[PATCH 0/9] SPMI patches for v6.1

[PATCH 0/9] SPMI patches for v6.1

[Stephen Boyd]

Hi Greg,

Here's my pile of SPMI patches for the next merge window. I'm going to
send an email to get the SPMI kernel.org branch merged into linux-next,
I'll Cc you on the thread. That will provide more robot test coverage.

This patch collection is mostly for Qualcomm's SPMI PMIC arbiter, to fix
various issues found on newer hardware.  There's also a janitorial IDA
patch.

Abhijeet Dharmapurikar (1):
  spmi: pmic-arb: add a print in cleanup_irq

Ashay Jaiswal (1):
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status

David Collins (4):
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: increase SPMI transaction timeout delay

Fenglin Wu (1):
  spmi: pmic-arb: handle spurious interrupt

Subbaraman Narayanamurthy (1):
  spmi: pmic-arb: do not ack and clear peripheral interrupts in
    cleanup_irq

keliu (1):
  drivers: spmi: Directly use ida_alloc()/free()

 drivers/spmi/spmi-pmic-arb.c | 91 +++++++++++++++++++++++++++---------
 drivers/spmi/spmi.c          |  4 +-
 2 files changed, 70 insertions(+), 25 deletions(-)

-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 1/9] drivers: spmi: Directly use ida_alloc()/free()

[Stephen Boyd]

From: keliu <liuke94@huawei.com>

Use ida_alloc()/ida_free() instead of deprecated
ida_simple_get()/ida_simple_remove() .

Signed-off-by: keliu <liuke94@huawei.com>
Link: https://lore.kernel.org/r/20220527071338.2359733-1-liuke94@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index a456ce5141e1..55381592bb5a 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -35,7 +35,7 @@ static void spmi_ctrl_release(struct device *dev)
 {
 	struct spmi_controller *ctrl = to_spmi_controller(dev);
 
-	ida_simple_remove(&ctrl_ida, ctrl->nr);
+	ida_free(&ctrl_ida, ctrl->nr);
 	kfree(ctrl);
 }
 
@@ -457,7 +457,7 @@ struct spmi_controller *spmi_controller_alloc(struct device *parent,
 	ctrl->dev.of_node = parent->of_node;
 	spmi_controller_set_drvdata(ctrl, &ctrl[1]);
 
-	id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL);
+	id = ida_alloc(&ctrl_ida, GFP_KERNEL);
 	if (id < 0) {
 		dev_err(parent,
 			"unable to allocate SPMI controller identifier.\n");
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 2/9] spmi: pmic-arb: add a print in cleanup_irq

[Stephen Boyd]

From: Abhijeet Dharmapurikar <adharmap@codeaurora.org>

The cleanup_irq() was meant to clear and mask interrupts that were
left enabled in the hardware but there was no interrupt handler
registered for it. Add an error print when it gets invoked.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-2-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 2113be40b5a9..5a99723b3f32 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -590,6 +590,8 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 	u8 per = ppid & 0xFF;
 	u8 irq_mask = BIT(id);
 
+	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
+			__func__, apid, sid, per, id);
 	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
 
 	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 3/9] spmi: pmic-arb: handle spurious interrupt

[Stephen Boyd]

From: Fenglin Wu <quic_fenglinw@quicinc.com>

Call handle_bad_irq() when the summary interrupt is fired spuriously.

Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-3-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 5a99723b3f32..719bd73e5153 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -605,10 +605,11 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 				irq_mask, ppid);
 }
 
-static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
+static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
 {
 	unsigned int irq;
 	u32 status, id;
+	int handled = 0;
 	u8 sid = (pmic_arb->apid_data[apid].ppid >> 8) & 0xF;
 	u8 per = pmic_arb->apid_data[apid].ppid & 0xFF;
 
