linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configured
@ 2022-06-16 14:42 Eugen Hristev
  0 siblings, 0 replies; only message in thread
From: Eugen Hristev @ 2022-06-16 14:42 UTC (permalink / raw)
  To: linux-media; +Cc: linux-kernel, Eugen Hristev

When attempting to change the white balance (WB) ctrls before starting
streaming, e.g.:

 # v4l2-ctl -L

User Controls
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=512 flags=slider
..
 # v4l2-ctl --set-ctrl=blue_component_gain=500
 # v4l2-ctl -L
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=500 flags=slider
..

These will not be written to the internal data struct and will not be
written to the WB hardware module.
Thus, after starting streaming, they will be reset to default:

 # v4l2-ctl -L
..
            blue_component_gain 0x009819c1 (int)    : min=0 max=8191 step=1 default=512 value=512 flags=slider
..

It does not make much sense to not be able to configure the WB controls
at all times. Even if the sensor would not be RAW Bayer (and in this case the
WB module is unavailable), the user could configure the ISC itself, as the
ISC should not care about the sensor format.
Thus, when WB module is available (if the sensor changes format e.g.) it will
be already configured as be user's desires.
In consequence, remove the check in isc_s_awb_ctrl that will return if ISC
does not know the sensor format.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 drivers/media/platform/atmel/atmel-isc-base.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index afefd15c3326..72a27a5c0c1e 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -1527,10 +1527,6 @@ static int isc_s_awb_ctrl(struct v4l2_ctrl *ctrl)
 		else
 			ctrls->awb = ISC_WB_NONE;
 
-		/* we did not configure ISC yet */
-		if (!isc->config.sd_format)
-			break;
-
 		/* configure the controls with new values from v4l2 */
 		if (ctrl->cluster[ISC_CTRL_R_GAIN]->is_new)
 			ctrls->gain[ISC_HIS_CFG_MODE_R] = isc->r_gain_ctrl->val;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2022-06-16 14:43 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-16 14:42 [PATCH] media: atmel: atmel-isc-base: allow wb ctrls to be changed when isc is not configured Eugen Hristev

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).