* [PATCH v2 0/3] ipmi: fix ipmi memleak and unload bug
@ 2022-10-09 9:18 Zhang Yuchen
2022-10-09 9:18 ` [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected Zhang Yuchen
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Zhang Yuchen @ 2022-10-09 9:18 UTC (permalink / raw)
To: minyard; +Cc: openipmi-developer, linux-kernel, qi.zheng, Zhang Yuchen
Our users have reported a memory leak. The IPMI driver consumes a lot of
memory.
We found this problem because IPMI was slow to release messages after
being disconnected, causing what appeared to be a memory leak.
Fix commit as:
ipmi: fix msg stack when IPMI is disconnected
Two other issues were addressed in the process of solving this problem.
1. Unloading the driver takes a long time.
Fix commit as:
ipmi: fix long wait in unload when IPMI disconnect
2. Memory leaks during driver unloading.
Fix commit as:
ipmi: fix memleak when unload ipmi driver
v1: https://lore.kernel.org/lkml/20221007092617.87597-1-zhangyuchen.lcr@bytedance.com/
Changelog in v1 -> v2 (suggested by corey):
- Change HOSED to the invalid state and not allowed to send.[TESTED]
- Remove incorrect comment.
Zhang Yuchen (3):
ipmi: fix msg stack when IPMI is disconnected
ipmi: fix long wait in unload when IPMI disconnect
ipmi: fix memleak when unload ipmi driver
drivers/char/ipmi/ipmi_kcs_sm.c | 16 +++++++++++-----
drivers/char/ipmi/ipmi_msghandler.c | 5 ++++-
drivers/char/ipmi/ipmi_si_intf.c | 27 +++++++++++++++++++--------
3 files changed, 34 insertions(+), 14 deletions(-)
--
2.30.2
^ permalink raw reply [flat|nested] 5+ messages in thread* [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected 2022-10-09 9:18 [PATCH v2 0/3] ipmi: fix ipmi memleak and unload bug Zhang Yuchen @ 2022-10-09 9:18 ` Zhang Yuchen 2022-10-09 11:03 ` Corey Minyard 2022-10-09 9:18 ` [PATCH v2 2/3] ipmi: fix long wait in unload when IPMI disconnect Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 3/3] ipmi: fix memleak when unload ipmi driver Zhang Yuchen 2 siblings, 1 reply; 5+ messages in thread From: Zhang Yuchen @ 2022-10-09 9:18 UTC (permalink / raw) To: minyard; +Cc: openipmi-developer, linux-kernel, qi.zheng, Zhang Yuchen If you continue to access and send messages at a high frequency (once every 55s) when the IPMI is disconnected, messages will accumulate in intf->[hp_]xmit_msg. If it lasts long enough, it takes up a lot of memory. The reason is that if IPMI is disconnected, each message will be set to IDLE after it returns to HOSED through IDLE->ERROR0->HOSED. The next message goes through the same process when it comes in. This process needs to wait for IBF_TIMEOUT * (MAX_ERROR_RETRIES + 1) = 55s. Each message takes 55S to destroy. This results in a continuous increase in memory. I find that if I wait 5 seconds after the first message fails, the status changes to ERROR0 in smi_timeout(). The next message will return the error code IPMI_NOT_IN_MY_STATE_ERR directly without wait. This is more in line with our needs. So instead of setting each message state to IDLE after it reaches the state HOSED, set state to ERROR0. After testing, the problem has been solved, no matter how many consecutive sends, will not cause continuous memory growth. It also returns to normal immediately after the IPMI is restored. In addition, the HOSED state should also count as invalid. So the HOSED is removed from the invalid judgment in start_kcs_transaction(). The verification operations are as follows: 1. Use BPF to record the ipmi_alloc/free_smi_msg(). $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc %p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}' 2. Exec `date; time for x in $(seq 1 2); do ipmitool mc info; done`. 