* [PATCH 1/8] CMDLINE: add generic builtin command line
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 2/8] scripts: insert-sys-cert: add command line insert capability Daniel Walker
` (7 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev
Cc: xe-linux-external, Ruslan Bilovol, linux-kernel
This code allows architectures to use a generic builtin command line.
The state of the builtin command line options across architecture is
diverse. MIPS and X86 once has similar systems, then mips added some
options to allow extending the command line. Powerpc did something
simiar in adding the ability to extend. Even with mips and powerpc
enhancement the needs of Cisco are not met on these platforms.
The code in this commit unifies the code into a generic
header file under the CONFIG_GENERIC_CMDLINE option. When this
option is enabled the architecture can call the cmdline_add_builtin()
to add the builtin command line. The generic code provides both
append and/or prepend options and provides a way to redefine these
option after the kernel is compiled.
This code also includes test's which are meant to confirm
functionality.
This unified implementation offers the same functionality needed by
Cisco on all platform which we enable it on.
Cc: xe-linux-external@cisco.com
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
include/linux/cmdline.h | 103 +++++++++++++++++++++++++++++
init/Kconfig | 78 ++++++++++++++++++++++
lib/Kconfig | 4 ++
lib/Makefile | 3 +
lib/generic_cmdline.S | 53 +++++++++++++++
lib/test_cmdline1.c | 139 ++++++++++++++++++++++++++++++++++++++++
6 files changed, 380 insertions(+)
create mode 100644 include/linux/cmdline.h
create mode 100644 lib/generic_cmdline.S
create mode 100644 lib/test_cmdline1.c
diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
new file mode 100644
index 000000000000..34d9d8d14672
--- /dev/null
+++ b/include/linux/cmdline.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_CMDLINE_H
+#define _LINUX_CMDLINE_H
+/*
+ *
+ * Copyright (C) 2006,2021. Cisco Systems, Inc.
+ *
+ * Generic Append/Prepend cmdline support.
+ */
+
+
+#include <linux/ctype.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_CMDLINE_BOOL
+extern char cmdline_prepend[];
+extern char cmdline_append[];
+extern char cmdline_tmp[];
+#define CMDLINE_PREPEND cmdline_prepend
+#define CMDLINE_APPEND cmdline_append
+#define CMDLINE_TMP cmdline_tmp
+#define CMDLINE_STATIC_PREPEND CONFIG_CMDLINE_PREPEND
+#define CMDLINE_STATIC_APPEND CONFIG_CMDLINE_APPEND
+#else
+#define CMDLINE_PREPEND ""
+#define CMDLINE_APPEND ""
+#define CMDLINE_TMP ""
+#define CMDLINE_STATIC_PREPEND ""
+#define CMDLINE_STATIC_APPEND ""
+#endif
+
+#ifndef CMDLINE_STRLCAT
+#define CMDLINE_STRLCAT strlcat
+#endif
+
+#ifndef CMDLINE_STRLEN
+#define CMDLINE_STRLEN strlen
+#endif
+
+/*
+ * This function will append or prepend a builtin command line to the command
+ * line provided by the bootloader. Kconfig options can be used to alter
+ * the behavior of this builtin command line.
+ * @dest: The destination of the final appended/prepended string
+ * @tmp: temporary space used for prepending
+ * @prepend: string to prepend to @dest
+ * @append: string to append to @dest
+ * @length: the maximum length of the strings above.
+ * @cmdline_strlen: point to a compatible strlen
+ * @cmdline_strlcat: point to a compatible strlcat
+ * This function returns true when the builtin command line was copied successfully
+ * and false when there was not enough room to copy all parts of the command line.
+ */
+static inline bool
+__cmdline_add_builtin(
+ char *dest,
+ char *tmp,
+ char *prepend,
+ char *append,
+ unsigned long length,
+ size_t (*cmdline_strlen)(const char *s),
+ size_t (*cmdline_strlcat)(char *dest, const char *src, size_t count))
+{
+ size_t total_length = 0, tmp_length;
+
+ if (!IS_ENABLED(CONFIG_GENERIC_CMDLINE))
+ return true;
+
+ if (!IS_ENABLED(CONFIG_CMDLINE_BOOL))
+ return true;
+
+ if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE))
+ dest[0] = '\0';
+ else
+ total_length += cmdline_strlen(dest);
+
+ tmp_length = cmdline_strlen(append);
+ if (tmp_length > 0) {
+ cmdline_strlcat(dest, append, length);
+ total_length += tmp_length;
+ }
+
+ tmp_length = cmdline_strlen(prepend);
+ if (tmp_length > 0) {
+ cmdline_strlcat(tmp, prepend, length);
+ cmdline_strlcat(tmp, dest, length);
+ dest[0] = '\0';
+ cmdline_strlcat(dest, tmp, length);
+ total_length += tmp_length;
+ }
+
+ tmp[0] = '\0';
+
+ if (total_length > length)
+ return false;
+
+ return true;
+}
+
+#define cmdline_add_builtin(dest) \
+ __cmdline_add_builtin(dest, CMDLINE_TMP, CMDLINE_PREPEND, CMDLINE_APPEND, COMMAND_LINE_SIZE, CMDLINE_STRLEN, CMDLINE_STRLCAT)
+
+#endif
diff --git a/init/Kconfig b/init/Kconfig
index 5f5c776ef192..d72eb5a804c6 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -2034,6 +2034,84 @@ config PROFILING
config TRACEPOINTS
bool
+config GENERIC_CMDLINE
+ bool
+
+if GENERIC_CMDLINE
+
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ help
+ Allow for specifying boot arguments to the kernel at
+ build time. On some systems (e.g. embedded ones), it is
+ necessary or convenient to provide some or all of the
+ kernel boot arguments with the kernel itself (that is,
+ to not rely on the boot loader to provide them.)
+
+ To compile command line arguments into the kernel,
+ set this option to 'Y', then fill in the
+ the boot arguments in CONFIG_CMDLINE.
+
+ Systems with fully functional boot loaders (i.e. non-embedded)
+ should leave this option set to 'N'.
+
+config CMDLINE_APPEND
+ string "Built-in kernel command string append"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, this string is appended to it to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_PREPEND
+ string "Built-in kernel command string prepend"
+ depends on CMDLINE_BOOL
+ default ""
+ help
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, this string is prepended to it to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_EXTRA
+ bool "Reserve more space for inserting prepend and append without recompiling"
+ depends on CMDLINE_BOOL
+ help
+ If set, space for an append and prepend will be reserved in the kernel
+ image. This allows updating or changing the append and prepend to a large
+ string then the kernel was compiled for without recompiling the kernel.
+
+ The maximum size is the command line size for each prepend and append.
+
+config CMDLINE_OVERRIDE
+ bool "Built-in command line overrides boot loader arguments"
+ depends on CMDLINE_BOOL
+ help
+ Set this option to 'Y' to have the kernel ignore the boot loader
+ command line, and use ONLY the built-in command line. In this case
+ append and prepend strings are concatenated to form the full
+ command line.
+
+ This is used to work around broken boot loaders. This should
+ be set to 'N' under normal conditions.