@@ -623,7 +624,10 @@ static void periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
 			continue;
 		}
 		generic_handle_irq(irq);
+		handled++;
 	}
+
+	return handled;
 }
 
 static void pmic_arb_chained_irq(struct irq_desc *desc)
@@ -634,7 +638,7 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 	int first = pmic_arb->min_apid >> 5;
 	int last = pmic_arb->max_apid >> 5;
 	u8 ee = pmic_arb->ee;
-	u32 status, enable;
+	u32 status, enable, handled = 0;
 	int i, id, apid;
 
 	chained_irq_enter(chip, desc);
@@ -649,10 +653,14 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 			enable = readl_relaxed(
 					ver_ops->acc_enable(pmic_arb, apid));
 			if (enable & SPMI_PIC_ACC_ENABLE_BIT)
-				periph_interrupt(pmic_arb, apid);
+				if (periph_interrupt(pmic_arb, apid) != 0)
+					handled++;
 		}
 	}
 
+	if (handled == 0)
+		handle_bad_irq(desc);
+
 	chained_irq_exit(chip, desc);
 }
 
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 4/9] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq

[Stephen Boyd]

From: Subbaraman Narayanamurthy <subbaram@codeaurora.org>

Currently, cleanup_irq() is invoked when a peripheral's interrupt
fires and there is no mapping present in the interrupt domain of
spmi interrupt controller.

The cleanup_irq clears the arbiter bit, clears the pmic interrupt
and disables it at the pmic in that order. The last disable in
cleanup_irq races with request_irq() in that it stomps over the
enable issued by request_irq. Fix this by not writing to the pmic
in cleanup_irq. The latched bit will be left set in the pmic,
which will not send us more interrupts even if the enable bit
stays enabled.

When a client wants to request an interrupt, use the activate
callback on the irq_domain to clear latched bit. This ensures
that the latched, if set due to the above changes in cleanup_irq
or when the bootloader leaves it set, gets cleaned up, paving way
for upcoming interrupts to trigger.

With this, there is a possibility of unwanted triggering of
interrupt right after the latched bit is cleared - the interrupt
may be left enabled too. To avoid that, clear the enable first
followed by clearing the latched bit in the activate callback.

Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs")
Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and other cleanup")
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
[collinsd@codeaurora.org: fix merge conflict]
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-4-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 719bd73e5153..2bc3b88f35c9 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -593,16 +593,6 @@ static void cleanup_irq(struct spmi_pmic_arb *pmic_arb, u16 apid, int id)
 	dev_err_ratelimited(&pmic_arb->spmic->dev, "%s apid=%d sid=0x%x per=0x%x irq=%d\n",
 			__func__, apid, sid, per, id);
 	writel_relaxed(irq_mask, pmic_arb->ver_ops->irq_clear(pmic_arb, apid));
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			(per << 8) + QPNPINT_REG_LATCHED_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
-
-	if (pmic_arb_write_cmd(pmic_arb->spmic, SPMI_CMD_EXT_WRITEL, sid,
-			       (per << 8) + QPNPINT_REG_EN_CLR, &irq_mask, 1))
-		dev_err_ratelimited(&pmic_arb->spmic->dev, "failed to ack irq_mask = 0x%x for ppid = %x\n",
-				irq_mask, ppid);
 }
 
 static int periph_interrupt(struct spmi_pmic_arb *pmic_arb, u16 apid)
@@ -780,6 +770,7 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 	u16 apid = hwirq_to_apid(d->hwirq);
 	u16 sid = hwirq_to_sid(d->hwirq);
 	u16 irq = hwirq_to_irq(d->hwirq);
+	u8 buf;
 
 	if (pmic_arb->apid_data[apid].irq_ee != pmic_arb->ee) {
 		dev_err(&pmic_arb->spmic->dev, "failed to xlate sid = %#x, periph = %#x, irq = %u: ee=%u but owner=%u\n",
@@ -788,6 +779,10 @@ static int qpnpint_irq_domain_activate(struct irq_domain *domain,
 		return -ENODEV;
 	}
 
+	buf = BIT(irq);
+	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &buf, 1);
+	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &buf, 1);
+
 	return 0;
 }
 
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 5/9] spmi: pmic-arb: check apid against limits before calling irq handler

[Stephen Boyd]

From: David Collins <collinsd@codeaurora.org>

Check that the apid for an SPMI interrupt falls between the
min_apid and max_apid that can be handled by the APPS processor
before invoking the per-apid interrupt handler:
periph_interrupt().

