From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lucas Stankus" <lucas.p.stankus@gmail.com>,
"Puranjay Mohan" <puranjay12@gmail.com>,
"Cosmin Tanislav" <cosmin.tanislav@analog.com>,
"Alexandru Tachici" <alexandru.tachici@analog.com>,
"Marcelo Schmitt" <marcelo.schmitt1@gmail.com>,
"Marcus Folkesson" <marcus.folkesson@gmail.com>,
"Kent Gustavsson" <kent@minoris.se>,
"Tomislav Denis" <tomislav.denis@avl.com>,
"Oleksij Rempel" <linux@rempel-privat.de>,
kernel@pengutronix.de,
"Antoniu Miclaus" <antoniu.miclaus@analog.com>,
"Ricardo Ribalda" <ribalda@kernel.org>,
"Dragos Bogdan" <dragos.bogdan@analog.com>,
"Jean-Baptiste Maneyrol" <jmaneyrol@invensense.com>,
"Lorenzo Bianconi" <lorenzo@kernel.org>,
"Stefan Popa" <stefan.popa@analog.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Stephan Gerhold" <stephan@gerhold.net>,
"Mike Looijmans" <mike.looijmans@topic.nl>,
"Joachim Eastwood" <manabian@gmail.com>,
"Tomas Melin" <tomas.melin@vaisala.com>,
"Sean Nyekjaer" <sean@geanix.com>,
"Beniamin Bia" <beniamin.bia@analog.com>,
"Patrick Vasseur" <patrick.vasseur@c-s.fr>,
"Charles-Antoine Couret" <charles-antoine.couret@essensium.com>,
"Vladimir Barinov" <vladimir.barinov@cogentembedded.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Philippe Reynes" <tremyfr@yahoo.fr>,
"Jacopo Mondi" <jacopo@jmondi.org>,
"Akinobu Mita" <akinobu.mita@gmail.com>,
"Alexandru Lazar" <alazar@startmail.com>,
"Oskar Andero" <oskar.andero@gmail.com>,
"Mårten Lindahl" <martenli@axis.com>,
"Bogdan Pricop" <bogdan.pricop@emutex.com>,
"Angelo Compagnucci" <angelo.compagnucci@gmail.com>,
"Matt Ranostay" <matt.ranostay@konsulko.com>,
"Dan Murphy" <dmurphy@ti.com>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Phil Reid" <preid@electromag.com.au>,
"Michael Welling" <mwelling@ieee.org>,
"Lukas Wunner" <lukas@wunner.de>,
"Robert Jones" <rjones@gateworks.com>,
"Chris Coffey" <cmc@babblebit.net>,
"Slawomir Stepien" <sst@poczta.fm>,
"Sankar Velliangiri" <navin@linumiz.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml
Date: Wed, 27 Jul 2022 18:46:36 +0200 [thread overview]
Message-ID: <20220727164646.387541-1-krzysztof.kozlowski@linaro.org> (raw)
Technically, this depends on [1] merged to SPI tree, if we want to
preserve existing behavior of not allowing SPI CPHA and CPOL in each of
schemas in this patch.
If this patch comes independently via different tree, the SPI CPHA and
CPOL will be allowed for brief period of time, before [1] is merged.
This will not have negative impact, just DT schema checks will be
loosened for that period.
