster topology */
>> +	if (!sched_smt_active() && sd) {
>> +		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
>> +			if (!--*nr)
>> +				break;
>> +
>> +			idle_cpu = __select_idle_cpu(cpu, p);
>> +			if ((unsigned int)idle_cpu < nr_cpumask_bits)
>> +				return idle_cpu;
>> +		}
>> +
>> +		cpumask_andnot(cpus, cpus, sched_domain_span(sd));
>> +	}
>> +
>> +	return -1;
>> +}
>> +#else
>> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
>> +			       int target, int *nr)
>> +{
>> +	return -1;
>> +}
>> +#endif
>> +
>>  /*
>>   * Scan the LLC domain for idle CPUs; this is dynamically regulated by
>>   * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
>> @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>>  		time = cpu_clock(this);
>>  	}
>>  
>> +	idle_cpu = scan_cluster(p, cpus, target, &nr);
>> +	if ((unsigned int)idle_cpu < nr_cpumask_bits)
>> +		return idle_cpu;
>> +
>>  	for_each_cpu_wrap(cpu, cpus, target + 1) {
>>  		if (has_idle_core) {
>>  			i = select_idle_core(p, cpu, cpus, &idle_cpu);
>> @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>>  				return i;
>>  
>>  		} else {
>> -			if (!--nr)
>> +			if (--nr <= 0)
>>  				return -1;
>>  			idle_cpu = __select_idle_cpu(cpu, p);
>>  			if ((unsigned int)idle_cpu < nr_cpumask_bits)
>> @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>>  	/*
>>  	 * If the previous CPU is cache affine and idle, don't be stupid:
>>  	 */
>> -	if (prev != target && cpus_share_cache(prev, target) &&
>> +	if (prev != target && cpus_share_resources(prev, target) &&
>>  	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
>>  	    asym_fits_capacity(task_util, prev))
>>  		return prev;
>> @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>>  	p->recent_used_cpu = prev;
>>  	if (recent_used_cpu != prev &&
>>  	    recent_used_cpu != target &&
>> -	    cpus_share_cache(recent_used_cpu, target) &&
>> +	    cpus_share_resources(recent_used_cpu, target) &&
>>  	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
>>  	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
>>  	    asym_fits_capacity(task_util, recent_used_cpu)) {
> 
> 
> .
> 

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Tim Chen]

On Fri, 2022-06-10 at 14:39 +0800, Yicong Yang wrote:
> 
> 
> I've tested this patch with MySQL as well (like in v2). This won't hurt
> the MySQL case with SIS_PROP but observed some improvement with SIS_UTIL
> posted in [1]. We leverage the nr to suppress redundant scanning in the
> current approach and seems SIS_UTIL is more efficient in this case.
> 
> 			 5.19-rc1		   patched	 patched+SIS_UTIL[1]
> TPS-16threads		  6215.11	  6172.74 (-0.68%)	  6217.33 (0.04%)
> QPS-16threads		124302.21	123454.68 (-0.68%)	124346.52 (0.04%)
> avg-lat-16threads	     2.57	     2.59 (-0.65%)	     2.57 (0.00%)
> TPS-24threads		  8726.40	  8690.87 (-0.41%)	  8833.08 (1.22%)
> QPS-24threads		174527.88	173817.42 (-0.41%)	176661.54 (1.21%)
> avg-lat-24threads	     2.75	     2.76 (-0.36%)	     2.71 (1.33%)
> TPS-32threads		  9555.42	  9514.86 (-0.42%)	 10010.87 (4.77%)
> QPS-32threads		191108.37	190297.28 (-0.42%)	200217.35 (4.55%)
> avg-lat-32threads	     3.35	     3.36 (-0.30%)	     3.20 (4.58%)
> TPS-64threads		 10290.10	 10324.75 (0.34%)	 10819.77 (5.15%)
> QPS-64threads		205802.05	206494.95 (0.34%)	216395.40 (4.90%)
> avg-lat-64threads	     6.22	     6.20 (0.38%)	     5.92 (4.88%)
> 

Thanks for the numbers. SIS_UTIL will keep off migrations off the cluster
that doesn't really improve overall utilization.  We have higher chance that
L2 cache is warm.  So it makes sense that we see a bit
better performance there.

