* [PATCH v2 1/4] dt-bindings: qcom-iommu: Add Qualcomm MSM8953 compatible
2022-06-12 9:22 [PATCH v2 0/4] MDSS support for MSM8953 Luca Weiss
@ 2022-06-12 9:22 ` Luca Weiss
2022-06-16 17:48 ` Rob Herring
2022-07-06 11:45 ` Will Deacon
2022-06-12 9:22 ` [PATCH v2 2/4] arm64: dts: qcom: msm8953: add APPS IOMMU Luca Weiss
` (2 subsequent siblings)
3 siblings, 2 replies; 8+ messages in thread
From: Luca Weiss @ 2022-06-12 9:22 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss, Andy Gross,
Bjorn Andersson, Joerg Roedel, Will Deacon, Rob Herring,
Krzysztof Kozlowski, iommu, devicetree, linux-kernel
Document the compatible used for IOMMU on the msm8953 SoC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes from v1:
- new patch
Documentation/devicetree/bindings/iommu/qcom,iommu.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
index 059139abce35..e6cecfd360eb 100644
--- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
@@ -10,6 +10,7 @@ to non-secure vs secure interrupt line.
- compatible : Should be one of:
"qcom,msm8916-iommu"
+ "qcom,msm8953-iommu"
Followed by "qcom,msm-iommu-v1".
--
2.36.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 2/4] arm64: dts: qcom: msm8953: add APPS IOMMU
2022-06-12 9:22 [PATCH v2 0/4] MDSS support for MSM8953 Luca Weiss
2022-06-12 9:22 ` [PATCH v2 1/4] dt-bindings: qcom-iommu: Add Qualcomm MSM8953 compatible Luca Weiss
@ 2022-06-12 9:22 ` Luca Weiss
2022-06-12 9:22 ` [PATCH v2 3/4] drm/msm/mdp5: Add perf data for MDP v1.16 Luca Weiss
2022-06-12 9:22 ` [PATCH v2 4/4] arm64: dts: qcom: msm8953: add MDSS Luca Weiss
3 siblings, 0 replies; 8+ messages in thread
From: Luca Weiss @ 2022-06-12 9:22 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Vladimir Lypak,
Luca Weiss, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-kernel
From: Vladimir Lypak <vladimir.lypak@gmail.com>
Add the nodes describing the iommu and its context banks that are found
on msm8953 SoCs.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes from v1:
- new patch
arch/arm64/boot/dts/qcom/msm8953.dtsi | 36 +++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index ffc3ec2cd3bc..961db3e23ee4 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -726,6 +726,42 @@ tcsr_phy_clk_scheme_sel: syscon@193f044 {
reg = <0x193f044 0x4>;
};
+ apps_iommu: iommu@1e00000 {
+ compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
+ ranges = <0 0x1e20000 0x20000>;
+
+ clocks = <&gcc GCC_SMMU_CFG_CLK>,
+ <&gcc GCC_APSS_TCU_ASYNC_CLK>;
+ clock-names = "iface", "bus";
+
+ qcom,iommu-secure-id = <17>;
+
+ #address-cells = <1>;
+ #iommu-cells = <1>;
+ #size-cells = <1>;
+
+ // vfe
+ iommu-ctx@14000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x14000 0x1000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // mdp_0
+ iommu-ctx@15000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x15000 0x1000>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ // venus_ns
+ iommu-ctx@16000 {
+ compatible = "qcom,msm-iommu-v1-ns";
+ reg = <0x16000 0x1000>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x200f000 0x1000>,
--
2.36.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 3/4] drm/msm/mdp5: Add perf data for MDP v1.16
2022-06-12 9:22 [PATCH v2 0/4] MDSS support for MSM8953 Luca Weiss
2022-06-12 9:22 ` [PATCH v2 1/4] dt-bindings: qcom-iommu: Add Qualcomm MSM8953 compatible Luca Weiss
2022-06-12 9:22 ` [PATCH v2 2/4] arm64: dts: qcom: msm8953: add APPS IOMMU Luca Weiss
@ 2022-06-12 9:22 ` Luca Weiss
2022-06-12 9:22 ` [PATCH v2 4/4] arm64: dts: qcom: msm8953: add MDSS Luca Weiss
3 siblings, 0 replies; 8+ messages in thread
From: Luca Weiss @ 2022-06-12 9:22 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Vladimir Lypak,
