linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support
@ 2022-08-14  7:43 Liu Ying
  2022-08-14  7:43 ` [PATCH v4 1/2] drivers: bus: simple-pm-bus: Use clocks Liu Ying
  2022-08-14  7:43 ` [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding Liu Ying
  0 siblings, 2 replies; 5+ messages in thread
From: Liu Ying @ 2022-08-14  7:43 UTC (permalink / raw)
  To: devicetree, linux-arm-kernel, linux-kernel
  Cc: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer, kernel,
	festevam, linux-imx, saravanak, gregkh, geert+renesas,
	krzysztof.kozlowski, robh

Hi,

This series aims to add Freescale i.MX8qxp pixel link MSI bus support
by using the existing simple-pm-bus driver. A power domain and two input
clocks need to be enabled before the MSI bus accesses it's child devices,
which matches what a simple power-managed bus is(See simple-pm-bus.yaml).

Patch 1 enables/disables functional clock(s) as a bulk in the
simple-pm-bus driver when the simple-pm-bus is being power managed,
since the MSI bus takes the two input clocks as functional clocks.

Patch 2 adds dt-bindings for the MSI bus.

v3->v4:
* Drop patch 1 in v3, because simple-bus/simple-mfd devices probed by the
  simple-pm-bus driver should not be child nodes of simple-pm-bus at all,
  as simple-bus/simple-mfd's child devices PM operations cannot be propagated
  to simple-pm-bus. Those simple-bus/simple-mfd devices needs dedicated drivers.
* Drop unnecessary 'bus == NULL' check from simple_pm_bus_runtime_{suspend,resume}.
  for patch 1 in v4. (Geert)
* Add Geert's R-b tag on patch 1 in v4.
* Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)

v2->v3:
* Add a pattern property to allow child nodes in the MSI bus dt-binding. (Rob)

v1->v2:
Address Krzysztof's comments on patch 3:
* Add a select to explicitly select the MSI bus dt-binding.
* List 'simple-pm-bus' explicitly as one item of compatible strings.
* Require compatible and reg properties.
* Put reg property just after compatible property in example.


Liu Ying (2):
  drivers: bus: simple-pm-bus: Use clocks
  dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding

 .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml   | 232 ++++++++++++++++++
 drivers/bus/simple-pm-bus.c                   |  48 ++++
 2 files changed, 280 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml

-- 
2.37.1


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH v4 1/2] drivers: bus: simple-pm-bus: Use clocks
  2022-08-14  7:43 [PATCH v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support Liu Ying
@ 2022-08-14  7:43 ` Liu Ying
  2022-08-14  7:43 ` [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding Liu Ying
  1 sibling, 0 replies; 5+ messages in thread
From: Liu Ying @ 2022-08-14  7:43 UTC (permalink / raw)
  To: devicetree, linux-arm-kernel, linux-kernel
  Cc: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer, kernel,
	festevam, linux-imx, saravanak, gregkh, geert+renesas,
	krzysztof.kozlowski, robh

Simple Power-Managed bus controller may need functional clock(s)
to be enabled before child devices connected to the bus can be
accessed.  Get the clock(s) as a bulk and enable/disable the
clock(s) when the bus is being power managed.

One example is that Freescale i.MX8qxp pixel link MSI bus controller
needs MSI clock and AHB clock to be enabled before accessing child
devices.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v3->v4:
* Drop unnecessary 'bus == NULL' check from simple_pm_bus_runtime_{suspend,resume}.
  (Geert)
* Add Geert's R-b tag.

v1->v3:
* No change.

 drivers/bus/simple-pm-bus.c | 48 +++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/bus/simple-pm-bus.c b/drivers/bus/simple-pm-bus.c
index 6b8d6257ed8a..d7b043fefde9 100644
--- a/drivers/bus/simple-pm-bus.c
+++ b/drivers/bus/simple-pm-bus.c
@@ -8,17 +8,24 @@
  * for more details.
  */
 