Tim

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Chen Yu]

Hi Yicong,
On Fri, Jun 10, 2022 at 02:39:38PM +0800, Yicong Yang wrote:
> On 2022/6/10 6:47, Tim Chen wrote:
> > On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
> >> From: Barry Song <song.bao.hua@hisilicon.com>
> >>
> >> For platforms having clusters like Kunpeng920, CPUs within the same cluster
> >> have lower latency when synchronizing and accessing shared resources like
> >> cache. Thus, this patch tries to find an idle cpu within the cluster of the
> >> target CPU before scanning the whole LLC to gain lower latency.
> >>
> >> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
> >> doesn't consider SMT for this moment.
> >>
> >> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
> >> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
> >>
> >> With this patch, We noticed enhancement on tbench within one numa or cross
> >> two numa.
> >>
> >> On numa 0:
> >>                             5.19-rc1                patched
> >> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
> >> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
> >> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
> >> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
> >> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
> >> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
> >> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
> >> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
> >>
> >> On numa 0-1:
> >>                             5.19-rc1                patched
> >> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
> >> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
> >> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
> >> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
> >> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
> >> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
> >> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
> >> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
> >> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
> > 
> > Yicong,
> > 
> > Have you tried any workload where tasks don't share data
> > with each other but have sleep/wakeup?  That's the case
> > where we actually want to spread the tasks out among the clusters
> > to void contention for L2 cache.
> > 
> > Will be nice to make sure there's no regression there for
> > such workload.
> > 
> 
> Any certain workload you'd like me test? I'm willing to do :)
> 
> I've tested this patch with MySQL as well (like in v2). This won't hurt
> the MySQL case with SIS_PROP but observed some improvement with SIS_UTIL
> posted in [1]. We leverage the nr to suppress redundant scanning in the
> current approach and seems SIS_UTIL is more efficient in this case.
> 
> 			 5.19-rc1		   patched	 patched+SIS_UTIL[1]
> TPS-16threads		  6215.11	  6172.74 (-0.68%)	  6217.33 (0.04%)
> QPS-16threads		124302.21	123454.68 (-0.68%)	124346.52 (0.04%)
> avg-lat-16threads	     2.57	     2.59 (-0.65%)	     2.57 (0.00%)
> TPS-24threads		  8726.40	  8690.87 (-0.41%)	  8833.08 (1.22%)
> QPS-24threads		174527.88	173817.42 (-0.41%)	176661.54 (1.21%)
> avg-lat-24threads	     2.75	     2.76 (-0.36%)	     2.71 (1.33%)
> TPS-32threads		  9555.42	  9514.86 (-0.42%)	 10010.87 (4.77%)
> QPS-32threads		191108.37	190297.28 (-0.42%)	200217.35 (4.55%)
> avg-lat-32threads	     3.35	     3.36 (-0.30%)	     3.20 (4.58%)
> TPS-64threads		 10290.10	 10324.75 (0.34%)	 10819.77 (5.15%)
> QPS-64threads		205802.05	206494.95 (0.34%)	216395.40 (4.90%)
> avg-lat-64threads	     6.22	     6.20 (0.38%)	     5.92 (4.88%)
> 
>
Thanks for the testings. I'm refining the patch according to Mel's suggestion and
will send it out later. Some minor nits below. 
> > Code itself looks good.
> > 
> > Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
> > 
> 
> Thanks.
> 
> [1] https://lore.kernel.org/lkml/20220428182442.659294-1-yu.c.chen@intel.com/
> 
> >>
> >> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
> >> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
> >> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> >> ---
> >>  kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
> >>  1 file changed, 41 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> >> index 77b2048a9326..6d173e196ad3 100644
> >> --- a/kernel/sched/fair.c
> >> +++ b/kernel/sched/fair.c
> >> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
> >>  
> >>  #endif /* CONFIG_SCHED_SMT */
> >>  
> >> +#ifdef CONFIG_SCHED_CLUSTER
> >> +/*
> >> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
> >> + */
> >> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> >> +			       int target, int *nr)
> >> +{
> >> +	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
> >> +	int cpu, idle_cpu;
> >> +
> >> +	/* TODO: Support SMT system with cluster topology */
> >> +	if (!sched_smt_active() && sd) {
> >> +		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
> >> +			if (!--*nr)
> >> +				break;
Maybe I understand it incorrectly, here we changed the value of nr. Then if
we did not find any idle CPU in the cluster, nr is set to 0. Then in the LLC scan,
since there is 'if (--nr <= 0)', the LLC scan terminates.
Is the policy like: if we can not find one idle CPU in the cluster, we give
up scan for one in the LLC?
[cut]
> >> +
> >>  /*
> >>   * Scan the LLC domain for idle CPUs; this is dynamically regulated by
If we add logic for cluster scan, might need to update the comment as well.
> >>   * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
> >> @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
> >>  		time = cpu_clock(this);
> >>  	}
> >>  
> >> +	idle_cpu = scan_cluster(p, cpus, target, &nr);
> >> +	if ((unsigned int)idle_cpu < nr_cpumask_bits)
> >> +		return idle_cpu;
> >> +
> >>  	for_each_cpu_wrap(cpu, cpus, target + 1) {
> >>  		if (has_idle_core) {
> >>  			i = select_idle_core(p, cpu, cpus, &idle_cpu);
> >> @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
> >>  				return i;
> >>  
> >>  		} else {
> >> -			if (!--nr)
> >> +			if (--nr <= 0)
May I know the reason to change this? I thought this could be a seperate patch.