+endif
+
endmenu # General setup
source "arch/Kconfig"
diff --git a/lib/Kconfig b/lib/Kconfig
index a38cc61256f1..b243c133ec13 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -672,6 +672,10 @@ config OBJAGG
config STRING_SELFTEST
tristate "Test string functions"
+config TEST_CMDLINE
+ depends on CMDLINE_BOOL && !CMDLINE_OVERRIDE
+ tristate "Test generic command line handling"
+
endmenu
config GENERIC_IOREMAP
diff --git a/lib/Makefile b/lib/Makefile
index b5307d3eec1a..6537d11d0cc0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -354,3 +354,6 @@ obj-$(CONFIG_BITS_TEST) += test_bits.o
obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
+
+obj-$(CONFIG_TEST_CMDLINE) += test_cmdline1.o
+obj-$(CONFIG_CMDLINE_BOOL) += generic_cmdline.o
diff --git a/lib/generic_cmdline.S b/lib/generic_cmdline.S
new file mode 100644
index 000000000000..223763f9eeb6
--- /dev/null
+++ b/lib/generic_cmdline.S
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/export.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+
+ __INITDATA
+
+ .align 8
+ .global cmdline_prepend
+cmdline_prepend:
+ .ifnc CONFIG_CMDLINE_PREPEND,""
+ .ascii CONFIG_CMDLINE_PREPEND
+ .string " "
+ .else
+ .byte 0x0
+ .endif
+#ifdef CONFIG_CMDLINE_EXTRA
+ .space COMMAND_LINE_SIZE - (.-cmdline_prepend)
+ .size cmdline_prepend, COMMAND_LINE_SIZE
+#endif /* CONFIG_CMDLINE_EXTRA */
+
+cmdline_prepend_end:
+ .size cmdline_prepend, (cmdline_prepend_end - cmdline_prepend)
+
+ .align 8
+ .global cmdline_tmp
+cmdline_tmp:
+ .ifnc CONFIG_CMDLINE_PREPEND,""
+ .size cmdline_tmp, COMMAND_LINE_SIZE
+ .space COMMAND_LINE_SIZE
+ .else
+ .byte 0x0
+ .endif
+cmdline_tmp_end:
+ .size cmdline_tmp, (cmdline_tmp_end - cmdline_tmp)
+
+ .align 8
+ .global cmdline_append
+ .size cmdline_append, COMMAND_LINE_SIZE
+cmdline_append:
+ .ifnc CONFIG_CMDLINE_APPEND,""
+ .ascii " "
+ .string CONFIG_CMDLINE_APPEND
+ .else
+ .byte 0x0
+ .endif
+#ifdef CONFIG_CMDLINE_EXTRA
+ .space COMMAND_LINE_SIZE - (.-cmdline_append)
+#endif /* CONFIG_CMDLINE_EXTRA */
+cmdline_append_end:
+ .size cmdline_append, (cmdline_append_end - cmdline_append)
+
diff --git a/lib/test_cmdline1.c b/lib/test_cmdline1.c
new file mode 100644
index 000000000000..ae03cf198165
--- /dev/null
+++ b/lib/test_cmdline1.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/cmdline.h>
+#include <linux/uaccess.h>
+
+#include "../tools/testing/selftests/kselftest_module.h"
+
+KSTM_MODULE_GLOBALS();
+
+char test1_prepend[] = "prepend ";
+char test1_append[] = " append";
+char test1_bootloader_args[] = "console=ttyS0 log_level=3";
+char test1_result[] = "prepend console=ttyS0 log_level=3 append";
+
+char test2_append[] = " append";
+char test2_bootloader_args[] = "console=ttyS0 log_level=3";
+char test2_result[] = "console=ttyS0 log_level=3 append";
+
+char test3_prepend[] = "prepend ";
+char test3_bootloader_args[] = "console=ttyS0 log_level=3";
+char test3_result[] = "prepend console=ttyS0 log_level=3";
+
+char test4_bootloader_args[] = "console=ttyS0 log_level=3";
+char test4_result[] = "console=ttyS0 log_level=3";
+
+char test5_prepend[] = "prepend ";
+char test5_append[] = " append";
+static char test5_bootloader_args[] =
+"00000000000000 011111111111111 0222222222222222 033333333333333 "
+"10000000000000 111111111111111 1222222222222222 133333333333333 "
+"20000000000000 211111111111111 2222222222222222 233333333333333 "
+"30000000000000 311111111111111 3222222222222222 333333333333333 "
+"40000000000000 411111111111111 4222222222222222 433333333333333 "
+"50000000000000 511111111111111 5222222222222222 533333333333333 "
+"60000000000000 611111111111111 6222222222222222 633333333333333 "
+"70000000000000 711111111111111 7222222222222222 733333333333333";
+static char test5_result[] =
+"prepend 00000000000000 011111111111111 0222222222222222 033333333333333 "
+"10000000000000 111111111111111 1222222222222222 133333333333333 "
+"20000000000000 211111111111111 2222222222222222 233333333333333 "
+"30000000000000 311111111111111 3222222222222222 333333333333333 "
+"40000000000000 411111111111111 4222222222222222 433333333333333 "
+"50000000000000 511111111111111 5222222222222222 533333333333333 "
+"60000000000000 611111111111111 6222222222222222 633333333333333 "
+"70000000000000 711111111111111 7222222222222222 7333333";
+
+char test5_boot_command_line[512];
+
+char test_tmp[COMMAND_LINE_SIZE];
+
+char test_boot_command_line[COMMAND_LINE_SIZE];
+
+static void __init selftest(void)
+{
+ bool result;
+
+ /* Normal operation */
+ strcpy(test_boot_command_line, test1_bootloader_args);
+ test_tmp[0] = '\0';
+ result = __cmdline_add_builtin(test_boot_command_line, test_tmp, test1_prepend, test1_append, COMMAND_LINE_SIZE, CMDLINE_STRLEN, CMDLINE_STRLCAT);
+
+ if (result == true && !strncmp(test_boot_command_line, test1_result, COMMAND_LINE_SIZE)) {
+ pr_info("test1 success.\n");
+ } else {
+ pr_info("test1 failed. OUTPUT BELOW:\n");
+ pr_info("\"%s\"\n", test_boot_command_line);
+ failed_tests++;
+ }
+ total_tests++;
+
+ /* Missing prepend */
+ strcpy(test_boot_command_line, test2_bootloader_args);
+ test_tmp[0] = '\0';
+ result = __cmdline_add_builtin(test_boot_command_line, test_tmp, "", test2_append, COMMAND_LINE_SIZE, CMDLINE_STRLEN, CMDLINE_STRLCAT);
+
+ if (result == true && !strncmp(test_boot_command_line, test2_result, COMMAND_LINE_SIZE)) {
+ pr_info("test2 success.\n");
+ } else {
+ pr_info("test2 failed. OUTPUT BELOW:\n");
+ pr_info("\"%s\"\n", test_boot_command_line);
+ failed_tests++;
+ }
+ total_tests++;
+
+ /* Missing append */
+ strcpy(test_boot_command_line, test3_bootloader_args);
+ test_tmp[0] = '\0';
+ result = __cmdline_add_builtin(test_boot_command_line, test_tmp, test3_prepend, "", COMMAND_LINE_SIZE, CMDLINE_STRLEN, CMDLINE_STRLCAT);
+
+ if (result == true && !strncmp(test_boot_command_line, test3_result, COMMAND_LINE_SIZE)) {
+ pr_info("test3 success.\n");
+ } else {
+ pr_info("test3 failed. OUTPUT BELOW:\n");
+ pr_info("\"%s\"\n", test_boot_command_line);
+ failed_tests++;
+ }
+ total_tests++;
+
+ /* Missing append and prepend */
+ strcpy(test_boot_command_line, test4_bootloader_args);
+ test_tmp[0] = '\0';
+ result = __cmdline_add_builtin(test_boot_command_line, test_tmp, "", "", COMMAND_LINE_SIZE, CMDLINE_STRLEN, CMDLINE_STRLCAT);
+
+ if (result == true && !strncmp(test_boot_command_line, test4_result, COMMAND_LINE_SIZE)) {
+ pr_info("test4 success.\n");
+ } else {
+ pr_info("test4 failed. OUTPUT BELOW:\n");
+ pr_info("\"%s\"\n", test_boot_command_line);
+ failed_tests++;
+ }
+ total_tests++;
+
+ /* Already full boot arguments */
+ strcpy(test5_boot_command_line, test5_bootloader_args);
+ test_tmp[0] = '\0';
+ result = __cmdline_add_builtin(test5_boot_command_line, test_tmp, test5_prepend, test5_append, 512, CMDLINE_STRLEN, CMDLINE_STRLCAT);
+
+ if (result == false && !strncmp(test5_boot_command_line, test5_result, COMMAND_LINE_SIZE)) {
+ pr_info("test5 success.\n");
+ } else {
+ pr_info("test5 failed. OUTPUT BELOW:\n");
+ pr_info("\"%s\"\n", test5_boot_command_line);
+ failed_tests++;
+ }
+ total_tests++;
+}
+
+KSTM_MODULE_LOADERS(cmdline_test);
+MODULE_AUTHOR("Daniel Walker <danielwa@cisco.com>");
+MODULE_LICENSE("GPL");
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 2/8] scripts: insert-sys-cert: add command line insert capability
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
2021-04-16 4:09 ` [PATCH 1/8] CMDLINE: add generic builtin command line Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 3/8] scripts: insert-sys-cert: change name to insert-symbol Daniel Walker
` (6 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev
Cc: xe-linux-external, linux-kernel
This adds changes to the insert-sys-cert tool to allow updating
the cmdline_prepend and cmdline_append symbols in addition to
adding certificates.
Updating the cmdline symbols was tested on a PVH virtual machine
with a vmlinux, and with a bzImage which was repackaged on x86.
This commit intentionally keeps the tool filename the same to allow
the changes to be seen more easily. The next commit will change
the name of the tool.
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
scripts/insert-sys-cert.c | 241 +++++++++++++++++++++++++++-----------
1 file changed, 170 insertions(+), 71 deletions(-)
diff --git a/scripts/insert-sys-cert.c b/scripts/insert-sys-cert.c
index 8902836c2342..77d3306cfbfb 100644
--- a/scripts/insert-sys-cert.c
+++ b/scripts/insert-sys-cert.c
@@ -30,6 +30,9 @@
#define USED_SYM "system_extra_cert_used"
#define LSIZE_SYM "system_certificate_list_size"
+#define CMDLINE_APPEND "cmdline_append"
+#define CMDLINE_PREPEND "cmdline_prepend"
+
#define info(format, args...) fprintf(stderr, "INFO: " format, ## args)
#define warn(format, args...) fprintf(stdout, "WARNING: " format, ## args)
#define err(format, args...) fprintf(stderr, "ERROR: " format, ## args)
@@ -267,95 +270,46 @@ static void print_sym(Elf_Ehdr *hdr, struct sym *s)
static void print_usage(char *e)
{
- printf("Usage %s [-s <System.map>] -b <vmlinux> -c <certfile>\n", e);
+ printf("Usage %s [-s <System.map>] -b <vmlinux> [ -c <certfile> | -p <command line prepend> | -a <command line append> ]-\n", e);
}
-int main(int argc, char **argv)
+static char *cmdline_prepend, *cmdline_append;
+static char *system_map_file;
+static char *cert_file;
+static char *cli_name;
+
+static int insert_certificate(Elf_Ehdr *hdr)
{
- char *system_map_file = NULL;
- char *vmlinux_file = NULL;