[1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/
Changes since v1
================
1. Continue the rework for entire IIO.
v1: https://lore.kernel.org/all/20220715095302.214276-1-krzysztof.kozlowski@linaro.org/
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
dt-bindings: iio: adc: use spi-peripheral-props.yaml
dt-bindings: iio: accel: use spi-peripheral-props.yaml
dt-bindings: iio: amplifiers: adi,ada4250: use
spi-peripheral-props.yaml
dt-bindings: iio: dac: use spi-peripheral-props.yaml
dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml
dt-bindings: iio: health: ti,afe4403: use spi-peripheral-props.yaml
dt-bindings: iio: imu: use spi-peripheral-props.yaml
dt-bindings: iio: potentiometer: use spi-peripheral-props.yaml
dt-bindings: iio: samsung,sensorhub-rinato: use
spi-peripheral-props.yaml
dt-bindings: iio: temperature: use spi-peripheral-props.yaml
.../bindings/iio/accel/adi,adis16201.yaml | 7 ++---
.../bindings/iio/accel/adi,adis16240.yaml | 7 ++---
.../bindings/iio/accel/adi,adxl313.yaml | 9 +++----
.../bindings/iio/accel/adi,adxl345.yaml | 7 ++---
.../bindings/iio/accel/adi,adxl355.yaml | 7 ++---
.../bindings/iio/accel/adi,adxl367.yaml | 7 ++---
.../bindings/iio/accel/adi,adxl372.yaml | 7 ++---
.../bindings/iio/accel/bosch,bma220.yaml | 7 ++---
.../bindings/iio/accel/bosch,bma255.yaml | 5 +++-
.../bindings/iio/accel/bosch,bmi088.yaml | 7 ++---
.../bindings/iio/accel/fsl,mma7455.yaml | 7 ++---
.../bindings/iio/accel/kionix,kxsd9.yaml | 7 ++---
.../bindings/iio/accel/murata,sca3300.yaml | 5 +++-
.../bindings/iio/accel/nxp,fxls8962af.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7124.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7192.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7280a.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7292.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7298.yaml | 6 +++--
.../bindings/iio/adc/adi,ad7476.yaml | 8 +++---
.../bindings/iio/adc/adi,ad7606.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7768-1.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7923.yaml | 7 ++---
.../bindings/iio/adc/adi,ad7949.yaml | 7 ++---
.../bindings/iio/adc/holt,hi8435.yaml | 7 ++---
.../bindings/iio/adc/lltc,ltc2496.yaml | 8 +++---
.../bindings/iio/adc/maxim,max1027.yaml | 5 +++-
.../bindings/iio/adc/maxim,max11100.yaml | 7 +++--
.../bindings/iio/adc/maxim,max1118.yaml | 26 ++++++++++---------
.../bindings/iio/adc/maxim,max1241.yaml | 7 ++---
.../bindings/iio/adc/microchip,mcp3201.yaml | 6 +++--
.../bindings/iio/adc/microchip,mcp3911.yaml | 5 +++-
.../bindings/iio/adc/ti,adc0832.yaml | 7 ++---
.../bindings/iio/adc/ti,adc084s021.yaml | 7 ++---
.../bindings/iio/adc/ti,adc108s102.yaml | 6 +++--
.../bindings/iio/adc/ti,adc12138.yaml | 7 ++---
.../bindings/iio/adc/ti,adc128s052.yaml | 7 ++---
.../bindings/iio/adc/ti,adc161s626.yaml | 7 ++---
.../bindings/iio/adc/ti,ads124s08.yaml | 7 ++---
.../bindings/iio/adc/ti,ads131e08.yaml | 7 ++---
.../bindings/iio/adc/ti,ads8344.yaml | 7 ++---
.../bindings/iio/adc/ti,ads8688.yaml | 7 ++---
.../bindings/iio/adc/ti,tlc4541.yaml | 7 ++---
.../bindings/iio/adc/ti,tsc2046.yaml | 7 ++---
.../bindings/iio/amplifiers/adi,ada4250.yaml | 7 ++---
.../bindings/iio/dac/adi,ad5064.yaml | 7 +++--
.../bindings/iio/dac/adi,ad5360.yaml | 7 +++--
.../bindings/iio/dac/adi,ad5380.yaml | 9 ++++---
.../bindings/iio/dac/adi,ad5421.yaml | 7 ++---
.../bindings/iio/dac/adi,ad5449.yaml | 7 +++--
.../bindings/iio/dac/adi,ad5624r.yaml | 9 ++++---
.../bindings/iio/dac/adi,ad5686.yaml | 9 ++++---
.../bindings/iio/dac/adi,ad5755.yaml | 9 ++++---
.../bindings/iio/dac/adi,ad5758.yaml | 4 +--
.../bindings/iio/dac/adi,ad5761.yaml | 7 +++--
.../bindings/iio/dac/adi,ad5764.yaml | 7 +++--
.../bindings/iio/dac/adi,ad5770r.yaml | 7 ++---
.../bindings/iio/dac/adi,ad5791.yaml | 9 ++++---
.../bindings/iio/dac/adi,ad8801.yaml | 7 +++--
.../bindings/iio/dac/microchip,mcp4922.yaml | 9 ++++---
.../bindings/iio/dac/ti,dac082s085.yaml | 9 ++++---