thanks,
Chenyu
> >>  				return -1;
> >>  			idle_cpu = __select_idle_cpu(cpu, p);
> >>  			if ((unsigned int)idle_cpu < nr_cpumask_bits)
> >> @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
> >>  	/*
> >>  	 * If the previous CPU is cache affine and idle, don't be stupid:
> >>  	 */
> >> -	if (prev != target && cpus_share_cache(prev, target) &&
> >> +	if (prev != target && cpus_share_resources(prev, target) &&
> >>  	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
> >>  	    asym_fits_capacity(task_util, prev))
> >>  		return prev;
> >> @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
> >>  	p->recent_used_cpu = prev;
> >>  	if (recent_used_cpu != prev &&
> >>  	    recent_used_cpu != target &&
> >> -	    cpus_share_cache(recent_used_cpu, target) &&
> >> +	    cpus_share_resources(recent_used_cpu, target) &&
> >>  	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
> >>  	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
> >>  	    asym_fits_capacity(task_util, recent_used_cpu)) {
> > 
> > 
> > .
> > 

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Yicong Yang]

On 2022/6/11 11:03, Chen Yu wrote:
> Hi Yicong,
> On Fri, Jun 10, 2022 at 02:39:38PM +0800, Yicong Yang wrote:
>> On 2022/6/10 6:47, Tim Chen wrote:
>>> On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
>>>> From: Barry Song <song.bao.hua@hisilicon.com>
>>>>
>>>> For platforms having clusters like Kunpeng920, CPUs within the same cluster
>>>> have lower latency when synchronizing and accessing shared resources like
>>>> cache. Thus, this patch tries to find an idle cpu within the cluster of the
>>>> target CPU before scanning the whole LLC to gain lower latency.
>>>>
>>>> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
>>>> doesn't consider SMT for this moment.
>>>>
>>>> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
>>>> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
>>>>
>>>> With this patch, We noticed enhancement on tbench within one numa or cross
>>>> two numa.
>>>>
>>>> On numa 0:
>>>>                             5.19-rc1                patched
>>>> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
>>>> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
>>>> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
>>>> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
>>>> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
>>>> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
>>>> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
>>>> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
>>>>
>>>> On numa 0-1:
>>>>                             5.19-rc1                patched
>>>> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
>>>> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
>>>> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
>>>> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
>>>> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
>>>> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
>>>> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
>>>> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
>>>> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
>>>
>>> Yicong,
>>>
>>> Have you tried any workload where tasks don't share data
>>> with each other but have sleep/wakeup?  That's the case
>>> where we actually want to spread the tasks out among the clusters
>>> to void contention for L2 cache.
>>>
>>> Will be nice to make sure there's no regression there for
>>> such workload.
>>>
>>
>> Any certain workload you'd like me test? I'm willing to do :)
>>
>> I've tested this patch with MySQL as well (like in v2). This won't hurt
>> the MySQL case with SIS_PROP but observed some improvement with SIS_UTIL
>> posted in [1]. We leverage the nr to suppress redundant scanning in the
>> current approach and seems SIS_UTIL is more efficient in this case.
>>
>> 			 5.19-rc1		   patched	 patched+SIS_UTIL[1]
