From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lucas Stankus" <lucas.p.stankus@gmail.com>,
"Puranjay Mohan" <puranjay12@gmail.com>,
"Cosmin Tanislav" <cosmin.tanislav@analog.com>,
"Alexandru Tachici" <alexandru.tachici@analog.com>,
"Marcelo Schmitt" <marcelo.schmitt1@gmail.com>,
"Marcus Folkesson" <marcus.folkesson@gmail.com>,
"Kent Gustavsson" <kent@minoris.se>,
"Tomislav Denis" <tomislav.denis@avl.com>,
"Oleksij Rempel" <linux@rempel-privat.de>,
kernel@pengutronix.de,
"Antoniu Miclaus" <antoniu.miclaus@analog.com>,
"Ricardo Ribalda" <ribalda@kernel.org>,
"Dragos Bogdan" <dragos.bogdan@analog.com>,
"Jean-Baptiste Maneyrol" <jmaneyrol@invensense.com>,
"Lorenzo Bianconi" <lorenzo@kernel.org>,
"Stefan Popa" <stefan.popa@analog.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Stephan Gerhold" <stephan@gerhold.net>,
"Mike Looijmans" <mike.looijmans@topic.nl>,
"Joachim Eastwood" <manabian@gmail.com>,
"Tomas Melin" <tomas.melin@vaisala.com>,
"Sean Nyekjaer" <sean@geanix.com>,
"Beniamin Bia" <beniamin.bia@analog.com>,
"Patrick Vasseur" <patrick.vasseur@c-s.fr>,
"Charles-Antoine Couret" <charles-antoine.couret@essensium.com>,
"Vladimir Barinov" <vladimir.barinov@cogentembedded.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Philippe Reynes" <tremyfr@yahoo.fr>,
"Jacopo Mondi" <jacopo@jmondi.org>,
"Akinobu Mita" <akinobu.mita@gmail.com>,
"Alexandru Lazar" <alazar@startmail.com>,
"Oskar Andero" <oskar.andero@gmail.com>,
"Mårten Lindahl" <martenli@axis.com>,
"Bogdan Pricop" <bogdan.pricop@emutex.com>,
"Angelo Compagnucci" <angelo.compagnucci@gmail.com>,
"Matt Ranostay" <matt.ranostay@konsulko.com>,
"Dan Murphy" <dmurphy@ti.com>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Phil Reid" <preid@electromag.com.au>,
"Michael Welling" <mwelling@ieee.org>,
"Lukas Wunner" <lukas@wunner.de>,
"Robert Jones" <rjones@gateworks.com>,
"Chris Coffey" <cmc@babblebit.net>,
"Slawomir Stepien" <sst@poczta.fm>,
"Sankar Velliangiri" <navin@linumiz.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 07/10] dt-bindings: iio: imu: use spi-peripheral-props.yaml
Date: Wed, 27 Jul 2022 18:46:43 +0200 [thread overview]
Message-ID: <20220727164646.387541-8-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220727164646.387541-1-krzysztof.kozlowski@linaro.org>
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/imu/adi,adis16460.yaml | 7 ++++---
.../devicetree/bindings/iio/imu/adi,adis16480.yaml | 9 +++++----
.../devicetree/bindings/iio/imu/bosch,bmi160.yaml | 7 ++++---
.../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 6 ++++--
.../devicetree/bindings/iio/imu/invensense,mpu6050.yaml | 5 ++---
.../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 7 ++++---
.../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 9 +++++----
7 files changed, 28 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..d166dbca18c3 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,8 +25,6 @@ properties:
spi-cpol: true
- spi-max-frequency: true
-
interrupts:
maxItems: 1
@@ -35,7 +33,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index dd29dc6c4c19..56e0dc20f5e4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -47,8 +47,6 @@ properties:
- DIO3
- DIO4
- spi-max-frequency: true
-
spi-cpha: true
spi-cpol: true
@@ -96,8 +94,6 @@ properties:
- DIO3
- DIO4
-additionalProperties: false
-
required:
- compatible
- reg
@@ -106,6 +102,11 @@ required:
- spi-cpol
- spi-max-frequency
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..a0760382548d 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,13 +46,14 @@ properties:
mount-matrix:
description: an optional 3x3 mounting rotation matrix
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..488349755c99 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -47,7 +47,6 @@ properties:
vddio-supply:
description: Regulator that provides power to the bus
- spi-max-frequency: true
spi-cpha: true
spi-cpol: true
@@ -56,7 +55,10 @@ required:
- reg
- interrupts
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index 3ebc6526d82d..ec64d7877fe5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -40,8 +40,6 @@ properties:
interrupts:
maxItems: 1
- spi-max-frequency: true
-
vdd-supply: true
vddio-supply: true
@@ -54,6 +52,7 @@ properties:
These devices also support an auxiliary i2c bus via an i2c-gate.
allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
not:
properties:
@@ -67,7 +66,7 @@ allOf:
properties:
i2c-gate: false
-additionalProperties: false
+unevaluatedProperties: false
required:
- compatible
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 479e7065d4eb..beeaa3c902cd 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -36,13 +36,14 @@ properties:
drive-open-drain:
type: boolean
- spi-max-frequency: true
-
required:
- compatible
- reg
-additionalProperties: false
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index 5d4839f00898..0ceb29fb01b7 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -45,8 +45,6 @@ properties:
description:
Supports up to 2 interrupt lines via the INT1 and INT2 pins.
- spi-max-frequency: true
-
vdd-supply:
description: if defined provides VDD power to the sensor.
@@ -81,12 +79,15 @@ properties:
wakeup-source:
$ref: /schemas/types.yaml#/definitions/flag
-additionalProperties: false
-
required:
- compatible
- reg
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
--
2.34.1
next prev parent reply other threads:[~2022-07-27 17:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-27 16:46 [PATCH v2 00/10] dt-bindings: iio: use spi-peripheral-props.yaml Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 01/10] dt-bindings: iio: adc: " Krzysztof Kozlowski
2022-07-27 16:56 ` Marcus Folkesson
2022-07-27 16:46 ` [PATCH v2 02/10] dt-bindings: iio: accel: " Krzysztof Kozlowski
2022-07-31 15:49 ` Jonathan Cameron
2022-08-03 21:29 ` Rob Herring
2022-08-04 7:27 ` Krzysztof Kozlowski
2022-08-06 17:31 ` Jonathan Cameron
2022-07-27 16:46 ` [PATCH v2 03/10] dt-bindings: iio: amplifiers: adi,ada4250: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 04/10] dt-bindings: iio: dac: " Krzysztof Kozlowski
2022-07-30 22:43 ` Lukas Wunner
2022-07-27 16:46 ` [PATCH v2 05/10] dt-bindings: iio: frequency: adf4371: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 06/10] dt-bindings: iio: health: ti,afe4403: " Krzysztof Kozlowski
2022-07-27 16:46 ` Krzysztof Kozlowski [this message]
2022-07-27 16:46 ` [PATCH v2 08/10] dt-bindings: iio: potentiometer: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 09/10] dt-bindings: iio: samsung,sensorhub-rinato: " Krzysztof Kozlowski
2022-07-27 16:46 ` [PATCH v2 10/10] dt-bindings: iio: temperature: " Krzysztof Kozlowski
2022-07-30 22:46 ` [PATCH v2 00/10] dt-bindings: iio: " Lukas Wunner
2022-08-01 15:45 ` Krzysztof Kozlowski
2022-08-01 16:04 ` Lukas Wunner
2022-08-02 8:00 ` Krzysztof Kozlowski
2022-08-03 21:40 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220727164646.387541-8-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Michael.Hennerich@analog.com \
--cc=akinobu.mita@gmail.com \
--cc=alazar@startmail.com \
--cc=alexandru.tachici@analog.com \
--cc=angelo.compagnucci@gmail.com \
--cc=antoniu.miclaus@analog.com \
--cc=beniamin.bia@analog.com \
--cc=bogdan.pricop@emutex.com \
--cc=charles-antoine.couret@essensium.com \
--cc=cmc@babblebit.net \
--cc=cosmin.tanislav@analog.com \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=dragos.bogdan@analog.com \
--cc=gregory.clement@bootlin.com \
--cc=jacopo@jmondi.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=kent@minoris.se \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rempel-privat.de \
--cc=lorenzo@kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=lukas@wunner.de \
--cc=manabian@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=marcus.folkesson@gmail.com \
--cc=martenli@axis.com \
--cc=matt.ranostay@konsulko.com \
--cc=mike.looijmans@topic.nl \
--cc=miquel.raynal@bootlin.com \
--cc=mwelling@ieee.org \
--cc=navin@linumiz.com \
--cc=oskar.andero@gmail.com \
--cc=patrick.vasseur@c-s.fr \
--cc=preid@electromag.com.au \
--cc=puranjay12@gmail.com \
--cc=ribalda@kernel.org \
--cc=rjones@gateworks.com \
--cc=robh+dt@kernel.org \
--cc=sean@geanix.com \
--cc=sst@poczta.fm \
--cc=stefan.popa@analog.com \
--cc=stephan@gerhold.net \
--cc=tomas.melin@vaisala.com \
--cc=tomislav.denis@avl.com \
--cc=tremyfr@yahoo.fr \
--cc=vladimir.barinov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).