linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Cai Huoqing <cai.huoqing@linux.dev>
To: cai.huoqing@linux.dev
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Zhengchao Shao <shaozhengchao@huawei.com>,
	Bin Chen <bin.chen@corigine.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] net: hinic: Convert the cmd code from decimal to hex to be more readable
Date: Wed, 26 Oct 2022 20:59:10 +0800	[thread overview]
Message-ID: <20221026125922.34080-1-cai.huoqing@linux.dev> (raw)

The print cmd code is in hex, so using hex cmd code intead of
decimal is easy to check the value with print info.

Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
---
 .../net/ethernet/huawei/hinic/hinic_hw_dev.h  | 108 +++++++++---------
 1 file changed, 52 insertions(+), 56 deletions(-)

diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
index d2d89b0a5ef0..abffd967a791 100644
--- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
+++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h
@@ -46,104 +46,100 @@ enum hinic_port_cmd {
 	HINIC_PORT_CMD_VF_REGISTER = 0x0,
 	HINIC_PORT_CMD_VF_UNREGISTER = 0x1,
 
-	HINIC_PORT_CMD_CHANGE_MTU       = 2,
+	HINIC_PORT_CMD_CHANGE_MTU = 0x2,
 
-	HINIC_PORT_CMD_ADD_VLAN         = 3,
-	HINIC_PORT_CMD_DEL_VLAN         = 4,
+	HINIC_PORT_CMD_ADD_VLAN = 0x3,
+	HINIC_PORT_CMD_DEL_VLAN = 0x4,
 
-	HINIC_PORT_CMD_SET_PFC		= 5,
+	HINIC_PORT_CMD_SET_PFC = 0x5,
 
-	HINIC_PORT_CMD_SET_MAC          = 9,
-	HINIC_PORT_CMD_GET_MAC          = 10,
-	HINIC_PORT_CMD_DEL_MAC          = 11,
+	HINIC_PORT_CMD_SET_MAC = 0x9,
+	HINIC_PORT_CMD_GET_MAC = 0xA,
+	HINIC_PORT_CMD_DEL_MAC = 0xB,
 
-	HINIC_PORT_CMD_SET_RX_MODE      = 12,
+	HINIC_PORT_CMD_SET_RX_MODE = 0xC,
 
-	HINIC_PORT_CMD_GET_PAUSE_INFO	= 20,
-	HINIC_PORT_CMD_SET_PAUSE_INFO	= 21,
+	HINIC_PORT_CMD_GET_PAUSE_INFO = 0x14,
+	HINIC_PORT_CMD_SET_PAUSE_INFO = 0x15,
 
-	HINIC_PORT_CMD_GET_LINK_STATE   = 24,
+	HINIC_PORT_CMD_GET_LINK_STATE = 0x18,
 
-	HINIC_PORT_CMD_SET_LRO		= 25,
+	HINIC_PORT_CMD_SET_LRO = 0x19,
 
-	HINIC_PORT_CMD_SET_RX_CSUM	= 26,
+	HINIC_PORT_CMD_SET_RX_CSUM = 0x1A,
 
-	HINIC_PORT_CMD_SET_RX_VLAN_OFFLOAD = 27,
+	HINIC_PORT_CMD_SET_RX_VLAN_OFFLOAD = 0x1B,
 
-	HINIC_PORT_CMD_GET_PORT_STATISTICS = 28,
+	HINIC_PORT_CMD_GET_PORT_STATISTICS = 0x1C,
 
-	HINIC_PORT_CMD_CLEAR_PORT_STATISTICS = 29,
+	HINIC_PORT_CMD_CLEAR_PORT_STATISTICS = 0x1D,
 
-	HINIC_PORT_CMD_GET_VPORT_STAT	= 30,
+	HINIC_PORT_CMD_GET_VPORT_STAT = 0x1E,
 
-	HINIC_PORT_CMD_CLEAN_VPORT_STAT	= 31,
+	HINIC_PORT_CMD_CLEAN_VPORT_STAT	= 0x1F,
 
-	HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 37,
+	HINIC_PORT_CMD_GET_RSS_TEMPLATE_INDIR_TBL = 0x25,
 
-	HINIC_PORT_CMD_SET_PORT_STATE   = 41,
+	HINIC_PORT_CMD_SET_PORT_STATE = 0x29,
 
-	HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 43,
+	HINIC_PORT_CMD_SET_RSS_TEMPLATE_TBL = 0x2B,
+	HINIC_PORT_CMD_GET_RSS_TEMPLATE_TBL = 0x2C,
 
-	HINIC_PORT_CMD_GET_RSS_TEMPLATE_TBL = 44,
+	HINIC_PORT_CMD_SET_RSS_HASH_ENGINE = 0x2D,
+	HINIC_PORT_CMD_GET_RSS_HASH_ENGINE = 0x2E,
 
-	HINIC_PORT_CMD_SET_RSS_HASH_ENGINE = 45,
+	HINIC_PORT_CMD_GET_RSS_CTX_TBL = 0x2F,
+	HINIC_PORT_CMD_SET_RSS_CTX_TBL = 0x30,
 