3. Record the output of `time` and when free all msgs. Before: `time` takes 120s, This is because `ipmitool mc info` send 4 msgs and waits only 15 seconds for each message. Last msg is free after 440s. $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc %p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}' Oct 05 11:40:55 Attaching 2 probes... Oct 05 11:41:12 alloc 0xffff9558a05f0c00 Oct 05 11:41:27 alloc 0xffff9558a05f1a00 Oct 05 11:41:42 alloc 0xffff9558a05f0000 Oct 05 11:41:57 alloc 0xffff9558a05f1400 Oct 05 11:42:07 free 0xffff9558a05f0c00 Oct 05 11:42:07 alloc 0xffff9558a05f7000 Oct 05 11:42:22 alloc 0xffff9558a05f2a00 Oct 05 11:42:37 alloc 0xffff9558a05f5a00 Oct 05 11:42:52 alloc 0xffff9558a05f3a00 Oct 05 11:43:02 free 0xffff9558a05f1a00 Oct 05 11:43:57 free 0xffff9558a05f0000 Oct 05 11:44:52 free 0xffff9558a05f1400 Oct 05 11:45:47 free 0xffff9558a05f7000 Oct 05 11:46:42 free 0xffff9558a05f2a00 Oct 05 11:47:37 free 0xffff9558a05f5a00 Oct 05 11:48:32 free 0xffff9558a05f3a00 $ root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do ipmitool mc info; done Wed Oct 5 11:41:12 CST 2022 No data available Get Device ID command failed No data available No data available No valid response received Get Device ID command failed: Unspecified error No data available Get Device ID command failed No data available No data available No valid response received No data available Get Device ID command failed real 1m55.052s user 0m0.001s sys 0m0.001s After: `time` takes 55s, all msgs is returned and free after 55s. $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc %p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}' Oct 07 16:30:35 Attaching 2 probes... Oct 07 16:30:45 alloc 0xffff955943aa9800 Oct 07 16:31:00 alloc 0xffff955943aacc00 Oct 07 16:31:15 alloc 0xffff955943aa8c00 Oct 07 16:31:30 alloc 0xffff955943aaf600 Oct 07 16:31:40 free 0xffff955943aa9800 Oct 07 16:31:40 free 0xffff955943aacc00 Oct 07 16:31:40 free 0xffff955943aa8c00 Oct 07 16:31:40 free 0xffff955943aaf600 Oct 07 16:31:40 alloc 0xffff9558ec8f7e00 Oct 07 16:31:40 free 0xffff9558ec8f7e00 Oct 07 16:31:40 alloc 0xffff9558ec8f7800 Oct 07 16:31:40 free 0xffff9558ec8f7800 Oct 07 16:31:40 alloc 0xffff9558ec8f7e00 Oct 07 16:31:40 free 0xffff9558ec8f7e00 Oct 07 16:31:40 alloc 0xffff9558ec8f7800 Oct 07 16:31:40 free 0xffff9558ec8f7800 root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do ipmitool mc info; done Fri Oct 7 16:30:45 CST 2022 No data available Get Device ID command failed No data available No data available No valid response received Get Device ID command failed: Unspecified error Get Device ID command failed: 0xd5 Command not supported in present state Get Device ID command failed: Command not supported in present state real 0m55.038s user 0m0.001s sys 0m0.001s Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com> --- drivers/char/ipmi/ipmi_kcs_sm.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index efda90dcf5b3..ecfcb50302f6 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -122,10 +122,10 @@ struct si_sm_data { unsigned long error0_timeout; }; -static unsigned int init_kcs_data(struct si_sm_data *kcs, - struct si_sm_io *io) +static unsigned int init_kcs_data_with_state(struct si_sm_data *kcs, + struct si_sm_io *io, enum kcs_states state) { - kcs->state = KCS_IDLE; + kcs->state = state; kcs->io = io; kcs->write_pos = 0; kcs->write_count = 0; @@ -140,6 +140,12 @@ static unsigned int init_kcs_data(struct si_sm_data *kcs, return 2; } +static unsigned int init_kcs_data(struct si_sm_data *kcs, + struct si_sm_io *io) +{ + return init_kcs_data_with_state(kcs, io, KCS_IDLE); +} + static inline unsigned char read_status(struct si_sm_data *kcs) { return kcs->io->inputb(kcs->io, 1); @@ -270,7 +276,7 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, if (size > MAX_KCS_WRITE_SIZE) return IPMI_REQ_LEN_EXCEEDED_ERR; - if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) { + if (kcs->state != KCS_IDLE) { dev_warn(kcs->io->dev, "KCS in invalid state %d\n", kcs->state); return IPMI_NOT_IN_MY_STATE_ERR; } @@ -495,7 +501,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) } if (kcs->state == KCS_HOSED) { - init_kcs_data(kcs, kcs->io); + init_kcs_data_with_state(kcs, kcs->io, KCS_ERROR0); return SI_SM_HOSED; } -- 2.30.