[patch 0/3] tick/sched: Ensure quiet_vmstat() is called when the idle tick was stopped too

* [patch 0/3] tick/sched: Ensure quiet_vmstat() is called when the idle tick was stopped too
@ 2022-08-17 19:01 Marcelo Tosatti
  2022-08-17 19:01 ` [PATCH v7 " Marcelo Tosatti
                   ` (4 more replies)
  0 siblings, 5 replies; 9+ messages in thread
From: Marcelo Tosatti @ 2022-08-17 19:01 UTC (permalink / raw)
  To: atomlin, frederic
  Cc: cl, tglx, mingo, peterz, pauld, neelx, oleksandr, linux-kernel, linux-mm

This patchset contains enhancements on top of Aaron's -v6 of the series
(see the changelog below).

It fixes the following problems two problems:

1) A customer provided some evidence which indicates that the idle tick was
stopped; albeit, CPU-specific vmstat counters still remained populated.
Thus one can only assume quiet_vmstat() was not invoked on return to the
idle loop.

If I understand correctly, I suspect this divergence might erroneously
prevent a reclaim attempt by kswapd. If the number of zone specific free
pages are below their per-cpu drift value then
zone_page_state_snapshot() is used to compute a more accurate view of
the aforementioned statistic.  Thus any task blocked on the NUMA node
specific pfmemalloc_wait queue will be unable to make significant
progress via direct reclaim unless it is killed after being woken up by
kswapd (see throttle_direct_reclaim()).

2) With a SCHED_FIFO task that busy loops on a given CPU, 
and kworker for that CPU at SCHED_OTHER priority, queuing
work to sync per-vmstats will either cause that work
to never execute, or stalld boosts kworker priority which 
causes a latency violation.

Follows the v6 cover letter, with updated changelog. The numbers, for
the test program attached at the end of this cover letter, executed
inside a KVM VM, are:

                                Vanilla                 Patch

cycles per idle loop            151858                  153258  (+1.0%)

cycles per syscall              8461                    8690    (+2.6%)

--------

I have incorporated an idea from Marcelo's patch [1] where a CPU-specific
variable is used to indicate if a vmstat differential/or imbalance is
present for a given CPU. So, at the appropriate time, vmstat processing can
be initiated. The hope is that this particular approach is "cheaper" when
compared to need_update() - used currently; in the context of nohz_full and
the scheduling-clock tick being stopped, we would now with this patch,
check if a CPU-specific vmstat imbalance is present before exiting
user-mode (see tick_nohz_user_enter_prepare()).

This trivial test program [2] was used to determine the somewhat impact
under vanilla and with the proposed changes; mlock(2) and munlock(2) was
used solely to modify vmstat item 'NR_MLOCK'. The following is an average
count of CPU-cycles across the aforementioned system calls and the idle
loop, respectively. I believe these results are negligible:

	  Modified		   |  		Vanilla
                                   |
  cycles per syscall: 7399         | 	cycles per syscall: 4150
  cycles per idle loop: 141048     |	cycles per idle loop: 144730
                                   |

Any feedback would be appreciated. Thanks.

Changes since v6 [6]:
 - sync vmstats independently of whether vmstat_update work is queued or not
 - clean vmstat_dirty before differential sync loop
 - cancel pending work if tick stopped
 - do not queue work to remote CPU if tick stopped

Changes since v5 [3]:

 - Introduced __tick_nohz_user_enter_prepare()
 - Switched to EXPORT_SYMBOL_GPL()

Changes since v4 [4]:

 - Moved vmstat_dirty specific changes into a separate patch
   (Marcelo Tosatti)

Changes since v3 [5]:

 - Used EXPORT_SYMBOL() on tick_nohz_user_enter_prepare()
 - Replaced need_update()
 - Introduced CPU-specific variable namely vmstat_dirty
   and mark_vmstat_dirty()

[1]: https://lore.kernel.org/lkml/20220204173554.763888172@fedora.localdomain/
[2]: https://pastebin.com/8AtzSAuK
[3]: https://lore.kernel.org/lkml/20220801234258.134609-1-atomlin@redhat.com/
[4]: https://lore.kernel.org/lkml/20220621172207.1501641-1-atomlin@redhat.com/
[5]: https://lore.kernel.org/lkml/20220422193647.3808657-1-atomlin@redhat.com/
[6]: https://lore.kernel.org/linux-mm/20220808194820.676246-1-atomlin@redhat.com/

 include/linux/tick.h     |    5 +++--
 kernel/time/tick-sched.c |   19 ++++++++++++++++++-
 mm/vmstat.c              |   74 ++++++++++++++++++++++++++++++++++++--------------------------------------
 3 files changed, 57 insertions(+), 41 deletions(-)

--- test-vmstat-overhead.c ---

#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <unistd.h>
#include <string.h>

typedef unsigned long long cycles_t;
typedef unsigned long long usecs_t;
typedef unsigned long long u64;

#ifdef __x86_64__
#define DECLARE_ARGS(val, low, high)    unsigned long low, high
#define EAX_EDX_VAL(val, low, high)     ((low) | ((u64)(high) << 32))
#define EAX_EDX_ARGS(val, low, high)    "a" (low), "d" (high)
#define EAX_EDX_RET(val, low, high)     "=a" (low), "=d" (high)
#else
#define DECLARE_ARGS(val, low, high)    unsigned long long val
#define EAX_EDX_VAL(val, low, high)     (val)
#define EAX_EDX_ARGS(val, low, high)    "A" (val)
#define EAX_EDX_RET(val, low, high)     "=A" (val)
#endif

static inline unsigned long long __rdtscll(void)
{
        DECLARE_ARGS(val, low, high);

        asm volatile("cpuid; rdtsc" : EAX_EDX_RET(val, low, high));

        return EAX_EDX_VAL(val, low, high);
}

#define rdtscll(val) do { (val) = __rdtscll(); } while (0)

#define NRSYSCALLS 30000
#define NRSLEEPS   100000

void main(int argc, char *argv[])
{
	unsigned long a, b, cycles;
	int i, syscall = 0;
	void *page = malloc(4096);

	if (mlock(page, 4096))
		perror("mlock");
	if (munlock(page, 4096))
		perror("munlock");

	if (argc != 2) {
		printf("usage: %s {idle,syscall}\n", argv[0]);
		exit(1);
	}

        rdtscll(a);

	if (strncmp("idle", argv[1], 4) == 0)
		syscall = 0;
	else if (strncmp("syscall", argv[1], 7) == 0)
		syscall = 1;
	else {
		printf("usage: %s {idle,syscall}\n", argv[0]);
		exit(1);
	}

	if (syscall == 1) {
        	for (i = 0; i < NRSYSCALLS; i++) {
			if (mlock(page, 4096))
				perror("mlock");
			if (munlock(page, 4096))
				perror("munlock");
		}
	} else {
        	for (i = 0; i < NRSLEEPS; i++)
		 	usleep(10);
	}

        rdtscll(b);

        cycles = b - a;

	if (syscall == 1)
        	printf("cycles per syscall: %d\n", (b-a)/(NRSYSCALLS*2));
	else
		printf("cycles per idle loop: %d\n", (b-a)/NRSLEEPS);
}

^ permalink raw reply	[flat|nested] 9+ messages in thread