[PATCH] dt-bindings: bus: qcom,ssc-block-bus: rework arrays and drop redundant minItems

[PATCH] dt-bindings: bus: qcom,ssc-block-bus: rework arrays and drop redundant minItems

[Krzysztof Kozlowski]

There is no need to specify "minItems" if it equals to "maxItems".  On the
other hand number of items in an array can be specified via describing
items, which might bring some additional information.  This simplifies a
bit the binding.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/bus/qcom,ssc-block-bus.yaml      | 25 ++++++++-----------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
index 5b9705079015..8e9e6ff35d7d 100644
--- a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -28,11 +28,9 @@ properties:
       - const: qcom,ssc-block-bus
 
   reg:
-    description: |
-      Shall contain the addresses of the SSCAON_CONFIG0 and SSCAON_CONFIG1
-      registers
-    minItems: 2
-    maxItems: 2
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
 
   reg-names:
     items:
@@ -48,7 +46,6 @@ properties:
   ranges: true
 
   clocks:
-    minItems: 6
     maxItems: 6
 
   clock-names:
@@ -61,9 +58,9 @@ properties:
       - const: ssc_ahbs
 
   power-domains:
-    description: Power domain phandles for the ssc_cx and ssc_mx power domains
-    minItems: 2
-    maxItems: 2
+    items:
+      - description: CX power domain
+      - description: MX power domain
 
   power-domain-names:
     items:
@@ -71,11 +68,11 @@ properties:
       - const: ssc_mx
 
   resets:
-    description: |
-      Reset phandles for the ssc_reset and ssc_bcr resets (note: ssc_bcr is the
-      branch control register associated with the ssc_xo and ssc_ahbs clocks)
-    minItems: 2
-    maxItems: 2
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
 
   reset-names:
     items:
-- 
2.34.1

Re: [PATCH] dt-bindings: bus: qcom,ssc-block-bus: rework arrays and drop redundant minItems

[Rob Herring]

On Tue, 12 Jul 2022 17:46:02 +0200, Krzysztof Kozlowski wrote:
> There is no need to specify "minItems" if it equals to "maxItems".  On the
> other hand number of items in an array can be specified via describing
> items, which might bring some additional information.  This simplifies a
> bit the binding.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../bindings/bus/qcom,ssc-block-bus.yaml      | 25 ++++++++-----------
>  1 file changed, 11 insertions(+), 14 deletions(-)
> 

Applied, thanks!