- char *cert_file = NULL;
- int vmlinux_size;
+ struct sym cert_sym, lsize_sym, used_sym;
+ Elf_Shdr *symtab = NULL;
+ unsigned long *lsize;
+ FILE *system_map;
int cert_size;
- Elf_Ehdr *hdr;
char *cert;
- FILE *system_map;
- unsigned long *lsize;
int *used;
- int opt;
- Elf_Shdr *symtab = NULL;
- struct sym cert_sym, lsize_sym, used_sym;
-
- while ((opt = getopt(argc, argv, "b:c:s:")) != -1) {
- switch (opt) {
- case 's':
- system_map_file = optarg;
- break;
- case 'b':
- vmlinux_file = optarg;
- break;
- case 'c':
- cert_file = optarg;
- break;
- default:
- break;
- }
- }
- if (!vmlinux_file || !cert_file) {
- print_usage(argv[0]);
- exit(EXIT_FAILURE);
+ if (!cert_file) {
+ print_usage(cli_name);
+ return EXIT_FAILURE;
}
cert = read_file(cert_file, &cert_size);
if (!cert)
- exit(EXIT_FAILURE);
-
- hdr = map_file(vmlinux_file, &vmlinux_size);
- if (!hdr)
- exit(EXIT_FAILURE);
-
- if (vmlinux_size < sizeof(*hdr)) {
- err("Invalid ELF file.\n");
- exit(EXIT_FAILURE);
- }
-
- if ((hdr->e_ident[EI_MAG0] != ELFMAG0) ||
- (hdr->e_ident[EI_MAG1] != ELFMAG1) ||
- (hdr->e_ident[EI_MAG2] != ELFMAG2) ||
- (hdr->e_ident[EI_MAG3] != ELFMAG3)) {
- err("Invalid ELF magic.\n");
- exit(EXIT_FAILURE);
- }
-
- if (hdr->e_ident[EI_CLASS] != CURRENT_ELFCLASS) {
- err("ELF class mismatch.\n");
- exit(EXIT_FAILURE);
- }
-
- if (hdr->e_ident[EI_DATA] != endianness()) {
- err("ELF endian mismatch.\n");
- exit(EXIT_FAILURE);
- }
-
- if (hdr->e_shoff > vmlinux_size) {
- err("Could not find section header.\n");
- exit(EXIT_FAILURE);
- }
+ return EXIT_FAILURE;
symtab = get_symbol_table(hdr);
if (!symtab) {
warn("Could not find the symbol table.\n");
if (!system_map_file) {
err("Please provide a System.map file.\n");
- print_usage(argv[0]);
- exit(EXIT_FAILURE);
+ print_usage(cli_name);
+ return EXIT_FAILURE;
}
system_map = fopen(system_map_file, "r");
if (!system_map) {
perror(system_map_file);
- exit(EXIT_FAILURE);
+ return EXIT_FAILURE;
}
get_symbol_from_map(hdr, system_map, CERT_SYM, &cert_sym);
get_symbol_from_map(hdr, system_map, USED_SYM, &used_sym);
@@ -371,7 +325,7 @@ int main(int argc, char **argv)
}
if (!cert_sym.offset || !lsize_sym.offset || !used_sym.offset)
- exit(EXIT_FAILURE);
+ return EXIT_FAILURE;
print_sym(hdr, &cert_sym);
print_sym(hdr, &used_sym);
@@ -382,14 +336,14 @@ int main(int argc, char **argv)
if (cert_sym.size < cert_size) {
err("Certificate is larger than the reserved area!\n");
- exit(EXIT_FAILURE);
+ return EXIT_FAILURE;
}
/* If the existing cert is the same, don't overwrite */
if (cert_size == *used &&
strncmp(cert_sym.content, cert, cert_size) == 0) {
warn("Certificate was already inserted.\n");
- exit(EXIT_SUCCESS);
+ return EXIT_SUCCESS;
}
if (*used > 0)
@@ -406,5 +360,150 @@ int main(int argc, char **argv)
cert_sym.address);
info("Used %d bytes out of %d bytes reserved.\n", *used,
cert_sym.size);
- exit(EXIT_SUCCESS);
+ return EXIT_SUCCESS;
+}
+
+static int insert_cmdline(Elf_Ehdr *hdr)
+{
+ struct sym cmdline_prepend_sym, cmdline_append_sym;
+ Elf_Shdr *symtab = NULL;
+ FILE *system_map;
+
+ symtab = get_symbol_table(hdr);
+ if (!symtab) {
+ warn("Could not find the symbol table.\n");
+ if (!system_map_file) {
+ err("Please provide a System.map file.\n");
+ print_usage(cli_name);
+ return EXIT_FAILURE;
+ }
+
+ system_map = fopen(system_map_file, "r");
+ if (!system_map) {
+ perror(system_map_file);
+ return EXIT_FAILURE;
+ }
+ get_symbol_from_map(hdr, system_map, CMDLINE_PREPEND, &cmdline_prepend_sym);
+ get_symbol_from_map(hdr, system_map, CMDLINE_APPEND, &cmdline_append_sym);
+ } else {
+ info("Symbol table found.\n");
+ if (system_map_file)
+ warn("System.map is ignored.\n");
+ get_symbol_from_table(hdr, symtab, CMDLINE_PREPEND, &cmdline_prepend_sym);
+ get_symbol_from_table(hdr, symtab, CMDLINE_APPEND, &cmdline_append_sym);
+ }
+
+ print_sym(hdr, &cmdline_prepend_sym);
+ print_sym(hdr, &cmdline_append_sym);
+
+
+ if (cmdline_prepend) {
+ if ((strlen(cmdline_prepend) + 1) > cmdline_prepend_sym.size) {
+ err("cmdline prepend is larger than the reserved area!\n");
+ return EXIT_FAILURE;
+ }
+
+ memcpy(cmdline_prepend_sym.content, cmdline_prepend, strlen(cmdline_prepend) + 1);
+ if ((strlen(cmdline_prepend) + 1) < cmdline_prepend_sym.size)
+ memset(cmdline_prepend_sym.content + strlen(cmdline_prepend) + 1,
+ 0, cmdline_prepend_sym.size - (strlen(cmdline_prepend) + 1));
+
+ info("Inserted cmdline prepend of \"%s\" into vmlinux.\n", cmdline_prepend);
+
+ }
+ if (cmdline_append) {
+ if ((strlen(cmdline_append) + 1) > cmdline_append_sym.size) {
+ err("cmdline append is larger than the reserved area!\n");
+ return EXIT_FAILURE;
+ }
+
+ memcpy(cmdline_append_sym.content, cmdline_append, strlen(cmdline_append) + 1);
+ if ((strlen(cmdline_append) + 1) < cmdline_append_sym.size)
+ memset(cmdline_append_sym.content + strlen(cmdline_append) + 1,
+ 0, cmdline_append_sym.size - (strlen(cmdline_append) + 1));
+
+ info("Inserted cmdline append of \"%s\" into vmlinux.\n", cmdline_append);
+
+ }
+ return EXIT_SUCCESS;
+}
+
+int main(int argc, char **argv)
+{
+ char *vmlinux_file = NULL;
+ int vmlinux_size;
+ Elf_Ehdr *hdr;
+ int opt;
+ int ret = EXIT_SUCCESS;
+
+ while ((opt = getopt(argc, argv, "b:c:s:p:a:")) != -1) {
+ switch (opt) {
+ case 's':
+ system_map_file = optarg;
+ break;
+ case 'b':
+ vmlinux_file = optarg;
+ break;
+ case 'c':
+ cert_file = optarg;
+ break;
+ case 'p':
+ cmdline_prepend = optarg;
+ break;
+ case 'a':
+ cmdline_append = optarg;
+ break;
+ default:
+ break;
+ }
+ }
+
+ cli_name = argv[0];
+
+ if (!vmlinux_file) {
+ print_usage(cli_name);
+ exit(EXIT_FAILURE);
+ }
+
+ hdr = map_file(vmlinux_file, &vmlinux_size);
+ if (!hdr)
+ exit(EXIT_FAILURE);
+
+ if (vmlinux_size < sizeof(*hdr)) {
+ err("Invalid ELF file.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if ((hdr->e_ident[EI_MAG0] != ELFMAG0) ||
+ (hdr->e_ident[EI_MAG1] != ELFMAG1) ||
+ (hdr->e_ident[EI_MAG2] != ELFMAG2) ||
+ (hdr->e_ident[EI_MAG3] != ELFMAG3)) {
+ err("Invalid ELF magic.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (hdr->e_ident[EI_CLASS] != CURRENT_ELFCLASS) {
+ err("ELF class mismatch.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (hdr->e_ident[EI_DATA] != endianness()) {
+ err("ELF endian mismatch.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (hdr->e_shoff > vmlinux_size) {
+ err("Could not find section header.\n");
+ exit(EXIT_FAILURE);
+ }
+
+ if (cert_file) {
+ ret = insert_certificate(hdr);
+ printf("%s\n", cert_file);
+ }
+
+ if (cmdline_append || cmdline_prepend)
+ ret = insert_cmdline(hdr);
+
+ exit(ret);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 3/8] scripts: insert-sys-cert: change name to insert-symbol
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
2021-04-16 4:09 ` [PATCH 1/8] CMDLINE: add generic builtin command line Daniel Walker
2021-04-16 4:09 ` [PATCH 2/8] scripts: insert-sys-cert: add command line insert capability Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 4/8] CMDLINE: mips: convert to generic builtin command line Daniel Walker
` (5 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, Masahiro Yamada,
Michal Marek
Cc: xe-linux-external, linux-kbuild, linux-kernel
Since the tool is used to update the command line and/or
to update the certificates, I think it makes sense to
changes the name of this tool.
Update the name of the tool to better reflect it's new use.
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
scripts/Makefile | 2 +-
scripts/{insert-sys-cert.c => insert-symbol.c} | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
rename scripts/{insert-sys-cert.c => insert-symbol.c} (99%)
diff --git a/scripts/Makefile b/scripts/Makefile
index c36106bce80e..ed6b9f8f91fa 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -13,7 +13,7 @@ hostprogs-always-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable
hostprogs-always-$(CONFIG_ASN1) += asn1_compiler
hostprogs-always-$(CONFIG_MODULE_SIG_FORMAT) += sign-file
hostprogs-always-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert
-hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert
+hostprogs-always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-symbol
HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
diff --git a/scripts/insert-sys-cert.c b/scripts/insert-symbol.c
similarity index 99%
rename from scripts/insert-sys-cert.c
rename to scripts/insert-symbol.c
index 77d3306cfbfb..6866e3a84974 100644
--- a/scripts/insert-sys-cert.c
+++ b/scripts/insert-symbol.c
@@ -7,7 +7,7 @@
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
- * Usage: insert-sys-cert [-s <System.map> -b <vmlinux> -c <certfile>
+ * Usage: insert-symbol [-s <System.map> -b <vmlinux> -c <certfile>
*/
#define _GNU_SOURCE
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 4/8] CMDLINE: mips: convert to generic builtin command line
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
` (2 preceding siblings ...)
2021-04-16 4:09 ` [PATCH 3/8] scripts: insert-sys-cert: change name to insert-symbol Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 5/8] drivers: firmware: efi: libstub: enable generic commandline Daniel Walker
` (4 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev,
Thomas Bogendoerfer, Florian Fainelli, bcm-kernel-feedback-list
Cc: xe-linux-external, Ruslan Ruslichenko, Ruslan Bilovol,
linux-kernel, linux-arm-kernel
This updates the mips code to use the CONFIG_GENERIC_CMDLINE
option.