-	HINIC_PORT_CMD_GET_RSS_HASH_ENGINE = 46,
+	HINIC_PORT_CMD_RSS_TEMP_MGR	= 0x31,
 
-	HINIC_PORT_CMD_GET_RSS_CTX_TBL  = 47,
+	HINIC_PORT_CMD_RD_LINE_TBL = 0x39,
 
-	HINIC_PORT_CMD_SET_RSS_CTX_TBL  = 48,
+	HINIC_PORT_CMD_RSS_CFG = 0x42,
 
-	HINIC_PORT_CMD_RSS_TEMP_MGR	= 49,
+	HINIC_PORT_CMD_FWCTXT_INIT = 0x45,
 
-	HINIC_PORT_CMD_RD_LINE_TBL	= 57,
+	HINIC_PORT_CMD_GET_LOOPBACK_MODE = 0x48,
+	HINIC_PORT_CMD_SET_LOOPBACK_MODE = 0x49,
 
-	HINIC_PORT_CMD_RSS_CFG		= 66,
+	HINIC_PORT_CMD_ENABLE_SPOOFCHK = 0x4E,
 
-	HINIC_PORT_CMD_FWCTXT_INIT      = 69,
+	HINIC_PORT_CMD_GET_MGMT_VERSION = 0x58,
 
-	HINIC_PORT_CMD_GET_LOOPBACK_MODE = 72,
-	HINIC_PORT_CMD_SET_LOOPBACK_MODE,
+	HINIC_PORT_CMD_SET_FUNC_STATE = 0x5D,
 
-	HINIC_PORT_CMD_ENABLE_SPOOFCHK = 78,
+	HINIC_PORT_CMD_GET_GLOBAL_QPN = 0x66,
 
-	HINIC_PORT_CMD_GET_MGMT_VERSION = 88,
+	HINIC_PORT_CMD_SET_VF_RATE = 0x69,
 
-	HINIC_PORT_CMD_SET_FUNC_STATE   = 93,
+	HINIC_PORT_CMD_SET_VF_VLAN = 0x6A,
+	HINIC_PORT_CMD_CLR_VF_VLAN = 0x6B,
 
-	HINIC_PORT_CMD_GET_GLOBAL_QPN   = 102,
+	HINIC_PORT_CMD_SET_TSO = 0x70,
 
-	HINIC_PORT_CMD_SET_VF_RATE = 105,
+	HINIC_PORT_CMD_UPDATE_FW = 0x72,
 
-	HINIC_PORT_CMD_SET_VF_VLAN	= 106,
+	HINIC_PORT_CMD_SET_RQ_IQ_MAP = 0x73,
 
-	HINIC_PORT_CMD_CLR_VF_VLAN,
+	HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xA0,
 
-	HINIC_PORT_CMD_SET_TSO          = 112,
+	HINIC_PORT_CMD_UPDATE_MAC = 0xA4,
 
-	HINIC_PORT_CMD_UPDATE_FW	= 114,
+	HINIC_PORT_CMD_GET_CAP = 0xAA,
 
-	HINIC_PORT_CMD_SET_RQ_IQ_MAP	= 115,
+	HINIC_PORT_CMD_GET_LINK_MODE = 0xD9,
 
-	HINIC_PORT_CMD_LINK_STATUS_REPORT = 160,
+	HINIC_PORT_CMD_SET_SPEED = 0xDA,
 
-	HINIC_PORT_CMD_UPDATE_MAC = 164,
+	HINIC_PORT_CMD_SET_AUTONEG = 0xDB,
 
-	HINIC_PORT_CMD_GET_CAP          = 170,
+	HINIC_PORT_CMD_GET_STD_SFP_INFO = 0xF0,
 
-	HINIC_PORT_CMD_GET_LINK_MODE	= 217,
+	HINIC_PORT_CMD_SET_LRO_TIMER = 0xF4,
 
-	HINIC_PORT_CMD_SET_SPEED	= 218,
+	HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9,
 
-	HINIC_PORT_CMD_SET_AUTONEG	= 219,
-
-	HINIC_PORT_CMD_GET_STD_SFP_INFO = 240,
-
-	HINIC_PORT_CMD_SET_LRO_TIMER	= 244,
-
-	HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 249,
-
-	HINIC_PORT_CMD_GET_SFP_ABS	= 251,
+	HINIC_PORT_CMD_GET_SFP_ABS = 0xFB,
 };
 
 /* cmd of mgmt CPU message for HILINK module */
-- 
2.25.1


             reply	other threads:[~2022-10-26 12:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-26 12:59 Cai Huoqing [this message]
2022-10-26 12:59 ` [PATCH 2/2] net: hinic: Add control command support for VF PMD driver in DPDK Cai Huoqing
2022-10-27 18:03   ` Jakub Kicinski
2022-10-28  4:56     ` Cai Huoqing
2022-10-28 15:56       ` Jakub Kicinski
2022-10-29  7:53         ` Cai Huoqing
2022-10-31 23:52           ` Jakub Kicinski
2022-11-01  1:49             ` Cai Huoqing
2022-11-01  2:58               ` Jakub Kicinski
2022-10-28  1:21   ` shaozhengchao
2022-10-28  5:24     ` Cai Huoqing
2022-10-27 18:02 ` [PATCH 1/2] net: hinic: Convert the cmd code from decimal to hex to be more readable Jakub Kicinski
2022-10-28  4:37   ` Cai Huoqing
2022-10-31  2:17   ` Cai Huoqing
2022-11-01  2:23   ` Cai Huoqing

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221026125922.34080-1-cai.huoqing@linux.dev \
    --to=cai.huoqing@linux.dev \
    --cc=ast@kernel.org \
    --cc=bin.chen@corigine.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=shaozhengchao@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).