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected 2022-10-09 9:18 ` [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected Zhang Yuchen @ 2022-10-09 11:03 ` Corey Minyard 0 siblings, 0 replies; 5+ messages in thread From: Corey Minyard @ 2022-10-09 11:03 UTC (permalink / raw) To: Zhang Yuchen; +Cc: openipmi-developer, linux-kernel, qi.zheng On Sun, Oct 09, 2022 at 05:18:09PM +0800, Zhang Yuchen wrote: > If you continue to access and send messages at a high frequency (once > every 55s) when the IPMI is disconnected, messages will accumulate in > intf->[hp_]xmit_msg. If it lasts long enough, it takes up a lot of > memory. This is queued for 6.2. Thanks. I already had the other two patches queued. -corey > > The reason is that if IPMI is disconnected, each message will be set to > IDLE after it returns to HOSED through IDLE->ERROR0->HOSED. The next > message goes through the same process when it comes in. This process > needs to wait for IBF_TIMEOUT * (MAX_ERROR_RETRIES + 1) = 55s. > > Each message takes 55S to destroy. This results in a continuous increase > in memory. > > I find that if I wait 5 seconds after the first message fails, the > status changes to ERROR0 in smi_timeout(). The next message will return > the error code IPMI_NOT_IN_MY_STATE_ERR directly without wait. > > This is more in line with our needs. > > So instead of setting each message state to IDLE after it reaches the > state HOSED, set state to ERROR0. > > After testing, the problem has been solved, no matter how many > consecutive sends, will not cause continuous memory growth. It also > returns to normal immediately after the IPMI is restored. > > In addition, the HOSED state should also count as invalid. So the HOSED > is removed from the invalid judgment in start_kcs_transaction(). > > The verification operations are as follows: > > 1. Use BPF to record the ipmi_alloc/free_smi_msg(). > > $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc > %p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}' > > 2. Exec `date; time for x in $(seq 1 2); do ipmitool mc info; done`. > 3. Record the output of `time` and when free all msgs. > > Before: > > `time` takes 120s, This is because `ipmitool mc info` send 4 msgs and > waits only 15 seconds for each message. Last msg is free after 440s. > > $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc > %p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}' > Oct 05 11:40:55 Attaching 2 probes... > Oct 05 11:41:12 alloc 0xffff9558a05f0c00 > Oct 05 11:41:27 alloc 0xffff9558a05f1a00 > Oct 05 11:41:42 alloc 0xffff9558a05f0000 > Oct 05 11:41:57 alloc 0xffff9558a05f1400 > Oct 05 11:42:07 free 0xffff9558a05f0c00 > Oct 05 11:42:07 alloc 0xffff9558a05f7000 > Oct 05 11:42:22 alloc 0xffff9558a05f2a00 > Oct 05 11:42:37 alloc 0xffff9558a05f5a00 > Oct 05 11:42:52 alloc 0xffff9558a05f3a00 > Oct 05 11:43:02 free 0xffff9558a05f1a00 > Oct 05 11:43:57 free 0xffff9558a05f0000 > Oct 05 11:44:52 free 0xffff9558a05f1400 > Oct 05 11:45:47 free 0xffff9558a05f7000 > Oct 05 11:46:42 free 0xffff9558a05f2a00 > Oct 05 11:47:37 free 0xffff9558a05f5a00 > Oct 05 11:48:32 free 0xffff9558a05f3a00 > > $ root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do > ipmitool mc info; done > > Wed Oct 5 11:41:12 CST 2022 > No data available > Get Device ID command failed > No data available > No data available > No valid response received > Get Device ID command failed: Unspecified error > No data available > Get Device ID command failed > No data available > No data available > No valid response received > No data available > Get Device ID command failed > > real 1m55.052s > user 0m0.001s > sys 0m0.001s > > After: > > `time` takes 55s, all msgs is returned and free after 55s. > > $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc > %p\n",retval);} kprobe:free_recv_msg {printf("free %p\n",arg0)}' > > Oct 07 16:30:35 Attaching 2 probes... > Oct 07 16:30:45 alloc 0xffff955943aa9800 > Oct 07 16:31:00 alloc 0xffff955943aacc00 > Oct 07 16:31:15 alloc 0xffff955943aa8c00 > Oct 07 16:31:30 alloc 0xffff955943aaf600 > Oct 07 16:31:40 free 0xffff955943aa9800 > Oct 07 16:31:40 free 0xffff955943aacc00 > Oct 07 16:31:40 free 0xffff955943aa8c00 > Oct 07 16:31:40 free 0xffff955943aaf600 > Oct 07 16:31:40 alloc 0xffff9558ec8f7e00 > Oct 07 16:31:40 free 0xffff9558ec8f7e00 > Oct 07 16:31:40 alloc 0xffff9558ec8f7800 > Oct 07 16:31:40 