>> TPS-16threads		  6215.11	  6172.74 (-0.68%)	  6217.33 (0.04%)
>> QPS-16threads		124302.21	123454.68 (-0.68%)	124346.52 (0.04%)
>> avg-lat-16threads	     2.57	     2.59 (-0.65%)	     2.57 (0.00%)
>> TPS-24threads		  8726.40	  8690.87 (-0.41%)	  8833.08 (1.22%)
>> QPS-24threads		174527.88	173817.42 (-0.41%)	176661.54 (1.21%)
>> avg-lat-24threads	     2.75	     2.76 (-0.36%)	     2.71 (1.33%)
>> TPS-32threads		  9555.42	  9514.86 (-0.42%)	 10010.87 (4.77%)
>> QPS-32threads		191108.37	190297.28 (-0.42%)	200217.35 (4.55%)
>> avg-lat-32threads	     3.35	     3.36 (-0.30%)	     3.20 (4.58%)
>> TPS-64threads		 10290.10	 10324.75 (0.34%)	 10819.77 (5.15%)
>> QPS-64threads		205802.05	206494.95 (0.34%)	216395.40 (4.90%)
>> avg-lat-64threads	     6.22	     6.20 (0.38%)	     5.92 (4.88%)
>>
>>
> Thanks for the testings. I'm refining the patch according to Mel's suggestion and
> will send it out later. Some minor nits below. 
>>> Code itself looks good.
>>>
>>> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
>>>
>>
>> Thanks.
>>
>> [1] https://lore.kernel.org/lkml/20220428182442.659294-1-yu.c.chen@intel.com/
>>
>>>>
>>>> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
>>>> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
>>>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
>>>> ---
>>>>  kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
>>>>  1 file changed, 41 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
>>>> index 77b2048a9326..6d173e196ad3 100644
>>>> --- a/kernel/sched/fair.c
>>>> +++ b/kernel/sched/fair.c
>>>> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
>>>>  
>>>>  #endif /* CONFIG_SCHED_SMT */
>>>>  
>>>> +#ifdef CONFIG_SCHED_CLUSTER
>>>> +/*
>>>> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
>>>> + */
>>>> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
>>>> +			       int target, int *nr)
>>>> +{
>>>> +	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
>>>> +	int cpu, idle_cpu;
>>>> +
>>>> +	/* TODO: Support SMT system with cluster topology */
>>>> +	if (!sched_smt_active() && sd) {
>>>> +		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
>>>> +			if (!--*nr)
>>>> +				break;
> Maybe I understand it incorrectly, here we changed the value of nr. Then if
> we did not find any idle CPU in the cluster, nr is set to 0. Then in the LLC scan,
> since there is 'if (--nr <= 0)', the LLC scan terminates.
> Is the policy like: if we can not find one idle CPU in the cluster, we give
> up scan for one in the LLC?
> [cut]

We're still scanning in the LLC since cluster is within the LLC (on Kunpeng 920 cluster cpus
share L3 Tag and on Jacobsville cluster cpus share L2, while on both platform LLC should be
the L3 cache). So if we've run out of nr we should stop scanning the rest of LLC as well
and ...

>>>> +
>>>>  /*
>>>>   * Scan the LLC domain for idle CPUs; this is dynamically regulated by
> If we add logic for cluster scan, might need to update the comment as well.

...the comment here still stands.

>>>>   * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
>>>> @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>>>>  		time = cpu_clock(this);
>>>>  	}
>>>>  
>>>> +	idle_cpu = scan_cluster(p, cpus, target, &nr);
>>>> +	if ((unsigned int)idle_cpu < nr_cpumask_bits)
>>>> +		return idle_cpu;
>>>> +
>>>>  	for_each_cpu_wrap(cpu, cpus, target + 1) {
>>>>  		if (has_idle_core) {
>>>>  			i = select_idle_core(p, cpu, cpus, &idle_cpu);
>>>> @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>>>>  				return i;
>>>>  
>>>>  		} else {
>>>> -			if (!--nr)
>>>> +			if (--nr <= 0)
> May I know the reason to change this? I thought this could be a seperate patch.
> 

scan_cluster() may run out of nr (on Kunpeng 920 there're 4 cpus in one cluster and nr will be at least 4 with
SIS_PROP) and we cannot stop scanning correctly without this change. So the change should be in this patch.

