* [PATCH 0/2] Add support for parallel port devices Netmos 9900 and Asix 99100 @ 2022-08-06 11:31 Alexander Baehr 2022-08-06 11:31 ` [PATCH 1/2] Add parport support for Netmos device 9900 Alexander Baehr 2022-08-06 11:31 ` [PATCH 2/2] Add parport support for Asix device 99100 Alexander Baehr 0 siblings, 2 replies; 5+ messages in thread From: Alexander Baehr @ 2022-08-06 11:31 UTC (permalink / raw) To: Sudip Mukherjee; +Cc: Greg Kroah-Hartman, LKML Support for the established parallel port devices Netmos 9900 and Asix 99100 was lacking. This patch queue adds support for them and was successfullly tested on the two devices. Signed-off-by: Alexander Baehr <abaehr@osadl.org> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] Add parport support for Netmos device 9900 2022-08-06 11:31 [PATCH 0/2] Add support for parallel port devices Netmos 9900 and Asix 99100 Alexander Baehr @ 2022-08-06 11:31 ` Alexander Baehr 2022-08-06 11:31 ` [PATCH 2/2] Add parport support for Asix device 99100 Alexander Baehr 1 sibling, 0 replies; 5+ messages in thread From: Alexander Baehr @ 2022-08-06 11:31 UTC (permalink / raw) To: Sudip Mukherjee; +Cc: Greg Kroah-Hartman, LKML The Netmos parallel port 9901 was already supported but the device 9900 was not. This patch adds the required settings for it and was successfully tested with the Netmos device 9900. Signed-off-by: Alexander Baehr <abaehr@osadl.org> --- drivers/parport/parport_pc.c | 4 ++++ 1 file changed, 4 insertions(+) Index: linux-5.19.0-rt7/drivers/parport/parport_pc.c =================================================================== --- linux-5.19.0-rt7.orig/drivers/parport/parport_pc.c +++ linux-5.19.0-rt7/drivers/parport/parport_pc.c @@ -2604,6 +2604,7 @@ enum parport_pc_pci_cards { oxsemi_pcie_pport, aks_0100, mobility_pp, + netmos_9900, netmos_9705, netmos_9715, netmos_9755, @@ -2665,6 +2666,7 @@ static struct parport_pc_pci { /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, + /* netmos_9900 */ { 1, { { 0, -1 }, } }, /* The netmos entries below are untested */ /* netmos_9705 */ { 1, { { 0, -1 }, } }, @@ -2746,6 +2748,8 @@ static const struct pci_device_id parpor PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 }, { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, /* NetMos communication controllers */ + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900, + 0xA000, 0x2000, 0, 0, netmos_9900 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9715, ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/2] Add parport support for Asix device 99100 2022-08-06 11:31 [PATCH 0/2] Add support for parallel port devices Netmos 9900 and Asix 99100 Alexander Baehr 2022-08-06 11:31 ` [PATCH 1/2] Add parport support for Netmos device 9900 Alexander Baehr @ 2022-08-06 11:31 ` Alexander Baehr 2022-08-07 6:24 ` Greg Kroah-Hartman 2022-09-01 15:45 ` Greg Kroah-Hartman 1 sibling, 2 replies; 5+ messages in thread From: Alexander Baehr @ 2022-08-06 11:31 UTC (permalink / raw) To: Sudip Mukherjee; +Cc: Greg Kroah-Hartman, LKML For some reason, Asix decided to produce a parallel port that is fully compatible with Netmos device 9900, but named it 99100. It obviously has another vendor ID, but the device ID is the same. This patch adds the required settings and was successfully tested with the Asix device. Signed-off-by: Alexander Baehr <abaehr@osadl.org> --- drivers/parport/parport_pc.c | 4 ++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 7 insertions(+) Index: linux/drivers/parport/parport_pc.c =================================================================== --- linux.orig/drivers/parport/parport_pc.c +++ linux/drivers/parport/parport_pc.c @@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards { netmos_9815, netmos_9901, netmos_9865, + asix_ax99100, quatech_sppxp100, wch_ch382l, }; @@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor 0xA000, 0x1000, 0, 0, netmos_9865 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, 0xA000, 0x2000, 0, 0, netmos_9865 }, + /* Asix AX99100 Parallel port PCIExpressCard */ + { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100, + 0xA000, 0x2000, 0, 0, netmos_9900 }, /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, Index: linux/include/linux/pci_ids.h =================================================================== --- linux.orig/include/linux/pci_ids.h +++ linux/include/linux/pci_ids.h @@ -3108,4 +3108,7 @@ #define PCI_VENDOR_ID_NCUBE 0x10ff +#define PCI_VENDOR_ID_ASIX 0x125b +#define PCI_DEVICE_ID_AX99100 0x9100 + #endif /* _LINUX_PCI_IDS_H */ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] Add parport support for Asix device 99100 2022-08-06 11:31 ` [PATCH 2/2] Add parport support for Asix device 99100 Alexander Baehr @ 2022-08-07 6:24 ` Greg Kroah-Hartman 2022-09-01 