+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
+struct simple_pm_bus {
+	struct clk_bulk_data *clks;
+	int num_clks;
+};
+
 static int simple_pm_bus_probe(struct platform_device *pdev)
 {
 	const struct device *dev = &pdev->dev;
 	const struct of_dev_auxdata *lookup = dev_get_platdata(dev);
 	struct device_node *np = dev->of_node;
 	const struct of_device_id *match;
+	struct simple_pm_bus *bus;
 
 	/*
 	 * Allow user to use driver_override to bind this driver to a
@@ -44,6 +51,16 @@ static int simple_pm_bus_probe(struct platform_device *pdev)
 			return -ENODEV;
 	}
 
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	bus->num_clks = devm_clk_bulk_get_all(&pdev->dev, &bus->clks);
+	if (bus->num_clks < 0)
+		return dev_err_probe(&pdev->dev, bus->num_clks, "failed to get clocks\n");
+
+	dev_set_drvdata(&pdev->dev, bus);
+
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
 	pm_runtime_enable(&pdev->dev);
@@ -67,6 +84,36 @@ static int simple_pm_bus_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int simple_pm_bus_runtime_suspend(struct device *dev)
+{
+	struct simple_pm_bus *bus = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(bus->num_clks, bus->clks);
+
+	return 0;
+}
+
+static int simple_pm_bus_runtime_resume(struct device *dev)
+{
+	struct simple_pm_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(bus->num_clks, bus->clks);
+	if (ret) {
+		dev_err(dev, "failed to enable clocks: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops simple_pm_bus_pm_ops = {
+	SET_RUNTIME_PM_OPS(simple_pm_bus_runtime_suspend,
+			   simple_pm_bus_runtime_resume, NULL)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
+};
+
 #define ONLY_BUS	((void *) 1) /* Match if the device is only a bus. */
 
 static const struct of_device_id simple_pm_bus_of_match[] = {
@@ -85,6 +132,7 @@ static struct platform_driver simple_pm_bus_driver = {
 	.driver = {
 		.name = "simple-pm-bus",
 		.of_match_table = simple_pm_bus_of_match,
+		.pm = &simple_pm_bus_pm_ops,
 	},
 };
 
-- 
2.37.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
  2022-08-14  7:43 [PATCH v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support Liu Ying
  2022-08-14  7:43 ` [PATCH v4 1/2] drivers: bus: simple-pm-bus: Use clocks Liu Ying
@ 2022-08-14  7:43 ` Liu Ying
  2022-08-14 18:35   ` Rob Herring
  1 sibling, 1 reply; 5+ messages in thread
From: Liu Ying @ 2022-08-14  7:43 UTC (permalink / raw)
  To: devicetree, linux-arm-kernel, linux-kernel
  Cc: robh+dt, krzysztof.kozlowski+dt, shawnguo, s.hauer, kernel,
	festevam, linux-imx, saravanak, gregkh, geert+renesas,
	krzysztof.kozlowski, robh

Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus.
It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
DSI and HDMI TX subsystems, like I2C controller, PWM controller,
MIPI DSI controller and Control and Status Registers (CSR) module.

Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
link MSI bus specific bindings.

Signed-off-by: Liu Ying <victor.liu@nxp.com>
---
v3->v4:
* Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)

v2->v3:
* Add a pattern property to allow child nodes. (Rob)

v1->v2:
Address Krzysztof's comments:
* Add a select to explicitly select the MSI bus dt-binding.
* List 'simple-pm-bus' explicitly as one item of compatible strings.
* Require compatible and reg properties.
* Put reg property just after compatible property in example.