This avoids an access violation in rare cases where the status
bit is set for an interrupt that is not owned by the APPS
processor.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-5-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 2bc3b88f35c9..e19eaec30aa5 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -625,21 +625,26 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 	struct spmi_pmic_arb *pmic_arb = irq_desc_get_handler_data(desc);
 	const struct pmic_arb_ver_ops *ver_ops = pmic_arb->ver_ops;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
-	int first = pmic_arb->min_apid >> 5;
-	int last = pmic_arb->max_apid >> 5;
+	int first = pmic_arb->min_apid;
+	int last = pmic_arb->max_apid;
 	u8 ee = pmic_arb->ee;
 	u32 status, enable, handled = 0;
 	int i, id, apid;
 
 	chained_irq_enter(chip, desc);
 
-	for (i = first; i <= last; ++i) {
+	for (i = first >> 5; i <= last >> 5; ++i) {
 		status = readl_relaxed(
 				ver_ops->owner_acc_status(pmic_arb, ee, i));
 		while (status) {
 			id = ffs(status) - 1;
 			status &= ~BIT(id);
 			apid = id + i * 32;
+			if (apid < first || apid > last) {
+				WARN_ONCE(true, "spurious spmi irq received for apid=%d\n",
+					apid);
+				continue;
+			}
 			enable = readl_relaxed(
 					ver_ops->acc_enable(pmic_arb, apid));
 			if (enable & SPMI_PIC_ACC_ENABLE_BIT)
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 6/9] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status

[Stephen Boyd]

From: Ashay Jaiswal <ashayj@codeaurora.org>

Current implementation of SPMI arbiter dispatches interrupt based on the
Arbiter's accumulator status, in some cases the accumulator status may
remain zero and the interrupt remains un-handled. Add logic to dispatch
interrupts based Arbiter's IRQ status if the accumulator status is zero.

Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-6-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index e19eaec30aa5..56f22941d570 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -630,12 +630,18 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 	u8 ee = pmic_arb->ee;
 	u32 status, enable, handled = 0;
 	int i, id, apid;
+	/* status based dispatch */
+	bool acc_valid = false;
+	u32 irq_status = 0;
 
 	chained_irq_enter(chip, desc);
 
 	for (i = first >> 5; i <= last >> 5; ++i) {
 		status = readl_relaxed(
 				ver_ops->owner_acc_status(pmic_arb, ee, i));
+		if (status)
+			acc_valid = true;
+
 		while (status) {
 			id = ffs(status) - 1;
 			status &= ~BIT(id);
@@ -653,6 +659,29 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
 		}
 	}
 
+	/* ACC_STATUS is empty but IRQ fired check IRQ_STATUS */
+	if (!acc_valid) {
+		for (i = first; i <= last; i++) {
+			/* skip if APPS is not irq owner */
+			if (pmic_arb->apid_data[i].irq_ee != pmic_arb->ee)
+				continue;
+
+			irq_status = readl_relaxed(
+					     ver_ops->irq_status(pmic_arb, i));
+			if (irq_status) {
+				enable = readl_relaxed(
+					     ver_ops->acc_enable(pmic_arb, i));
+				if (enable & SPMI_PIC_ACC_ENABLE_BIT) {
+					dev_dbg(&pmic_arb->spmic->dev,
+						"Dispatching IRQ for apid=%d status=%x\n",
+						i, irq_status);
+					if (periph_interrupt(pmic_arb, i) != 0)
+						handled++;
+				}
+			}
+		}
+	}
+
 	if (handled == 0)
 		handle_bad_irq(desc);
 
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 7/9] spmi: pmic-arb: correct duplicate APID to PPID mapping logic

[Stephen Boyd]

From: David Collins <collinsd@codeaurora.org>

Correct the way that duplicate PPID mappings are handled for PMIC
arbiter v5.  The final APID mapped to a given PPID should be the
one which has write owner = APPS EE, if it exists, or if not
that, then the first APID mapped to the PPID, if it exists.

