Re: [PATCH 1/2] bus: bt1-apb: Don't print error on -EPROBE_DEFER

[Serge Semin <fancer.lancer@gmail.com>]

On Fri, Jun 10, 2022 at 11:35:36AM +0200, Philipp Zabel wrote:
> Hi Serge,
> 
> On Fr, 2022-06-10 at 11:01 +0300, Serge Semin wrote:
> > The Baikal-T1 APB bus driver correctly handles the deferred probe
> > situation, but still pollutes the system log with a misleading error
> > message. Let's fix that by using the dev_err_probe() method to print the
> > log message in case of the clocks/resets request errors.
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > ---
> >  drivers/bus/bt1-apb.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/bus/bt1-apb.c b/drivers/bus/bt1-apb.c
> > index b25ff941e7c7..ac13b5b97107 100644
> > --- a/drivers/bus/bt1-apb.c
> > +++ b/drivers/bus/bt1-apb.c
> > @@ -176,7 +176,8 @@ static int bt1_apb_request_rst(struct bt1_apb *apb)
> >  
> > 
> > 
> > 
> >  	apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst");
> >  	if (IS_ERR(apb->prst)) {
> > -		dev_warn(apb->dev, "Couldn't get reset control line\n");
> > +		dev_err_probe(apb->dev, PTR_ERR(apb->prst),
> > +			      "Couldn't get reset control line\n");
> >  		return PTR_ERR(apb->prst);
> 

> This could be shortened to
> 
> -		dev_warn(apb->dev, "Couldn't get reset control line\n");
> +		return dev_err_probe(apb->dev, PTR_ERR(apb->prst),
> +				     "Couldn't get reset control line\n");
> -		return PTR_ERR(apb->prst);

You are absolutely right. Thanks. I'll fix it in the v2 in both
patches.

-Sergey

> 
> regards
> Philipp
>