15:45 ` Greg Kroah-Hartman 1 sibling, 0 replies; 5+ messages in thread From: Greg Kroah-Hartman @ 2022-08-07 6:24 UTC (permalink / raw) To: Alexander Baehr; +Cc: Sudip Mukherjee, LKML On Sat, Aug 06, 2022 at 01:31:26PM +0200, Alexander Baehr wrote: > For some reason, Asix decided to produce a parallel port that is fully > compatible with Netmos device 9900, but named it 99100. It obviously has > another vendor ID, but the device ID is the same. This patch adds the > required settings and was successfully tested with the Asix device. > > Signed-off-by: Alexander Baehr <abaehr@osadl.org> > --- > drivers/parport/parport_pc.c | 4 ++++ > include/linux/pci_ids.h | 3 +++ > 2 files changed, 7 insertions(+) > > Index: linux/drivers/parport/parport_pc.c > =================================================================== > --- linux.orig/drivers/parport/parport_pc.c > +++ linux/drivers/parport/parport_pc.c > @@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards { > netmos_9815, > netmos_9901, > netmos_9865, > + asix_ax99100, > quatech_sppxp100, > wch_ch382l, > }; > @@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor > 0xA000, 0x1000, 0, 0, netmos_9865 }, > { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, > 0xA000, 0x2000, 0, 0, netmos_9865 }, > + /* Asix AX99100 Parallel port PCIExpressCard */ > + { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100, > + 0xA000, 0x2000, 0, 0, netmos_9900 }, > /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ > { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, > PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, > Index: linux/include/linux/pci_ids.h > =================================================================== > --- linux.orig/include/linux/pci_ids.h > +++ linux/include/linux/pci_ids.h > @@ -3108,4 +3108,7 @@ > > #define PCI_VENDOR_ID_NCUBE 0x10ff > > +#define PCI_VENDOR_ID_ASIX 0x125b > +#define PCI_DEVICE_ID_AX99100 0x9100 Please read the top of this file for why we shouldn't be added new entries to it. thanks, greg k-h ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] Add parport support for Asix device 99100 2022-08-06 11:31 ` [PATCH 2/2] Add parport support for Asix device 99100 Alexander Baehr 2022-08-07 6:24 ` Greg Kroah-Hartman @ 2022-09-01 15:45 ` Greg Kroah-Hartman 1 sibling, 0 replies; 5+ messages in thread From: Greg Kroah-Hartman @ 2022-09-01 15:45 UTC (permalink / raw) To: Alexander Baehr; +Cc: Sudip Mukherjee, LKML On Sat, Aug 06, 2022 at 01:31:26PM +0200, Alexander Baehr wrote: > For some reason, Asix decided to produce a parallel port that is fully > compatible with Netmos device 9900, but named it 99100. It obviously has > another vendor ID, but the device ID is the same. This patch adds the > required settings and was successfully tested with the Asix device. > > Signed-off-by: Alexander Baehr <abaehr@osadl.org> > --- > drivers/parport/parport_pc.c | 4 ++++ > include/linux/pci_ids.h | 3 +++ > 2 files changed, 7 insertions(+) > > Index: linux/drivers/parport/parport_pc.c > =================================================================== > --- linux.orig/drivers/parport/parport_pc.c > +++ linux/drivers/parport/parport_pc.c > @@ -2612,6 +2612,7 @@ enum parport_pc_pci_cards { > netmos_9815, > netmos_9901, > netmos_9865, > + asix_ax99100, > quatech_sppxp100, > wch_ch382l, > }; > @@ -2766,6 +2767,9 @@ static const struct pci_device_id parpor > 0xA000, 0x1000, 0, 0, netmos_9865 }, > { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, > 0xA000, 0x2000, 0, 0, netmos_9865 }, > + /* Asix AX99100 Parallel port PCIExpressCard */ > + { PCI_VENDOR_ID_ASIX, PCI_DEVICE_ID_AX99100, > + 0xA000, 0x2000, 0, 0, netmos_9900 }, > /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ > { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, > PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, > Index: linux/include/linux/pci_ids.h > =================================================================== > --- linux.orig/include/linux/pci_ids.h > +++ linux/include/linux/pci_ids.h > @@ -3108,4 +3108,7 @@ > > #define PCI_VENDOR_ID_NCUBE 0x10ff > > +#define PCI_VENDOR_ID_ASIX 0x125b > +#define PCI_DEVICE_ID_AX99100 0x9100 Please read the top of this file for why to not add new ids to it. thanks, greg k-h ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-09-01 15:45 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-08-06 11:31 [PATCH 0/2] Add support for parallel port devices Netmos 9900 and Asix 99100 Alexander Baehr 2022-08-06 11:31 ` [PATCH 1/2] Add parport support for Netmos device 9900 Alexander Baehr 2022-08-06 11:31 ` [PATCH 2/2] Add parport support for Asix device 99100 Alexander Baehr 2022-08-07 6:24 ` Greg Kroah-Hartman 2022-09-01 15:45 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).