Fixes: 40f318f0ed67 ("spmi: pmic-arb: add support for HW version 5")
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-7-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 56f22941d570..cf92abc51689 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -1031,7 +1031,8 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
 	 * version 5, there is more than one APID mapped to each PPID.
 	 * The owner field for each of these mappings specifies the EE which is
 	 * allowed to write to the APID.  The owner of the last (highest) APID
-	 * for a given PPID will receive interrupts from the PPID.
+	 * which has the IRQ owner bit set for a given PPID will receive
+	 * interrupts from the PPID.
 	 */
 	for (i = 0; ; i++, apidd++) {
 		offset = pmic_arb->ver_ops->apid_map_offset(i);
@@ -1054,16 +1055,16 @@ static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pmic_arb)
 		apid = pmic_arb->ppid_to_apid[ppid] & ~PMIC_ARB_APID_VALID;
 		prev_apidd = &pmic_arb->apid_data[apid];
 
-		if (valid && is_irq_ee &&
-				prev_apidd->write_ee == pmic_arb->ee) {
+		if (!valid || apidd->write_ee == pmic_arb->ee) {
+			/* First PPID mapping or one for this EE */
+			pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
+		} else if (valid && is_irq_ee &&
+			   prev_apidd->write_ee == pmic_arb->ee) {
 			/*
 			 * Duplicate PPID mapping after the one for this EE;
 			 * override the irq owner
 			 */
 			prev_apidd->irq_ee = apidd->irq_ee;
-		} else if (!valid || is_irq_ee) {
-			/* First PPID mapping or duplicate for another EE */
-			pmic_arb->ppid_to_apid[ppid] = i | PMIC_ARB_APID_VALID;
 		}
 
 		apidd->ppid = ppid;
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 8/9] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes

[Stephen Boyd]

From: David Collins <collinsd@codeaurora.org>

The system crashes due to an access permission violation when
writing to a PMIC peripheral which is not owned by the current
ee.  Add a check for PMIC arbiter version 5 for such invalid
write requests and return an error instead of crashing the
system.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-8-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index cf92abc51689..39f25bc26233 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -1133,6 +1133,11 @@ static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
 		offset = 0x10000 * pmic_arb->ee + 0x80 * apid;
 		break;
 	case PMIC_ARB_CHANNEL_RW:
+		if (pmic_arb->apid_data[apid].write_ee != pmic_arb->ee) {
+			dev_err(&pmic_arb->spmic->dev, "disallowed SPMI write to sid=%u, addr=0x%04X\n",
+				sid, addr);
+			return -EPERM;
+		}
 		offset = 0x10000 * apid;
 		break;
 	}
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

[PATCH 9/9] spmi: pmic-arb: increase SPMI transaction timeout delay

[Stephen Boyd]

From: David Collins <collinsd@codeaurora.org>

Increase the SPMI transaction timeout delay from 100 us to
1000 us in order to account for the slower execution time
found on some simulator targets.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Link: https://lore.kernel.org/r/1655004286-11493-11-git-send-email-quic_fenglinw@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/spmi/spmi-pmic-arb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 39f25bc26233..2cf3203b2397 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -91,7 +91,7 @@ enum pmic_arb_channel {
 
 /* Maximum number of support PMIC peripherals */
 #define PMIC_ARB_MAX_PERIPHS		512
-#define PMIC_ARB_TIMEOUT_US		100
+#define PMIC_ARB_TIMEOUT_US		1000
 #define PMIC_ARB_MAX_TRANS_BYTES	(8)
 
 #define PMIC_ARB_APID_MASK		0xFF
-- 
https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/
https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git