 .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml   | 232 ++++++++++++++++++
 1 file changed, 232 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml

diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
new file mode 100644
index 000000000000..b568d0ce438d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
+  sitting together with the PHYs.  It is not the same as the MSI bus coming
+  from i.MX8 System Controller Unit (SCU) which is used to control power,
+  clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
+
+  i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
+  that is, MSI clock and AHB clock, need to be enabled so that peripherals
+  connected to the bus can be accessed. Also, the bus is part of a power
+  domain. The power domain needs to be enabled before the peripherals can
+  be accessed.
+
+  Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
+  like I2C controller, PWM controller, MIPI DSI controller and Control and
+  Status Registers (CSR) module, are accessed through the bus.
+
+  The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
+  pixel link MSI bus controller and does not allow SCFW user to control it.
+  So, the controller's registers cannot be accessed by SCFW user. Hence,
+  the interrupts generated by the controller don't make any sense from SCFW
+  user's point of view.
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'simple-pm-bus'.
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+      - const: simple-pm-bus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master gated clock from system
+      - description: AHB clock
+
+  clock-names:
+    items:
+      - const: msi
+      - const: ahb
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Devices attached to the bus
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    bus@56200000 {
+        compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
+        reg = <0x56200000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&dc0_irqsteer>;
+        interrupts = <320>;
+        ranges;
+        clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
+                 <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "msi", "ahb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        syscon@56221000 {
+            compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+            reg = <0x56221000 0x1000>;
+            clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+            clock-names = "ipg";
+
+            pxl2dpi {
+                compatible = "fsl,imx8qxp-pxl2dpi";
+                fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+                power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0>;
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+
+                    port@1 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <1>;
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+                };
+            };
+
+            ldb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx8qxp-ldb";
+                clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                         <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+                clock-names = "pixel", "bypass";
+                power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+                channel@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+
+                channel@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+            };
+        };
+
+        clock-controller@56223004 {
+            compatible = "fsl,imx8qxp-lpcg";
+            reg = <0x56223004 0x4>;
+            #clock-cells = <1>;
+            clocks = <&mipi_lvds_0_ipg_clk>;
+            clock-indices = <IMX_LPCG_CLK_4>;
+            clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+
+        phy@56228300 {
+            compatible = "fsl,imx8qxp-mipi-dphy";
+            reg = <0x56228300 0x100>;
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+            clock-names = "phy_ref";
+            #phy-cells = <0>;
+            fsl,syscon = <&mipi_lvds_0_csr>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+    };
-- 
2.37.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
  2022-08-14  7:43 ` [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding Liu Ying
@ 2022-08-14 18:35   ` Rob Herring
  2022-08-15  2:55     ` Liu Ying
  0 siblings, 1 reply; 5+ messages in thread
From: Rob Herring @ 2022-08-14 18:35 UTC (permalink / raw)
  To: Liu Ying
  Cc: gregkh, linux-arm-kernel, kernel, festevam, krzysztof.kozlowski,
	saravanak, geert+renesas, robh+dt, s.hauer, linux-imx,
	devicetree, linux-kernel, shawnguo, krzysztof.kozlowski+dt

On Sun, 14 Aug 2022 15:43:38 +0800, Liu Ying wrote:
> Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped bus.
> It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> MIPI DSI controller and Control and Status Registers (CSR) module.
> 
> Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> link MSI bus specific bindings.
> 
> Signed-off-by: Liu Ying <victor.liu@nxp.com>
> ---
> v3->v4:
> * Add child nodes in the example MSI bus node of the MSI bus dt-binding. (Krzysztof)
> 
> v2->v3:
> * Add a pattern property to allow child nodes. (Rob)
> 
> v1->v2:
> Address Krzysztof's comments:
> * Add a select to explicitly select the MSI bus dt-binding.
> * List 'simple-pm-bus' explicitly as one item of compatible strings.
> * Require compatible and reg properties.
> * Put reg property just after compatible property in example.
> 
>  .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml   | 232 ++++++++++++++++++
>  1 file changed, 232 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.example.dtb:0:0: /example-0/bus@56200000/syscon@56221000: failed to match any schema with compatible: ['fsl,imx8qxp-mipi-lvds-csr', 'syscon', 'simple-mfd']
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.example.dtb:0:0: /example-0/bus@56200000/syscon@56221000/pxl2dpi: failed to match any schema with compatible: ['fsl,imx8qxp-pxl2dpi']
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.example.dtb:0:0: /example-0/bus@56200000/syscon@56221000/ldb: failed to match any schema with compatible: ['fsl,imx8qxp-ldb']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding
  2022-08-14 18:35   ` Rob Herring
@ 2022-08-15  2:55     ` Liu Ying
  0 siblings, 0 replies; 5+ messages in thread
From: Liu Ying @ 2022-08-15  2:55 UTC (permalink / raw)
  To: Rob Herring
  Cc: gregkh, linux-arm-kernel, kernel, festevam, krzysztof.kozlowski,
	saravanak, geert+renesas, robh+dt, s.hauer, linux-imx,
	devicetree, linux-kernel, shawnguo, krzysztof.kozlowski+dt