This deletes the option for MIPS_CMDLINE_BUILTIN_EXTEND
and replaces the functionality with generic code.
Of note, the pic32 has some strange handling of the current built
in command line. It was converted to use the static variant which
can't be updated after compilation. It should eventually be updated
to use to append and prepend symbols.
This includes a scripted mass convert of the config files to use
the new generic cmdline. There is a bit of a trim effect here.
It would seems that some of the config haven't been trimmed in
a while.
The script used is as follows,
if [[ -z "$1" || -z "$2" ]]; then
echo "Two arguments are needed."
exit 1
fi
mkdir $1
cp $2 $1/.config
sed -i 's/CONFIG_CMDLINE=/CONFIG_CMDLINE_BOOL=y\nCONFIG_CMDLINE_PREPEND=/g' $1/.config
make ARCH=$1 O=$1 olddefconfig
make ARCH=$1 O=$1 savedefconfig
cp $1/defconfig $2
rm -Rf $1
Cc: xe-linux-external@cisco.com
Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com>
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
arch/mips/Kconfig | 4 +--
arch/mips/Kconfig.debug | 44 -----------------------
arch/mips/configs/ar7_defconfig | 9 ++---
arch/mips/configs/bcm47xx_defconfig | 8 ++---
arch/mips/configs/bcm63xx_defconfig | 15 +++-----
arch/mips/configs/bmips_be_defconfig | 11 +++---
arch/mips/configs/bmips_stb_defconfig | 11 +++---
arch/mips/configs/capcella_defconfig | 11 ++----
arch/mips/configs/ci20_defconfig | 10 +++---
arch/mips/configs/cu1000-neo_defconfig | 10 +++---
arch/mips/configs/cu1830-neo_defconfig | 10 +++---
arch/mips/configs/e55_defconfig | 4 +--
arch/mips/configs/generic_defconfig | 6 ++--
arch/mips/configs/gpr_defconfig | 18 ++--------
arch/mips/configs/loongson3_defconfig | 13 ++-----
arch/mips/configs/mpc30x_defconfig | 7 ++--
arch/mips/configs/tb0219_defconfig | 7 ++--
arch/mips/configs/tb0226_defconfig | 7 ++--
arch/mips/configs/tb0287_defconfig | 7 ++--
arch/mips/configs/workpad_defconfig | 11 +++---
arch/mips/include/asm/setup.h | 2 ++
arch/mips/kernel/relocate.c | 17 +++++++--
arch/mips/kernel/setup.c | 36 +++----------------
arch/mips/pic32/pic32mzda/early_console.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 3 +-
25 files changed, 78 insertions(+), 205 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d89efba3d8a4..0e753894d28d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
@@ -3212,9 +3213,6 @@ choice
config MIPS_CMDLINE_FROM_BOOTLOADER
bool "Bootloader kernel arguments if available"
- config MIPS_CMDLINE_BUILTIN_EXTEND
- depends on CMDLINE_BOOL
- bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
endmenu
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 7a8d94cdd493..b5a099c74eb6 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -30,50 +30,6 @@ config EARLY_PRINTK_8250
config USE_GENERIC_EARLY_PRINTK_8250
bool
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- For most systems, it is firmware or second stage bootloader that
- by default specifies the kernel command line options. However,
- it might be necessary or advantageous to either override the
- default kernel command line or add a few extra options to it.
- For such cases, this option allows you to hardcode your own
- command line options directly into the kernel. For that, you
- should choose 'Y' here, and fill in the extra boot arguments
- in CONFIG_CMDLINE.
-
- The built-in options will be concatenated to the default command
- line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
- command line will be ignored and replaced by the built-in string.
-
- Most MIPS systems will normally expect 'N' here and rely upon
- the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, and for the cases
- when you want to add some extra options to the command line or ignore
- the default command line, you can supply some command-line options at
- build time by entering them here. In other cases you can specify
- kernel args so that you don't have to set them up in board prom
- initialization routines.
-
- For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
- options.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firmware arguments"
- depends on CMDLINE_BOOL
- help
- By setting this option to 'Y' you will have your kernel ignore
- command line arguments from firmware or second stage bootloader.
- Instead, the built-in command line will be used exclusively.
-
- Normally, you will choose 'N' here.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index cf9c6329b807..c09470aa672f 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -12,6 +12,8 @@ CONFIG_EXPERT=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="rootfstype=squashfs,jffs2"
CONFIG_AR7=y
CONFIG_HZ_100=y
CONFIG_KEXEC=y
@@ -32,9 +34,6 @@ CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_MROUTE=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
@@ -43,7 +42,6 @@ CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
-# CONFIG_BRIDGE_NETFILTER is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_FTP=m
@@ -117,8 +115,5 @@ CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_SQUASHFS=y
# CONFIG_CRYPTO_HW is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 91ce75edbfb4..69a965bb2dd9 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -4,8 +4,9 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyS0,115200"
CONFIG_BCM47XX=y
-CONFIG_PCI=y
# CONFIG_SUSPEND is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@@ -32,6 +33,7 @@ CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_HAMRADIO=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
+CONFIG_PCI=y
CONFIG_MTD=y
CONFIG_MTD_BCM47XX_PARTS=y
CONFIG_MTD_BLOCK=y
@@ -75,7 +77,5 @@ CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 861f680184b9..6791e48b2d7d 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -11,27 +11,26 @@ CONFIG_EXPERT=y
# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyS0,115200"
CONFIG_BCM63XX=y
CONFIG_BCM63XX_CPU_6338=y
CONFIG_BCM63XX_CPU_6345=y
CONFIG_BCM63XX_CPU_6348=y
CONFIG_BCM63XX_CPU_6358=y
# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_BCM63XX=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_MAC80211=y
+CONFIG_PCI=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_BCM63XX=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
@@ -50,8 +49,6 @@ CONFIG_B43=y
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_ARB is not set
@@ -65,5 +62,3 @@ CONFIG_PROC_KCORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index 032bb51defe8..ae1c4adf8d98 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -5,21 +5,20 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="earlycon"
CONFIG_BMIPS_GENERIC=y
CONFIG_HIGHMEM=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
-# CONFIG_SECCOMP is not set
CONFIG_MIPS_O32_FP64_SUPPORT=y
+# CONFIG_SECCOMP is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
@@ -73,7 +72,5 @@ CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_CRYPTO_HW is not set
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon"
+CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index 625bd2d7e685..cb3b114b10d0 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -5,12 +5,13 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="earlycon"
CONFIG_BMIPS_GENERIC=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_HIGHMEM=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
-# CONFIG_SECCOMP is not set
CONFIG_MIPS_O32_FP64_SUPPORT=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
@@ -20,15 +21,13 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
CONFIG_BMIPS_CPUFREQ=y
+# CONFIG_SECCOMP is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
@@ -84,7 +83,5 @@ CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_CRYPTO_HW is not set
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon"
+CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 7bf8971af53b..a8b87cccfade 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -2,6 +2,8 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="mem=32M console=ttyVR0,38400"
CONFIG_MACH_VR41XX=y
CONFIG_ZAO_CAPCELLA=y
CONFIG_MODULES=y
@@ -20,9 +22,6 @@ CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
@@ -73,19 +72,13 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb066834..28e72ae87ca9 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -22,12 +22,14 @@ CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="earlycon console=ttyS4,115200 clk_ignore_unused"
CONFIG_MACH_INGENIC_SOC=y
CONFIG_JZ4780_CI20=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
# CONFIG_SUSPEND is not set
+# CONFIG_SECCOMP is not set
CONFIG_MODULES=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
@@ -99,12 +101,12 @@ CONFIG_IR_GPIO_CIR=m
CONFIG_IR_GPIO_TX=m
CONFIG_MEDIA_SUPPORT=m
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC2=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CH341=y
+CONFIG_JZ4770_PHY=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_JZ4740=y
@@ -138,7 +140,6 @@ CONFIG_JZ4780_NEMC=y
CONFIG_PWM=y
CONFIG_PWM_JZ4740=m
CONFIG_JZ4780_EFUSE=y
-CONFIG_JZ4770_PHY=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS_FS=y
@@ -151,7 +152,6 @@ CONFIG_CONFIGFS_FS=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
@@ -203,5 +203,3 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index 9d75f5b77d5d..e54e708783d9 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -19,12 +19,14 @@ CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="earlycon clk_ignore_unused"
CONFIG_MACH_INGENIC_SOC=y
CONFIG_X1000_CU1000_NEO=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
# CONFIG_SUSPEND is not set
+# CONFIG_SECCOMP is not set
CONFIG_MODULES=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
@@ -67,12 +69,12 @@ CONFIG_SENSORS_ADS7828=m
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC2=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CH341=y
+CONFIG_JZ4770_PHY=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_JZ4740=y
@@ -87,7 +89,6 @@ CONFIG_DMA_JZ4780=y
# CONFIG_INGENIC_TIMER is not set
CONFIG_INGENIC_SYSOST=y
# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_JZ4770_PHY=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS_FS=y
@@ -98,7 +99,6 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_NFS_FS=y
-CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
@@ -123,5 +123,3 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
index 29decd0003c6..06267749acc9 100644
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -19,12 +19,14 @@ CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="earlycon clk_ignore_unused"
CONFIG_MACH_INGENIC_SOC=y
CONFIG_X1830_CU1830_NEO=y
CONFIG_HIGHMEM=y
CONFIG_HZ_100=y
-# CONFIG_SECCOMP is not set
# CONFIG_SUSPEND is not set
+# CONFIG_SECCOMP is not set
CONFIG_MODULES=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_COMPACTION is not set
@@ -70,12 +72,12 @@ CONFIG_SENSORS_ADS7828=m
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID is not set
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC2=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CH341=y
+CONFIG_JZ4770_PHY=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_JZ4740=y
@@ -90,7 +92,6 @@ CONFIG_DMA_JZ4780=y
# CONFIG_INGENIC_TIMER is not set
CONFIG_INGENIC_SYSOST=y
# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_JZ4770_PHY=y
CONFIG_EXT4_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_AUTOFS_FS=y
