From: tumic@gpxsee.org
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Michal Simek <michal.simek@xilinx.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
dmaengine@vger.kernel.org, linux-i2c@vger.kernel.org,
"Martin Tůma" <martin.tuma@digiteqautomotive.com>
Subject: [PATCH v2 0/3] Digiteq Automotive MGB4 driver
Date: Mon, 19 Sep 2022 20:55:53 +0200 [thread overview]
Message-ID: <20220919185556.5215-1-tumic@gpxsee.org> (raw)
From: Martin Tůma <martin.tuma@digiteqautomotive.com>
Hi,
This series of patches adds a driver for the Digiteq Automotive MGB4 grabber
card. MGB4 is a modular frame grabber PCIe card for automotive video interfaces
(FPD-Link and GMSL for now). It is based on a Xilinx FPGA and uses their
XDMA IP core for DMA transfers. Additionally, Xilinx I2C and SPI IP cores
which already have drivers in linux are used in the design.
Except of the required xiic driver alias, the patches are split into two parts:
the XDMA driver and a "standard" v4l2 device driver. The XDMA driver is
originally based on Xilinx's sample code that can be found at:
https://github.com/Xilinx/dma_ip_drivers
The rest is a quite standard v4l2 driver, with one exception - there are
a lot of sysfs options that may/must be set before opening the v4l2 device
to adapt the card on a specific signal (see mgb4-sysfs.rst for details)
as the card must be able to work with various signal sources (or displays)
that can not be auto-detected.
I have run the driver through the v4l2-compliance test suite for both the
input and the output and the results look fine to me (I can provide the
output if required).
Changes in v2:
* Completely rewritten the original Xilinx's XDMA driver to meet kernel code
standards.
* Added all required "to" and "cc" mail addresses.
Martin Tůma (3):
Added platform module alias for the xiic I2C driver
Added Xilinx XDMA IP core driver
Added Digiteq Automotive MGB4 driver
Documentation/admin-guide/media/mgb4-iio.rst | 30 +
Documentation/admin-guide/media/mgb4-mtd.rst | 16 +
.../admin-guide/media/mgb4-sysfs.rst | 297 +++
drivers/dma/Kconfig | 7 +
drivers/dma/xilinx/Makefile | 1 +
drivers/dma/xilinx/xilinx_xdma.c | 2042 +++++++++++++++++
drivers/i2c/busses/i2c-xiic.c | 1 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 1 +
drivers/media/pci/mgb4/Kconfig | 17 +
drivers/media/pci/mgb4/Makefile | 6 +
drivers/media/pci/mgb4/mgb4_cmt.c | 243 ++
drivers/media/pci/mgb4/mgb4_cmt.h | 16 +
drivers/media/pci/mgb4/mgb4_core.c | 554 +++++
drivers/media/pci/mgb4/mgb4_core.h | 58 +
drivers/media/pci/mgb4/mgb4_i2c.c | 139 ++
drivers/media/pci/mgb4/mgb4_i2c.h | 35 +
drivers/media/pci/mgb4/mgb4_io.h | 36 +
drivers/media/pci/mgb4/mgb4_regs.c | 30 +
drivers/media/pci/mgb4/mgb4_regs.h | 35 +
drivers/media/pci/mgb4/mgb4_sysfs.h | 18 +
drivers/media/pci/mgb4/mgb4_sysfs_in.c | 750 ++++++
drivers/media/pci/mgb4/mgb4_sysfs_out.c | 734 ++++++
drivers/media/pci/mgb4/mgb4_sysfs_pci.c | 83 +
drivers/media/pci/mgb4/mgb4_trigger.c | 202 ++
drivers/media/pci/mgb4/mgb4_trigger.h | 8 +
drivers/media/pci/mgb4/mgb4_vin.c | 656 ++++++
drivers/media/pci/mgb4/mgb4_vin.h | 64 +
drivers/media/pci/mgb4/mgb4_vout.c | 502 ++++
drivers/media/pci/mgb4/mgb4_vout.h | 58 +
include/linux/dma/xilinx_xdma.h | 44 +
31 files changed, 6684 insertions(+)
create mode 100644 Documentation/admin-guide/media/mgb4-iio.rst
create mode 100644 Documentation/admin-guide/media/mgb4-mtd.rst
create mode 100644 Documentation/admin-guide/media/mgb4-sysfs.rst
create mode 100644 drivers/dma/xilinx/xilinx_xdma.c
create mode 100644 drivers/media/pci/mgb4/Kconfig
create mode 100644 drivers/media/pci/mgb4/Makefile
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.c
create mode 100644 drivers/media/pci/mgb4/mgb4_cmt.h
create mode 100644 drivers/media/pci/mgb4/mgb4_core.c
create mode 100644 drivers/media/pci/mgb4/mgb4_core.h
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.c
create mode 100644 drivers/media/pci/mgb4/mgb4_i2c.h
create mode 100644 drivers/media/pci/mgb4/mgb4_io.h
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.c
create mode 100644 drivers/media/pci/mgb4/mgb4_regs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs.h
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_in.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_out.c
create mode 100644 drivers/media/pci/mgb4/mgb4_sysfs_pci.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.c
create mode 100644 drivers/media/pci/mgb4/mgb4_trigger.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vin.h
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.c
create mode 100644 drivers/media/pci/mgb4/mgb4_vout.h
create mode 100644 include/linux/dma/xilinx_xdma.h
--
2.37.2
next reply other threads:[~2022-09-19 17:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-19 18:55 tumic [this message]
2022-09-19 18:55 ` [PATCH v2 1/3] Added platform module alias for the xiic I2C driver tumic
2022-09-20 14:30 ` Michal Simek
2022-09-19 18:55 ` [PATCH v2 2/3] Added Xilinx XDMA IP core driver tumic
2022-09-20 2:12 ` kernel test robot
2022-09-21 6:24 ` Lizhi Hou
2022-09-21 9:25 ` Martin Tůma
2022-09-21 15:15 ` Lizhi Hou
2022-09-21 15:35 ` Martin Tůma
2022-09-19 18:55 ` [PATCH v2 3/3] Added Digiteq Automotive MGB4 driver tumic
2022-10-03 5:19 ` kernel test robot
2022-09-21 5:32 ` [PATCH v2 0/3] " Sonal Santan
2022-09-21 9:44 ` Martin Tůma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220919185556.5215-1-tumic@gpxsee.org \
--to=tumic@gpxsee.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.tuma@digiteqautomotive.com \
--cc=mchehab@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).