.../bindings/iio/dac/ti,dac7311.yaml | 7 ++---
.../bindings/iio/dac/ti,dac7612.yaml | 7 ++---
.../bindings/iio/frequency/adf4371.yaml | 7 ++---
.../bindings/iio/health/ti,afe4403.yaml | 9 ++++---
.../bindings/iio/imu/adi,adis16460.yaml | 7 ++---
.../bindings/iio/imu/adi,adis16480.yaml | 9 ++++---
.../bindings/iio/imu/bosch,bmi160.yaml | 7 ++---
.../bindings/iio/imu/invensense,icm42600.yaml | 6 +++--
.../bindings/iio/imu/invensense,mpu6050.yaml | 5 ++--
.../bindings/iio/imu/nxp,fxos8700.yaml | 7 ++---
.../bindings/iio/imu/st,lsm6dsx.yaml | 9 ++++---
.../iio/potentiometer/microchip,mcp41010.yaml | 9 ++++---
.../iio/potentiometer/microchip,mcp4131.yaml | 9 ++++---
.../iio/samsung,sensorhub-rinato.yaml | 9 ++++---
.../iio/temperature/maxim,max31855k.yaml | 4 +--
.../iio/temperature/maxim,max31856.yaml | 6 +++--
.../iio/temperature/maxim,max31865.yaml | 6 +++--
78 files changed, 324 insertions(+), 249 deletions(-)
--
2.34.1
next reply other threads:[~2022-07-27 17:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-27 16:46 Krzysztof Kozlowski [this message]
2022-07-27 16:46 ` [PATCH v2 01/10] dt-bindings: iio: adc: use spi-peripheral-props.yaml Krzysztof Kozlowski
2022-07-27 16:56 ` Marcus Folkesson
2022-07-27 16:46 ` [PATCH v2 02/10] dt-bindings: iio: accel: " Krzysztof Kozlowski
2022-07-31 15:49 ` Jonathan Cameron
2022-08-03 21:29 ` Rob Herring
2022-08-04 7:27 ` Krzysztof Kozlowski
2022-08-06 17:31 ` Jonathan Cameron
2022-07-27 16:46 ` [PATCH v2 03/10] dt-bindings: iio: amplifiers: adi,ada4250: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 04/10] dt-bindings: iio: dac: " Krzysztof Kozlowski
2022-07-30 22:43 ` Lukas Wunner
2022-07-27 16:46 ` [PATCH v2 05/10] dt-bindings: iio: frequency: adf4371: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 06/10] dt-bindings: iio: health: ti,afe4403: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 07/10] dt-bindings: iio: imu: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 08/10] dt-bindings: iio: potentiometer: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 09/10] dt-bindings: iio: samsung,sensorhub-rinato: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 10/10] dt-bindings: iio: temperature: " Krzysztof Kozlowski
2022-07-30 22:46 ` [PATCH v2 00/10] dt-bindings: iio: " Lukas Wunner
2022-08-01 15:45 ` Krzysztof Kozlowski
2022-08-01 16:04 ` Lukas Wunner
2022-08-02 8:00 ` Krzysztof Kozlowski
2022-08-03 21:40 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220727164646.387541-1-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Michael.Hennerich@analog.com \
--cc=akinobu.mita@gmail.com \
--cc=alazar@startmail.com \
--cc=alexandru.tachici@analog.com \
--cc=angelo.compagnucci@gmail.com \
--cc=antoniu.miclaus@analog.com \
--cc=beniamin.bia@analog.com \
--cc=bogdan.pricop@emutex.com \
--cc=charles-antoine.couret@essensium.com \
--cc=cmc@babblebit.net \
--cc=cosmin.tanislav@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=dragos.bogdan@analog.com \
--cc=gregory.clement@bootlin.com \
--cc=jacopo@jmondi.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=kent@minoris.se \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=lorenzo@kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=lukas@wunner.de \
--cc=manabian@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=marcus.folkesson@gmail.com \
--cc=martenli@axis.com \
--cc=matt.ranostay@konsulko.com \
--cc=mike.looijmans@topic.nl \
--cc=miquel.raynal@bootlin.com \
--cc=mwelling@ieee.org \
--cc=navin@linumiz.com \
--cc=oskar.andero@gmail.com \
--cc=patrick.vasseur@c-s.fr \
--cc=preid@electromag.com.au \
--cc=puranjay12@gmail.com \
--cc=ribalda@kernel.org \
--cc=rjones@gateworks.com \
--cc=robh+dt@kernel.org \
--cc=sean@geanix.com \
--cc=sst@poczta.fm \
--cc=stefan.popa@analog.com \
--cc=stephan@gerhold.net \
--cc=tomas.melin@vaisala.com \
--cc=tomislav.denis@avl.com \
--cc=tremyfr@yahoo.fr \
--cc=vladimir.barinov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).