@@ -101,7 +102,6 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_NFS_FS=y
-CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
@@ -126,5 +126,3 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index fd82b858a8f0..19769d645fcb 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -2,6 +2,8 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
CONFIG_MACH_VR41XX=y
CONFIG_CASIO_E55=y
CONFIG_MODULES=y
@@ -33,5 +35,3 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
index 714169e411cf..665ae8d63ef3 100644
--- a/arch/mips/configs/generic_defconfig
+++ b/arch/mips/configs/generic_defconfig
@@ -3,7 +3,6 @@ CONFIG_NO_HZ_IDLE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
CONFIG_BLK_CGROUP=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
@@ -21,6 +20,8 @@ CONFIG_USERFAULTFD=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="earlycon"
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_CPS=y
CONFIG_HIGHMEM=y
@@ -52,7 +53,6 @@ CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_EZKEY=y
CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_MIPS_PLATFORM_DEVICES is not set
@@ -88,5 +88,3 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 5cb91509bb7c..cb642d14dd93 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -10,9 +10,10 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
CONFIG_MIPS_ALCHEMY=y
CONFIG_MIPS_GPR=y
-CONFIG_PCI=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
@@ -29,9 +30,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
@@ -49,7 +47,6 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
@@ -151,6 +148,7 @@ CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
CONFIG_CFG80211=y
CONFIG_MAC80211=y
+CONFIG_PCI=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
@@ -225,9 +223,6 @@ CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_FARSYNC=m
-CONFIG_DSCC4=m
-CONFIG_DSCC4_PCISYNC=y
-CONFIG_DSCC4_PCI_RST=y
CONFIG_LAPBETHER=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
@@ -247,7 +242,6 @@ CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SSB=m
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_VGA_ARB is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_USB_HID=m
@@ -295,16 +289,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 0e79f81217bc..f3b8c64ea379 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -13,7 +13,6 @@ CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_FREEZER=y
@@ -28,6 +27,8 @@ CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="ieee754=relaxed"
CONFIG_MACH_LOONGSON64=y
CONFIG_CPU_HAS_MSA=y
CONFIG_NR_CPUS=16
@@ -39,7 +40,6 @@ CONFIG_MIPS32_O32=y
CONFIG_MIPS32_N32=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
-CONFIG_KVM_MIPS_VZ=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
@@ -204,7 +204,6 @@ CONFIG_VIRTIO_NET=m
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_E1000=y
CONFIG_E1000E=y
@@ -246,7 +245,6 @@ CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_ATH9K=m
CONFIG_HOSTAP=m
-CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
@@ -278,7 +276,6 @@ CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_W83627HF=m
CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_DRM=y
@@ -388,18 +385,14 @@ CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_PRINTK_TIME=y
@@ -408,5 +401,3 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ieee754=relaxed"
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index d4e038802510..925e71b9a9a7 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -3,6 +3,8 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
CONFIG_MACH_VR41XX=y
CONFIG_VICTOR_MPC30X=y
CONFIG_MODULES=y
@@ -18,9 +20,6 @@ CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_CONNECTOR=m
@@ -49,5 +48,3 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_CONFIGFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 6547f84750b5..1d1bacd3eb2b 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -2,6 +2,8 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
CONFIG_MACH_VR41XX=y
CONFIG_TANBAC_TB0219=y
CONFIG_MODULES=y
@@ -23,9 +25,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_BLK_DEV_LOOP=m
@@ -73,5 +72,3 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 7e099f7c2286..072ac9fa92a7 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -2,6 +2,8 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="cca=3 mem=32M console=ttyVR0,115200"
CONFIG_MACH_VR41XX=y
CONFIG_TANBAC_TB0226=y
CONFIG_MODULES=y
@@ -21,9 +23,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_BLK_DEV_LOOP=m
@@ -68,5 +67,3 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 0d881dd862c0..30b1b84fe46b 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -2,6 +2,8 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
CONFIG_MACH_VR41XX=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@@ -22,9 +24,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
@@ -81,5 +80,3 @@ CONFIG_NFSD_V3=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 891a5f77305d..81bf360060a2 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -2,10 +2,10 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
CONFIG_SLAB=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_PREPEND="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
CONFIG_MACH_VR41XX=y
CONFIG_IBM_WORKPAD=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_VRC4171=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
@@ -20,11 +20,10 @@ CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_VRC4171=y
CONFIG_BLK_DEV_RAM=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECS=m
@@ -61,5 +60,3 @@ CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h
index bb36a400203d..085f0b503f07 100644
--- a/arch/mips/include/asm/setup.h
+++ b/arch/mips/include/asm/setup.h
@@ -5,6 +5,7 @@
#include <linux/types.h>
#include <uapi/asm/setup.h>
+#ifndef __ASSEMBLY__
extern void prom_putchar(char);
extern void setup_early_printk(void);
@@ -27,5 +28,6 @@ extern unsigned long ebase;
extern unsigned int hwrena;
extern void per_cpu_trap_init(bool);
extern void cpu_cache_init(void);
+#endif
#endif /* __SETUP_H */
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 499a5357c09f..67ad1c481417 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -22,6 +22,7 @@
#include <linux/start_kernel.h>
#include <linux/string.h>
#include <linux/printk.h>
+#include <linux/cmdline.h>
#define RELOCATED(x) ((void *)((long)x + offset))
@@ -246,16 +247,26 @@ static inline __init bool kaslr_disabled(void)
char *str;
#if defined(CONFIG_CMDLINE_BOOL)
- const char *builtin_cmdline = CONFIG_CMDLINE;
+ char *builtin_cmdline = CMDLINE_PREPEND;
str = strstr(builtin_cmdline, "nokaslr");
if (str == builtin_cmdline ||
(str > builtin_cmdline && *(str - 1) == ' '))
return true;
#endif
- str = strstr(arcs_cmdline, "nokaslr");
- if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' '))
+ if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
+ str = strstr(arcs_cmdline, "nokaslr");
+ if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' '))
+ return true;
+ }
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ builtin_cmdline = CMDLINE_APPEND;
+ str = strstr(builtin_cmdline, "nokaslr");
+ if (str == builtin_cmdline ||
+ (str > builtin_cmdline && *(str - 1) == ' '))
return true;
+#endif
return false;
}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 23a140327a0b..bbe1b34339ab 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -23,6 +23,7 @@
#include <linux/debugfs.h>
#include <linux/kexec.h>
#include <linux/sizes.h>
+#include <linux/cmdline.h>
#include <linux/device.h>
#include <linux/dma-map-ops.h>
#include <linux/decompress/generic.h>
@@ -66,12 +67,6 @@ EXPORT_SYMBOL(mips_machtype);
static char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE;
-#else
-static const char builtin_cmdline[] __initconst = "";
-#endif
-
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
@@ -546,27 +541,7 @@ static void __init bootcmdline_init(void)
{
bool dt_bootargs = false;
- /*
- * If CMDLINE_OVERRIDE is enabled then initializing the command line is
- * trivial - we simply use the built-in command line unconditionally &
- * unmodified.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- return;
- }
-
- /*
- * If the user specified a built-in command line &
- * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- * prepended to arguments from the bootloader or DT so we'll copy them
- * to the start of boot_command_line here. Otherwise, empty
- * boot_command_line to undo anything early_init_dt_scan_chosen() did.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- else
- boot_command_line[0] = 0;
+ boot_command_line[0] = 0;
#ifdef CONFIG_OF_EARLY_FLATTREE
/*
@@ -589,12 +564,9 @@ static void __init bootcmdline_init(void)
bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
/*
- * If the user specified a built-in command line & we didn't already
- * prepend it, we append it to boot_command_line here.
+ * Use the generic system for builtin prepend and append.
*/
- if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
- !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
+ cmdline_add_builtin(boot_command_line);
}
/*
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
index 25372e62783b..213e318d7ad4 100644
--- a/arch/mips/pic32/pic32mzda/early_console.c
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -76,7 +76,7 @@ static char * __init pic32_getcmdline(void)
* command line setup if using CONFIG_CMDLINE_BOOL.
*/
#ifdef CONFIG_CMDLINE_OVERRIDE
- return CONFIG_CMDLINE;
+ return CMDLINE_STATIC_PREPEND " " CMDLINE_STATIC_APPEND;
#else
return fw_getcmdline();
#endif
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 764f2d022fae..9a3328ba8ea1 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -9,6 +9,7 @@
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/platform_data/sdhci-pic32.h>
+#include <linux/cmdline.h>
#include <asm/fw/fw.h>
#include <asm/mips-boards/generic.h>
@@ -41,7 +42,7 @@ void __init plat_mem_setup(void)
pr_info(" boot_command_line: %s\n", boot_command_line);
pr_info(" arcs_cmdline : %s\n", arcs_cmdline);
#ifdef CONFIG_CMDLINE_BOOL
- pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE);
+ pr_info(" builtin_cmdline : %s\n", CMDLINE_STATIC_PREPEND " " CMDLINE_STATIC_APPEND);
#endif
if (dtb != __dtb_start)
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 5/8] drivers: firmware: efi: libstub: enable generic commandline
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
` (3 preceding siblings ...)
2021-04-16 4:09 ` [PATCH 4/8] CMDLINE: mips: convert to generic builtin command line Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 6/8] CMDLINE: x86: convert to generic builtin command line Daniel Walker
` (3 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev
Cc: xe-linux-external, Ard Biesheuvel, linux-efi, linux-kernel
This adds code to handle the generic command line changes.
The efi code appears that it doesn't benefit as much from this design
as it could.
For example, if you had a prepend command line with "nokaslr" then
you might be helpful to re-enable it in the boot loader or dts,
but there appears to be no way to re-enable kaslr or some of the
other options.
The efi command line handling is incorrect. x86 and arm have an append
system however the efi code prepends the command line.