Thanks,
Yicong

> thanks,
> Chenyu
>>>>  				return -1;
>>>>  			idle_cpu = __select_idle_cpu(cpu, p);
>>>>  			if ((unsigned int)idle_cpu < nr_cpumask_bits)
>>>> @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>>>>  	/*
>>>>  	 * If the previous CPU is cache affine and idle, don't be stupid:
>>>>  	 */
>>>> -	if (prev != target && cpus_share_cache(prev, target) &&
>>>> +	if (prev != target && cpus_share_resources(prev, target) &&
>>>>  	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
>>>>  	    asym_fits_capacity(task_util, prev))
>>>>  		return prev;
>>>> @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>>>>  	p->recent_used_cpu = prev;
>>>>  	if (recent_used_cpu != prev &&
>>>>  	    recent_used_cpu != target &&
>>>> -	    cpus_share_cache(recent_used_cpu, target) &&
>>>> +	    cpus_share_resources(recent_used_cpu, target) &&
>>>>  	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
>>>>  	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
>>>>  	    asym_fits_capacity(task_util, recent_used_cpu)) {
>>>
>>>
>>> .
>>>
> .
> 

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Chen Yu]

On Sat, Jun 11, 2022 at 03:40:23PM +0800, Yicong Yang wrote:
> On 2022/6/11 11:03, Chen Yu wrote:
> > Hi Yicong,
> > On Fri, Jun 10, 2022 at 02:39:38PM +0800, Yicong Yang wrote:
> >> On 2022/6/10 6:47, Tim Chen wrote:
> >>> On Thu, 2022-06-09 at 20:06 +0800, Yicong Yang wrote:
> >>>> From: Barry Song <song.bao.hua@hisilicon.com>
> >>>>
> >>>> For platforms having clusters like Kunpeng920, CPUs within the same cluster
> >>>> have lower latency when synchronizing and accessing shared resources like
> >>>> cache. Thus, this patch tries to find an idle cpu within the cluster of the
> >>>> target CPU before scanning the whole LLC to gain lower latency.
> >>>>
> >>>> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
> >>>> doesn't consider SMT for this moment.
> >>>>
> >>>> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
> >>>> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
> >>>>
> >>>> With this patch, We noticed enhancement on tbench within one numa or cross
> >>>> two numa.
> >>>>
> >>>> On numa 0:
> >>>>                             5.19-rc1                patched
> >>>> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
> >>>> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
> >>>> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
> >>>> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
> >>>> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
> >>>> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
> >>>> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
> >>>> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
> >>>>
> >>>> On numa 0-1:
> >>>>                             5.19-rc1                patched
> >>>> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
> >>>> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
> >>>> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
> >>>> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
> >>>> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
> >>>> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
> >>>> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
> >>>> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
> >>>> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
> >>>
> >>> Yicong,
> >>>
> >>> Have you tried any workload where tasks don't share data
> >>> with each other but have sleep/wakeup?  That's the case
> >>> where we actually want to spread the tasks out among the clusters
> >>> to void contention for L2 cache.
> >>>
> >>> Will be nice to make sure there's no regression there for
> >>> such workload.
> >>>
> >>
> >> Any certain workload you'd like me test? I'm willing to do :)
> >>
> >> I've tested this patch with MySQL as well (like in v2). This won't hurt
> >> the MySQL case with SIS_PROP but observed some improvement with SIS_UTIL
> >> posted in [1]. We leverage the nr to suppress redundant scanning in the
> >> current approach and seems SIS_UTIL is more efficient in this case.
> >>
> >> 			 5.19-rc1		   patched	 patched+SIS_UTIL[1]
> >> TPS-16threads		  6215.11	  6172.74 (-0.68%)	  6217.33 (0.04%)