On Sun, 2022-08-14 at 12:35 -0600, Rob Herring wrote:
> On Sun, 14 Aug 2022 15:43:38 +0800, Liu Ying wrote:
> > Freescale i.MX8qxp pixel link MSI bus is a simple memory-mapped
> > bus.
> > It is used to access peripherals in i.MX8qm/qxp imaging, LVDS, MIPI
> > DSI and HDMI TX subsystems, like I2C controller, PWM controller,
> > MIPI DSI controller and Control and Status Registers (CSR) module.
> > 
> > Reference simple-pm-bus bindings and add Freescale i.MX8qxp pixel
> > link MSI bus specific bindings.
> > 
> > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > ---
> > v3->v4:
> > * Add child nodes in the example MSI bus node of the MSI bus dt-
> > binding. (Krzysztof)
> > 
> > v2->v3:
> > * Add a pattern property to allow child nodes. (Rob)
> > 
> > v1->v2:
> > Address Krzysztof's comments:
> > * Add a select to explicitly select the MSI bus dt-binding.
> > * List 'simple-pm-bus' explicitly as one item of compatible
> > strings.
> > * Require compatible and reg properties.
> > * Put reg property just after compatible property in example.
> > 
> >  .../bus/fsl,imx8qxp-pixel-link-msi-bus.yaml   | 232
> > ++++++++++++++++++
> >  1 file changed, 232 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-
> > bus.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m
> dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-
> bus.example.dtb:0:0: /example-0/bus@56200000/syscon@56221000: failed
> to match any schema with compatible: ['fsl,imx8qxp-mipi-lvds-csr',
> 'syscon', 'simple-mfd']
> Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-
> bus.example.dtb:0:0: /example-0/bus@56200000/syscon@56221000/pxl2dpi:
> failed to match any schema with compatible: ['fsl,imx8qxp-pxl2dpi']
> Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-
> bus.example.dtb:0:0: /example-0/bus@56200000/syscon@56221000/ldb:
> failed to match any schema with compatible: ['fsl,imx8qxp-ldb']

I sent this a bit earlier than v6.0-rc1. Now, v6.0-rc1 is out and there
is no error if the base is v6.0-rc1.

> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/patch/
> 
> This check can fail if there are any dependencies. The base for a
> patch
> series is generally the most recent rc1.

Yes, there are dependencies if the base is v5.19-rc1.

> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up
> to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit.

Do I need to re-submit? Or, you may run "make DT_CHECKER_FLAGS=-m
dt_binding_check" upon v6.0-rc1?

Regards,
Liu Ying



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2022-08-15  2:56 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-14  7:43 [PATCH v4 0/2] drivers: bus: Add Freescale i.MX8qxp pixel link MSI bus support Liu Ying
2022-08-14  7:43 ` [PATCH v4 1/2] drivers: bus: simple-pm-bus: Use clocks Liu Ying
2022-08-14  7:43 ` [PATCH v4 2/2] dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding Liu Ying
2022-08-14 18:35   ` Rob Herring
2022-08-15  2:55     ` Liu Ying

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).