free 0xffff9558ec8f7800 > Oct 07 16:31:40 alloc 0xffff9558ec8f7e00 > Oct 07 16:31:40 free 0xffff9558ec8f7e00 > Oct 07 16:31:40 alloc 0xffff9558ec8f7800 > Oct 07 16:31:40 free 0xffff9558ec8f7800 > > root@dc00-pb003-t106-n078:~# date;time for x in $(seq 1 2); do > ipmitool mc info; done > Fri Oct 7 16:30:45 CST 2022 > No data available > Get Device ID command failed > No data available > No data available > No valid response received > Get Device ID command failed: Unspecified error > Get Device ID command failed: 0xd5 Command not supported in present state > Get Device ID command failed: Command not supported in present state > > real 0m55.038s > user 0m0.001s > sys 0m0.001s > > Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com> > --- > drivers/char/ipmi/ipmi_kcs_sm.c | 16 +++++++++++----- > 1 file changed, 11 insertions(+), 5 deletions(-) > > diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c > index efda90dcf5b3..ecfcb50302f6 100644 > --- a/drivers/char/ipmi/ipmi_kcs_sm.c > +++ b/drivers/char/ipmi/ipmi_kcs_sm.c > @@ -122,10 +122,10 @@ struct si_sm_data { > unsigned long error0_timeout; > }; > > -static unsigned int init_kcs_data(struct si_sm_data *kcs, > - struct si_sm_io *io) > +static unsigned int init_kcs_data_with_state(struct si_sm_data *kcs, > + struct si_sm_io *io, enum kcs_states state) > { > - kcs->state = KCS_IDLE; > + kcs->state = state; > kcs->io = io; > kcs->write_pos = 0; > kcs->write_count = 0; > @@ -140,6 +140,12 @@ static unsigned int init_kcs_data(struct si_sm_data *kcs, > return 2; > } > > +static unsigned int init_kcs_data(struct si_sm_data *kcs, > + struct si_sm_io *io) > +{ > + return init_kcs_data_with_state(kcs, io, KCS_IDLE); > +} > + > static inline unsigned char read_status(struct si_sm_data *kcs) > { > return kcs->io->inputb(kcs->io, 1); > @@ -270,7 +276,7 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, > if (size > MAX_KCS_WRITE_SIZE) > return IPMI_REQ_LEN_EXCEEDED_ERR; > > - if ((kcs->state != KCS_IDLE) && (kcs->state != KCS_HOSED)) { > + if (kcs->state != KCS_IDLE) { > dev_warn(kcs->io->dev, "KCS in invalid state %d\n", kcs->state); > return IPMI_NOT_IN_MY_STATE_ERR; > } > @@ -495,7 +501,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) > } > > if (kcs->state == KCS_HOSED) { > - init_kcs_data(kcs, kcs->io); > + init_kcs_data_with_state(kcs, kcs->io, KCS_ERROR0); > return SI_SM_HOSED; > } > > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 2/3] ipmi: fix long wait in unload when IPMI disconnect 2022-10-09 9:18 [PATCH v2 0/3] ipmi: fix ipmi memleak and unload bug Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected Zhang Yuchen @ 2022-10-09 9:18 ` Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 3/3] ipmi: fix memleak when unload ipmi driver Zhang Yuchen 2 siblings, 0 replies; 5+ messages in thread From: Zhang Yuchen @ 2022-10-09 9:18 UTC (permalink / raw) To: minyard; +Cc: openipmi-developer, linux-kernel, qi.zheng, Zhang Yuchen When fixing the problem mentioned in PATCH1, we also found the following problem: If the IPMI is disconnected and in the sending process, the uninstallation driver will be stuck for a long time. The main problem is that uninstalling the driver waits for curr_msg to be sent or HOSED. After stopping tasklet, the only place to trigger the timeout mechanism is the circular poll in shutdown_smi. The poll function delays 10us and calls smi_event_handler(smi_info,10). Smi_event_handler deducts 10us from kcs->ibf_timeout. But the poll func is followed by schedule_timeout_uninterruptible(1). The time consumed here is not counted in kcs->ibf_timeout. So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has actually passed. The waiting time has increased by more than a hundredfold. Now instead of calling poll(). call smi_event_handler() directly and calculate the elapsed time. For verification, you can directly use ebpf to check the kcs-> ibf_timeout for each call to kcs_event() when IPMI is disconnected. Decrement at normal rate before unloading. The decrement rate becomes very slow after unloading. $ bpftrace -e 'kprobe:kcs_event {printf("kcs->ibftimeout : %d\n", *(arg0+584));}' Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com> --- drivers/char/ipmi/ipmi_si_intf.