Luca Weiss, Dmitry Baryshkov, Rob Clark, Abhinav Kumar,
Sean Paul, David Airlie, Daniel Vetter, Sireesh Kodali,
James Willcox, dri-devel, freedreno, linux-kernel
From: Vladimir Lypak <vladimir.lypak@gmail.com>
Add the perf data for the mdp found in msm8953.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes from v1:
- pick up R-b tag
drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c
index 1bf9ff5dbabc..b17f868ffca8 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cfg.c
@@ -837,6 +837,11 @@ static const struct mdp5_cfg_hw msm8x53_config = {
[2] = INTF_DSI,
},
},
+ .perf = {
+ .ab_inefficiency = 100,
+ .ib_inefficiency = 200,
+ .clk_inefficiency = 105
+ },
.max_clk = 400000000,
};
--
2.36.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v2 4/4] arm64: dts: qcom: msm8953: add MDSS
2022-06-12 9:22 [PATCH v2 0/4] MDSS support for MSM8953 Luca Weiss
` (2 preceding siblings ...)
2022-06-12 9:22 ` [PATCH v2 3/4] drm/msm/mdp5: Add perf data for MDP v1.16 Luca Weiss
@ 2022-06-12 9:22 ` Luca Weiss
2022-06-17 13:55 ` Dmitry Baryshkov
3 siblings, 1 reply; 8+ messages in thread
From: Luca Weiss @ 2022-06-12 9:22 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Vladimir Lypak,
Luca Weiss, Andy Gross, Bjorn Andersson, Rob Herring,
Krzysztof Kozlowski, devicetree, linux-kernel
From: Vladimir Lypak <vladimir.lypak@gmail.com>
Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes from v1:
- disable nodes by default, thanks Dmitry!
- enable iommu for mdp
arch/arm64/boot/dts/qcom/msm8953.dtsi | 208 ++++++++++++++++++++++++++
1 file changed, 208 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 961db3e23ee4..c7373c845f41 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -726,6 +726,214 @@ tcsr_phy_clk_scheme_sel: syscon@193f044 {
reg = <0x193f044 0x4>;
};
+ mdss: mdss@1a00000 {
+ compatible = "qcom,mdss";
+
+ reg = <0x1a00000 0x1000>,
+ <0x1ab0000 0x1040>;
+ reg-names = "mdss_phys",
+ "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ status = "disabled";
+
+ mdp: mdp@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x1a01000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ iommus = <&apps_iommu 0x15>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdp5_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi@1a94000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x1a94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ assigned-clocks = <&gcc BYTE0_CLK_SRC>,
+ <&gcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>,
+ <&dsi0_phy 1>;
+
+ clocks = <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core";
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: dsi-phy@1a94400 {
+ compatible = "qcom,dsi-phy-14nm-8953";
+ reg = <0x1a94400 0x100>,
+ <0x1a94500 0x300>,
+ <0x1a94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ dsi1: dsi@1a96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0x1a96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ assigned-clocks = <&gcc BYTE1_CLK_SRC>,
+ <&gcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>,
+ <&dsi1_phy 1>;
+
+ clocks = <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_BYTE1_CLK>,
+ <&gcc GCC_MDSS_PCLK1_CLK>,
+ <&gcc GCC_MDSS_ESC1_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core";
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&mdp5_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: dsi-phy@1a96400 {
+ compatible = "qcom,dsi-phy-14nm-8953";
+ reg = <0x1a96400 0x100>,
+ <0x1a96500 0x300>,
+ <0x1a96800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
apps_iommu: iommu@1e00000 {
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
ranges = <0 0x1e20000 0x20000>;
--
2.36.1
^ permalink raw reply related [flat|nested] 8+ messages in thread