[PATCH v1 0/2] Fix chrontel-ch7033 reversion

[PATCH v1 0/2] Fix chrontel-ch7033 reversion

[Robert Foss]

When the chrontel-ch7033 series from Chris Morgan was reverted[1], I made mistake.

Patch 2/2 in this[1] series reverts [2] when it should have reverted [3].

This series fixes this mistake.


[1] https://lore.kernel.org/all/20220912113856.817188-1-robert.foss@linaro.org/
[2] c312b0df3b13 - drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP
[3] ce9564cfc9ae - drm/bridge: chrontel-ch7033: Add byteswap order setting

Robert Foss (2):
  Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector
    operations for DP""
  Revert "drm/bridge: chrontel-ch7033: Add byteswap order setting"

 drivers/gpu/drm/bridge/chrontel-ch7033.c | 15 ++-----------
 drivers/gpu/drm/bridge/ti-sn65dsi86.c    | 28 ++++++++++++++++++++++++
 2 files changed, 30 insertions(+), 13 deletions(-)

-- 
2.34.1

[PATCH v1 1/2] Revert "Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP""

[Robert Foss]

This commit was accidentally reverted instead of another commit, and
therefore needs to be reinstated.

This reverts commit 8c9c40ec83445b188fb6b59e119bf5c2de81b02d.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 28 +++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 6e053e2af229..3c3561942eb6 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -29,6 +29,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_bridge_connector.h>
+#include <drm/drm_edid.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
@@ -68,6 +69,7 @@
 #define  BPP_18_RGB				BIT(0)
 #define SN_HPD_DISABLE_REG			0x5C
 #define  HPD_DISABLE				BIT(0)
+#define  HPD_DEBOUNCED_STATE			BIT(4)
 #define SN_GPIO_IO_REG				0x5E
 #define  SN_GPIO_INPUT_SHIFT			4
 #define  SN_GPIO_OUTPUT_SHIFT			0
@@ -1158,10 +1160,33 @@ static void ti_sn_bridge_atomic_post_disable(struct drm_bridge *bridge,
 	pm_runtime_put_sync(pdata->dev);
 }
 
+static enum drm_connector_status ti_sn_bridge_detect(struct drm_bridge *bridge)
+{
+	struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
+	int val = 0;
+
+	pm_runtime_get_sync(pdata->dev);
+	regmap_read(pdata->regmap, SN_HPD_DISABLE_REG, &val);
+	pm_runtime_put_autosuspend(pdata->dev);
+
+	return val & HPD_DEBOUNCED_STATE ? connector_status_connected
+					 : connector_status_disconnected;
+}
+
+static struct edid *ti_sn_bridge_get_edid(struct drm_bridge *bridge,
+					  struct drm_connector *connector)
+{
+	struct ti_sn65dsi86 *pdata = bridge_to_ti_sn65dsi86(bridge);
+
+	return drm_get_edid(connector, &pdata->aux.ddc);
+}
+
 static const struct drm_bridge_funcs ti_sn_bridge_funcs = {
 	.attach = ti_sn_bridge_attach,
 	.detach = ti_sn_bridge_detach,
 	.mode_valid = ti_sn_bridge_mode_valid,
+	.get_edid = ti_sn_bridge_get_edid,
+	.detect = ti_sn_bridge_detect,
 	.atomic_pre_enable = ti_sn_bridge_atomic_pre_enable,
 	.atomic_enable = ti_sn_bridge_atomic_enable,
 	.atomic_disable = ti_sn_bridge_atomic_disable,
@@ -1257,6 +1282,9 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
 	pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
 			   ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
 
+	if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
+		pdata->bridge.ops = DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_DETECT;
+
 	drm_bridge_add(&pdata->bridge);
 
 	ret = ti_sn_attach_host(pdata);
-- 
2.34.1

[PATCH v1 2/2] Revert "drm/bridge: chrontel-ch7033: Add byteswap order setting"

[Robert Foss]

Revert this patch since it depends on devicetree functionality that
previously has been reverted in the below commit.

commit e798ba3374a1 ("Revert "dt-bindings: Add byteswap order to chrontel ch7033"")

This reverts commit ce9564cfc9aea65e68eb343c599317633bc2321a.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/gpu/drm/bridge/chrontel-ch7033.c | 15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/bridge/chrontel-ch7033.c b/drivers/gpu/drm/bridge/chrontel-ch7033.c
index c5719908ce2d..ba060277c3fd 100644
--- a/drivers/gpu/drm/bridge/chrontel-ch7033.c
+++ b/drivers/gpu/drm/bridge/chrontel-ch7033.c
@@ -68,7 +68,6 @@ enum {
 	BYTE_SWAP_GBR	= 3,
 	BYTE_SWAP_BRG	= 4,
 	BYTE_SWAP_BGR	= 5,
-	BYTE_SWAP_MAX	= 6,
 };
 
 /* Page 0, Register 0x19 */
@@ -356,8 +355,6 @@ static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
 	int hsynclen = mode->hsync_end - mode->hsync_start;
 	int vbporch = mode->vsync_start - mode->vdisplay;
 	int vsynclen = mode->vsync_end - mode->vsync_start;
-	u8 byte_swap;
-	int ret;
 
 	/*
 	 * Page 4
@@ -401,16 +398,8 @@ static void ch7033_bridge_mode_set(struct drm_bridge *bridge,
 	regmap_write(priv->regmap, 0x15, vbporch);
 	regmap_write(priv->regmap, 0x16, vsynclen);
 
-	/* Input color swap. Byte order is optional and will default to
-	 * BYTE_SWAP_BGR to preserve backwards compatibility with existing
-	 * driver.
-	 */
-	ret = of_property_read_u8(priv->bridge.of_node, "chrontel,byteswap",
-				  &byte_swap);
-	if (!ret && byte_swap < BYTE_SWAP_MAX)
-		regmap_update_bits(priv->regmap, 0x18, SWAP, byte_swap);
-	else
-		regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR);
+	/* Input color swap. */
+	regmap_update_bits(priv->regmap, 0x18, SWAP, BYTE_SWAP_BGR);
 
 	/* Input clock and sync polarity. */
 	regmap_update_bits(priv->regmap, 0x19, 0x1, mode->clock >> 16);
-- 
2.34.1