From: Bryan Brattlof <bb@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Keerthy <j-keerthy@ti.com>,
Linux Thermal <linux-pm@vger.kernel.org>,
Linux Device Tree <devicetree@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>,
Linux ARM <linux-arm-kernel@lists.infradead.org>,
Bryan Brattlof <bb@ti.com>
Subject: [PATCH 07/11] arm64: dts: ti: k3-am64-main: add VTM node
Date: Tue, 11 Oct 2022 18:17:23 -0500 [thread overview]
Message-ID: <20221011231727.8090-8-bb@ti.com> (raw)
In-Reply-To: <20221011231727.8090-1-bb@ti.com>
The am64x supports a single VTM module which is located in the main
domain with two associated temperature monitors located at different hot
spots on the die.
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 +++++
arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi | 33 +++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am64.dtsi | 4 +++
3 files changed, 45 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index ada00575f0f2e..4cd687cc44d9e 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1308,4 +1308,12 @@ main_mcan1: can@20711000 {
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
};
+
+ vtm0: temperature-sensor@b00000 {
+ compatible = "ti,j7200-vtm";
+ reg = <0x00 0xb00000 0x00 0x400>,
+ <0x00 0xb01000 0x00 0x400>;
+ power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
new file mode 100644
index 0000000000000..1819a6948b19d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+ main0_thermal: main0-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 0>;
+
+ trips {
+ main0_crit: main0-crit {
+ temperature = <105000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ main1_thermal: main1-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 1>;
+
+ trips {
+ main1_crit: main1-crit {
+ temperature = <105000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
index 016dd8511ca6f..4ebee0be648e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -69,6 +69,7 @@ cbass_main: bus@f4000 {
<0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+ <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
<0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
<0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
<0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
@@ -104,6 +105,9 @@ cbass_mcu: bus@4000000 {
ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
};
};
+
+ #include "k3-am64-thermal.dtsi"
+
};
/* Now include the peripherals for each bus segments */
--
2.38.0
next prev parent reply other threads:[~2022-10-11 23:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 23:17 [PATCH 00/11] enable VTM node of all TI's K3 SoCs Bryan Brattlof
2022-10-11 23:17 ` [PATCH 01/11] thermal: k3_j72xx_bandgap: simplify k3_thermal_get_temp() function Bryan Brattlof
2022-10-11 23:17 ` [PATCH 02/11] thermal: k3_j72xx_bandgap: use bool for i2128 erratum flag Bryan Brattlof
2022-10-11 23:17 ` [PATCH 03/11] thermal: k3_j72xx_bandgap: remove fuse_base from structure Bryan Brattlof
2022-10-11 23:17 ` [PATCH 04/11] thermal: k3_j72xx_bandgap: map fuse_base only for erratum workaround Bryan Brattlof
2022-10-11 23:17 ` [PATCH 05/11] dt-bindings: thermal: k3-j72xx: elaborate on binding descriptions Bryan Brattlof
2022-10-12 13:36 ` Krzysztof Kozlowski
2022-10-12 18:19 ` Bryan Brattlof
2022-10-13 23:30 ` Krzysztof Kozlowski
2022-10-11 23:17 ` [PATCH 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range Bryan Brattlof
2022-10-12 13:19 ` Rob Herring
2022-10-12 13:38 ` Krzysztof Kozlowski
2022-10-12 18:15 ` Bryan Brattlof
2022-10-12 13:39 ` Krzysztof Kozlowski
2022-10-11 23:17 ` Bryan Brattlof [this message]
2022-10-11 23:17 ` [PATCH 08/11] arm64: dts: ti: k3-am62-wakeup: add VTM node Bryan Brattlof
2022-10-11 23:17 ` [PATCH 09/11] arm64: dts: ti: k3-j721e-mcu-wakeup: " Bryan Brattlof
2022-10-11 23:17 ` [PATCH 10/11] arm64: dts: ti: k3-j721s2-mcu-wakeup: " Bryan Brattlof
2022-10-11 23:17 ` [PATCH 11/11] arm64: dts: ti: k3-j7200-mcu-wakeup: " Bryan Brattlof
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011231727.8090-8-bb@ti.com \
--to=bb@ti.com \
--cc=amitk@kernel.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=nm@ti.com \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).