For example, you could have a non-upgradable bios which sends
efi=disable_early_pci_dma
This hypothetically could have been set because early pci dma caused
issues on early versions of the product.
Then later the early pci dma was made to work and the company desired
to start using it. To override the bios you could set the CONFIG_CMDLINE
to,
efi=no_disable_early_pci_dma
then parsing would normally start with the bios command line, then move
to the CONFIG_CMDLINE and you would end up with early pci dma turned on.
however, current efi code keeps early pci dma off because the bios
arguments always override the built in.
Per my reading this is different from the main body of x86, arm, and
arm64.
The generic command line provides both append and prepend, so it
alleviates this issue if it's used. However not all architectures use
it.
It would be desirable to allow the efi stub to have it's builtin command
line to be modified after compile, but I don't see a feasible way to do
that currently.
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
.../firmware/efi/libstub/efi-stub-helper.c | 29 +++++++++++++++++++
drivers/firmware/efi/libstub/efi-stub.c | 9 ++++++
drivers/firmware/efi/libstub/efistub.h | 1 +
drivers/firmware/efi/libstub/x86-stub.c | 13 +++++++--
4 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index aa8da0a49829..16318f55f187 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -13,6 +13,7 @@
#include <linux/efi.h>
#include <linux/kernel.h>
#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <linux/cmdline.h>
#include <asm/efi.h>
#include <asm/setup.h>
@@ -172,6 +173,34 @@ int efi_printk(const char *fmt, ...)
return printed;
}
+/**
+ * efi_handle_cmdline() - handle adding in building parts of the command line
+ * @cmdline: kernel command line
+ *
+ * Add in the generic parts of the commandline and start the parsing of the
+ * command line.
+ *
+ * Return: status code
+ */
+efi_status_t efi_handle_cmdline(char const *cmdline)
+{
+ efi_status_t status = EFI_SUCCESS;
+
+ if (sizeof(CMDLINE_STATIC_PREPEND) > 1)
+ status |= efi_parse_options(CMDLINE_STATIC_PREPEND);
+
+ if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE))
+ status |= efi_parse_options(cmdline);
+
+ if (sizeof(CMDLINE_STATIC_APPEND) > 1)
+ status |= efi_parse_options(CMDLINE_STATIC_APPEND);
+
+ if (status != EFI_SUCCESS)
+ efi_err("Failed to parse options\n");
+
+ return status;
+}
+
/**
* efi_parse_options() - Parse EFI command line options
* @cmdline: kernel command line
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index 26e69788f27a..baa69b24cfdd 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -172,6 +172,14 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
goto fail;
}
+#ifdef CONFIG_GENERIC_CMDLINE
+ status = efi_handle_cmdline(cmdline_ptr);
+ if (status != EFI_SUCCESS) {
+ goto fail_free_cmdline;
+ }
+#endif
+
+#ifdef CONFIG_CMDLINE
if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
cmdline_size == 0) {
@@ -189,6 +197,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
goto fail_free_cmdline;
}
}
+#endif
efi_info("Booting Linux Kernel...\n");
diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index cde0a2ef507d..07c7f9fdfffc 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -800,6 +800,7 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
unsigned long alignment,
unsigned long min_addr);
+efi_status_t efi_handle_cmdline(char const *cmdline);
efi_status_t efi_parse_options(char const *cmdline);
void efi_parse_option_graphics(char *option);
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..30ad8fb7122d 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -673,6 +673,8 @@ unsigned long efi_main(efi_handle_t handle,
unsigned long bzimage_addr = (unsigned long)startup_32;
unsigned long buffer_start, buffer_end;
struct setup_header *hdr = &boot_params->hdr;
+ unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+ ((u64)boot_params->ext_cmd_line_ptr << 32));
efi_status_t status;
efi_system_table = sys_table_arg;
@@ -735,6 +737,14 @@ unsigned long efi_main(efi_handle_t handle,
image_offset = 0;
}
+#ifdef CONFIG_GENERIC_CMDLINE
+ status = efi_handle_cmdline((char *)cmdline_paddr);
+ if (status != EFI_SUCCESS) {
+ efi_err("Failed to parse options\n");
+ goto fail;
+ }
+#else /* CONFIG_GENERIC_CMDLINE */
+
#ifdef CONFIG_CMDLINE_BOOL
status = efi_parse_options(CONFIG_CMDLINE);
if (status != EFI_SUCCESS) {
@@ -743,8 +753,6 @@ unsigned long efi_main(efi_handle_t handle,
}
#endif
if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
- ((u64)boot_params->ext_cmd_line_ptr << 32));
status = efi_parse_options((char *)cmdline_paddr);
if (status != EFI_SUCCESS) {
efi_err("Failed to parse options\n");
@@ -752,6 +760,7 @@ unsigned long efi_main(efi_handle_t handle,
}
}
+#endif
/*
* At this point, an initrd may already have been loaded by the
* bootloader and passed via bootparams. We permit an initrd loaded
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 6/8] CMDLINE: x86: convert to generic builtin command line
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
` (4 preceding siblings ...)
2021-04-16 4:09 ` [PATCH 5/8] drivers: firmware: efi: libstub: enable generic commandline Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 7/8] of: allow sending a NULL value to early_init_dt_scan_chosen Daniel Walker
` (2 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H. Peter Anvin
Cc: xe-linux-external, Ruslan Ruslichenko, Ruslan Bilovol, linux-kernel
This updates the x86 code to use the CONFIG_GENERIC_CMDLINE
option.
Cc: xe-linux-external@cisco.com
Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
arch/x86/Kconfig | 44 +----------------------------------------
arch/x86/kernel/setup.c | 18 ++---------------
2 files changed, 3 insertions(+), 59 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2792879d398e..73ea9589e50d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -118,6 +118,7 @@ config X86
select EDAC_SUPPORT
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
@@ -2358,49 +2359,6 @@ choice
endchoice
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- Allow for specifying boot arguments to the kernel at
- build time. On some systems (e.g. embedded ones), it is
- necessary or convenient to provide some or all of the
- kernel boot arguments with the kernel itself (that is,
- to not rely on the boot loader to provide them.)
-
- To compile command line arguments into the kernel,
- set this option to 'Y', then fill in the
- boot arguments in CONFIG_CMDLINE.
-
- Systems with fully functional boot loaders (i.e. non-embedded)
- should leave this option set to 'N'.
-
-config CMDLINE
- string "Built-in kernel command string"
- depends on CMDLINE_BOOL
- default ""
- help
- Enter arguments here that should be compiled into the kernel
- image and used at boot time. If the boot loader provides a
- command line at boot time, it is appended to this string to
- form the full kernel command line, when the system boots.
-
- However, you can use the CONFIG_CMDLINE_OVERRIDE option to
- change this behavior.
-
- In most cases, the command line (whether built-in or provided
- by the boot loader) should specify the device for the root
- file system.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides boot loader arguments"
- depends on CMDLINE_BOOL && CMDLINE != ""
- help
- Set this option to 'Y' to have the kernel ignore the boot loader
- command line, and use ONLY the built-in command line.
-
- This is used to work around broken boot loaders. This should
- be set to 'N' under normal conditions.
-
config MODIFY_LDT_SYSCALL
bool "Enable the LDT (local descriptor table)" if EXPERT
default y
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 5ecd69a48393..cd2aa33c44d7 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -47,6 +47,7 @@
#include <asm/unwind.h>
#include <asm/vsyscall.h>
#include <linux/vmalloc.h>
+#include <linux/cmdline.h>
/*
* max_low_pfn_mapped: highest directly mapped pfn < 4 GB
@@ -161,9 +162,6 @@ unsigned long saved_video_mode;
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
@@ -883,19 +881,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
-
+ cmdline_add_builtin(boot_command_line);
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 7/8] of: allow sending a NULL value to early_init_dt_scan_chosen
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
` (5 preceding siblings ...)
2021-04-16 4:09 ` [PATCH 6/8] CMDLINE: x86: convert to generic builtin command line Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2021-04-16 4:09 ` [PATCH 8/8] CMDLINE: arm64: convert to generic builtin command line Daniel Walker
2022-09-22 20:45 ` [PATCH 0/8] generic command line v4 Sean Anderson
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, Rob Herring,
Frank Rowand
Cc: xe-linux-external, devicetree, linux-kernel
It's possible that an architecture may want to populate
boot_command_line before calling the device tree code.
Currently, early_init_dt_scan_chosen won't accept a NULL
in the data parameter and it returns immediately if you
send one.
I changed early_init_dt_scan_nodes() to send a NULL into
early_init_dt_scan_chosen() , then I made
early_init_dt_scan_chosen() to do the initrd checking, and
the rng-seed checking and skip all the command line related
code.
Given lots of changes to the command line, I think it makes sense
to allow the initrd code and rng-seed code to be run without
forcing the command line handling. I'm also submitting changes
to arm64 which populate boot_command_line much early and this
device tree code overwrites boot_command_line in that case.
This code depends on all architecture to have a NULL
boot_command_line at boot up when this function runs, unless
it's already populated.
This code was boot tested on powerpc 32bit, x86, and arm64.
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
drivers/of/fdt.c | 44 +++++++++++++++++++++++++-------------------
1 file changed, 25 insertions(+), 19 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index adb26aff481d..a1fda952ce60 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1052,36 +1052,38 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
- if (depth != 1 || !data ||
- (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0))
+ if (depth != 1 || (strcmp(uname, "chosen") != 0
+ && strcmp(uname, "chosen@0") != 0))
return 0;
early_init_dt_check_for_initrd(node);
- /* Retrieve command line */
- p = of_get_flat_dt_prop(node, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
+ if (data) {
+ /* Retrieve command line */
+ p = of_get_flat_dt_prop(node, "bootargs", &l);
+ if (p != NULL && l > 0)
+ strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
- * managed to set the command line, unless CONFIG_CMDLINE_FORCE
- * is set in which case we override whatever was found earlier.
- */
+ /*
+ * CONFIG_CMDLINE is meant to be a default in case nothing else
+ * managed to set the command line, unless CONFIG_CMDLINE_FORCE
+ * is set in which case we override whatever was found earlier.