> >> QPS-16threads		124302.21	123454.68 (-0.68%)	124346.52 (0.04%)
> >> avg-lat-16threads	     2.57	     2.59 (-0.65%)	     2.57 (0.00%)
> >> TPS-24threads		  8726.40	  8690.87 (-0.41%)	  8833.08 (1.22%)
> >> QPS-24threads		174527.88	173817.42 (-0.41%)	176661.54 (1.21%)
> >> avg-lat-24threads	     2.75	     2.76 (-0.36%)	     2.71 (1.33%)
> >> TPS-32threads		  9555.42	  9514.86 (-0.42%)	 10010.87 (4.77%)
> >> QPS-32threads		191108.37	190297.28 (-0.42%)	200217.35 (4.55%)
> >> avg-lat-32threads	     3.35	     3.36 (-0.30%)	     3.20 (4.58%)
> >> TPS-64threads		 10290.10	 10324.75 (0.34%)	 10819.77 (5.15%)
> >> QPS-64threads		205802.05	206494.95 (0.34%)	216395.40 (4.90%)
> >> avg-lat-64threads	     6.22	     6.20 (0.38%)	     5.92 (4.88%)
> >>
> >>
> > Thanks for the testings. I'm refining the patch according to Mel's suggestion and
> > will send it out later. Some minor nits below. 
> >>> Code itself looks good.
> >>>
> >>> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
> >>>
> >>
> >> Thanks.
> >>
> >> [1] https://lore.kernel.org/lkml/20220428182442.659294-1-yu.c.chen@intel.com/
> >>
> >>>>
> >>>> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
> >>>> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
> >>>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> >>>> ---
> >>>>  kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
> >>>>  1 file changed, 41 insertions(+), 3 deletions(-)
> >>>>
> >>>> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> >>>> index 77b2048a9326..6d173e196ad3 100644
> >>>> --- a/kernel/sched/fair.c
> >>>> +++ b/kernel/sched/fair.c
> >>>> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
> >>>>  
> >>>>  #endif /* CONFIG_SCHED_SMT */
> >>>>  
> >>>> +#ifdef CONFIG_SCHED_CLUSTER
> >>>> +/*
> >>>> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
> >>>> + */
> >>>> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> >>>> +			       int target, int *nr)
> >>>> +{
> >>>> +	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
> >>>> +	int cpu, idle_cpu;
> >>>> +
> >>>> +	/* TODO: Support SMT system with cluster topology */
> >>>> +	if (!sched_smt_active() && sd) {
> >>>> +		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
> >>>> +			if (!--*nr)
> >>>> +				break;
> > Maybe I understand it incorrectly, here we changed the value of nr. Then if
> > we did not find any idle CPU in the cluster, nr is set to 0. Then in the LLC scan,
> > since there is 'if (--nr <= 0)', the LLC scan terminates.
> > Is the policy like: if we can not find one idle CPU in the cluster, we give
> > up scan for one in the LLC?
> > [cut]
> 
> We're still scanning in the LLC since cluster is within the LLC (on Kunpeng 920 cluster cpus
> share L3 Tag and on Jacobsville cluster cpus share L2, while on both platform LLC should be
> the L3 cache). So if we've run out of nr we should stop scanning the rest of LLC as well
> and ...
>
I see, the budget has been exhausted and we don't spend more time on LLC. 
> >>>> +
> >>>>  /*
> >>>>   * Scan the LLC domain for idle CPUs; this is dynamically regulated by
> > If we add logic for cluster scan, might need to update the comment as well.
> 
> ...the comment here still stands.
> 
> >>>>   * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
> >>>> @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
> >>>>  		time = cpu_clock(this);
> >>>>  	}
> >>>>  
> >>>> +	idle_cpu = scan_cluster(p, cpus, target, &nr);
> >>>> +	if ((unsigned int)idle_cpu < nr_cpumask_bits)
> >>>> +		return idle_cpu;
> >>>> +
> >>>>  	for_each_cpu_wrap(cpu, cpus, target + 1) {
> >>>>  		if (has_idle_core) {
> >>>>  			i = select_idle_core(p, cpu, cpus, &idle_cpu);
> >>>> @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
> >>>>  				return i;
> >>>>  
> >>>>  		} else {
> >>>> -			if (!--nr)
> >>>> +			if (--nr <= 0)
> > May I know the reason to change this? I thought this could be a seperate patch.
> > 
> 
> scan_cluster() may run out of nr (on Kunpeng 920 there're 4 cpus in one cluster and nr will be at least 4 with
> SIS_PROP) and we cannot stop scanning correctly without this change. So the change should be in this patch.
> 
So when nr reaches 0, the original loop could not stop. Thanks for the explanation.