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 6e357ad76f2e..abddd7e43a9a 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2153,6 +2153,20 @@ static int __init init_ipmi_si(void) } module_init(init_ipmi_si); +static void wait_msg_processed(struct smi_info *smi_info) +{ + unsigned long jiffies_now; + long time_diff; + + while (smi_info->curr_msg || (smi_info->si_state != SI_NORMAL)) { + jiffies_now = jiffies; + time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies) + * SI_USEC_PER_JIFFY); + smi_event_handler(smi_info, time_diff); + schedule_timeout_uninterruptible(1); + } +} + static void shutdown_smi(void *send_info) { struct smi_info *smi_info = send_info; @@ -2187,16 +2201,13 @@ static void shutdown_smi(void *send_info) * in the BMC. Note that timers and CPU interrupts are off, * so no need for locks. */ - while (smi_info->curr_msg || (smi_info->si_state != SI_NORMAL)) { - poll(smi_info); - schedule_timeout_uninterruptible(1); - } + wait_msg_processed(smi_info); + if (smi_info->handlers) disable_si_irq(smi_info); - while (smi_info->curr_msg || (smi_info->si_state != SI_NORMAL)) { - poll(smi_info); - schedule_timeout_uninterruptible(1); - } + + wait_msg_processed(smi_info); + if (smi_info->handlers) smi_info->handlers->cleanup(smi_info->si_sm); -- 2.30.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 3/3] ipmi: fix memleak when unload ipmi driver 2022-10-09 9:18 [PATCH v2 0/3] ipmi: fix ipmi memleak and unload bug Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 2/3] ipmi: fix long wait in unload when IPMI disconnect Zhang Yuchen @ 2022-10-09 9:18 ` Zhang Yuchen 2 siblings, 0 replies; 5+ messages in thread From: Zhang Yuchen @ 2022-10-09 9:18 UTC (permalink / raw) To: minyard; +Cc: openipmi-developer, linux-kernel, qi.zheng, Zhang Yuchen After the IPMI disconnect problem, the memory kept rising and we tried to unload the driver to free the memory. However, only part of the free memory is recovered after the driver is uninstalled. Using ebpf to hook free functions, we find that neither ipmi_user nor ipmi_smi_msg is free, only ipmi_recv_msg is free. We find that the deliver_smi_err_response call in clean_smi_msgs does the destroy processing on each message from the xmit_msg queue without checking the return value and free ipmi_smi_msg. deliver_smi_err_response is called only at this location. Adding the free handling has no effect. To verify, try using ebpf to trace the free function. $ bpftrace -e 'kretprobe:ipmi_alloc_recv_msg {printf("alloc rcv %p\n",retval);} kprobe:free_recv_msg {printf("free recv %p\n", arg0)} kretprobe:ipmi_alloc_smi_msg {printf("alloc smi %p\n", retval);} kprobe:free_smi_msg {printf("free smi %p\n",arg0)}' Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com> --- drivers/char/ipmi/ipmi_msghandler.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index c8a3b208f923..bd522868efef 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -3710,12 +3710,15 @@ static void deliver_smi_err_response(struct ipmi_smi *intf, struct ipmi_smi_msg *msg, unsigned char err) { + int rv; msg->rsp[0] = msg->data[0] | 4; msg->rsp[1] = msg->data[1]; msg->rsp[2] = err; msg->rsp_size = 3; - /* It's an error, so it will never requeue, no need to check return. */ - handle_one_recv_msg(intf, msg); + + rv = handle_one_recv_msg(intf, msg); + if (rv == 0) + ipmi_free_smi_msg(msg); } static void cleanup_smi_msgs(struct ipmi_smi *intf) -- 2.30.2 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-10-09 11:03 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-10-09 9:18 [PATCH v2 0/3] ipmi: fix ipmi memleak and unload bug Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 1/3] ipmi: fix msg stack when IPMI is disconnected Zhang Yuchen 2022-10-09 11:03 ` Corey Minyard 2022-10-09 9:18 ` [PATCH v2 2/3] ipmi: fix long wait in unload when IPMI disconnect Zhang Yuchen 2022-10-09 9:18 ` [PATCH v2 3/3] ipmi: fix memleak when unload ipmi driver Zhang Yuchen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).