[PATCH v2] memory: dfl-emif: Update the dfl emif driver support revision 1

* [PATCH v2] memory: dfl-emif: Update the dfl emif driver support revision 1
@ 2022-07-13 13:03 Tianfei Zhang
  2022-07-13 19:06 ` matthew.gerlach
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Tianfei Zhang @ 2022-07-13 13:03 UTC (permalink / raw)
  To: ssantosh, krzysztof.kozlowski
  Cc: trix, yilun.xu, russell.h.weight, linux-fpga, linux-kernel,
	matthew.gerlach, Debarati Biswas, Tianfei Zhang

From: Debarati Biswas <debaratix.biswas@intel.com>

The next generation (revision 1) of the DFL EMIF feature device requires
support for more than 4 memory banks. It does not support the selective
clearing of memory banks. A capability register replaces the previous
control register, and contains a bitmask to indicate the presence of each
memory bank. This bitmask aligns with the previous control register
bitmask that served the same purpose. The control and capability
registers are treated like a C Union structure in order to support both
the new and old revisions of the EMIF device.

Signed-off-by: Debarati Biswas <debaratix.biswas@intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
---
v2: no code change, just rebased to v5.19-rc6.
---
 drivers/memory/dfl-emif.c | 62 +++++++++++++++++++++++++++++++++++----
 1 file changed, 57 insertions(+), 5 deletions(-)

diff --git a/drivers/memory/dfl-emif.c b/drivers/memory/dfl-emif.c
index 3f719816771d..da06cd30a016 100644
--- a/drivers/memory/dfl-emif.c
+++ b/drivers/memory/dfl-emif.c
@@ -24,11 +24,24 @@
 #define EMIF_STAT_CLEAR_BUSY_SFT	16
 #define EMIF_CTRL			0x10
 #define EMIF_CTRL_CLEAR_EN_SFT		0
-#define EMIF_CTRL_CLEAR_EN_MSK		GENMASK_ULL(3, 0)
+#define EMIF_CTRL_CLEAR_EN_MSK		GENMASK_ULL(7, 0)
 
 #define EMIF_POLL_INVL			10000 /* us */
 #define EMIF_POLL_TIMEOUT		5000000 /* us */
 
+/*
+ * The Capability Register replaces the Control Register (at the same
+ * offset) for EMIF feature revisions > 0. The bitmask that indicates
+ * the presence of memory channels exists in both the Capability Register
+ * and Control Register definitions. These can be thought of as a C union.
+ * The Capability Register definitions are used to check for the existence
+ * of a memory channel, and the Control Register definitions are used for
+ * managing the memory-clear functionality in revision 0.
+ */
+#define EMIF_CAPABILITY_BASE		0x10
+#define EMIF_CAPABILITY_CHN_MSK_V0	GENMASK_ULL(3, 0)
+#define EMIF_CAPABILITY_CHN_MSK		GENMASK_ULL(7, 0)
+
 struct dfl_emif {
 	struct device *dev;
 	void __iomem *base;
@@ -106,16 +119,30 @@ emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 0);
 emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 1);
 emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 2);
 emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 3);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 4);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 5);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 6);
+emif_state_attr(init_done, EMIF_STAT_INIT_DONE_SFT, 7);
 
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 0);
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 1);
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 2);
 emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 3);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 4);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 5);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 6);
+emif_state_attr(cal_fail, EMIF_STAT_CALC_FAIL_SFT, 7);
+
 
 emif_clear_attr(0);
 emif_clear_attr(1);
 emif_clear_attr(2);
 emif_clear_attr(3);
+emif_clear_attr(4);
+emif_clear_attr(5);
+emif_clear_attr(6);
+emif_clear_attr(7);
+
 
 static struct attribute *dfl_emif_attrs[] = {
 	&emif_attr_inf0_init_done.attr.attr,
@@ -134,6 +161,22 @@ static struct attribute *dfl_emif_attrs[] = {
 	&emif_attr_inf3_cal_fail.attr.attr,
 	&emif_attr_inf3_clear.attr.attr,
 
+	&emif_attr_inf4_init_done.attr.attr,
+	&emif_attr_inf4_cal_fail.attr.attr,
+	&emif_attr_inf4_clear.attr.attr,
+
+	&emif_attr_inf5_init_done.attr.attr,
+	&emif_attr_inf5_cal_fail.attr.attr,
+	&emif_attr_inf5_clear.attr.attr,
+
+	&emif_attr_inf6_init_done.attr.attr,
+	&emif_attr_inf6_cal_fail.attr.attr,
+	&emif_attr_inf6_clear.attr.attr,
+
+	&emif_attr_inf7_init_done.attr.attr,
+	&emif_attr_inf7_cal_fail.attr.attr,
+	&emif_attr_inf7_clear.attr.attr,
+
 	NULL,
 };
 
@@ -143,15 +186,24 @@ static umode_t dfl_emif_visible(struct kobject *kobj,
 	struct dfl_emif *de = dev_get_drvdata(kobj_to_dev(kobj));
 	struct emif_attr *eattr = container_of(attr, struct emif_attr,
 					       attr.attr);
+	struct dfl_device *ddev = to_dfl_dev(de->dev);
 	u64 val;
 
 	/*
-	 * This device supports upto 4 memory interfaces, but not all
+	 * This device supports up to 8 memory interfaces, but not all
 	 * interfaces are used on different platforms. The read out value of
-	 * CLEAN_EN field (which is a bitmap) could tell how many interfaces
-	 * are available.
+	 * CAPABILITY_CHN_MSK field (which is a bitmap) indicates which
+	 * interfaces are available.
 	 */
-	val = FIELD_GET(EMIF_CTRL_CLEAR_EN_MSK, readq(de->base + EMIF_CTRL));
+	if (ddev->revision > 0 && strstr(attr->name, "_clear"))
+		return 0;
+
+	if (ddev->revision == 0)
+		val = FIELD_GET(EMIF_CAPABILITY_CHN_MSK_V0,
+				readq(de->base + EMIF_CAPABILITY_BASE));
+	else
+		val = FIELD_GET(EMIF_CAPABILITY_CHN_MSK,
+				readq(de->base + EMIF_CAPABILITY_BASE));
 
 	return (val & BIT_ULL(eattr->index)) ? attr->mode : 0;
 }
-- 
2.26.2


^ permalink raw reply related	[flat|nested] 4+ messages in thread