thanks,
Chenyu
> Thanks,
> Yicong
> 
> > thanks,
> > Chenyu
> >>>>  				return -1;
> >>>>  			idle_cpu = __select_idle_cpu(cpu, p);
> >>>>  			if ((unsigned int)idle_cpu < nr_cpumask_bits)
> >>>> @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
> >>>>  	/*
> >>>>  	 * If the previous CPU is cache affine and idle, don't be stupid:
> >>>>  	 */
> >>>> -	if (prev != target && cpus_share_cache(prev, target) &&
> >>>> +	if (prev != target && cpus_share_resources(prev, target) &&
> >>>>  	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
> >>>>  	    asym_fits_capacity(task_util, prev))
> >>>>  		return prev;
> >>>> @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
> >>>>  	p->recent_used_cpu = prev;
> >>>>  	if (recent_used_cpu != prev &&
> >>>>  	    recent_used_cpu != target &&
> >>>> -	    cpus_share_cache(recent_used_cpu, target) &&
> >>>> +	    cpus_share_resources(recent_used_cpu, target) &&
> >>>>  	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
> >>>>  	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
> >>>>  	    asym_fits_capacity(task_util, recent_used_cpu)) {
> >>>
> >>>
> >>> .
> >>>
> > .
> > 

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Abel Wu]

On 6/9/22 8:06 PM, Yicong Yang Wrote:
> From: Barry Song <song.bao.hua@hisilicon.com>
> 
> For platforms having clusters like Kunpeng920, CPUs within the same cluster
> have lower latency when synchronizing and accessing shared resources like
> cache. Thus, this patch tries to find an idle cpu within the cluster of the
> target CPU before scanning the whole LLC to gain lower latency.
> 
> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
> doesn't consider SMT for this moment.
> 
> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
> 
> With this patch, We noticed enhancement on tbench within one numa or cross
> two numa.
> 
> On numa 0:
>                              5.19-rc1                patched
> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
> 
> On numa 0-1:
>                              5.19-rc1                patched
> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
> 
> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
> ---
>   kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
>   1 file changed, 41 insertions(+), 3 deletions(-)
> 
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index 77b2048a9326..6d173e196ad3 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
>   
>   #endif /* CONFIG_SCHED_SMT */
>   
> +#ifdef CONFIG_SCHED_CLUSTER
> +/*
> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
> + */
> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> +			       int target, int *nr)
> +{
> +	struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
> +	int cpu, idle_cpu;
> +
> +	/* TODO: Support SMT system with cluster topology */
> +	if (!sched_smt_active() && sd) {
> +		for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
> +			if (!--*nr)
> +				break;

return -1;
:)

> +
> +			idle_cpu = __select_idle_cpu(cpu, p);
> +			if ((unsigned int)idle_cpu < nr_cpumask_bits)
> +				return idle_cpu;
> +		}
> +
> +		cpumask_andnot(cpus, cpus, sched_domain_span(sd));
> +	}
> +
> +	return -1;
> +}
> +#else
> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
> +			       int target, int *nr)
> +{
> +	return -1;
> +}
> +#endif
> +
>   /*
>    * Scan the LLC domain for idle CPUs; this is dynamically regulated by
>    * comparing the average scan cost (tracked in sd->avg_scan_cost) against the
> @@ -6375,6 +6409,10 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>   		time = cpu_clock(this);
>   	}
>   
> +	idle_cpu = scan_cluster(p, cpus, target, &nr);
> +	if ((unsigned int)idle_cpu < nr_cpumask_bits)
> +		return idle_cpu;
> +
>   	for_each_cpu_wrap(cpu, cpus, target + 1) {
>   		if (has_idle_core) {
>   			i = select_idle_core(p, cpu, cpus, &idle_cpu);
> @@ -6382,7 +6420,7 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, bool
>   				return i;
>   
>   		} else {
> -			if (!--nr)
> +			if (--nr <= 0)
>   				return -1;
>   			idle_cpu = __select_idle_cpu(cpu, p);
>   			if ((unsigned int)idle_cpu < nr_cpumask_bits)
> @@ -6481,7 +6519,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>   	/*
>   	 * If the previous CPU is cache affine and idle, don't be stupid:
>   	 */
> -	if (prev != target && cpus_share_cache(prev, target) &&
> +	if (prev != target && cpus_share_resources(prev, target) &&
>   	    (available_idle_cpu(prev) || sched_idle_cpu(prev)) &&
>   	    asym_fits_capacity(task_util, prev))
>   		return prev;
> @@ -6507,7 +6545,7 @@ static int select_idle_sibling(struct task_struct *p, int prev, int target)
>   	p->recent_used_cpu = prev;
>   	if (recent_used_cpu != prev &&
>   	    recent_used_cpu != target &&
> -	    cpus_share_cache(recent_used_cpu, target) &&
> +	    cpus_share_resources(recent_used_cpu, target) &&
>   	    (available_idle_cpu(recent_used_cpu) || sched_idle_cpu(recent_used_cpu)) &&
>   	    cpumask_test_cpu(p->recent_used_cpu, p->cpus_ptr) &&
>   	    asym_fits_capacity(task_util, recent_used_cpu)) {