+ */
#ifdef CONFIG_CMDLINE
#if defined(CONFIG_CMDLINE_EXTEND)
- strlcat(data, " ", COMMAND_LINE_SIZE);
- strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+ strlcat(data, " ", COMMAND_LINE_SIZE);
+ strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#elif defined(CONFIG_CMDLINE_FORCE)
- strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
- /* No arguments from boot loader, use kernel's cmdl*/
- if (!((char *)data)[0])
strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#else
+ /* No arguments from boot loader, use kernel's cmdl*/
+ if (!((char *)data)[0])
+ strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif
#endif /* CONFIG_CMDLINE */
- pr_debug("Command line is: %s\n", (char *)data);
+ pr_debug("Command line is: %s\n", (char *)data);
+ }
rng_seed = of_get_flat_dt_prop(node, "rng-seed", &l);
if (rng_seed && l > 0) {
@@ -1202,7 +1204,11 @@ void __init early_init_dt_scan_nodes(void)
int rc = 0;
/* Retrieve various information from the /chosen node */
- rc = of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
+ if (boot_command_line[0])
+ rc = of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+ else
+ rc = of_scan_flat_dt(early_init_dt_scan_chosen,
+ boot_command_line);
if (!rc)
pr_warn("No chosen node found, continuing without\n");
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 8/8] CMDLINE: arm64: convert to generic builtin command line
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
` (6 preceding siblings ...)
2021-04-16 4:09 ` [PATCH 7/8] of: allow sending a NULL value to early_init_dt_scan_chosen Daniel Walker
@ 2021-04-16 4:09 ` Daniel Walker
2022-09-22 20:45 ` [PATCH 0/8] generic command line v4 Sean Anderson
8 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2021-04-16 4:09 UTC (permalink / raw)
To: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, Catalin Marinas
Cc: xe-linux-external, linux-arm-kernel, linux-kernel
This removes arm64 from the device tree handling of the
command line arguments.
The boot_command_line variable is populated inside the earliest
user of the command line, which is in idreg-override.c.
The device tree should not be needed to do any further handling
of the boot command line options.
Cc: xe-linux-external@cisco.com
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
arch/arm64/Kconfig | 33 +-----------------------------
arch/arm64/include/asm/setup.h | 2 ++
arch/arm64/kernel/idreg-override.c | 9 ++++----
3 files changed, 8 insertions(+), 36 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index e4e1b6550115..9781ba3758b1 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -105,6 +105,7 @@ config ARM64
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
select GENERIC_CLOCKEVENTS_BROADCAST
+ select GENERIC_CMDLINE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_EARLY_IOREMAP
@@ -1841,38 +1842,6 @@ config ARM64_ACPI_PARKING_PROTOCOL
protocol even if the corresponding data is present in the ACPI
MADT table.
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- Provide a set of default command-line options at build time by
- entering them here. As a minimum, you should specify the the
- root device (e.g. root=/dev/nfs).
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
- help
- Choose how the kernel will handle the provided default kernel
- command line string.
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-endchoice
-
config EFI_STUB
bool
diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h
index d3320618ed14..1f5b6d8f2433 100644
--- a/arch/arm64/include/asm/setup.h
+++ b/arch/arm64/include/asm/setup.h
@@ -5,7 +5,9 @@
#include <uapi/asm/setup.h>
+#ifndef __ASSEMBLY__
void *get_early_fdt_ptr(void);
void early_fdt_map(u64 dt_phys);
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index 83f1c4b92095..0a3fcae13043 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -9,6 +9,7 @@
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/libfdt.h>
+#include <linux/cmdline.h>
#include <asm/cacheflush.h>
#include <asm/cpufeature.h>
@@ -188,11 +189,11 @@ static __init void parse_cmdline(void)
{
const u8 *prop = get_bootargs_cmdline();
- if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !prop)
- __parse_cmdline(CONFIG_CMDLINE, true);
+ strscpy(boot_command_line, prop, COMMAND_LINE_SIZE);
+ cmdline_add_builtin(boot_command_line);
+
+ __parse_cmdline(boot_command_line, true);
- if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && prop)
- __parse_cmdline(prop, true);
}
/* Keep checkers quiet */
--
2.25.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 0/8] generic command line v4
2021-04-16 4:09 [PATCH 0/8] generic command line v4 Daniel Walker
` (7 preceding siblings ...)
2021-04-16 4:09 ` [PATCH 8/8] CMDLINE: arm64: convert to generic builtin command line Daniel Walker
@ 2022-09-22 20:45 ` Sean Anderson
2022-09-22 20:53 ` Daniel Walker
8 siblings, 1 reply; 17+ messages in thread
From: Sean Anderson @ 2022-09-22 20:45 UTC (permalink / raw)
To: Daniel Walker, Will Deacon, Christophe Leroy, Rob Herring,
Daniel Gimpelevich, Andrew Morton, x86, linux-mips, linuxppc-dev,
H. Peter Anvin, linux-arm-kernel, linux-kernel, devicetree,
linux-kbuild
Cc: linux-efi
On 4/16/21 12:09 AM, Daniel Walker wrote:
>
> v4 release changes
>
> * Updated insert-sys-cert tool to change command line symbols after
> compilation.
>
> This tool is used to release binary kernels internally to companies
> and then later insert certificates for each product by consumers of
> the binary kernel. Cisco uses this tool for this purpose.
>
> Cisco has a similar need for the command line to be modified on a
> binary released kernels similar to how certificates are setup.
>
> * Added global symbols to hold append and prepend values.
>
> These changes follow the system certificate code to allow the
> insert-sys-cert tool to be used.
>
> * Added a test case to confirm functionality.
>
> Seemed sensible to add this to make sure everything is working.
>
> * Dropped powerpc changes
>
> Christophe Leroy has reservations about the features for powerpc. I
> don't think his reservations are founded, and these changes should
> fully work on powerpc. However, I dropped these changes so Christophe
> can have more time to get comfortable with the changes.
>
>
> Enjoy!
>
>
> Daniel Walker (8):
> CMDLINE: add generic builtin command line
> scripts: insert-sys-cert: add command line insert capability
> scripts: insert-sys-cert: change name to insert-symbol
> CMDLINE: mips: convert to generic builtin command line
> drivers: firmware: efi: libstub: enable generic commandline
> CMDLINE: x86: convert to generic builtin command line
> of: allow sending a NULL value to early_init_dt_scan_chosen
> CMDLINE: arm64: convert to generic builtin command line
>
> arch/arm64/Kconfig | 33 +--
> arch/arm64/include/asm/setup.h | 2 +
> arch/arm64/kernel/idreg-override.c | 9 +-
> arch/mips/Kconfig | 4 +-
> arch/mips/Kconfig.debug | 44 ----
> arch/mips/configs/ar7_defconfig | 9 +-
> arch/mips/configs/bcm47xx_defconfig | 8 +-
> arch/mips/configs/bcm63xx_defconfig | 15 +-
> arch/mips/configs/bmips_be_defconfig | 11 +-
> arch/mips/configs/bmips_stb_defconfig | 11 +-
> arch/mips/configs/capcella_defconfig | 11 +-
> arch/mips/configs/ci20_defconfig | 10 +-
> arch/mips/configs/cu1000-neo_defconfig | 10 +-
> arch/mips/configs/cu1830-neo_defconfig | 10 +-
> arch/mips/configs/e55_defconfig | 4 +-
> arch/mips/configs/generic_defconfig | 6 +-
> arch/mips/configs/gpr_defconfig | 18 +-
> arch/mips/configs/loongson3_defconfig | 13 +-
> arch/mips/configs/mpc30x_defconfig | 7 +-
> arch/mips/configs/tb0219_defconfig | 7 +-
> arch/mips/configs/tb0226_defconfig | 7 +-
> arch/mips/configs/tb0287_defconfig | 7 +-
> arch/mips/configs/workpad_defconfig | 11 +-
> arch/mips/include/asm/setup.h | 2 +
> arch/mips/kernel/relocate.c | 17 +-
> arch/mips/kernel/setup.c | 36 +--
> arch/mips/pic32/pic32mzda/early_console.c | 2 +-
> arch/mips/pic32/pic32mzda/init.c | 3 +-
> arch/x86/Kconfig | 44 +---
> arch/x86/kernel/setup.c | 18 +-
> .../firmware/efi/libstub/efi-stub-helper.c | 29 +++
> drivers/firmware/efi/libstub/efi-stub.c | 9 +
> drivers/firmware/efi/libstub/efistub.h | 1 +
> drivers/firmware/efi/libstub/x86-stub.c | 13 +-
> drivers/of/fdt.c | 44 ++--
> include/linux/cmdline.h | 103 ++++++++
> init/Kconfig | 78 ++++++
> lib/Kconfig | 4 +
> lib/Makefile | 3 +
> lib/generic_cmdline.S | 53 ++++
> lib/test_cmdline1.c | 139 ++++++++++
> scripts/Makefile | 2 +-
> .../{insert-sys-cert.c => insert-symbol.c} | 243 ++++++++++++------
> 43 files changed, 716 insertions(+), 394 deletions(-)
> create mode 100644 include/linux/cmdline.h
> create mode 100644 lib/generic_cmdline.S
> create mode 100644 lib/test_cmdline1.c
> rename scripts/{insert-sys-cert.c => insert-symbol.c} (72%)
>
For an arm64 platform (after rebasing):
Tested-by: Sean Anderson <sean.anderson@seco.com>
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 0/8] generic command line v4
2022-09-22 20:45 ` [PATCH 0/8] generic command line v4 Sean Anderson
@ 2022-09-22 20:53 ` Daniel Walker
2022-09-22 21:03 ` Sean Anderson
0 siblings, 1 reply; 17+ messages in thread
From: Daniel Walker @ 2022-09-22 20:53 UTC (permalink / raw)
To: Sean Anderson
Cc: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, H. Peter Anvin,
linux-arm-kernel, linux-kernel, devicetree, linux-kbuild,
linux-efi
On Thu, Sep 22, 2022 at 04:45:01PM -0400, Sean Anderson wrote:
>
>
>
> For an arm64 platform (after rebasing):
>
> Tested-by: Sean Anderson <sean.anderson@seco.com>
Maybe I'll re-submit it.