Re: [PATCH v4 2/2] sched/fair: Scan cluster before scanning LLC in wake-up path

[Yicong Yang]

On 2022/6/26 20:13, Abel Wu wrote:
> 
> On 6/9/22 8:06 PM, Yicong Yang Wrote:
>> From: Barry Song <song.bao.hua@hisilicon.com>
>>
>> For platforms having clusters like Kunpeng920, CPUs within the same cluster
>> have lower latency when synchronizing and accessing shared resources like
>> cache. Thus, this patch tries to find an idle cpu within the cluster of the
>> target CPU before scanning the whole LLC to gain lower latency.
>>
>> Note neither Kunpeng920 nor x86 Jacobsville supports SMT, so this patch
>> doesn't consider SMT for this moment.
>>
>> Testing has been done on Kunpeng920 by pinning tasks to one numa and two
>> numa. On Kunpeng920, Each numa has 8 clusters and each cluster has 4 CPUs.
>>
>> With this patch, We noticed enhancement on tbench within one numa or cross
>> two numa.
>>
>> On numa 0:
>>                              5.19-rc1                patched
>> Hmean     1        350.27 (   0.00%)      406.88 *  16.16%*
>> Hmean     2        702.01 (   0.00%)      808.22 *  15.13%*
>> Hmean     4       1405.14 (   0.00%)     1614.34 *  14.89%*
>> Hmean     8       2830.53 (   0.00%)     3169.02 *  11.96%*
>> Hmean     16      5597.95 (   0.00%)     6224.20 *  11.19%*
>> Hmean     32     10537.38 (   0.00%)    10524.97 *  -0.12%*
>> Hmean     64      8366.04 (   0.00%)     8437.41 *   0.85%*
>> Hmean     128     7060.87 (   0.00%)     7150.25 *   1.27%*
>>
>> On numa 0-1:
>>                              5.19-rc1                patched
>> Hmean     1        346.11 (   0.00%)      408.47 *  18.02%*
>> Hmean     2        693.34 (   0.00%)      805.78 *  16.22%*
>> Hmean     4       1384.96 (   0.00%)     1602.49 *  15.71%*
>> Hmean     8       2699.45 (   0.00%)     3069.98 *  13.73%*
>> Hmean     16      5327.11 (   0.00%)     5688.19 *   6.78%*
>> Hmean     32     10019.10 (   0.00%)    11862.56 *  18.40%*
>> Hmean     64     13850.57 (   0.00%)    17748.54 *  28.14%*
>> Hmean     128    12498.25 (   0.00%)    15541.59 *  24.35%*
>> Hmean     256    11195.77 (   0.00%)    13854.06 *  23.74%*
>>
>> Tested-by: Yicong Yang <yangyicong@hisilicon.com>
>> Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
>> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
>> ---
>>   kernel/sched/fair.c | 44 +++++++++++++++++++++++++++++++++++++++++---
>>   1 file changed, 41 insertions(+), 3 deletions(-)
>>
>> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
>> index 77b2048a9326..6d173e196ad3 100644
>> --- a/kernel/sched/fair.c
>> +++ b/kernel/sched/fair.c
>> @@ -6327,6 +6327,40 @@ static inline int select_idle_smt(struct task_struct *p, struct sched_domain *sd
>>     #endif /* CONFIG_SCHED_SMT */
>>   +#ifdef CONFIG_SCHED_CLUSTER
>> +/*
>> + * Scan the cluster domain for idle CPUs and clear cluster cpumask after scanning
>> + */
>> +static inline int scan_cluster(struct task_struct *p, struct cpumask *cpus,
>> +                   int target, int *nr)
>> +{
>> +    struct sched_domain *sd = rcu_dereference(per_cpu(sd_cluster, target));
>> +    int cpu, idle_cpu;
>> +
>> +    /* TODO: Support SMT system with cluster topology */
>> +    if (!sched_smt_active() && sd) {
>> +        for_each_cpu_and(cpu, cpus, sched_domain_span(sd)) {
>> +            if (!--*nr)
>> +                break;
> 
> return -1;
> :)
> 

thanks for the comment. If we've run out of nr the select_idle_cpu() will stop scanning as well,
so it's unnecessary to clear the mask of cluster cpus and just return.