Daniel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/8] generic command line v4
2022-09-22 20:53 ` Daniel Walker
@ 2022-09-22 21:03 ` Sean Anderson
2022-09-22 21:10 ` Daniel Walker
0 siblings, 1 reply; 17+ messages in thread
From: Sean Anderson @ 2022-09-22 21:03 UTC (permalink / raw)
To: Daniel Walker
Cc: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, H. Peter Anvin,
linux-arm-kernel, linux-kernel, devicetree, linux-kbuild,
linux-efi
On 9/22/22 4:53 PM, Daniel Walker wrote:
> On Thu, Sep 22, 2022 at 04:45:01PM -0400, Sean Anderson wrote:
>>
>>
>>
>> For an arm64 platform (after rebasing):
>>
>> Tested-by: Sean Anderson <sean.anderson@seco.com>
>
> Maybe I'll re-submit it.
>
> Daniel
>
There's still no way to extend the command line on ARM64, since the
existing method was removed in anticipation that your series would be
added.
As recently as last month, someone's patch to add such support was
rejected for this reason [1].
--Sean
[1] https://lore.kernel.org/linux-arm-kernel/20220812084613.GA3107@willie-the-truck/
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/8] generic command line v4
2022-09-22 21:03 ` Sean Anderson
@ 2022-09-22 21:10 ` Daniel Walker
2022-09-22 21:15 ` Daniel Gimpelevich
0 siblings, 1 reply; 17+ messages in thread
From: Daniel Walker @ 2022-09-22 21:10 UTC (permalink / raw)
To: Sean Anderson
Cc: Will Deacon, Christophe Leroy, Rob Herring, Daniel Gimpelevich,
Andrew Morton, x86, linux-mips, linuxppc-dev, H. Peter Anvin,
linux-arm-kernel, linux-kernel, devicetree, linux-kbuild,
linux-efi
On Thu, Sep 22, 2022 at 05:03:46PM -0400, Sean Anderson wrote:
>
>
>
> On 9/22/22 4:53 PM, Daniel Walker wrote:
> > On Thu, Sep 22, 2022 at 04:45:01PM -0400, Sean Anderson wrote:
> >>
> >>
> >>
> >> For an arm64 platform (after rebasing):
> >>
> >> Tested-by: Sean Anderson <sean.anderson@seco.com>
> >
> > Maybe I'll re-submit it.
> >
> > Daniel
> >
>
> There's still no way to extend the command line on ARM64, since the
> existing method was removed in anticipation that your series would be
> added.
>
> As recently as last month, someone's patch to add such support was
> rejected for this reason [1].
>
> --Sean
>
> [1] https://lore.kernel.org/linux-arm-kernel/20220812084613.GA3107@willie-the-truck/
I had no idea.. Thanks for pointing that out. I guess I will re-submit in that
case.
Daniel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/8] generic command line v4
2022-09-22 21:10 ` Daniel Walker
@ 2022-09-22 21:15 ` Daniel Gimpelevich
2022-09-26 22:52 ` Rob Herring
2022-09-26 22:59 ` Daniel Walker
0 siblings, 2 replies; 17+ messages in thread
From: Daniel Gimpelevich @ 2022-09-22 21:15 UTC (permalink / raw)
To: Daniel Walker
Cc: Sean Anderson, Will Deacon, Christophe Leroy, Rob Herring,
Andrew Morton, x86, linux-mips, linuxppc-dev, H. Peter Anvin,
linux-arm-kernel, linux-kernel, devicetree, linux-kbuild,
linux-efi
On Thu, 2022-09-22 at 14:10 -0700, Daniel Walker wrote:
> On Thu, Sep 22, 2022 at 05:03:46PM -0400, Sean Anderson wrote:
[snip]
> > As recently as last month, someone's patch to add such support was
> > rejected for this reason [1].
> >
> > --Sean
> >
> > [1] https://lore.kernel.org/linux-arm-kernel/20220812084613.GA3107@willie-the-truck/
>
>
> I had no idea.. Thanks for pointing that out. I guess I will re-submit in that
> case.
>
> Daniel
This has been happening repeatedly since circa 2014, on multiple
architectures. It's quite frustrating, really.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/8] generic command line v4
2022-09-22 21:15 ` Daniel Gimpelevich
@ 2022-09-26 22:52 ` Rob Herring
2022-09-26 23:03 ` Daniel Walker
2022-09-26 22:59 ` Daniel Walker
1 sibling, 1 reply; 17+ messages in thread
From: Rob Herring @ 2022-09-26 22:52 UTC (permalink / raw)
To: Daniel Gimpelevich, Daniel Walker
Cc: Sean Anderson, Will Deacon, Christophe Leroy, Andrew Morton, x86,
linux-mips, linuxppc-dev, H. Peter Anvin, linux-arm-kernel,
linux-kernel, devicetree, linux-kbuild, linux-efi
On Thu, Sep 22, 2022 at 4:15 PM Daniel Gimpelevich
<daniel@gimpelevich.san-francisco.ca.us> wrote:
>
> On Thu, 2022-09-22 at 14:10 -0700, Daniel Walker wrote:
> > On Thu, Sep 22, 2022 at 05:03:46PM -0400, Sean Anderson wrote:
> [snip]
> > > As recently as last month, someone's patch to add such support was
> > > rejected for this reason [1].
> > >
> > > --Sean
> > >
> > > [1] https://lore.kernel.org/linux-arm-kernel/20220812084613.GA3107@willie-the-truck/
> >
> >
> > I had no idea.. Thanks for pointing that out. I guess I will re-submit in that
> > case.
> >
> > Daniel
>
> This has been happening repeatedly since circa 2014, on multiple
> architectures. It's quite frustrating, really.
It must not be that important. From the last time, IMO Christophe's
version was much closer to being merged than this series. This is not
how you get things upstream:
> * Dropped powerpc changes
> Christophe Leroy has reservations about the features for powerpc. I
> don't think his reservations are founded, and these changes should
> fully work on powerpc. However, I dropped these changes so Christophe
> can have more time to get comfortable with the changes.
Rob
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/8] generic command line v4
2022-09-26 22:52 ` Rob Herring
@ 2022-09-26 23:03 ` Daniel Walker
0 siblings, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2022-09-26 23:03 UTC (permalink / raw)
To: Rob Herring
Cc: Daniel Gimpelevich, Sean Anderson, Will Deacon, Christophe Leroy,
Andrew Morton, x86, linux-mips, linuxppc-dev, H. Peter Anvin,
linux-arm-kernel, linux-kernel, devicetree, linux-kbuild,
linux-efi
On Mon, Sep 26, 2022 at 05:52:18PM -0500, Rob Herring wrote:
> On Thu, Sep 22, 2022 at 4:15 PM Daniel Gimpelevich
> <daniel@gimpelevich.san-francisco.ca.us> wrote:
> >
> > On Thu, 2022-09-22 at 14:10 -0700, Daniel Walker wrote:
> > > On Thu, Sep 22, 2022 at 05:03:46PM -0400, Sean Anderson wrote:
> > [snip]
> > > > As recently as last month, someone's patch to add such support was
> > > > rejected for this reason [1].
> > > >
> > > > --Sean
> > > >
> > > > [1] https://lore.kernel.org/linux-arm-kernel/20220812084613.GA3107@willie-the-truck/
> > >
> > >
> > > I had no idea.. Thanks for pointing that out. I guess I will re-submit in that
> > > case.
> > >
> > > Daniel
> >
> > This has been happening repeatedly since circa 2014, on multiple
> > architectures. It's quite frustrating, really.
>
> It must not be that important. From the last time, IMO Christophe's
> version was much closer to being merged than this series. This is not
> how you get things upstream:
>
> > * Dropped powerpc changes
> > Christophe Leroy has reservations about the features for powerpc. I
> > don't think his reservations are founded, and these changes should
> > fully work on powerpc. However, I dropped these changes so Christophe
> > can have more time to get comfortable with the changes.
>
> Rob
I don't submit often enough, that's true. However, I figured maintainers don't
want the changes. This is a common occurrence in industry, people may submit
once or twice, no traction and they give up. I suppose it's a combination of
problems.
Christophe's don't have the same features, so they are really totally different
but conflicting.
Daniel
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/8] generic command line v4
2022-09-22 21:15 ` Daniel Gimpelevich
2022-09-26 22:52 ` Rob Herring
@ 2022-09-26 22:59 ` Daniel Walker
1 sibling, 0 replies; 17+ messages in thread
From: Daniel Walker @ 2022-09-26 22:59 UTC (permalink / raw)
To: Daniel Gimpelevich
Cc: Sean Anderson, Will Deacon, Christophe Leroy, Rob Herring,
Andrew Morton, x86, linux-mips, linuxppc-dev, H. Peter Anvin,
linux-arm-kernel, linux-kernel, devicetree, linux-kbuild,
linux-efi
On Thu, Sep 22, 2022 at 02:15:44PM -0700, Daniel Gimpelevich wrote:
> On Thu, 2022-09-22 at 14:10 -0700, Daniel Walker wrote:
> > On Thu, Sep 22, 2022 at 05:03:46PM -0400, Sean Anderson wrote:
> [snip]
> > > As recently as last month, someone's patch to add such support was
> > > rejected for this reason [1].
> > >
> > > --Sean
> > >
> > > [1] https://lore.kernel.org/linux-arm-kernel/20220812084613.GA3107@willie-the-truck/
> >
> >
> > I had no idea.. Thanks for pointing that out. I guess I will re-submit in that
> > case.
> >
> > Daniel
>
> This has been happening repeatedly since circa 2014, on multiple
> architectures. It's quite frustrating, really.
I'm not sure I'm following your comments. What's frustrating exactly ?
Daniel
^ permalink raw reply [flat|nested] 17+ messages in thread